Canon imageRUNNER C3200
Рейтинг
Модули
191 CLEANING COOLING FAN ASSEMBLY
330 FIXING FEEDER ASSEMBLY (PLAIN TYPE)
360 DUPLEXING ASSEMBLY (DUPLEX TYPE) 1
560 SECONDARY TRANSFER ASSEMBLY
930 DC CONTROLLER PCB ASSEMBLY
101 MACHINE FRONT PLATE
980 H.V. TRANSFORMER PCB ASSEMBLY
350 FACE-UP DELIVERY ASSEMBLY (PLAIN TYPE)
315 MULTI FEED ASSEMBLY 2
105 INTERNAL COMPONENTS 4
981 2ND TRANSFER H.V.T. PCB ASSEMBLY
270 DEVELOPING DRIVE ASSEMBLY
310 PAPER PICK-UP ASSEMBLY
280 FIXING DRIVE ASSEMBLY
910 DC POWER SUPPLY ASSEMBLY
103 INTERNAL COMPONENTS 2
260 PICK-UP MOTOR DRIVE ASSEMBLY
361 EXTERNAL DELIVERY COVER ASSEMBLY (DUPLEX TYPE)
810 FIXING ASSEMBLY
125 VERTICAL PATH PANEL ASSEMBLY (OLD)
300 CASSETTE
272 TONER CARTRIDGE DRIVE ASSEMBLY
351A DELIVERY VERTICAL PATH ASSEMBLY (NEW) 2
102 INTERNAL COMPONENTS 1
460 LASER UNIT
351A DELIVERY VERTICAL PATH ASSEMBLY (NEW) 1
130 CONTROL PANEL ASSEMBLY
315 MULTI FEED ASSEMBLY 1
900 CONTROLLER ASSEMBLY
106 INTERNAL COMPONENTS 5
535 INTERMEDIATE TRANSFER BELT ASSEMBLY
190 FIXING EXHAUST FAN ASSEMBLY
192 MACHINE EXHAUST FAN ASSEMBLY
321 PATTERN READER ASSEMBLY
120 DOOR SWITCH ASSEMBLY
316 MULTI FEED TRAY ASSEMBLY
193 DELIVERY COOLING FAN ASSEMBLY
305 CASSETTE HEATER ASSEMBLY (OPTION)
360 DUPLEXING ASSEMBLY (DUPLEX TYPE) 2
100 EXTERNAL COVERS, PANELS, ETC.
537 TRANSFER CLEANING ASSEMBLY
108 MACHINE REAR PLATE 2
365 MULTI PAPER FEED MOUNT ASSEMBLY
125A VERTICAL PATH PANEL ASSEMBLY (NEW)
107 MACHINE REAR PLATE 1
251 DRUM DRIVE ASSEMBLY
271 INTERMEDIATE TRANSFER BELT DRIVE ASSEMBLY
351 DELIVERY VERTICAL PATH ASSEMBLY (OLD)
104 INTERNAL COMPONENTS 3
194 MULTI FAN ASSEMBLY (DUPLEX TYPE)
Детали 980 H.V. TRANSFORMER PCB ASSEMBLY
| Деталь: | FAN |
| Парткод: | FH6-1981-020 |
| Деталь: | CLEANING COOLING FAN ASSEMBLY |
| Парткод: | FG6-8995-000 |
| Деталь: | ARM, SWING |
| Парткод: | FB6-3579-000 |
| Деталь: | SHAFT, IDLER GEAR, 1 |
| Парткод: | FB6-3588-000 |
| Деталь: | PIN, ADJUSTMENT |
| Парткод: | FB6-3600-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3638-000 |
| Деталь: | COVER, PAPER FEED |
| Парткод: | FB6-3683-000 |
| Деталь: | LEVER, CLICK, FRONT |
| Парткод: | FB6-3684-000 |
| Деталь: | PIN, SLIDE |
| Парткод: | FB6-3686-000 |
| Деталь: | PLATE, FIXING POSITIONING |
| Парткод: | FB6-3698-000 |
| Деталь: | LEVER, CLICK, REAR |
| Парткод: | FB6-4908-000 |
| Деталь: | ROLLER, LEVER, REAR |
| Парткод: | FB6-4918-000 |
| Деталь: | NUT,HEX,M5 |
| Парткод: | XA9-1624-000 |
| Деталь: | DUCT, CONNECTING, UPPER |
| Парткод: | FB6-3694-000 |
| Деталь: | DUCT, CONNECTING, LOWER |
| Парткод: | FB6-3695-000 |
| Деталь: | PLATE, POSITIONING |
| Парткод: | FF6-2079-000 |
| Деталь: | SHAFT, DELIVERY OPEN/CLOSE |
| Парткод: | FF6-2081-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2862-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1465-000 |
| Деталь: | COLLAR, RAIL |
| Парткод: | FS5-6948-000 |
| Деталь: | COLLAR |
| Парткод: | FS5-6950-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2818-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0520-000 |
| Деталь: | PLATE, ADJUSTMENT |
| Парткод: | FF6-2143-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2861-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2822-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2829-000 |
| Деталь: | GEAR, 30T |
| Парткод: | FU3-0312-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FU3-0313-000 |
| Деталь: | GEAR, 15T |
| Парткод: | FU3-0314-000 |
| Деталь: | GEAR, 15T |
| Парткод: | FU3-0315-000 |
| Деталь: | ROLLER, LEVER, FRONT |
| Парткод: | FB6-3934-000 |
| Деталь: | SHAFT, GEAR |
| Парткод: | FB6-6546-000 |
| Деталь: | PLATE, FACE UP DRIVE |
| Парткод: | FF6-2080-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-407 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | RING,TOOTHED LOCK |
| Парткод: | XD2-2300-602 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-122 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-322 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | FIXING FEEDER ASSEMBLY |
| Парткод: | NPN |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-4873-000 |
| Деталь: | SHAFT, DUPLEXING IDLER |
| Парткод: | FB6-3572-000 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 1 |
| Парткод: | FB6-3888-020 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 2 |
| Парткод: | FB6-6523-000 |
| Деталь: | SPACER |
| Парткод: | FB6-3576-000 |
| Деталь: | HOLDER, DUPLEXING SENSOR |
| Парткод: | FB6-3577-000 |
| Деталь: | FLAG, DUPLEXING SENSOR |
| Парткод: | FB6-3578-000 |
| Деталь: | ARM, SWING |
| Парткод: | FB6-3579-000 |
| Деталь: | GUIDE, DUPLEXING OPEN/CLOSE |
| Парткод: | FB6-3580-000 |
| Деталь: | GUIDE, DUPLEXING, UPPER |
| Парткод: | FM2-6099-000 |
| Деталь: | PLATE, GROUNDING, 1 |
| Парткод: | FB6-3583-000 |
| Деталь: | PLATE, GROUNDING, 2 |
| Парткод: | FB6-3584-000 |
| Деталь: | PLATE, GROUNDING, 3 |
| Парткод: | FB6-3585-000 |
| Деталь: | SHAFT, IDLER GEAR, 1 |
| Парткод: | FB6-3588-000 |
| Деталь: | GUIDE, DUPLEXING AUXILIARY |
| Парткод: | FB6-3589-000 |
| Деталь: | SUPPORT, DRAWER CABLE |
| Парткод: | FB6-3590-000 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 3 |
| Парткод: | FB6-6529-000 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 4 |
| Парткод: | FB6-6530-000 |
| Деталь: | LINK, SOLENOID, 1 |
| Парткод: | FB6-3595-000 |
| Деталь: | LEVER, CLICK, REAR |
| Парткод: | FB6-4908-000 |
| Деталь: | PANEL, EX. DELIVERY FIX, FRONT |
| Парткод: | FF6-2147-000 |
| Деталь: | PANEL, DELIVERY, REAR |
| Парткод: | FB6-3599-000 |
| Деталь: | PIN, ADJUSTMENT |
| Парткод: | FB6-3600-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3638-000 |
| Деталь: | LEVER, CLICK, FRONT |
| Парткод: | FB6-3684-000 |
| Деталь: | PIN, SLIDE |
| Парткод: | FB6-3686-000 |
| Деталь: | ROLLER, LEVER, REAR |
| Парткод: | FB6-4918-000 |
| Деталь: | NUT,HEX,M5 |
| Парткод: | XA9-1624-000 |
| Деталь: | PLATE, FIXING POSITIONING |
| Парткод: | FB6-3698-000 |
| Деталь: | DUCT, JOINT |
| Парткод: | FB6-3880-000 |
| Деталь: | LINK, DELIVERY OPEN/CLOSE |
| Парткод: | FB6-3728-000 |
| Деталь: | PLATE, POSITIONING |
| Парткод: | FF6-2079-000 |
| Деталь: | SHAFT, DELIVERY OPEN/CLOSE |
| Парткод: | FF6-2081-000 |
| Деталь: | LABEL, DUPLEXING HANDLE |
| Парткод: | FB6-3893-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1974-020 |
| Деталь: | CLUTCH, ELECTRO-MAGNETIC |
| Парткод: | FH6-1986-000 |
| Деталь: | SOLENOID |
| Парткод: | FH6-5056-020 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1465-000 |
| Деталь: | ROLLER, LEVER, FRONT |
| Парткод: | FB6-3934-000 |
| Деталь: | BLOCK, ROLLER |
| Парткод: | FS5-1595-000 |
| Деталь: | PULLEY, 32T |
| Парткод: | FS5-3989-000 |
| Деталь: | COLLAR, RAIL |
| Парткод: | FS5-6948-000 |
| Деталь: | COLLAR |
| Парткод: | FS5-6950-000 |
| Деталь: | PULLEY, 28T/GEAR, 35T |
| Парткод: | FS6-3001-000 |
| Деталь: | PULLEY, 28T/GEAR, 24T |
| Парткод: | FS6-3002-000 |
| Деталь: | PULLEY, 32T |
| Парткод: | FS6-3003-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2360-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2924-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2867-000 |
| Деталь: | PLATE, POSITIONING, FRONT |
| Парткод: | FB6-3964-000 |
| Деталь: | PLATE, ADJUSTMENT |
| Парткод: | FF6-2143-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2861-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2822-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2829-000 |
| Деталь: | GEAR, 35T/24T |
| Парткод: | FU3-0310-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FU3-0311-000 |
| Деталь: | GEAR, 30T |
| Парткод: | FU3-0312-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FU3-0313-000 |
| Деталь: | GEAR, 15T |
| Парткод: | FU3-0314-000 |
| Деталь: | GEAR, 15T |
| Парткод: | FU3-0315-000 |
| Деталь: | SHAFT, GEAR |
| Парткод: | FB6-6546-000 |
| Деталь: | BUSHING, CONDUCTIVE |
| Парткод: | RS5-1325-000 |
| Деталь: | CONNECTOR, 25P, MALE |
| Парткод: | VS1-6920-025 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0733-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0734-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0735-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0520-000 |
| Деталь: | CABLE, DUPLEXING |
| Парткод: | FG3-2312-020 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2862-000 |
| Деталь: | CABLE, GROUNDING |
| Парткод: | FG3-3002-000 |
| Деталь: | RACK, SLIDE |
| Парткод: | FB6-3629-020 |
| Деталь: | FLAG, REG. SENSOR |
| Парткод: | FB6-3630-000 |
| Деталь: | MOTOR, STEPPING, DC24V |
| Парткод: | FH6-1253-020 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2832-000 |
| Деталь: | GEAR, 36T/12T |
| Парткод: | FU3-0318-000 |
| Деталь: | CABLE, SIDE REGIST. SENSOR |
| Парткод: | FG3-2313-020 |
| Деталь: | SIDE REGISTRATION DETECT UNIT |
| Парткод: | FG6-9060-000 |
| Деталь: | CLUTCH, ELECTRO-MAGNETIC |
| Парткод: | FH6-5052-020 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-407 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X8 |
| Парткод: | XB1-2300-807 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | SHIM |
| Парткод: | XD1-1104-135 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-322 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | RING,TOOTHED LOCK |
| Парткод: | XD2-2300-602 |
| Деталь: | PIN,SPRING |
| Парткод: | XD3-1300-102 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-122 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-282 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7440-006 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | DUPLEXING ASSEMBLY |
| Парткод: | FG6-9058-190 |
| Деталь: | DUPLEXING ASSEMBLY |
| Парткод: | FM1-0352-160 |
| Деталь: | PLATE, HV CONTACT, 2 |
| Парткод: | FB6-3135-020 |
| Деталь: | PLATE, GROUNDING, 2 |
| Парткод: | FB6-3136-020 |
| Деталь: | GUIDE, SECONDARY TRANSFER, 1 |
| Парткод: | FB6-3146-000 |
| Деталь: | GUIDE, SECONDARY TRANSFER, 2 |
| Парткод: | FB6-3853-000 |
| Деталь: | GUIDE, SECONDARY TRANSFER, 3 |
| Парткод: | FB6-3854-000 |
| Деталь: | GUIDE, SECONDARY TRANSFER, 4 |
| Парткод: | FB6-3855-000 |
| Деталь: | PLATE, ATTRACTION |
| Парткод: | FF6-2127-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2846-000 |
| Деталь: | COLLAR, TRANSFER |
| Парткод: | FB6-3150-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2856-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2857-000 |
| Деталь: | SECONDARY TRANSFER ROLLER UNIT |
| Парткод: | FG6-8997-000 |
| Деталь: | SHEET, SECONDARY TRANSFER |
| Парткод: | FB6-3850-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | FB6-3134-000 |
| Деталь: | HOLDER, STATIC CHARGE |
| Парткод: | FB6-3149-000 |
| Деталь: | HOLDER, BUSHING |
| Парткод: | FB6-3939-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1066-000 |
| Деталь: | GEAR, 48T |
| Парткод: | FU3-0344-000 |
| Деталь: | ROLLER, SECONDARY TRANSFER |
| Парткод: | FC7-0090-000 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-102 |
| Деталь: | SCREW,P,M3X6 |
| Парткод: | XB4-5300-607 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | SECONDARY TRANSFER ASSEMBLY |
| Парткод: | FG6-8993-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | IC, KS4H3U2082CBP, GATE ARRAY |
| Парткод: | FH4-6164-000 |
| Деталь: | DC CONTROLLER PCB ASSEMBLY |
| Парткод: | FG3-3011-020 |
| Деталь: | PIN, HINGE |
| Парткод: | FB1-7173-000 |
| Деталь: | HINGE, FRONT PANEL |
| Парткод: | FB6-2990-000 |
| Деталь: | COVER, CLEANING FAN |
| Парткод: | FB6-3158-000 |
| Деталь: | HANDLE, DRUM UNIT |
| Парткод: | FB6-3195-000 |
| Деталь: | COVER, INTERNAL, UPPER |
| Парткод: | FB6-3196-000 |
| Деталь: | SCREW,W/WASHER,M4X16 |
| Парткод: | XA9-0838-000 |
| Деталь: | PLATE, POSITIONING |
| Парткод: | FF6-2038-000 |
| Деталь: | DRUM UNIT COVER ASSEMBLY |
| Парткод: | FG6-9000-000 |
| Деталь: | SUPPORT, LEAD CAM |
| Парткод: | FF6-2085-000 |
| Деталь: | INTERNAL COVER, LOWER |
| Парткод: | FG6-8991-000 |
| Деталь: | LABEL, ITB LOCK LEVER POSITION |
| Парткод: | FB6-3827-000 |
| Деталь: | LABEL, PROCESS HANDLE POSITION |
| Парткод: | FB6-3828-020 |
| Деталь: | LABEL, T.CRG. LEVER POSITION |
| Парткод: | FB6-3829-000 |
| Деталь: | COLOR LABEL, LEVER, YELLOW |
| Парткод: | FB6-3830-000 |
| Деталь: | COLOR LABEL, LEVER, MAGENTA |
| Парткод: | FB6-3831-000 |
| Деталь: | COLOR LABEL, LEVER, CYAN |
| Парткод: | FB6-3832-000 |
| Деталь: | COLOR LABEL, LEVER, BLACK |
| Парткод: | FB6-3833-000 |
| Деталь: | SCREW,RS,M4X10 |
| Парткод: | XA9-0721-010 |
| Деталь: | LEVER, TONER CARTRIDGE |
| Парткод: | FG6-9005-000 |
| Деталь: | LEVER, TRANSFER PRESSURE |
| Парткод: | FB6-2987-000 |
| Деталь: | SHAFT, HINGE |
| Парткод: | FB6-7003-000 |
| Деталь: | PLATE, CONTACT |
| Парткод: | FB6-3199-000 |
| Деталь: | BUSHING |
| Парткод: | FB6-3202-000 |
| Деталь: | CAM, LEAD |
| Парткод: | FB6-3203-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3205-000 |
| Деталь: | RING, HINGE SHAFT STOP |
| Парткод: | FB6-3207-000 |
| Деталь: | LABEL, COLOR, YELLOW |
| Парткод: | FB6-3819-020 |
| Деталь: | LABEL, COLOR, YELLOW/MAGENTA |
| Парткод: | FB6-3820-020 |
| Деталь: | LABEL, COLOR, MAGENTA/CYAN |
| Парткод: | FB6-3821-020 |
| Деталь: | LABEL, COLOR, CYAN/BLACK |
| Парткод: | FB6-3822-020 |
| Деталь: | PIN, THRUST |
| Парткод: | FF6-2099-000 |
| Деталь: | GUIDE, DRUM UNIT DOOR |
| Парткод: | FF6-2110-000 |
| Деталь: | SPACER |
| Парткод: | FS5-6949-000 |
| Деталь: | SCREW,MACH.,C.S. HEAD,M3X4.5 |
| Парткод: | FS5-9754-020 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2826-000 |
| Деталь: | GEAR, 44T |
| Парткод: | FU3-0308-000 |
| Деталь: | GEAR, 22T |
| Парткод: | FU3-0309-000 |
| Деталь: | MAGNET CATCH |
| Парткод: | XZ9-0585-000 |
| Деталь: | PLATE, LEVER REINFORCEMENT |
| Парткод: | FB6-2988-000 |
| Деталь: | BOTTLE, WASTE TONER |
| Парткод: | FG6-8992-030 |
| Деталь: | LINK, SOLENOID |
| Парткод: | FB6-3631-000 |
| Деталь: | SOLENOID |
| Парткод: | FH6-5088-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2833-000 |
| Деталь: | BUTTON, CLEANING |
| Парткод: | FB6-3282-000 |
| Деталь: | HOLDER, CLEANING BUTTON |
| Парткод: | FB6-3283-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2849-000 |
| Деталь: | COVER, DRUM UNIT DOOR |
| Парткод: | FB6-3194-000 |
| Деталь: | LABEL, LASER WARNING |
| Парткод: | FS7-8332-000 |
| Деталь: | MOUNT, CONTROL PANEL |
| Парткод: | FB6-2995-000 |
| Деталь: | MOUNT,CONTROLL PANELL,LEFT |
| Парткод: | FB6-2996-000 |
| Деталь: | FLAG, BOTTLE DETECT |
| Парткод: | FB6-3124-020 |
| Деталь: | COVER, SENSOR |
| Парткод: | FB6-3127-000 |
| Деталь: | COVER, SWING |
| Парткод: | FF6-2114-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2844-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2845-000 |
| Деталь: | CABLE, WASTE TONER SENSOR |
| Парткод: | FG3-2314-000 |
| Деталь: | WASTE TONER SENSOR PCB ASSY |
| Парткод: | FG3-2374-000 |
| Деталь: | WASTE TONER SENSOR PCB ASSY |
| Парткод: | FG3-2375-000 |
| Деталь: | LABEL, ITB LOCK LEVER |
| Парткод: | FB6-3862-000 |
| Деталь: | LABEL, WASTE TONER WARNING |
| Парткод: | FB6-3882-020 |
| Деталь: | LABEL, WASTE TONER BOTTLE |
| Парткод: | FB6-3860-000 |
| Деталь: | GRIP, BOTTLE |
| Парткод: | FB6-3129-000 |
| Деталь: | COVER, WASTE TONER SHIELD |
| Парткод: | FB6-3883-000 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | SCREW,W/WASHER,M3X8 |
| Парткод: | XB2-8300-807 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-600 |
| Деталь: | SCREW,W/WASHER,M3X10 |
| Парткод: | XB2-8301-009 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-407 |
| Деталь: | PIN,SPRING |
| Парткод: | XD3-1300-102 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | MACHINE FRONT PLATE |
| Парткод: | NPN |
| Деталь: | CABLE, H.V. 1-SUB |
| Парткод: | FG3-2387-000 |
| Деталь: | CABLE, H.V. 1-SUB, 2 |
| Парткод: | FG3-2396-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6318-020 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | H.V.TRANSFORMER PCB ASSEMBLY |
| Парткод: | FG6-9673-030 |
| Деталь: | HOOK, DELIVERY, FRONT |
| Парткод: | FB6-3610-000 |
| Деталь: | HOOK, DELIVERY, REAR |
| Парткод: | FB6-3611-000 |
| Деталь: | KNOB, DELIVERY |
| Парткод: | FB6-3612-000 |
| Деталь: | PANEL, DELIVERY |
| Парткод: | FB6-3700-000 |
| Деталь: | GUIDE, FIXING DELIVERY |
| Парткод: | FB6-3702-000 |
| Деталь: | DEFLECTOR, FACE-UP |
| Парткод: | FB6-3703-000 |
| Деталь: | ROLLER, DELIVERY |
| Парткод: | FB6-3935-020 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3705-000 |
| Деталь: | DUCT, DELIVERY, UPPER |
| Парткод: | FB6-3706-000 |
| Деталь: | DUCT, DELIVERY, LOWER |
| Парткод: | FB6-3707-000 |
| Деталь: | ROLLER, 2 |
| Парткод: | FS5-6946-000 |
| Деталь: | GEAR, 32T |
| Парткод: | FS7-0128-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2823-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2828-000 |
| Деталь: | GEAR, 16T/13T |
| Парткод: | FU3-0301-000 |
| Деталь: | GEAR, 21T |
| Парткод: | FU3-0317-000 |
| Деталь: | BUSHING |
| Парткод: | RS5-1060-000 |
| Деталь: | BUSHING, CONDUCTIVE |
| Парткод: | RS5-1325-000 |
| Деталь: | LABEL, FIXING DOOR OPEN/CLOSE |
| Парткод: | FB6-3846-000 |
| Деталь: | LABEL, FIXING LEVER OPEN/CLOSE |
| Парткод: | FB6-3847-000 |
| Деталь: | LABEL, FIXING JAM |
| Парткод: | FB6-3848-000 |
| Деталь: | PAD |
| Парткод: | FB6-3936-000 |
| Деталь: | COVER, PROTECTION |
| Парткод: | FB6-6222-000 |
| Деталь: | SCREW,TP,M4X6 |
| Парткод: | XB6-7400-607 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,TOOTHED LOCK |
| Парткод: | XD2-2300-402 |
| Деталь: | FACE-UP DELIVERY ASSEMBLY |
| Парткод: | FG6-9068-000 |
| Деталь: | DUCT, CORD |
| Парткод: | FB6-3314-000 |
| Деталь: | PANEL, BLANKING |
| Парткод: | FB6-3472-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2811-000 |
| Деталь: | SCREW,RS,M4X10 |
| Парткод: | XA9-0721-010 |
| Деталь: | BUSHING |
| Парткод: | FA1-0056-000 |
| Деталь: | RING, RETAINING |
| Парткод: | FC6-5046-000 |
| Деталь: | BALL BEARING, MF128ZZ1MC3D4M |
| Парткод: | XG9-0211-000 |
| Деталь: | ROLLER, PAPER PICK-UP |
| Парткод: | FB1-8581-000 |
| Деталь: | ROLLER, SEPARATION |
| Парткод: | FB5-0873-000 |
| Деталь: | ROLLER, REGISTRATION, LOWER |
| Парткод: | FB6-4849-010 |
| Деталь: | SHEET, REGISTRATION, LOWER |
| Парткод: | FB6-3302-000 |
| Деталь: | FLAG, REGISTRATION SENSOR |
| Парткод: | FB6-3303-000 |
| Деталь: | ROLLER, REGISTRATION, FRONT |
| Парткод: | FB6-6524-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3305-000 |
| Деталь: | GUIDE, INLET |
| Парткод: | FC7-0047-000 |
| Деталь: | GUIDE, REGISTRATION, UPPER |
| Парткод: | FB6-3308-000 |
| Деталь: | ROLLER, REGISTRATION, UPPER |
| Парткод: | FB6-3309-000 |
| Деталь: | LEVER, PRESSURE, FRONT |
| Парткод: | FB6-3310-000 |
| Деталь: | LEVER, PRESSURE, REAR |
| Парткод: | FB6-3311-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-3313-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3315-000 |
| Деталь: | GUIDE, DUPLEXING, EXTERNAL |
| Парткод: | FC7-0048-000 |
| Деталь: | ROLLER, RE-PICK UP |
| Парткод: | FB6-6525-000 |
| Деталь: | GUIDE, DUPLEXING, INTERNAL |
| Парткод: | FC7-3374-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-4873-000 |
| Деталь: | SHEET, REGISTRATION, LOWER |
| Парткод: | FB6-3317-000 |
| Деталь: | LIMITER, TORQUE |
| Парткод: | FB6-3410-000 |
| Деталь: | SHAFT, ROLLER |
| Парткод: | FF6-2136-000 |
| Деталь: | CLUTCH |
| Парткод: | FB6-3463-000 |
| Деталь: | HOLDER, SEPARATION ROLLER |
| Парткод: | FB6-3464-000 |
| Деталь: | ARM, LIFTING PLATE PRESSURE |
| Парткод: | FB6-3465-000 |
| Деталь: | CAM, JOINT |
| Парткод: | FB6-3466-000 |
| Деталь: | GEAR, 27T |
| Парткод: | FB6-3467-000 |
| Деталь: | GUIDE, MAIN |
| Парткод: | FF6-2134-000 |
| Деталь: | GUIDE, SUB |
| Парткод: | FB6-3470-000 |
| Деталь: | FLAG, PAPER SENSOR |
| Парткод: | FB6-3471-000 |
| Деталь: | SHAFT, SEPARATION ROLLER |
| Парткод: | FL2-8140-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1973-020 |
| Деталь: | SOLENOID |
| Парткод: | FK2-0115-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS2-2783-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1209-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1512-000 |
| Деталь: | BLOCK, ROLLER |
| Парткод: | FS5-1595-000 |
| Деталь: | RING, RETAINING |
| Парткод: | FC6-9867-000 |
| Деталь: | COLLAR, REGISTRATION MULTI |
| Парткод: | FS5-6945-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1055-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1057-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1058-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2787-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2860-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2925-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2926-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2812-010 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2927-000 |
| Деталь: | GEAR, 63T |
| Парткод: | FU3-0270-000 |
| Деталь: | GEAR, 32T |
| Парткод: | FU3-0271-000 |
| Деталь: | GEAR, 23T/75T |
| Парткод: | FU3-0272-000 |
| Деталь: | GEAR, 28T |
| Парткод: | FU3-0273-000 |
| Деталь: | GEAR, 43T/31T |
| Парткод: | FU3-0274-000 |
| Деталь: | GEAR, 39T/26T |
| Парткод: | FU3-0275-000 |
| Деталь: | GEAR, 25T |
| Парткод: | FU3-0276-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0277-000 |
| Деталь: | GEAR, 23T |
| Парткод: | FU3-0278-000 |
| Деталь: | GEAR, 44T |
| Парткод: | FU3-0295-000 |
| Деталь: | GEAR, 24T |
| Парткод: | FU3-0296-000 |
| Деталь: | GEAR, 36T |
| Парткод: | FU3-0297-000 |
| Деталь: | GEAR, 27T/18T |
| Парткод: | FU3-0298-000 |
| Деталь: | ROLLER, ARM |
| Парткод: | RB1-2152-000 |
| Деталь: | PRISM |
| Парткод: | RB2-5850-000 |
| Деталь: | OHT SENSOR UNIT |
| Парткод: | RH7-7129-020 |
| Деталь: | BUSHING |
| Парткод: | RS5-1567-000 |
| Деталь: | CABLE, REGIST. MULTI, 1 |
| Парткод: | FG3-2303-000 |
| Деталь: | CABLE, REGIST. MULTI, 2 |
| Парткод: | FG3-2304-020 |
| Деталь: | PANEL, REGIST. MULTI, RIGHT |
| Парткод: | FB6-3473-000 |
| Деталь: | BUTTON, REGIST. MULTI PUSH |
| Парткод: | FB6-3474-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2813-000 |
| Деталь: | PLATE, SHEET SUPPORT |
| Парткод: | FB6-4938-000 |
| Деталь: | LABEL, SAFETY OPERATION |
| Парткод: | FB6-3858-000 |
| Деталь: | LABEL, SAFETY OPERATION |
| Парткод: | FB6-6217-000 |
| Деталь: | LABEL, JAM PAPER |
| Парткод: | FB6-3859-000 |
| Деталь: | LABEL, JAM PAPER |
| Парткод: | FB6-6218-000 |
| Деталь: | LABEL, MULTI HANDLE |
| Парткод: | FB6-3863-000 |
| Деталь: | LABEL, GUIDE HANDLE |
| Парткод: | FB6-3864-000 |
| Деталь: | HOLDER, CONNECTOR |
| Парткод: | FB6-4863-000 |
| Деталь: | SCREW,STEPPED,M3 |
| Парткод: | FS5-9761-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2863-000 |
| Деталь: | SHIM |
| Парткод: | FB2-6285-020 |
| Деталь: | SHEET, PUSH-ON |
| Парткод: | FB6-3878-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,P,M3X10 |
| Парткод: | XB4-5301-007 |
| Деталь: | SCREW,P,M4X10 |
| Парткод: | XB4-5401-007 |
| Деталь: | SCREW,W/WASHER,M4X8 |
| Парткод: | XB2-8400-807 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-102 |
| Деталь: | SCREW,W/WASHER,M4X10 |
| Парткод: | XB2-8401-007 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-142 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-282 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7440-006 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | MULTI FEED ASSEMBLY |
| Парткод: | FG6-9080-000 |
| Деталь: | MULTI FEED ASSEMBLY |
| Парткод: | FG6-9081-000 |
| Деталь: | MULTI FEED ASSEMBLY |
| Парткод: | FM1-0354-000 |
| Деталь: | PLATE, SCANNER ADJUSTMENT |
| Парткод: | FB6-3261-000 |
| Деталь: | COVER, LASER, 1 |
| Парткод: | FB6-3262-000 |
| Деталь: | COVER, LASER, 2 |
| Парткод: | FB6-3263-000 |
| Деталь: | KEY, SWITCH |
| Парткод: | FF2-5915-000 |
| Деталь: | CABLE, KEY SWITCH |
| Парткод: | FG3-3004-020 |
| Деталь: | CABLE, DRAWER |
| Парткод: | FG3-2346-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2796-000 |
| Деталь: | SCREW,STEPPED,M3 |
| Парткод: | FS5-9758-020 |
| Деталь: | FLAG, FIXING/FEEDER SENSOR |
| Парткод: | FB6-3143-030 |
| Деталь: | COVER, DRAWER CONNECTOR |
| Парткод: | FB6-3145-000 |
| Деталь: | DUCT, CLEANING |
| Парткод: | FF6-2034-000 |
| Деталь: | MOUNT, DRAWER CABLE |
| Парткод: | FB6-3366-000 |
| Деталь: | SEAL, DUCT |
| Парткод: | FB6-3839-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | SCREW,RS STEPPED,M3 |
| Парткод: | FS5-9760-020 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2848-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2853-000 |
| Деталь: | SWITCH, INTERLOCK |
| Парткод: | RH7-6037-000 |
| Деталь: | CABLE, FIXING CROSSMEMBER |
| Парткод: | FG3-2309-000 |
| Деталь: | CABLE, FIXING DRAWER |
| Парткод: | FG3-2310-000 |
| Деталь: | CABLE, SCANNER, YELLOW |
| Парткод: | FG3-2352-000 |
| Деталь: | CABLE, SCANNER, MAGENTA |
| Парткод: | FG3-2353-000 |
| Деталь: | CABLE, SCANNER, CYAN |
| Парткод: | FG3-2354-000 |
| Деталь: | CABLE, SCANNER, BLACK |
| Парткод: | FG3-2364-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-006 |
| Деталь: | RECONDITIONED CABLE,CONTROLLER |
| Парткод: | FG3-3005-02U |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-014 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | CABLE,SCANNER |
| Парткод: | FG3-2300-000 |
| Деталь: | BASE RECONDITIONED |
| Парткод: | FG6-8996-00U |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6319-030 |
| Деталь: | CONNECTOR, DRAWER |
| Парткод: | VS1-6919-031 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-004 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-005 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6318-013 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6318-011 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6319-036 |
| Деталь: | CROSSMEMBER SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | SCREW,W/WASHER,M2.3X12 |
| Парткод: | XB2-4231-207 |
| Деталь: | SCREW,W/WASHER,M4X8 |
| Парткод: | XB2-8400-807 |
| Деталь: | SHIM |
| Парткод: | XD1-1104-135 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-242 |
| Деталь: | SCREW,TAPPING,PAN HEAD,M2.6X8 |
| Парткод: | XB4-6260-807 |
| Деталь: | SCREW,W/WASHER,M3X10 |
| Парткод: | XB2-8301-009 |
| Деталь: | INTERNAL COMPONENTS 4 |
| Парткод: | NPN |
| Деталь: | CASE, 2ND TRANSFER H.V.T. |
| Парткод: | FB6-3095-000 |
| Деталь: | COVER, 2ND TRANSFER H.V.T. |
| Парткод: | FB6-3096-000 |
| Деталь: | CABLE, H.V., 3 |
| Парткод: | FG3-2385-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-010 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | 2ND. TRANSFER H.V.T. PCB ASSY |
| Парткод: | FG6-9674-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1973-020 |
| Деталь: | GEAR, 42T/27T |
| Парткод: | FU3-0337-000 |
| Деталь: | CABLE, DEVELOPING DRIVE |
| Парткод: | FG3-2326-010 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-008 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | SHIM |
| Парткод: | XD1-1106-212 |
| Деталь: | DEVELOPING DRIVE ASSEMBLY |
| Парткод: | FG6-8966-030 |
| Деталь: | HOLDER, PAPER PICK-UP ROLLER |
| Парткод: | FB6-3380-020 |
| Деталь: | GUIDE, RETARD |
| Парткод: | FB6-3386-010 |
| Деталь: | GUIDE, VERTICAL PATH |
| Парткод: | FB6-3387-000 |
| Деталь: | ROD, SEPARATION ROLLER RELEASE |
| Парткод: | FB6-3388-000 |
| Деталь: | CLAW, PICK-UP |
| Парткод: | FB6-3389-000 |
| Деталь: | CLAW, PAPER PICK-UP |
| Парткод: | FC8-1178-000 |
| Деталь: | GEAR, RATCHET |
| Парткод: | FB6-3391-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB6-3392-020 |
| Деталь: | PICK-UP ARM UNIT |
| Парткод: | FM3-4146-000 |
| Деталь: | ARM, LIFTING |
| Парткод: | FC9-7253-000 |
| Деталь: | ARM, PAPER FEED SHAFT |
| Парткод: | FB6-3395-000 |
| Деталь: | LOCK, PICK-UP |
| Парткод: | FB6-3396-010 |
| Деталь: | FLAG, PAPER SENSOR |
| Парткод: | FB6-3397-000 |
| Деталь: | FLAG, PAPER DETECT SENSOR |
| Парткод: | FB6-3398-000 |
| Деталь: | FLAG, REGISTRATION SENSOR |
| Парткод: | FL2-6580-000 |
| Деталь: | ROLLER, VERTICAL PATH |
| Парткод: | FB6-4852-000 |
| Деталь: | LIMITER, TORQUE |
| Парткод: | FB6-3410-000 |
| Деталь: | GEAR, RATCHET |
| Парткод: | FB6-3402-000 |
| Деталь: | COUPLING, FEED SHAFT STOP |
| Парткод: | FB6-3403-000 |
| Деталь: | COUPLING, SEPARATION SHAFT |
| Парткод: | FB6-3404-000 |
| Деталь: | ROLLER, PAPER PICK-UP |
| Парткод: | FB6-3405-000 |
| Цена: | 550 ₽ |
| Деталь: | ROLLER, FEED |
| Парткод: | FC6-7083-000 |
| Деталь: | SHAFT, PAPER PICK-UP DRIVE |
| Парткод: | FB6-3408-000 |
| Деталь: | CAM, LOCK |
| Парткод: | FB6-7078-000 |
| Деталь: | SHAFT, PAPER FEED ROLLER |
| Парткод: | FF6-2058-000 |
| Деталь: | HOLDER, SEPARATION ROLLER |
| Парткод: | FM4-2525-000 |
| Деталь: | SOLENOID |
| Парткод: | FK2-0408-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | COLLAR, PAPER PICK-UP SHAFT |
| Парткод: | FB6-3413-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1205-000 |
| Деталь: | RING, RETAINING |
| Парткод: | FC6-9867-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1063-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2797-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2684-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2800-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2801-000 |
| Деталь: | BUSHING |
| Парткод: | FU5-1763-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2803-000 |
| Деталь: | SHAFT, IDLER, 2 |
| Парткод: | FS7-5909-000 |
| Деталь: | SHAFT, IDLER, 3 |
| Парткод: | FS7-5910-000 |
| Деталь: | GEAR, 15T |
| Парткод: | FU3-0280-000 |
| Деталь: | GEAR, 41T |
| Парткод: | FU3-0349-000 |
| Деталь: | GEAR, 21T |
| Парткод: | FU3-0282-000 |
| Деталь: | GEAR, 21T |
| Парткод: | FU3-0283-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0284-000 |
| Деталь: | GEAR, 16T/16T |
| Парткод: | FU6-0710-000 |
| Деталь: | GEAR, 21T |
| Парткод: | FU3-0288-000 |
| Деталь: | GEAR, 14T |
| Парткод: | FU3-0289-000 |
| Деталь: | GEAR, 46T |
| Парткод: | FF6-2397-000 |
| Деталь: | GEAR, 51T |
| Парткод: | FU7-0444-000 |
| Деталь: | GEAR, 42T |
| Парткод: | FU7-0445-000 |
| Деталь: | GEAR, 41T/41T |
| Парткод: | FU3-0350-000 |
| Деталь: | GEAR, 41T |
| Парткод: | FU3-0347-000 |
| Деталь: | DAMPER |
| Парткод: | RB1-6539-000 |
| Деталь: | JOINT |
| Парткод: | RB1-8945-000 |
| Деталь: | BUSHING |
| Парткод: | RS5-1567-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-014 |
| Деталь: | SCREW,RS,M3X10 |
| Парткод: | XA9-0656-000 |
| Деталь: | CABLE, PAPER PICK-UP |
| Парткод: | FG3-2302-020 |
| Деталь: | BUSHING |
| Парткод: | FS5-1943-000 |
| Деталь: | ROLLER, SEPARATION |
| Парткод: | FC6-6661-000 |
| Цена: | 600 ₽ |
| Деталь: | SPRING, PICK-UP LOCK |
| Парткод: | FU6-2784-000 |
| Деталь: | STOPPER, ROLLER |
| Парткод: | FC7-5845-000 |
| Деталь: | RING, E |
| Парткод: | XD9-0136-000 |
| Деталь: | PIN, PARALLEL |
| Парткод: | XD9-0289-000 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-600 |
| Деталь: | SCREW, P, M4X10 |
| Парткод: | XB4-5401-005 |
| Деталь: | SCREW, MACHINE M3X6 |
| Парткод: | XB1-3300-605 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | PAPER PICK-UP ASSEMBLY |
| Парткод: | FM2-8204-000 |
| Деталь: | ARM, FIXING SWING |
| Парткод: | FF6-2044-000 |
| Деталь: | WASHER |
| Парткод: | FS5-6488-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2835-000 |
| Деталь: | GEAR, 72T |
| Парткод: | FU3-0338-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FU3-0339-000 |
| Деталь: | GEAR, 36T/18T |
| Парткод: | FU3-0340-000 |
| Деталь: | GEAR, 23T |
| Парткод: | FU3-0341-000 |
| Деталь: | GEAR, 33T/20T |
| Парткод: | FU3-0342-000 |
| Деталь: | WASHER |
| Парткод: | FB6-3237-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0532-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FG6-9079-010 |
| Деталь: | SCREW,TP,M3X6 |
| Парткод: | XB6-7300-607 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-162 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | FIXING DRIVE ASSEMBLY |
| Парткод: | FG6-9011-040 |
| Деталь: | CORD, POWER SUPPLY |
| Парткод: | FH2-7080-000 |
| Деталь: | POWER CORD |
| Парткод: | FH2-6719-000 |
| Деталь: | POWER CORD |
| Парткод: | FH2-7078-000 |
| Деталь: | DC FUSE PCB ASSEMBLY |
| Парткод: | FG3-3020-020 |
| Деталь: | SHEET, MESH |
| Парткод: | FB6-3235-000 |
| Деталь: | FAN |
| Парткод: | FH6-1979-030 |
| Деталь: | BREAKER, CIRCUIT |
| Парткод: | FH7-7626-000 |
| Деталь: | BREAKER, CIRCUIT |
| Парткод: | FH7-7625-030 |
| Деталь: | POWER CORD |
| Парткод: | FH2-7081-000 |
| Деталь: | POWER CORD |
| Парткод: | FH2-7082-000 |
| Деталь: | DC POWER SUPPLY PCB ASSEMBLY |
| Парткод: | FM1-0408-040 |
| Деталь: | DC POWER SUPPLY PCB ASSEMBLY |
| Парткод: | FM1-0409-060 |
| Деталь: | CORD, POWER,220V |
| Парткод: | FH2-7170-000 |
| Деталь: | SET, CIRCUIT BREAKER |
| Парткод: | FM1-0418-000 |
| Деталь: | SET, CIRCUIT BREAKER |
| Парткод: | FM1-0419-000 |
| Деталь: | CABLE, HEATER CONTROL |
| Парткод: | FF3-4436-020 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-603 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X20 |
| Парткод: | XB1-2402-007 |
| Деталь: | SCREW,MACH.,TRUSS HEAD, M4X30 |
| Парткод: | XB1-2403-007 |
| Деталь: | WASHER,TOOTHED LOCK |
| Парткод: | XD1-4200-402 |
| Деталь: | DC POWER SUPPLY ASSEMBLY |
| Парткод: | NPN |
| Деталь: | RAIL, TRANSFER, FRONT |
| Парткод: | FB6-2991-000 |
| Деталь: | PLATE, SPEAKER MOUNT |
| Парткод: | FB6-3005-000 |
| Деталь: | BLOCK, REG. SENSOR POSITION, R |
| Парткод: | FB6-3288-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3289-000 |
| Деталь: | SHAFT, POSITIONING |
| Парткод: | FB6-3371-000 |
| Деталь: | CABLE, ENVIRONMENT SENSOR |
| Парткод: | FG3-2319-000 |
| Деталь: | ENVIRONMENT SENSOR UNIT |
| Парткод: | FH7-7602-020 |
| Деталь: | PLATE, OPEN/CLOSE PIN |
| Парткод: | FF6-2047-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-2960-000 |
| Деталь: | ARM, PRESSURE, FRONT |
| Парткод: | FB6-2961-000 |
| Деталь: | LEVER, LOCK |
| Парткод: | FC8-3770-000 |
| Деталь: | CAM, SWING |
| Парткод: | FB6-2968-000 |
| Деталь: | SUPPORT, SWING SHAFT, FRONT |
| Парткод: | FF6-2016-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2785-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-2964-000 |
| Деталь: | ARM, PRESSURE, REAR |
| Парткод: | FB6-2967-000 |
| Деталь: | SUPPORT, SWING SHAFT, REAR |
| Парткод: | FF6-2017-000 |
| Деталь: | CAM, CLEANING, 1 |
| Парткод: | FB6-3278-000 |
| Деталь: | CAM, CLEANING, 2 |
| Парткод: | FB6-3279-000 |
| Деталь: | SHAFT, CLEANING CAM |
| Парткод: | FB6-3280-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB6-3281-000 |
| Деталь: | BLOCK, REG. SENSOR POSITION, F |
| Парткод: | FB6-3277-000 |
| Деталь: | RAIL, DRUM UNIT |
| Парткод: | FB6-3172-000 |
| Деталь: | COVER, ENVIRONMENT SENSOR |
| Парткод: | FB6-3285-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-004 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | SCREW,TP,M3X8 |
| Парткод: | XB6-7300-807 |
| Деталь: | SCREW,TP,M3X4 |
| Парткод: | XB6-7300-407 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | INTERNAL COMPONENTS 2 |
| Парткод: | NPN |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FK2-0155-000 |
| Деталь: | GEAR, 80T/16T |
| Парткод: | FU3-0285-000 |
| Деталь: | CABLE, PAPER PICK-UP DRIVE |
| Парткод: | FG3-2380-020 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-008 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-600 |
| Деталь: | PICK-UP MOTOR DRIVE ASSEMBLY |
| Парткод: | FG6-9025-000 |
| Деталь: | PANEL, EXTERNAL DELIVERY |
| Парткод: | FB6-3604-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-4873-000 |
| Деталь: | ROLLER, DELIVERY, 2 |
| Парткод: | FB6-3555-000 |
| Деталь: | ROLLER, INTERNAL DELIVERY |
| Парткод: | FC7-0607-000 |
| Деталь: | ROLLER, EXTERNAL DELIVERY |
| Парткод: | FB6-3602-000 |
| Деталь: | PIN, ROLLER HOLDING |
| Парткод: | FB6-3603-000 |
| Деталь: | GUIDE, EXTERNAL DELIV., LOWER |
| Парткод: | FB6-3606-000 |
| Деталь: | HOLDER, EXTERNAL DELIV. ROLLER |
| Парткод: | FF6-2117-000 |
| Деталь: | HOOK, DELIVERY, FRONT |
| Парткод: | FB6-3610-000 |
| Деталь: | HOOK, DELIVERY, REAR |
| Парткод: | FB6-3611-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | FB6-3613-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3614-000 |
| Деталь: | LINK, SOLENOID, 2 |
| Парткод: | FB6-3618-000 |
| Деталь: | DEFLECTOR, FACE-UP/DUPLEX |
| Парткод: | FF6-2118-000 |
| Деталь: | SHAFT, FU/DUPLEX DEFLECTOR |
| Парткод: | FB6-3620-000 |
| Деталь: | ROLLER, EXTERNAL DELIVERY |
| Парткод: | FB6-3621-000 |
| Деталь: | LINK, DEFLECTOR |
| Парткод: | FB6-3623-020 |
| Деталь: | LINK, FACE-UP DEFLECTOR, 2 |
| Парткод: | FB6-3626-000 |
| Деталь: | GUIDE, EXTERNAL DELIV., UPPER |
| Парткод: | FB6-3729-000 |
| Деталь: | PIN, ROLLER HOLDING |
| Парткод: | FB6-3843-000 |
| Деталь: | LABEL, FIXING DOOR OPEN/CLOSE |
| Парткод: | FB6-3846-000 |
| Деталь: | LABEL, FIXING DOOR OPEN/CLOSE |
| Парткод: | FB6-6216-000 |
| Деталь: | LABEL, FIXING LEVER OPEN/CLOSE |
| Парткод: | FB6-3847-000 |
| Деталь: | LABEL, FIXING JAM |
| Парткод: | FB6-3848-000 |
| Деталь: | GUIDE, FACE-UP FIXING |
| Парткод: | FF6-2075-030 |
| Деталь: | DAMPER, DUCT, 2 |
| Парткод: | FB6-3627-000 |
| Деталь: | DAMPER, NOISE INSULATION |
| Парткод: | FB6-3586-000 |
| Деталь: | GUIDE, EXTERNAL DELIV., LOWER |
| Парткод: | FF6-2116-000 |
| Деталь: | KNOB, DELIVERY |
| Парткод: | FB6-3612-000 |
| Деталь: | BLOCK, ROLLER |
| Парткод: | FS5-1595-000 |
| Деталь: | GEAR, 32T |
| Парткод: | FS7-0128-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2924-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2828-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2830-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0277-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2831-000 |
| Деталь: | GEAR, 13T |
| Парткод: | FU3-0316-000 |
| Деталь: | GEAR, 21T |
| Парткод: | FU3-0317-000 |
| Деталь: | ROLLER, PAPER SENSOR |
| Парткод: | FB6-7002-000 |
| Деталь: | ROLLER |
| Парткод: | RB9-0255-000 |
| Деталь: | BUSHING |
| Парткод: | RS5-1060-000 |
| Деталь: | BUSHING, CONDUCTIVE |
| Парткод: | RS5-1325-000 |
| Деталь: | DEFLECTOR, FACE-UP, DUPLEXING |
| Парткод: | FB6-3622-000 |
| Деталь: | ROLLER, FACE-UP DEFLECTOR |
| Парткод: | FB6-3892-000 |
| Деталь: | SHAFT, FACE-UP DEFLECTOR |
| Парткод: | FF6-2128-000 |
| Деталь: | COVER, PROTECTION |
| Парткод: | FB6-6222-000 |
| Деталь: | GUIDE, EXTERNAL DELIV., UPPER |
| Парткод: | FF6-2115-000 |
| Деталь: | SHEET, DUPLEXING REVERSE |
| Парткод: | FB6-3617-000 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-402 |
| Деталь: | SCREW,W/WASHER,M3X8 |
| Парткод: | XB2-8300-807 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-102 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-122 |
| Деталь: | SCREW,TP,M4X6 |
| Парткод: | XB6-7400-607 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-282 |
| Деталь: | EXTERNAL DELIVERY COVER ASSY |
| Парткод: | FG6-9059-110 |
| Деталь: | EXTERNAL DELIVERY COVER ASSY |
| Парткод: | FM1-0351-090 |
| Деталь: | RING, RETAINING |
| Парткод: | FC6-7022-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | FB6-6642-000 |
| Деталь: | BRUSH, GROUNDING |
| Парткод: | FB6-6643-000 |
| Деталь: | ROLLER, FIXING |
| Парткод: | FC7-0605-000 |
| Деталь: | LEVER, INLET |
| Парткод: | FB6-3879-000 |
| Деталь: | SHAFT, PRESSURE RELEASE |
| Парткод: | FB6-6557-020 |
| Деталь: | LEVER, PRESSURE RELEASE |
| Парткод: | FB6-3644-000 |
| Деталь: | GUIDE, FIXING DELIVERY, UPPER |
| Парткод: | FB6-3645-030 |
| Деталь: | RETAINER, DELIVERY COLLAR |
| Парткод: | FB6-3646-000 |
| Деталь: | COVER, FIXING, UPPER |
| Парткод: | FB6-3647-040 |
| Деталь: | SCREW,TP,M4X20 |
| Парткод: | XA9-1361-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0477-000 |
| Деталь: | MOUNT, DRAWER |
| Парткод: | FB6-3651-000 |
| Деталь: | BEARING, BALL, NTN |
| Парткод: | XG9-0754-000 |
| Деталь: | ROLLER, PRESSURE |
| Парткод: | FC7-0606-000 |
| Деталь: | PIN, JOINT, FRONT |
| Парткод: | FB6-3657-000 |
| Деталь: | SHAFT, INLET LEVER |
| Парткод: | FB6-3658-000 |
| Деталь: | GUIDE, FIXING INLET |
| Парткод: | FB6-3659-000 |
| Деталь: | RETAINER, UPPER HEATER |
| Парткод: | FB6-3660-000 |
| Деталь: | LEVER, DELIVERY, 1 |
| Парткод: | FB6-3662-010 |
| Деталь: | GUIDE, FIXING DELIVERY, LOWER |
| Парткод: | FB6-3663-010 |
| Деталь: | PLATE, CONDUCTIVE, 3 |
| Парткод: | FB6-3664-000 |
| Деталь: | COVER, FIXING, REAR |
| Парткод: | FB6-3665-000 |
| Деталь: | CLAW, SEPARATION |
| Парткод: | FB6-3666-000 |
| Деталь: | BUSHING |
| Парткод: | FB6-6519-000 |
| Деталь: | SHAFT, PRESSURE, UPPER |
| Парткод: | FB6-3668-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FA9-3941-000 |
| Деталь: | PIN, JOINT, REAR |
| Парткод: | FB6-3670-000 |
| Деталь: | SHAFT, LOWER GUIDE |
| Парткод: | FB6-3671-000 |
| Деталь: | LEVER, INTERNAL DELIVERY, 2 |
| Парткод: | FB6-3673-010 |
| Деталь: | BUSHING |
| Парткод: | FA3-0652-000 |
| Деталь: | SHAFT, PRESSURE, LOWER |
| Парткод: | FB6-3675-020 |
| Деталь: | PLATE, PRESSURE SLIDE |
| Парткод: | FB6-3676-000 |
| Деталь: | SPRING, GROUNDING |
| Парткод: | FB6-3677-000 |
| Деталь: | KNOB, GUIDE |
| Парткод: | FB6-3678-010 |
| Деталь: | ROLLER, FIXING DELIVERY |
| Парткод: | FB6-3710-000 |
| Деталь: | COLLAR, TRANSFER |
| Парткод: | FB6-3150-000 |
| Деталь: | FIXING DRAWER CABLE ASSEMBLY |
| Парткод: | FG6-9644-020 |
| Деталь: | FIXING DRAWER CABLE ASSEMBLY |
| Парткод: | FG6-9646-020 |
| Деталь: | FIXING DRAWER CABLE ASSEMBLY |
| Парткод: | FG6-9647-020 |
| Деталь: | ROLLER, PAPER SENSOR |
| Парткод: | FB6-7002-000 |
| Деталь: | QUARTZ HEATER |
| Парткод: | FH7-4739-000 |
| Деталь: | SPRING, GROUNDING |
| Парткод: | FB6-4909-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | UPPER FRAME ASSEMBLY |
| Парткод: | FG6-9645-070 |
| Деталь: | RIB, PAPER DELIVERY |
| Парткод: | FB6-3885-000 |
| Деталь: | SPACER |
| Парткод: | FS5-6947-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2814-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FC7-0611-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2816-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2817-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2852-000 |
| Деталь: | GEAR, 45T |
| Парткод: | FA9-3942-000 |
| Деталь: | PLATE, COVER FIXING, UPPER |
| Парткод: | FB6-3648-000 |
| Деталь: | CABLE CLIP |
| Парткод: | WT2-5639-000 |
| Деталь: | LEVER, PRESSURE RELEASE |
| Парткод: | FM1-0423-000 |
| Деталь: | PIN,DOWEL |
| Парткод: | FB6-6558-000 |
| Деталь: | SPRING,TORSION |
| Парткод: | FC7-0612-000 |
| Деталь: | PLATE, CONDUCTIVE, 1 |
| Парткод: | FB6-3649-030 |
| Деталь: | PLATE, CONDUCTIVE, 2 |
| Парткод: | FB6-3650-030 |
| Деталь: | RETAINER, THERMISTOR |
| Парткод: | FB6-3669-000 |
| Деталь: | THERMOSTAT |
| Парткод: | FH7-6345-000 |
| Деталь: | THERMISTOR UNIT |
| Парткод: | FH7-7586-020 |
| Деталь: | THERMISTOR UNIT |
| Парткод: | FH7-7587-000 |
| Деталь: | PLATE, FIXING |
| Парткод: | FB6-3652-030 |
| Деталь: | SCREW,W/WASHER,M3X8 |
| Парткод: | XB2-8300-807 |
| Деталь: | SCREW, W/WASHER, M3X12 |
| Парткод: | XB2-8301-207 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-322 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2300-142 |
| Деталь: | WASHER, SHIM MD4.1 |
| Парткод: | XD1-1104-138 |
| Деталь: | FIXING ASSEMBLY |
| Парткод: | FG6-9700-320 |
| Деталь: | FIXING ASSEMBLY |
| Парткод: | FG6-9069-310 |
| Деталь: | FIXING ASSEMBLY |
| Парткод: | FG6-9070-310 |
| Деталь: | SEAL, BLANKING |
| Парткод: | FC5-0166-000 |
| Деталь: | GUIDE, VERTICAL PATH RIB |
| Парткод: | FB6-3557-000 |
| Деталь: | PIN, LATCH |
| Парткод: | FB6-3866-000 |
| Деталь: | LEVER, COVER |
| Парткод: | FB6-3867-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RB1-6486-000 |
| Деталь: | FIN, DELIVERY |
| Парткод: | FB6-6645-000 |
| Деталь: | GUIDE, VERTICAL PATH DELIVERY |
| Парткод: | FB6-3547-000 |
| Деталь: | GUIDE, SPACER |
| Парткод: | FB6-4919-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3551-020 |
| Деталь: | FLAG, V. PATH DELIVERY SENSOR |
| Парткод: | FB6-3552-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3553-000 |
| Деталь: | ROLLER, DELIVERY, 1 |
| Парткод: | FB6-3554-000 |
| Деталь: | ROLLER, DELIVERY, 2 |
| Парткод: | FB6-3555-000 |
| Деталь: | ROLLER, VERTICAL PATH DELIVERY |
| Парткод: | FB6-3876-000 |
| Деталь: | GUIDE UNIT,V.PATH DELIV.LOWER |
| Парткод: | FM1-0420-000 |
| Деталь: | PANEL, VERTICAL PATH |
| Парткод: | FB6-3546-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1059-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2834-000 |
| Деталь: | GEAR, 17T |
| Парткод: | FU3-0325-000 |
| Деталь: | BUSHING, CONDUCTIVE |
| Парткод: | RS5-1101-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | RB1-6666-000 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | VERTICAL PATH PANEL ASSEMBLY |
| Парткод: | FG6-9052-000 |
| Деталь: | PANEL, CASSETTE, FRONT |
| Парткод: | FB6-3475-000 |
| Деталь: | PLATE, SIDE GUIDE, FRONT |
| Парткод: | FB6-3478-000 |
| Деталь: | PLATE, SIDE GUIDE, REAR |
| Парткод: | FB6-3479-000 |
| Деталь: | PLATE, END GUIDE |
| Парткод: | FB6-3480-000 |
| Деталь: | RACK, 1 |
| Парткод: | FB6-3481-000 |
| Деталь: | RACK, 2 |
| Парткод: | FB6-3482-000 |
| Деталь: | KNOB, SIDE GUIDE PLATE, 1 |
| Парткод: | FB6-3483-000 |
| Деталь: | KNOB, SIDE GUIDE PLATE, 2 |
| Парткод: | FB6-3484-000 |
| Деталь: | COVER, PAPER SIZE SELECT |
| Парткод: | FB6-3485-000 |
| Деталь: | PLATE, LIFTER |
| Парткод: | FB6-3486-000 |
| Деталь: | BUTTON, PUSH |
| Парткод: | FB6-3487-000 |
| Деталь: | ARM, LOCK |
| Парткод: | FB6-3488-000 |
| Деталь: | LINK, RELEASE |
| Парткод: | FB6-3489-000 |
| Деталь: | CLAW, SIDE PLATE GUIDE |
| Парткод: | FB6-3490-000 |
| Деталь: | PLATE, CASSETTE PAPER SIZE |
| Парткод: | FB6-3491-000 |
| Деталь: | COLLAR, CASSETTE SWING |
| Парткод: | FB6-3506-000 |
| Деталь: | PLATE, PAPER LIFTING |
| Парткод: | FF6-2064-030 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2804-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2805-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2806-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0293-000 |
| Деталь: | GEAR, 7T |
| Парткод: | FU3-0294-000 |
| Деталь: | LABEL, PAPER SET |
| Парткод: | FB6-3522-000 |
| Деталь: | LABEL, PAPER SET |
| Парткод: | FB6-6214-000 |
| Деталь: | LABEL, CASSETTE SIZE |
| Парткод: | FB6-3523-000 |
| Деталь: | LABEL, PAPER SIZE SELECT |
| Парткод: | FB6-3524-000 |
| Деталь: | LABEL, PAPER SIZE SELECT |
| Парткод: | FB6-6215-000 |
| Деталь: | LABEL, CASSETTE SIZE, PANEL |
| Парткод: | FC5-0563-020 |
| Деталь: | LABEL, PAPER HEIGHT |
| Парткод: | FS6-8116-000 |
| Деталь: | CASSETTE UNDER SHEET ASSEMBLY |
| Парткод: | FG6-9041-000 |
| Деталь: | SHEET, SEPARATION |
| Парткод: | FB6-3499-000 |
| Деталь: | SCREW,W/WASHER,M3X6 |
| Парткод: | XB2-8300-607 |
| Деталь: | SCREW,TP,M3X8 |
| Парткод: | XB6-7300-807 |
| Деталь: | CASSETTE |
| Парткод: | FG6-9044-010 |
| Деталь: | CASSETTE |
| Парткод: | FM1-0350-010 |
| Деталь: | MOUNT, ANTENNA |
| Парткод: | FB6-3163-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1581-000 |
| Деталь: | CONNECTING PCB ASSEMBLY |
| Парткод: | RG5-5469-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2825-000 |
| Деталь: | GEAR, 58T |
| Парткод: | FU3-0302-000 |
| Деталь: | GEAR, 30T |
| Парткод: | FU3-0303-000 |
| Деталь: | GEAR, 28T/53T |
| Парткод: | FU3-0304-000 |
| Деталь: | GEAR, 19T/38T |
| Парткод: | FU3-0305-000 |
| Деталь: | GEAR, 19T/49T |
| Парткод: | FU3-0306-000 |
| Деталь: | COUPLING |
| Парткод: | RB2-7043-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CABLE, TONER CARTRIDGE |
| Парткод: | FG3-2344-020 |
| Деталь: | CABLE, CONNECTING |
| Парткод: | FG3-2372-020 |
| Деталь: | MOTOR, DC BRUSH |
| Парткод: | FG6-9004-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | SCREW BH 2.6X4 |
| Парткод: | XB1-2260-407 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-322 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-142 |
| Деталь: | TONER CARTRIDGE DRIVE ASSEMBLY |
| Парткод: | FG6-8999-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | FC6-2915-000 |
| Деталь: | ROLLER, PAPER DELIVERY |
| Парткод: | FC6-4012-000 |
| Деталь: | RING |
| Парткод: | FC6-5061-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3532-000 |
| Деталь: | ROLLER, REVERSE |
| Парткод: | FB6-5781-020 |
| Деталь: | FLAG, DELIVERY SENSOR |
| Парткод: | FB6-3534-000 |
| Деталь: | COLLAR |
| Парткод: | FB6-3877-000 |
| Деталь: | SENSOR ARM & SPRING PARTS SET |
| Парткод: | FY7-0375-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3545-020 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3564-000 |
| Деталь: | PLATE, PAPER FULL SENSOR |
| Парткод: | FF6-2131-000 |
| Деталь: | GUIDE, PAPER FEED |
| Парткод: | FF6-2344-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1975-020 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | BUSHING |
| Парткод: | FS2-1544-000 |
| Деталь: | GEAR, 22T |
| Парткод: | FS5-0353-000 |
| Деталь: | PULLEY, 32T |
| Парткод: | FS5-3989-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0319-000 |
| Деталь: | GEAR, 17T/51T |
| Парткод: | FU3-0322-000 |
| Деталь: | GEAR, 28T |
| Парткод: | FU3-0323-000 |
| Деталь: | GEAR, 31T/17T |
| Парткод: | FU3-0324-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | RB1-6666-000 |
| Деталь: | BUSHING |
| Парткод: | RS5-1324-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2859-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0736-000 |
| Деталь: | CABLE, DELIVERY PATH |
| Парткод: | FG3-2311-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XA9-0724-000 |
| Деталь: | FLAG, PAPER FULL SENSOR |
| Парткод: | FB6-3869-000 |
| Деталь: | ROLLER, FACE-DOWN DELIVERY |
| Парткод: | FB6-3874-000 |
| Деталь: | GUIDE, INLET, UPPER |
| Парткод: | FB6-5786-000 |
| Деталь: | GUIDE, INLET, LOWER |
| Парткод: | FB6-5787-000 |
| Деталь: | BUSHING |
| Парткод: | FB6-5790-000 |
| Деталь: | PLATE, STATIC ELIMINATOR |
| Парткод: | FB6-5791-000 |
| Деталь: | DUCT, VERTICAL PATH FAN |
| Парткод: | FB6-5792-000 |
| Деталь: | SHEET, CABLE RETAINER |
| Парткод: | FB6-5795-000 |
| Деталь: | ROLLER, SLAVE |
| Парткод: | FL2-5277-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1067-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2866-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0513-000 |
| Деталь: | CABLE, VERTICAL PATH FAN |
| Парткод: | FG3-3010-020 |
| Деталь: | FAN |
| Парткод: | FH6-1984-020 |
| Деталь: | BUSHING |
| Парткод: | XZ9-0556-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-242 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SHIM |
| Парткод: | XD1-1104-635 |
| Деталь: | SPACER |
| Парткод: | XZ1-1300-605 |
| Деталь: | SCREW,TP,M3X8 |
| Парткод: | XB6-7300-805 |
| Деталь: | DELIVERY VERTICAL PATH ASSY |
| Парткод: | FG6-9654-030 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-2992-000 |
| Деталь: | HANDLE, FRONT |
| Парткод: | FB6-3442-000 |
| Деталь: | FOOT, RUBBER |
| Парткод: | XH9-0059-000 |
| Деталь: | PANEL, HEATER PCB |
| Парткод: | FB6-5060-000 |
| Деталь: | BUSHING |
| Парткод: | XG9-0476-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0177-000 |
| Деталь: | SHAFT, ROLLER |
| Парткод: | FB6-3963-000 |
| Деталь: | SUPPORT, ROLLER, LOWER |
| Парткод: | FB6-3962-000 |
| Деталь: | SUPPORT, ROLLER, UPPER |
| Парткод: | FB6-3961-000 |
| Деталь: | BLOCK, SWING |
| Парткод: | FB6-3507-000 |
| Деталь: | CABLE, CASSETTE SIZE SENSOR |
| Парткод: | FG3-2348-000 |
| Деталь: | SWITCH, CASSETTE SIZE |
| Парткод: | WC2-5680-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2808-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2807-000 |
| Деталь: | HOLDER, SWITCH, 3 |
| Парткод: | FB6-3494-000 |
| Деталь: | HOLDER, SWITCH, 2 |
| Парткод: | FB6-3493-000 |
| Деталь: | HOLDER, SWITCH, 1 |
| Парткод: | FB6-3492-000 |
| Деталь: | CABLE, LEFT LOWER CROSSMEMBER |
| Парткод: | FG3-2347-000 |
| Деталь: | PLATE, SIDE REGIST. ADJUSTMENT |
| Парткод: | FF6-2063-000 |
| Деталь: | CAP, DUST-PROOF |
| Парткод: | FB5-8385-000 |
| Деталь: | CAM, LOCK |
| Парткод: | FB6-2986-000 |
| Деталь: | SHAFT, SWING |
| Парткод: | FB6-2985-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2865-000 |
| Деталь: | CONNECTOR, SHORT |
| Парткод: | FG9-3986-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-003 |
| Деталь: | RAIL, LEFT |
| Парткод: | FB6-3497-000 |
| Деталь: | RAIL, RIGHT |
| Парткод: | FB6-3495-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-005 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-010 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-802 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SHIM |
| Парткод: | XD1-1106-222 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-600 |
| Деталь: | SCREW,W/WASHER,M4X16 |
| Парткод: | XB2-8401-607 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X4 |
| Парткод: | XB1-2400-407 |
| Деталь: | INTERNAL COMPONENTS 1 |
| Парткод: | NPN |
| Деталь: | LABEL, LASER WARNING |
| Парткод: | FS7-8335-000 |
| Деталь: | LABEL, LASER WARNING |
| Парткод: | RU5-8126-000 |
| Деталь: | LASER UNIT |
| Парткод: | FG6-8962-000 |
| Деталь: | LASER UNIT |
| Парткод: | FM1-0357-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | FC6-2915-000 |
| Деталь: | ROLLER, PAPER DELIVERY |
| Парткод: | FC6-4012-000 |
| Деталь: | RING |
| Парткод: | FC6-5061-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3532-000 |
| Деталь: | ROLLER, REVERSE |
| Парткод: | FB6-5781-020 |
| Деталь: | FLAG, DELIVERY SENSOR |
| Парткод: | FB6-3534-000 |
| Деталь: | COLLAR |
| Парткод: | FB6-3877-000 |
| Деталь: | SENSOR ARM & SPRING PARTS SET |
| Парткод: | FY7-0375-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3545-020 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3564-000 |
| Деталь: | PLATE, PAPER FULL SENSOR |
| Парткод: | FF6-2131-000 |
| Деталь: | GUIDE, PAPER FEED |
| Парткод: | FF6-2344-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1975-020 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | BUSHING |
| Парткод: | FS2-1544-000 |
| Деталь: | GEAR, 22T |
| Парткод: | FS5-0353-000 |
| Деталь: | PULLEY, 32T |
| Парткод: | FS5-3989-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0319-000 |
| Деталь: | GEAR, 17T/51T |
| Парткод: | FU3-0322-000 |
| Деталь: | GEAR, 28T |
| Парткод: | FU3-0323-000 |
| Деталь: | GEAR, 31T/17T |
| Парткод: | FU3-0324-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | RB1-6666-000 |
| Деталь: | BUSHING |
| Парткод: | RS5-1324-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2859-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0736-000 |
| Деталь: | CABLE, DELIVERY PATH |
| Парткод: | FG3-2311-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XA9-0724-000 |
| Деталь: | FLAG, PAPER FULL SENSOR |
| Парткод: | FB6-3869-000 |
| Деталь: | ROLLER, FACE-DOWN DELIVERY |
| Парткод: | FB6-3874-000 |
| Деталь: | GUIDE, INLET, UPPER |
| Парткод: | FB6-5786-000 |
| Деталь: | GUIDE, INLET, LOWER |
| Парткод: | FB6-5787-000 |
| Деталь: | BUSHING |
| Парткод: | FB6-5790-000 |
| Деталь: | PLATE, STATIC ELIMINATOR |
| Парткод: | FB6-5791-000 |
| Деталь: | DUCT, VERTICAL PATH FAN |
| Парткод: | FB6-5792-000 |
| Деталь: | SHEET, CABLE RETAINER |
| Парткод: | FB6-5795-000 |
| Деталь: | ROLLER, SLAVE |
| Парткод: | FL2-5277-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1067-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2866-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0513-000 |
| Деталь: | CABLE, VERTICAL PATH FAN |
| Парткод: | FG3-3010-020 |
| Деталь: | FAN |
| Парткод: | FH6-1984-020 |
| Деталь: | BUSHING |
| Парткод: | XZ9-0556-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-242 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SHIM |
| Парткод: | XD1-1104-635 |
| Деталь: | SPACER |
| Парткод: | XZ1-1300-605 |
| Деталь: | SCREW,TP,M3X8 |
| Парткод: | XB6-7300-805 |
| Деталь: | DELIVERY VERTICAL PATH ASSY |
| Парткод: | FG6-9654-030 |
| Деталь: | KEY TOP, START |
| Парткод: | FB5-2172-000 |
| Деталь: | KEY TOP, RESET |
| Парткод: | FB5-3698-010 |
| Деталь: | KEY TOP, POWER SUPPLY |
| Парткод: | FB5-3699-000 |
| Деталь: | KEY TOP, ENERGY SAVE |
| Парткод: | FB5-3728-000 |
| Деталь: | WINDOW, LAMP |
| Парткод: | FB6-3944-000 |
| Деталь: | WINDOW, LAMP |
| Парткод: | FB6-3945-000 |
| Деталь: | KEY TOP, STOP |
| Парткод: | FB6-3946-000 |
| Деталь: | SHEET, ELECTROSTATIC |
| Парткод: | FB6-3947-000 |
| Деталь: | KEY TOP, COUNTER |
| Парткод: | FB6-3951-000 |
| Деталь: | KEY TOP, NUMBERS |
| Парткод: | FB6-3949-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FH2-7037-000 |
| Деталь: | ANALOG TOUCH PANEL UNIT |
| Парткод: | FK2-0329-000 |
| Деталь: | CONTROL PANEL KEY PCB ASSEMBLY |
| Парткод: | FG3-2357-000 |
| Деталь: | CONTROL PANEL CPU PCB ASSEMBLY |
| Парткод: | FG6-8938-000 |
| Деталь: | C. PANEL INVERTER PCB ASSEMBLY |
| Парткод: | FG6-8939-000 |
| Деталь: | LCD CONTROL PANEL UNIT |
| Парткод: | FL2-3730-010 |
| Деталь: | CABLE, C. PANEL INVERTER |
| Парткод: | FG6-9164-000 |
| Деталь: | CABLE, C. PANEL KEY, A |
| Парткод: | FG6-9165-000 |
| Деталь: | CABLE, C. PANEL KEY, B |
| Парткод: | FG6-9166-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3953-000 |
| Деталь: | LABEL, PAPER SET CAUTION |
| Парткод: | FB6-6213-000 |
| Деталь: | SCREW,W/WASHER,M3X6 |
| Парткод: | XB2-8300-607 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SCREW,P,M3X10 |
| Парткод: | XB4-5301-007 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-8941-030 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-8933-030 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-8934-030 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-8935-030 |
| Деталь: | DUCT, CORD |
| Парткод: | FB6-3314-000 |
| Деталь: | PANEL, BLANKING |
| Парткод: | FB6-3472-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2811-000 |
| Деталь: | SCREW,RS,M4X10 |
| Парткод: | XA9-0721-010 |
| Деталь: | BUSHING |
| Парткод: | FA1-0056-000 |
| Деталь: | RING, RETAINING |
| Парткод: | FC6-5046-000 |
| Деталь: | BALL BEARING, MF128ZZ1MC3D4M |
| Парткод: | XG9-0211-000 |
| Деталь: | ROLLER, PAPER PICK-UP |
| Парткод: | FB1-8581-000 |
| Деталь: | ROLLER, SEPARATION |
| Парткод: | FB5-0873-000 |
| Деталь: | ROLLER, REGISTRATION, LOWER |
| Парткод: | FB6-4849-010 |
| Деталь: | SHEET, REGISTRATION, LOWER |
| Парткод: | FB6-3302-000 |
| Деталь: | FLAG, REGISTRATION SENSOR |
| Парткод: | FB6-3303-000 |
| Деталь: | ROLLER, REGISTRATION, FRONT |
| Парткод: | FB6-6524-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3305-000 |
| Деталь: | GUIDE, INLET |
| Парткод: | FC7-0047-000 |
| Деталь: | GUIDE, REGISTRATION, UPPER |
| Парткод: | FB6-3308-000 |
| Деталь: | ROLLER, REGISTRATION, UPPER |
| Парткод: | FB6-3309-000 |
| Деталь: | LEVER, PRESSURE, FRONT |
| Парткод: | FB6-3310-000 |
| Деталь: | LEVER, PRESSURE, REAR |
| Парткод: | FB6-3311-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-3313-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3315-000 |
| Деталь: | GUIDE, DUPLEXING, EXTERNAL |
| Парткод: | FC7-0048-000 |
| Деталь: | ROLLER, RE-PICK UP |
| Парткод: | FB6-6525-000 |
| Деталь: | GUIDE, DUPLEXING, INTERNAL |
| Парткод: | FC7-3374-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-4873-000 |
| Деталь: | SHEET, REGISTRATION, LOWER |
| Парткод: | FB6-3317-000 |
| Деталь: | LIMITER, TORQUE |
| Парткод: | FB6-3410-000 |
| Деталь: | SHAFT, ROLLER |
| Парткод: | FF6-2136-000 |
| Деталь: | CLUTCH |
| Парткод: | FB6-3463-000 |
| Деталь: | HOLDER, SEPARATION ROLLER |
| Парткод: | FB6-3464-000 |
| Деталь: | ARM, LIFTING PLATE PRESSURE |
| Парткод: | FB6-3465-000 |
| Деталь: | CAM, JOINT |
| Парткод: | FB6-3466-000 |
| Деталь: | GEAR, 27T |
| Парткод: | FB6-3467-000 |
| Деталь: | GUIDE, MAIN |
| Парткод: | FF6-2134-000 |
| Деталь: | GUIDE, SUB |
| Парткод: | FB6-3470-000 |
| Деталь: | FLAG, PAPER SENSOR |
| Парткод: | FB6-3471-000 |
| Деталь: | SHAFT, SEPARATION ROLLER |
| Парткод: | FL2-8140-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1973-020 |
| Деталь: | SOLENOID |
| Парткод: | FK2-0115-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS2-2783-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1209-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1512-000 |
| Деталь: | BLOCK, ROLLER |
| Парткод: | FS5-1595-000 |
| Деталь: | RING, RETAINING |
| Парткод: | FC6-9867-000 |
| Деталь: | COLLAR, REGISTRATION MULTI |
| Парткод: | FS5-6945-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1055-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1057-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1058-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2787-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2860-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2925-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2926-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2812-010 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2927-000 |
| Деталь: | GEAR, 63T |
| Парткод: | FU3-0270-000 |
| Деталь: | GEAR, 32T |
| Парткод: | FU3-0271-000 |
| Деталь: | GEAR, 23T/75T |
| Парткод: | FU3-0272-000 |
| Деталь: | GEAR, 28T |
| Парткод: | FU3-0273-000 |
| Деталь: | GEAR, 43T/31T |
| Парткод: | FU3-0274-000 |
| Деталь: | GEAR, 39T/26T |
| Парткод: | FU3-0275-000 |
| Деталь: | GEAR, 25T |
| Парткод: | FU3-0276-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0277-000 |
| Деталь: | GEAR, 23T |
| Парткод: | FU3-0278-000 |
| Деталь: | GEAR, 44T |
| Парткод: | FU3-0295-000 |
| Деталь: | GEAR, 24T |
| Парткод: | FU3-0296-000 |
| Деталь: | GEAR, 36T |
| Парткод: | FU3-0297-000 |
| Деталь: | GEAR, 27T/18T |
| Парткод: | FU3-0298-000 |
| Деталь: | ROLLER, ARM |
| Парткод: | RB1-2152-000 |
| Деталь: | PRISM |
| Парткод: | RB2-5850-000 |
| Деталь: | OHT SENSOR UNIT |
| Парткод: | RH7-7129-020 |
| Деталь: | BUSHING |
| Парткод: | RS5-1567-000 |
| Деталь: | CABLE, REGIST. MULTI, 1 |
| Парткод: | FG3-2303-000 |
| Деталь: | CABLE, REGIST. MULTI, 2 |
| Парткод: | FG3-2304-020 |
| Деталь: | PANEL, REGIST. MULTI, RIGHT |
| Парткод: | FB6-3473-000 |
| Деталь: | BUTTON, REGIST. MULTI PUSH |
| Парткод: | FB6-3474-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2813-000 |
| Деталь: | PLATE, SHEET SUPPORT |
| Парткод: | FB6-4938-000 |
| Деталь: | LABEL, SAFETY OPERATION |
| Парткод: | FB6-3858-000 |
| Деталь: | LABEL, SAFETY OPERATION |
| Парткод: | FB6-6217-000 |
| Деталь: | LABEL, JAM PAPER |
| Парткод: | FB6-3859-000 |
| Деталь: | LABEL, JAM PAPER |
| Парткод: | FB6-6218-000 |
| Деталь: | LABEL, MULTI HANDLE |
| Парткод: | FB6-3863-000 |
| Деталь: | LABEL, GUIDE HANDLE |
| Парткод: | FB6-3864-000 |
| Деталь: | HOLDER, CONNECTOR |
| Парткод: | FB6-4863-000 |
| Деталь: | SCREW,STEPPED,M3 |
| Парткод: | FS5-9761-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2863-000 |
| Деталь: | SHIM |
| Парткод: | FB2-6285-020 |
| Деталь: | SHEET, PUSH-ON |
| Парткод: | FB6-3878-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,P,M3X10 |
| Парткод: | XB4-5301-007 |
| Деталь: | SCREW,P,M4X10 |
| Парткод: | XB4-5401-007 |
| Деталь: | SCREW,W/WASHER,M4X8 |
| Парткод: | XB2-8400-807 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-102 |
| Деталь: | SCREW,W/WASHER,M4X10 |
| Парткод: | XB2-8401-007 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-142 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-282 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7440-006 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | MULTI FEED ASSEMBLY |
| Парткод: | FG6-9080-000 |
| Деталь: | MULTI FEED ASSEMBLY |
| Парткод: | FG6-9081-000 |
| Деталь: | MULTI FEED ASSEMBLY |
| Парткод: | FM1-0354-000 |
| Деталь: | MOUNT, PANEL |
| Парткод: | FB6-3073-000 |
| Деталь: | FILTER, DUST |
| Парткод: | FB6-3076-000 |
| Деталь: | MOUNT, FILTER |
| Парткод: | FB6-3104-000 |
| Деталь: | UFR BOARD PCB ASSEMBLY |
| Парткод: | FG3-3809-000 |
| Деталь: | FLAT CABLE, HDD, 2 |
| Парткод: | FH2-7043-000 |
| Деталь: | FAN |
| Парткод: | FH5-1111-000 |
| Деталь: | SCREW |
| Парткод: | XA9-0896-000 |
| Деталь: | FLAT CABLE, DDI-P, 1 |
| Парткод: | FG3-2362-000 |
| Деталь: | FLAT CABLE, DDI-P, 2 |
| Парткод: | FG3-2363-000 |
| Деталь: | CABLE, CONTROLLER-POWER SUPPLY |
| Парткод: | FG3-2644-000 |
| Деталь: | CABLE, CONTROLLER-I/O |
| Парткод: | FG3-2645-010 |
| Деталь: | CABLE, CONTROLLER-FAN |
| Парткод: | FG3-2646-030 |
| Деталь: | CABLE, COIN VENDER |
| Парткод: | FG3-3287-020 |
| Деталь: | DIMM, SMS-51228QN2P-H, SD-RAM |
| Парткод: | WA7-4107-000 |
| Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
| Парткод: | FG3-2854-010 |
| Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
| Парткод: | FG3-3668-000 |
| Деталь: | SUB CONTROLLER BOARD ASSEMBLY |
| Парткод: | FG3-2855-000 |
| Деталь: | SRAM BOARD PCB ASSEMBLY |
| Парткод: | FG3-3669-000 |
| Деталь: | DISTRIBUTION BOARD ASSEMBLY |
| Парткод: | FG6-9666-000 |
| Деталь: | DISTRIBUTION BOARD ASSEMBLY |
| Парткод: | FG6-9676-000 |
| Деталь: | DDI-S BOARD PCB ASSEMBLY |
| Парткод: | FG3-3136-000 |
| Деталь: | NETWORK BOARD PCB ASSEMBLY |
| Парткод: | FM2-0537-000 |
| Деталь: | NETWORK BOARD PCB ASSEMBLY |
| Парткод: | FM2-3892-000 |
| Деталь: | HDD,MK1665GSX |
| Парткод: | FK2-9316-000 |
| Деталь: | DIMM, SMS-25628QN2P-H, SD-RAM |
| Парткод: | WA7-4106-000 |
| Деталь: | SUPPORT, HARD DISK |
| Парткод: | FB6-3071-000 |
| Деталь: | MOUNT, HARD DISK |
| Парткод: | FB6-3072-000 |
| Деталь: | SHIELD PLATE |
| Парткод: | FB6-6382-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | PCB ASSY, PATA-SATA |
| Парткод: | FM2-5661-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-010 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-008 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-012 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M2.6X8 |
| Парткод: | XB1-2260-807 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X30 |
| Парткод: | XB1-2403-009 |
| Деталь: | SCREW,TP,M3X6 |
| Парткод: | XB6-7300-607 |
| Деталь: | SCREW,TP,M3X16 |
| Парткод: | XB6-7301-607 |
| Деталь: | SHIM |
| Парткод: | XD1-1105-235 |
| Деталь: | IC, L7A1857, STANDARD CELL |
| Парткод: | FH4-6250-000 |
| Деталь: | IC, L7A1863, STANDARD CELL |
| Парткод: | FH4-6271-000 |
| Деталь: | CONTROLLER ASSEMBLY |
| Парткод: | NPN |
| Деталь: | BLOCK, FIXING/FEEDER STOP |
| Парткод: | FB6-3679-000 |
| Деталь: | ARM, CLICK, REAR |
| Парткод: | FB6-3933-000 |
| Деталь: | PLATE, STOP |
| Парткод: | FB6-3232-000 |
| Деталь: | ARM, CLICK, FRONT |
| Парткод: | FB6-3932-000 |
| Деталь: | PLATE, REGISTRATION STOP |
| Парткод: | FB6-3316-000 |
| Деталь: | LABEL, SIZE, MANUAL FEED |
| Парткод: | FB6-3528-000 |
| Деталь: | LABEL, SIZE, MANUAL FEED |
| Парткод: | FB6-3529-000 |
| Деталь: | LABEL, SIZE, MANUAL FEED |
| Парткод: | FB6-3526-000 |
| Деталь: | LABEL, SIZE, MANUAL FEED |
| Парткод: | FB6-4867-000 |
| Деталь: | LABEL, SIZE, MANUAL FEED |
| Парткод: | FB6-3527-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2847-000 |
| Деталь: | BUSHING, SLIDE SHAFT |
| Парткод: | FB6-3689-000 |
| Деталь: | BRACKET, FIXING |
| Парткод: | FB6-3693-000 |
| Деталь: | PANEL, DELIVERY, INTERNAL |
| Парткод: | FF6-2141-000 |
| Деталь: | STOPPER, OPEN/CLOSE |
| Парткод: | RB1-6484-000 |
| Деталь: | CABLE, DUPLEXING CONNECT |
| Парткод: | FG3-2299-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6318-009 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-012 |
| Деталь: | LABEL, POSTCARD SET |
| Парткод: | FB6-4868-000 |
| Деталь: | GUIDE, SIZE FIXING |
| Парткод: | FB6-4869-000 |
| Деталь: | CLIP |
| Парткод: | FB6-3887-000 |
| Деталь: | BRACKET |
| Парткод: | FB6-3409-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,P,M3X10 |
| Парткод: | XA9-1401-000 |
| Деталь: | INTERNAL COMPONENTS 5 |
| Парткод: | NPN |
| Деталь: | BELT, TRANSFER |
| Парткод: | FB6-2930-000 |
| Деталь: | ROLLER, TENSION |
| Парткод: | FB6-6380-000 |
| Деталь: | ROLLER, TRANSFER, 2 |
| Парткод: | FB6-2934-020 |
| Деталь: | BUSHING |
| Парткод: | FB6-2936-000 |
| Деталь: | COLLAR, LIMIT |
| Парткод: | FB6-2938-000 |
| Деталь: | PLATE, CONTACT |
| Парткод: | FB6-2939-000 |
| Деталь: | COVER, BELT |
| Парткод: | FB6-2940-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-2941-000 |
| Деталь: | HANDLE, FRONT |
| Парткод: | FB6-2942-000 |
| Деталь: | BUSHING |
| Парткод: | FB6-2944-010 |
| Деталь: | BUSHING |
| Парткод: | FB6-2945-010 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-2947-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB6-2948-000 |
| Деталь: | COVER, GEAR |
| Парткод: | FB6-2951-000 |
| Деталь: | ROLLER |
| Парткод: | FB6-2957-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-2958-000 |
| Деталь: | SCRAPER |
| Парткод: | FB6-2974-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1062-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2781-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2782-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2783-000 |
| Деталь: | GEAR, 42T |
| Парткод: | FU3-0266-040 |
| Деталь: | GEAR, 18T |
| Парткод: | FU3-0267-000 |
| Деталь: | GEAR, 40T |
| Парткод: | FU3-0268-000 |
| Деталь: | ROLLER, TRANSFER |
| Парткод: | FB6-6545-030 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0245-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0415-000 |
| Деталь: | CABLE, VARISTOR |
| Парткод: | FG3-2365-020 |
| Деталь: | HOLDER, CONTACT |
| Парткод: | FB6-2953-000 |
| Деталь: | CONTACT |
| Парткод: | FB6-2954-000 |
| Деталь: | PLATE, SUPPORT SPRING |
| Парткод: | FB6-2955-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2784-000 |
| Деталь: | CABLE, HV, YELLOW |
| Парткод: | FG3-2320-000 |
| Деталь: | CABLE, HV, MAGENTA |
| Парткод: | FG3-2321-000 |
| Деталь: | CABLE, HV, CYAN |
| Парткод: | FG3-2367-000 |
| Деталь: | CABLE, HV, BLACK |
| Парткод: | FG3-2368-000 |
| Деталь: | ROLLER, DRIVE |
| Парткод: | FB6-2931-020 |
| Деталь: | COVER SHEET 1 |
| Парткод: | FF6-2388-000 |
| Деталь: | COVER SHEET 2 |
| Парткод: | FF6-2389-000 |
| Деталь: | COVER SHEET 3 |
| Парткод: | FF6-2390-000 |
| Деталь: | COVER SHEET 4 |
| Парткод: | FF6-2391-000 |
| Деталь: | COVER SHEET 5 |
| Парткод: | FF6-2392-000 |
| Деталь: | COVER SHEET 6 |
| Парткод: | FF6-2396-000 |
| Деталь: | SHEET, HOLE CLOSE |
| Парткод: | FB6-7072-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SCREW,W/WASHER,M3X6 |
| Парткод: | XB2-8300-607 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | SHIM |
| Парткод: | XD1-1106-212 |
| Деталь: | SHIM |
| Парткод: | XD1-1108-225 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-202 |
| Деталь: | SHIM |
| Парткод: | XD1-1108-212 |
| Деталь: | INTER. TRANSFER BELT ASSEMBLY |
| Парткод: | FG6-8942-130 |
| Деталь: | DUCT, FIXING EXHAUST FAN |
| Парткод: | FB6-3167-000 |
| Деталь: | FAN |
| Парткод: | FH6-1980-020 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | SCREW,P,M4X35 |
| Парткод: | XB4-5403-507 |
| Деталь: | FIXING EXHAUST FAN ASSEMBLY |
| Парткод: | FG6-8968-000 |
| Деталь: | DUCT, JOINT |
| Парткод: | FB6-3797-000 |
| Деталь: | FAN |
| Парткод: | FH6-1979-030 |
| Деталь: | SCREW, P M4X30 |
| Парткод: | XB4-5403-007 |
| Деталь: | MACHINE EXHAUST FAN ASSEMBLY |
| Парткод: | FG6-9008-000 |
| Деталь: | COVER, REGISTRATION SENSOR |
| Парткод: | FB6-3273-000 |
| Деталь: | CAM, RELEASE, 1 |
| Парткод: | FB6-3291-000 |
| Деталь: | CAM, RELEASE, 2 |
| Парткод: | FB6-3292-000 |
| Деталь: | LEVER, RELEASE |
| Парткод: | FB6-3293-000 |
| Деталь: | HOLDER, CLEANING |
| Парткод: | FF6-2046-000 |
| Деталь: | SALT SENSOR UNIT |
| Парткод: | FH7-7601-030 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2850-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2851-000 |
| Деталь: | REGIST. SENSOR PCB ASSEMBLY |
| Парткод: | FG3-2315-000 |
| Деталь: | CABLE, REGIST. PAPER DETECT |
| Парткод: | FG3-2318-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-003 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | SCREW,TP,M3X6 |
| Парткод: | XB6-7300-607 |
| Деталь: | SHIM |
| Парткод: | XD1-1104-135 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-322 |
| Деталь: | PATTERN READER ASSEMBLY |
| Парткод: | FG6-8960-000 |
| Деталь: | BLOCK, SHAFT PRESSURE |
| Парткод: | FB4-3064-000 |
| Деталь: | HOLDER, DOOR SWITCH, FRONT |
| Парткод: | FB4-3066-000 |
| Деталь: | HOLDER, DOOR SWITCH SHAFT |
| Парткод: | FB6-3216-000 |
| Деталь: | BLOCK, SWITCH PUSH |
| Парткод: | FB6-3218-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | SCREW,STEPPED,M3X2.2 |
| Парткод: | FS1-9010-020 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS6-2785-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2854-000 |
| Деталь: | DOUBLE SWITCH PCB ASSEMBLY |
| Парткод: | FM2-8314-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | DOOR SWITCH ASSEMBLY |
| Парткод: | FG6-9013-00U |
| Деталь: | TRAY, MULTI FEEDER, UPPER |
| Парткод: | FB6-3450-000 |
| Деталь: | TRAY, MULTI FEEDER, LOWER |
| Парткод: | FB6-3451-000 |
| Деталь: | TRAY, SECOND |
| Парткод: | FB6-3452-000 |
| Деталь: | RACK, SIDE PLATE, REAR |
| Парткод: | FB6-3454-000 |
| Деталь: | RACK, SIDE PLATE, FRONT |
| Парткод: | FB6-3455-000 |
| Деталь: | GEAR, 46T/20T |
| Парткод: | FB6-3456-000 |
| Деталь: | RACK |
| Парткод: | FB6-3457-000 |
| Деталь: | BLOCK, SIDE REGIST. ADJUSTING |
| Парткод: | FB6-3459-000 |
| Деталь: | CABLE, MULTI TRAY |
| Парткод: | FG3-2301-000 |
| Деталь: | ROLLER, PAPER DETECT |
| Парткод: | FB6-3508-000 |
| Деталь: | SHEET, SEPARATION |
| Парткод: | FB6-4937-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | SLIDE VOLUME SENSOR UNIT |
| Парткод: | FH7-7600-010 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | SHIM |
| Парткод: | XD1-1106-235 |
| Деталь: | MULTI FEED TRAY ASSEMBLY |
| Парткод: | FG6-9042-000 |
| Деталь: | FAN |
| Парткод: | FH6-1982-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | CABLE, DELIVERY COOLING FAN |
| Парткод: | FG3-3973-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X40 |
| Парткод: | XB1-2404-007 |
| Деталь: | DELIVERY COOLING FAN ASSEMBLY |
| Парткод: | FG6-9065-000 |
| Деталь: | CABLE, MACHINE CASSETTE HEATER |
| Парткод: | FG3-2381-000 |
| Деталь: | CABLE, MACHINE CASSETTE HEATER |
| Парткод: | FG3-2393-000 |
| Деталь: | CABLE, CASSETTE HEATER RELAY |
| Парткод: | FG3-2395-020 |
| Деталь: | SWITCH, ROCKER |
| Парткод: | WC1-5129-000 |
| Деталь: | CABLE, CASSETTE HEATER SWITCH |
| Парткод: | FG3-2340-000 |
| Деталь: | CABLE, CASSETTE HEATER SWITCH |
| Парткод: | FG3-2341-000 |
| Деталь: | CABLE, CASSETTE HEATER CONTROL |
| Парткод: | FG3-2342-000 |
| Деталь: | HEATER, CASSETTE |
| Парткод: | FH7-4740-000 |
| Деталь: | HEATER, CASSETTE |
| Парткод: | FH7-4742-000 |
| Деталь: | CASSETTE HEATER PCB ASSEMBLY |
| Парткод: | FG6-9749-000 |
| Деталь: | CASSETTE HEATER PCB ASSY |
| Парткод: | FG6-9156-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | CASSETTE HEATER ASSEMBLY |
| Парткод: | NPN |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-4873-000 |
| Деталь: | SHAFT, DUPLEXING IDLER |
| Парткод: | FB6-3572-000 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 1 |
| Парткод: | FB6-3888-020 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 2 |
| Парткод: | FB6-6523-000 |
| Деталь: | SPACER |
| Парткод: | FB6-3576-000 |
| Деталь: | HOLDER, DUPLEXING SENSOR |
| Парткод: | FB6-3577-000 |
| Деталь: | FLAG, DUPLEXING SENSOR |
| Парткод: | FB6-3578-000 |
| Деталь: | ARM, SWING |
| Парткод: | FB6-3579-000 |
| Деталь: | GUIDE, DUPLEXING OPEN/CLOSE |
| Парткод: | FB6-3580-000 |
| Деталь: | GUIDE, DUPLEXING, UPPER |
| Парткод: | FM2-6099-000 |
| Деталь: | PLATE, GROUNDING, 1 |
| Парткод: | FB6-3583-000 |
| Деталь: | PLATE, GROUNDING, 2 |
| Парткод: | FB6-3584-000 |
| Деталь: | PLATE, GROUNDING, 3 |
| Парткод: | FB6-3585-000 |
| Деталь: | SHAFT, IDLER GEAR, 1 |
| Парткод: | FB6-3588-000 |
| Деталь: | GUIDE, DUPLEXING AUXILIARY |
| Парткод: | FB6-3589-000 |
| Деталь: | SUPPORT, DRAWER CABLE |
| Парткод: | FB6-3590-000 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 3 |
| Парткод: | FB6-6529-000 |
| Деталь: | ROLLER, DUPLEXING FEEDER, 4 |
| Парткод: | FB6-6530-000 |
| Деталь: | LINK, SOLENOID, 1 |
| Парткод: | FB6-3595-000 |
| Деталь: | LEVER, CLICK, REAR |
| Парткод: | FB6-4908-000 |
| Деталь: | PANEL, EX. DELIVERY FIX, FRONT |
| Парткод: | FF6-2147-000 |
| Деталь: | PANEL, DELIVERY, REAR |
| Парткод: | FB6-3599-000 |
| Деталь: | PIN, ADJUSTMENT |
| Парткод: | FB6-3600-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3638-000 |
| Деталь: | LEVER, CLICK, FRONT |
| Парткод: | FB6-3684-000 |
| Деталь: | PIN, SLIDE |
| Парткод: | FB6-3686-000 |
| Деталь: | ROLLER, LEVER, REAR |
| Парткод: | FB6-4918-000 |
| Деталь: | NUT,HEX,M5 |
| Парткод: | XA9-1624-000 |
| Деталь: | PLATE, FIXING POSITIONING |
| Парткод: | FB6-3698-000 |
| Деталь: | DUCT, JOINT |
| Парткод: | FB6-3880-000 |
| Деталь: | LINK, DELIVERY OPEN/CLOSE |
| Парткод: | FB6-3728-000 |
| Деталь: | PLATE, POSITIONING |
| Парткод: | FF6-2079-000 |
| Деталь: | SHAFT, DELIVERY OPEN/CLOSE |
| Парткод: | FF6-2081-000 |
| Деталь: | LABEL, DUPLEXING HANDLE |
| Парткод: | FB6-3893-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1974-020 |
| Деталь: | CLUTCH, ELECTRO-MAGNETIC |
| Парткод: | FH6-1986-000 |
| Деталь: | SOLENOID |
| Парткод: | FH6-5056-020 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1465-000 |
| Деталь: | ROLLER, LEVER, FRONT |
| Парткод: | FB6-3934-000 |
| Деталь: | BLOCK, ROLLER |
| Парткод: | FS5-1595-000 |
| Деталь: | PULLEY, 32T |
| Парткод: | FS5-3989-000 |
| Деталь: | COLLAR, RAIL |
| Парткод: | FS5-6948-000 |
| Деталь: | COLLAR |
| Парткод: | FS5-6950-000 |
| Деталь: | PULLEY, 28T/GEAR, 35T |
| Парткод: | FS6-3001-000 |
| Деталь: | PULLEY, 28T/GEAR, 24T |
| Парткод: | FS6-3002-000 |
| Деталь: | PULLEY, 32T |
| Парткод: | FS6-3003-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2360-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2924-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2867-000 |
| Деталь: | PLATE, POSITIONING, FRONT |
| Парткод: | FB6-3964-000 |
| Деталь: | PLATE, ADJUSTMENT |
| Парткод: | FF6-2143-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2861-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2822-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2829-000 |
| Деталь: | GEAR, 35T/24T |
| Парткод: | FU3-0310-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FU3-0311-000 |
| Деталь: | GEAR, 30T |
| Парткод: | FU3-0312-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FU3-0313-000 |
| Деталь: | GEAR, 15T |
| Парткод: | FU3-0314-000 |
| Деталь: | GEAR, 15T |
| Парткод: | FU3-0315-000 |
| Деталь: | SHAFT, GEAR |
| Парткод: | FB6-6546-000 |
| Деталь: | BUSHING, CONDUCTIVE |
| Парткод: | RS5-1325-000 |
| Деталь: | CONNECTOR, 25P, MALE |
| Парткод: | VS1-6920-025 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0733-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0734-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0735-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0520-000 |
| Деталь: | CABLE, DUPLEXING |
| Парткод: | FG3-2312-020 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2862-000 |
| Деталь: | CABLE, GROUNDING |
| Парткод: | FG3-3002-000 |
| Деталь: | RACK, SLIDE |
| Парткод: | FB6-3629-020 |
| Деталь: | FLAG, REG. SENSOR |
| Парткод: | FB6-3630-000 |
| Деталь: | MOTOR, STEPPING, DC24V |
| Парткод: | FH6-1253-020 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2832-000 |
| Деталь: | GEAR, 36T/12T |
| Парткод: | FU3-0318-000 |
| Деталь: | CABLE, SIDE REGIST. SENSOR |
| Парткод: | FG3-2313-020 |
| Деталь: | SIDE REGISTRATION DETECT UNIT |
| Парткод: | FG6-9060-000 |
| Деталь: | CLUTCH, ELECTRO-MAGNETIC |
| Парткод: | FH6-5052-020 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-407 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X8 |
| Парткод: | XB1-2300-807 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | SHIM |
| Парткод: | XD1-1104-135 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-322 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | RING,TOOTHED LOCK |
| Парткод: | XD2-2300-602 |
| Деталь: | PIN,SPRING |
| Парткод: | XD3-1300-102 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-122 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-282 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7440-006 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-003 |
| Деталь: | DUPLEXING ASSEMBLY |
| Парткод: | FG6-9058-190 |
| Деталь: | DUPLEXING ASSEMBLY |
| Парткод: | FM1-0352-160 |
| Деталь: | RIGHT PANEL, LOWER |
| Парткод: | FB6-3443-000 |
| Деталь: | RIGHT PANEL, LOWER |
| Парткод: | FB6-3504-000 |
| Деталь: | PANEL, PAPER DELIVERY, SMALL |
| Парткод: | FB6-3722-000 |
| Деталь: | UPPER PANEL, 1 |
| Парткод: | FB6-3765-020 |
| Деталь: | UPPER PANEL, 2 |
| Парткод: | FB6-3766-000 |
| Деталь: | TRAY, FACE-DOWN |
| Парткод: | FC7-9328-000 |
| Деталь: | LEFT PANEL, UPPER |
| Парткод: | FB6-3768-020 |
| Деталь: | PANEL, SMALL, FRONT |
| Парткод: | FC7-1433-000 |
| Деталь: | RIGHT PANEL, UPPER |
| Парткод: | FB6-3775-000 |
| Деталь: | RIGHT PANEL, MIDDLE |
| Парткод: | FB6-3776-000 |
| Деталь: | RIGHT PANEL, FRONT |
| Парткод: | FB6-3777-000 |
| Деталь: | RIGHT PANEL, REAR |
| Парткод: | FB6-3778-000 |
| Деталь: | LEFT PANEL, LOWER |
| Парткод: | FB6-3785-000 |
| Деталь: | LEFT PANEL, REAR UPPER |
| Парткод: | FB6-3834-000 |
| Деталь: | LEFT PANEL, REAR UPPER |
| Парткод: | FB6-4870-000 |
| Деталь: | LEFT PANEL, REAR LOWER |
| Парткод: | FB6-3835-000 |
| Деталь: | PEN, TOUCH PANEL |
| Парткод: | FB6-3950-000 |
| Деталь: | UPPER PANEL, LEFT |
| Парткод: | FG6-8927-020 |
| Деталь: | PANEL, FRONT |
| Парткод: | FG6-8945-020 |
| Деталь: | REAR PANEL, UPPER |
| Парткод: | FB6-3791-020 |
| Деталь: | REAR PANEL, UPPER |
| Парткод: | FB6-3791-040 |
| Деталь: | REAR PANEL, LOWER |
| Парткод: | FB6-3792-000 |
| Деталь: | PANEL, RACK, SMALL |
| Парткод: | FG6-9012-000 |
| Деталь: | RIGHT DOOR ASSEMBLY |
| Парткод: | FG6-9019-000 |
| Деталь: | CABLE, GROUNDING |
| Парткод: | FH2-5006-000 |
| Деталь: | TRAY, DELIVERY, 1 |
| Парткод: | FB6-3561-000 |
| Деталь: | TRAY, DELIVERY, 1 |
| Парткод: | FF6-2130-000 |
| Деталь: | TRAY, DELIVERY, 2 |
| Парткод: | FB6-3562-000 |
| Деталь: | CAP, DUST-PROOF |
| Парткод: | FB5-8385-000 |
| Деталь: | SEAL |
| Парткод: | FB2-4456-000 |
| Деталь: | SCREW,RS,M4X16 |
| Парткод: | XA9-0774-000 |
| Деталь: | HOLDER, TRAY |
| Парткод: | FB6-3566-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3569-020 |
| Деталь: | SCREW,STEPPED,M5X2.5 |
| Парткод: | FS5-9274-020 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2855-000 |
| Деталь: | COVER, RUBBER |
| Парткод: | FB6-3771-000 |
| Деталь: | SEAL, BLANKING |
| Парткод: | FC5-0166-000 |
| Деталь: | PANEL, EXHAUST |
| Парткод: | FB6-3051-000 |
| Деталь: | PANEL, BREAKER |
| Парткод: | FB6-3105-000 |
| Деталь: | PANEL, ASSIST |
| Парткод: | FB6-3106-000 |
| Деталь: | PANEL, ASSIST |
| Парткод: | FB6-6636-000 |
| Деталь: | PANEL, BLANKING, FAX |
| Парткод: | FB6-3793-000 |
| Деталь: | DUCT, JOINT, FIXING |
| Парткод: | FF6-2132-000 |
| Деталь: | SCREW,RS W/WASHER,M4X8 |
| Парткод: | XA9-0633-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-3894-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-3895-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-3896-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-4890-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-4920-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-4923-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5800-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-6385-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-6386-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-6387-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-6388-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-6389-000 |
| Деталь: | TRAY, DOCUMENT, UPPER |
| Парткод: | FB6-5450-000 |
| Деталь: | TRAY, DOCUMENT, LOWER |
| Парткод: | FB6-5451-000 |
| Деталь: | SCREW, STEPPED, M4 |
| Парткод: | FS5-9161-020 |
| Деталь: | CAP, BLANKING |
| Парткод: | FB6-3006-000 |
| Деталь: | COVER, LATCH, RIGHT |
| Парткод: | FB6-3376-000 |
| Деталь: | LABEL, BREAKER ON/OFF |
| Парткод: | FB6-3886-000 |
| Деталь: | LABEL, LASER WARNING |
| Парткод: | FS7-8332-000 |
| Деталь: | SCREW,RS,M4X12 |
| Парткод: | XA9-0783-000 |
| Деталь: | PLATE, MAGNET |
| Парткод: | FB6-2972-000 |
| Деталь: | SUPPORT, CABLE |
| Парткод: | FB6-3234-000 |
| Деталь: | PANEL, CARD |
| Парткод: | FB6-3788-020 |
| Деталь: | PLAIN WASHERS |
| Парткод: | FA2-7162-000 |
| Деталь: | TAPE, FRONT PANEL SUPPORT |
| Парткод: | FB6-2973-000 |
| Деталь: | CASE, SERVICE |
| Парткод: | FB6-2994-000 |
| Деталь: | CLAW, SWING |
| Парткод: | FB6-3139-000 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XA9-0605-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FC8-3782-000 |
| Деталь: | PANEL, RIGHT |
| Парткод: | FB6-3503-000 |
| Деталь: | HOOK, DOOR |
| Парткод: | FB6-3331-000 |
| Деталь: | PANEL, DECK PATH |
| Парткод: | FB6-3332-000 |
| Деталь: | BLOCK, ROLLER |
| Парткод: | FS5-1595-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU6-2924-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2789-000 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XB4-5400-807 |
| Деталь: | SCREW,P,M4X10 |
| Парткод: | XB4-5401-007 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X8 |
| Парткод: | XB1-2400-807 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M3X6 |
| Парткод: | XB4-7300-609 |
| Деталь: | SHIM |
| Парткод: | XD1-1108-239 |
| Деталь: | EXTERNAL COVERS, PANELS, ETC. |
| Парткод: | NPN |
| Деталь: | WASHER, WAVE |
| Парткод: | FS5-6957-000 |
| Деталь: | COVER, CLEANING |
| Парткод: | FB6-3113-000 |
| Деталь: | SUPPORT, BLADE SWING |
| Парткод: | FF6-2032-000 |
| Деталь: | SCREW,STEPPED,M3X2.2 |
| Парткод: | FS1-9010-020 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2840-000 |
| Деталь: | SCREW,M3X4 |
| Парткод: | XA9-0624-000 |
| Деталь: | SEAL, FRONT |
| Парткод: | FF6-2393-000 |
| Деталь: | SEAL, REAR |
| Парткод: | FF6-2394-000 |
| Деталь: | SEAL, BACK SURFACE |
| Парткод: | FB6-7070-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-407 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | TRANSFER CLEANING ASSEMBLY |
| Парткод: | FG6-8989-030 |
| Деталь: | SUPPORT, LOWER PANEL |
| Парткод: | FB6-3109-000 |
| Деталь: | SUPPORT, RAIL ROTATING |
| Парткод: | FF6-2100-000 |
| Деталь: | CABLE, TRANSFER H.V. TERMINAL |
| Парткод: | FG6-8946-000 |
| Деталь: | COVER, CONNECTOR |
| Парткод: | FH2-6552-000 |
| Деталь: | BLOCK, DISPATCHING |
| Парткод: | FB6-3137-000 |
| Деталь: | PLATE, HV CONTACT, 1 |
| Парткод: | FB6-3138-000 |
| Деталь: | PLATE, GROUNDING, 1 |
| Парткод: | FB6-3156-000 |
| Деталь: | CABLE, SECONDARY TRANSFER HV |
| Парткод: | FH2-7114-010 |
| Деталь: | CABLE, READER LATTICE |
| Парткод: | FG3-2350-000 |
| Деталь: | CABLE, C. PEDESTAL LATTICE |
| Парткод: | FG3-2351-020 |
| Деталь: | DUPLEXING DRIVER PCB ASSEMBLY |
| Парткод: | FG6-9665-000 |
| Деталь: | SCREW, M4X8 |
| Парткод: | XA9-0782-000 |
| Деталь: | COVER, CONNECTOR, 1 |
| Парткод: | FH2-5824-000 |
| Деталь: | CABLE, DC CONTROLLER MOUNT |
| Парткод: | FG3-2390-000 |
| Деталь: | PLATE |
| Парткод: | FB6-3084-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7507-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7507-007 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7507-008 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,W/WASHER,M3X6 |
| Парткод: | XB2-8300-607 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X8 |
| Парткод: | XB1-2300-807 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | WASHER,SPRING |
| Парткод: | XD1-3100-407 |
| Деталь: | SCREW,W/WASHER,M3X8 |
| Парткод: | XB2-8300-807 |
| Деталь: | MACHINE REAR PLATE 2 |
| Парткод: | NPN |
| Деталь: | CABLE, DUPLEXING DRAWER |
| Парткод: | FG3-2306-000 |
| Деталь: | SPACER |
| Парткод: | FS5-6955-000 |
| Деталь: | FLAG, OPEN/CLOSE SENSOR |
| Парткод: | FB6-3346-000 |
| Деталь: | HOOK, REGISTRATION, FRONT |
| Парткод: | FB6-3348-000 |
| Деталь: | HOOK, REGISTRATION, REAR |
| Парткод: | FB6-3349-000 |
| Деталь: | SHAFT, HOOK |
| Парткод: | FB6-3350-000 |
| Деталь: | LEVER, RELEASE |
| Парткод: | FB6-3351-000 |
| Деталь: | GUIDE, RE-PICK UP, UPPER |
| Парткод: | FB6-3356-000 |
| Деталь: | GUIDE, RE-PICK UP, LOWER |
| Парткод: | FB6-3357-000 |
| Деталь: | SUPPORT, DUPLEXING SENSOR |
| Парткод: | FB6-3358-000 |
| Деталь: | FLAG, RE-PICK UP SENSOR |
| Парткод: | FB6-3359-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3360-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3361-000 |
| Деталь: | LABEL, GUIDE HANDLE |
| Парткод: | FB6-3864-000 |
| Деталь: | SUPPORT, OPEN/CLOSE SENSOR |
| Парткод: | FF6-2054-000 |
| Деталь: | RAIL, FRONT |
| Парткод: | FF6-2101-000 |
| Деталь: | RAIL, REAR |
| Парткод: | FF6-2102-000 |
| Деталь: | SUPPORT, FEEDER POSITIONING |
| Парткод: | FF6-2129-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-004 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6319-026 |
| Деталь: | CONNECTOR, DRAWER |
| Парткод: | VS1-6919-025 |
| Деталь: | SCREW,STEPPED,M3 |
| Парткод: | FS5-9753-020 |
| Деталь: | SCREW,STEPPED,M3 |
| Парткод: | FS5-9758-020 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2790-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2791-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2792-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2793-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2796-000 |
| Деталь: | ROLLER, ARM |
| Парткод: | RB1-2152-000 |
| Деталь: | CABLE, RAIL MOUNT |
| Парткод: | FG3-2305-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7173-003 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | SHIM |
| Парткод: | XD1-1104-137 |
| Деталь: | MULTI PAPER FEED MOUNT ASSY |
| Парткод: | FG6-9021-000 |
| Деталь: | MULTI PAPER FEED MOUNT ASSY |
| Парткод: | FG6-9022-000 |
| Деталь: | SEAL, BLANKING |
| Парткод: | FC5-0166-000 |
| Деталь: | GUIDE, VERTICAL PATH RIB |
| Парткод: | FB6-5793-000 |
| Деталь: | PIN, LATCH |
| Парткод: | FB6-3866-000 |
| Деталь: | LEVER, COVER |
| Парткод: | FB6-3867-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RB1-6486-000 |
| Деталь: | FIN, DELIVERY |
| Парткод: | FB6-6645-000 |
| Деталь: | GUIDE, VERTICAL PATH DELIVERY |
| Парткод: | FB6-3547-000 |
| Деталь: | GUIDE, SPACER |
| Парткод: | FB6-4919-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3551-020 |
| Деталь: | FLAG, V. PATH DELIVERY SENSOR |
| Парткод: | FB6-3552-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3553-000 |
| Деталь: | ROLLER, DELIVERY, 1 |
| Парткод: | FB6-3554-000 |
| Деталь: | ROLLER, DELIVERY, 2 |
| Парткод: | FB6-3555-000 |
| Деталь: | ROLLER, VERTICAL PATH DELIVERY |
| Парткод: | FB6-3876-000 |
| Деталь: | GUIDE UNIT,V.PATH DELIV.LOWER |
| Парткод: | FM1-0421-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1059-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2834-000 |
| Деталь: | GEAR, 17T |
| Парткод: | FU3-0325-000 |
| Деталь: | BUSHING, CONDUCTIVE |
| Парткод: | RS5-1101-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | RB1-6666-000 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | VERTICAL PATH PANEL ASSEMBLY |
| Парткод: | FG6-9655-000 |
| Деталь: | HANDLE, REAR |
| Парткод: | FB6-3440-000 |
| Деталь: | DUCT, ELECTRICAL EXHAUST |
| Парткод: | FG6-8956-000 |
| Деталь: | MEMORY PCB ASSEMBLY |
| Парткод: | FG3-2345-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | CABLE, REGIST. MULTI SENSOR |
| Парткод: | FG3-2383-020 |
| Деталь: | DOUBLE SWITCH PCB ASSEMBLY |
| Парткод: | FM2-8314-000 |
| Деталь: | SWITCH, MAIN |
| Парткод: | FH7-6357-020 |
| Деталь: | CABLE, MAIN SWITCH |
| Парткод: | FG3-2366-000 |
| Деталь: | SCREW, RS, M4X12 |
| Парткод: | XA9-1030-000 |
| Деталь: | DUCT, EXHAUST, SMALL |
| Парткод: | FB6-3169-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7177-004 |
| Деталь: | SCREW,W/WASHER,M3X6 |
| Парткод: | XB2-4300-607 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-607 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | MACHINE REAR PLATE 1 |
| Парткод: | NPN |
| Деталь: | CABLE, CONNECTING |
| Парткод: | FG3-2372-020 |
| Деталь: | CABLE, HIGH VOLTAGE |
| Парткод: | FG3-2392-000 |
| Деталь: | CABLE, ATR |
| Парткод: | FG6-8981-000 |
| Деталь: | CONNECTING PCB ASSEMBLY |
| Парткод: | RG5-5469-000 |
| Деталь: | DRUM DRIVE ASSEMBLY |
| Парткод: | FG6-8964-000 |
| Деталь: | SHIM |
| Парткод: | FB2-6285-020 |
| Деталь: | SWING PLATE UNIT |
| Парткод: | FM3-3775-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | FH5-1051-020 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2838-000 |
| Деталь: | GEAR, 100T |
| Парткод: | FU3-0332-000 |
| Деталь: | GEAR, 30T/60T |
| Парткод: | FU3-0333-000 |
| Деталь: | GEAR, 20T/50T |
| Парткод: | FU3-0334-000 |
| Деталь: | GEAR, 42T |
| Парткод: | FU7-0403-000 |
| Деталь: | RECONDITIONED BEARING, BALL |
| Парткод: | XG9-0264-00U |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,TP,M3X6 |
| Парткод: | XB6-7300-607 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-182 |
| Деталь: | ITB DRIVE ASSEMBLY |
| Парткод: | FG6-9663-030 |
| Деталь: | PIN, GUIDE |
| Парткод: | FF5-6279-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | FC6-2915-000 |
| Деталь: | ROLLER, FACEDOWN |
| Парткод: | FB5-9570-000 |
| Деталь: | RING |
| Парткод: | FC6-5061-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB6-3532-000 |
| Деталь: | ROLLER, REVERSE |
| Парткод: | FB6-3875-000 |
| Деталь: | FLAG, DELIVERY SENSOR |
| Парткод: | FB6-3534-000 |
| Деталь: | COLLAR |
| Парткод: | FB6-3877-000 |
| Деталь: | ROLLER,DELIVERY FEEDER |
| Парткод: | FF6-2145-000 |
| Деталь: | GUIDE, INLET |
| Парткод: | FB6-3541-000 |
| Деталь: | SENSOR ARM & SPRING PARTS SET |
| Парткод: | FY7-0375-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3545-020 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB6-3564-000 |
| Деталь: | PLATE, PAPER FULL SENSOR |
| Парткод: | FF6-2131-000 |
| Деталь: | GUIDE, PAPER FEED |
| Парткод: | FF6-2070-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1975-020 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FK2-0149-000 |
| Деталь: | BUSHING |
| Парткод: | FU5-1726-000 |
| Деталь: | BUSHING |
| Парткод: | FS2-1544-000 |
| Деталь: | GEAR, 22T |
| Парткод: | FS5-0353-000 |
| Деталь: | PULLEY, 32T |
| Парткод: | FS5-3989-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FU3-0319-000 |
| Деталь: | GEAR, 17T/51T |
| Парткод: | FU3-0322-000 |
| Деталь: | GEAR, 28T |
| Парткод: | FU3-0323-000 |
| Деталь: | GEAR, 31T/17T |
| Парткод: | FU3-0324-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | RB1-6666-000 |
| Деталь: | RETAINER, FEEDER ROLLER |
| Парткод: | FB6-3897-000 |
| Деталь: | BUSHING |
| Парткод: | RS5-1324-000 |
| Деталь: | BUSHING, CONDUCTIVE |
| Парткод: | RS5-1325-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2859-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0736-000 |
| Деталь: | CABLE, DELIVERY PATH |
| Парткод: | FG3-2311-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XA9-0724-000 |
| Деталь: | FLAG, PAPER FULL SENSOR |
| Парткод: | FB6-3869-000 |
| Деталь: | ROLLER, FACE-DOWN DELIVERY |
| Парткод: | FB6-3874-000 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,P,M3X8 |
| Парткод: | XB4-5300-807 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-242 |
| Деталь: | DELIVERY VERTICAL PATH ASSY |
| Парткод: | FG6-9050-000 |
| Деталь: | RAIL, MAGENTA |
| Парткод: | FB6-6641-000 |
| Деталь: | RAIL, CYAN |
| Парткод: | FB6-3188-000 |
| Деталь: | RAIL, BLACK |
| Парткод: | FB6-3189-000 |
| Деталь: | DUCT, T. CARTRIDGE SIDE PLATE |
| Парткод: | FF6-2107-000 |
| Деталь: | PLATE, POSITIONING, LEFT |
| Парткод: | FF6-2039-000 |
| Деталь: | PLATE, DUCT SEPARATION |
| Парткод: | FB6-3800-000 |
| Деталь: | SEAL, DUCT, 1 |
| Парткод: | FB6-3801-000 |
| Деталь: | SEAL, DUCT, 7 |
| Парткод: | FB6-3807-000 |
| Деталь: | DUCT, DRUM UNIT |
| Парткод: | FF6-2106-000 |
| Деталь: | RING, RETAINING |
| Парткод: | FA3-8727-000 |
| Деталь: | SEAL, DUCT, UPPER |
| Парткод: | FB6-3116-000 |
| Деталь: | FEEDSCREW |
| Парткод: | FB6-3117-020 |
| Деталь: | SHEET |
| Парткод: | FB6-3118-000 |
| Деталь: | CASE, FEEDSCREW |
| Парткод: | FB6-3119-000 |
| Деталь: | SHUTTER, CLEANING |
| Парткод: | FB6-3120-000 |
| Деталь: | GUIDE |
| Парткод: | FB6-3152-000 |
| Деталь: | RAIL, CLEANING SUPPORT |
| Парткод: | FF6-2033-000 |
| Деталь: | BUSHING |
| Парткод: | FS6-1060-000 |
| Деталь: | GEAR, 25T |
| Парткод: | FS7-0579-000 |
| Деталь: | BLOCK, TONER CARTRIDGE LEVER |
| Парткод: | FB6-3190-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2842-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2843-000 |
| Деталь: | GEAR, 28T/28T |
| Парткод: | FU3-0343-000 |
| Деталь: | RAIL, DRUM UNIT |
| Парткод: | FB6-3172-000 |
| Деталь: | PLATE, TONER CARTRIDGE LOCK |
| Парткод: | FB6-3173-000 |
| Деталь: | RAIL, TONER CARTRIDGE |
| Парткод: | FB6-3175-000 |
| Деталь: | T GUIDE |
| Парткод: | FB6-3170-000 |
| Деталь: | RAIL |
| Парткод: | FF6-2040-000 |
| Деталь: | SHAFT, TONER CARTRIDGE LEVER |
| Парткод: | FB6-3192-000 |
| Деталь: | BAR, SLIDE |
| Парткод: | FB6-3193-000 |
| Деталь: | GEAR, 32T |
| Парткод: | FU3-0345-000 |
| Деталь: | SCREW UNIT, ITB CLEANER |
| Парткод: | FM1-0431-000 |
| Деталь: | SCREW,P,M3X6 |
| Парткод: | XB4-5300-607 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-805 |
| Деталь: | SCREW,TP,M3X4 |
| Парткод: | XB6-7300-407 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X5 |
| Парткод: | XB1-2300-507 |
| Деталь: | INTERNAL COMPONENTS 3 |
| Парткод: | NPN |
| Деталь: | FAN |
| Парткод: | FH6-1579-020 |
| Деталь: | SCREW,P,M4X35 |
| Парткод: | XB4-5403-507 |
| Деталь: | MULTI FAN ASSEMBLY |
| Парткод: | FG6-9016-000 |
Коды ошибок
E000-0001
E001-0001
E001-0003
E001-0004
E001-0005
E002-0002
E002-0003
E002-0004
E002-0005
E002-0006
E002-0007
E002-0008
E002-0101
E002-0102
E003-0001
E004-0001
E004-0002
E004-0003
E004-0004
E004-0005
E012-0001
E012-0002
E012-0003
E020-xx20
E020-xx24
E020-xx25
E020-xx30
E020-xx34
E020-xx35
E020-xx40
E020-xx50
E020-xx60
E020-xx70
E020-xx80
E020-xx81
E020-xxA0
E020-xxB0
E020-xxC0
E020-xxD0
E032-0000
E110-0110
E110-0210
E110-0310
E110-0410
E202-0000
E202-0001
E220-0000
E240-0000
E243-0000
E248-0000
E302-0000
E302-0001
E315-0001
E351-0000
E402
E404
E500
E503-0002
E504-0001
E504-0002
E504-0003
E504-0004
E505-0001
E512
E512-0001
E512-0002
E514
E530
E530-0001
E530-0002
E531
E531-0001
E531-0002
E532-0001
E532-0002
E535-0001
E535-0002
E535-0003
E535-0004
E537
E540-0001
E540-0002
E540-0003
E577
E580
E584-0001
E584-0002
E584-0003
E5F0-0001
E5F0-0002
E5F1-0001
E5F1-0002
E5F2-0001
E5F2-0002
E5F3-0001
E5F3-0002
E5F4-0001
E5F4-0002
E5F5-0001
E5F5-0002
E5F6-0001
E5F6-0002
E5F6-0003
E5F6-0004
E5F6-0005
E5F8-0001
E5F8-0002
E5F8-0003
E5F9-0001
E5F9-0002
E5F9-0003
E602-0001
E602-0002
E602-0003
E602-0005
E602-0006
E602-0007
E604-0000
E605
E606-0001
E606-0002
E674-0000
E711-0001
E711-0002
E712
E713
E716
E717-0000
E719-0000
E731
E732-0000
E733-0000
E733-0001
E740-0002
E744
E745
E747
E804-0000
E804-0004
E805-0000
E805-0001
Описание
| Error code: | E000-0001 |
| Description: | Fixing fault |
| Causes: | After the fixing heater has gone on, the reading of the main thermistor is not 50 deg C within about 1.5 sec. Cause The fixing film unit is faulty. The engine controller PCB is faulty. |
| Remedy: | - Replace the fixing film unit. - Replace the engine controller PCB. |
| Error code: | E001-0001 |
| Description: | Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control. |
| Causes: | The sub thermistor detected a temperature of higher than 290 degree C. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E001-0003 |
| Description: | Abnormally high temperature rise of fixing unit (circuit trouble) When fixing sub-thermistor 2 has detected a high temperature (ASIC detection) |
| Remedy: | Check the connection of the connector in the thermistor wiring (wirepinching, disconnection). Replace the fixing unit. Replace the IH unit, halogen heater, fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E001-0004 |
| Description: | Abnormal high temperature in fixing |
| Causes: | The sub thermistor 2 detected a temperature exceeding a specified temperature |
| Remedy: | Replace the fixing assembly. Replace the DC controller PCB. |
| Error code: | E001-0005 |
| Description: | The fixing unit is overheating. At the end of initial rotation, the difference in temperature between the sub (end) thermistor and the main (non-contact) thermistor is 20°C or more for 100 msec. (A reversal in temperature (caused, for example, by a piece of residual paper) is detected.) |
| Remedy: | Check on remaining paper in the fixing unit, Replace the fixing unit To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR |
| Error code: | E002-0002 |
| Description: | Insufficient temperature rise of fixing unit When the fixing main thermistor fails to reach 80 deg C within the prescribed period of time after reaching 50 deg C during warm-up |
| Remedy: | Replace the fixing belt unit. Replace the fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E002-0003 |
| Description: | Insufficient temperature rise of fixing unit When the fixing main thermistor fails to reach 110 deg C within the prescribed period of time after reaching 80 deg C during warm-up |
| Remedy: | Replace the fixing belt unit. Replace the fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E002-0004 |
| Description: | Insufficient temperature rise of fixing unit When the fixing main thermistor fails to reach 130 deg C within the prescribed period of time after reaching 110 deg C during warm-up |
| Remedy: | Replace the fixing belt unit. Replace the fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E002-0005 |
| Description: | Insufficient temperature rise of fixing unit When the fixing main thermistor fails to reach 150 deg C within the prescribed period of time after reaching 130 deg C during warm-up |
| Remedy: | Replace the fixing belt unit. Replace the fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E002-0006 |
| Description: | Insufficient temperature rise of fixing unit When the fixing main thermistor fails to reach 170 deg C within the prescribed period of time after reaching 150 deg C during warm-up |
| Remedy: | Replace the fixing belt unit. Replace the fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E002-0007 |
| Description: | The rise in temperature of the fixing unit is inadequate. The output of the non-contact thermistor does not reach 180°C within 180 sec after it has reached 160°C. |
| Remedy: | Check on connection of the thermistor, Replace the fixing unit To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR |
| Error code: | E002-0008 |
| Description: | The rise in temperature of the fixing unit is inadequate. The output of the non-contact thermistor does not reach 190°C within 180 sec after it has reached 180°C. |
| Remedy: | Check on connection of the thermistor, Replace the fixing unit To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR |
| Error code: | E002-0101 |
| Description: | Insufficient temperature rise of fixing unit When the pressure main thermistor fails to reach 80 deg C within the prescribed period of time after reaching 50 deg C during warm-up |
| Remedy: | Replace the fixing belt unit. Replace the fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E002-0102 |
| Description: | Insufficient temperature rise of fixing unit When the pressure main thermistor fails to reach 100 deg C within the prescribed period of time after reaching 80 deg C during warm-up |
| Remedy: | Replace the fixing belt unit. Replace the fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E003-0001 |
| Description: | Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
| Causes: | The sub thermistor detected a temperature of lower than 80 degree C for more than 2 seconds when 20 seconds elapsed after start of the power distribution to the heater. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E004-0001 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0002 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the fixing sub heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0003 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater or the fixing sub heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0004 |
| Description: | Mismatch of Fixing Assembly type |
| Causes: | A fixing assembly of another product was installed. |
| Remedy: | 1. Replace the fixing assembly with that of this product. |
| Error code: | E004-0005 |
| Description: | Fixing Relay fusion error |
| Causes: | At power ON or recovery from sleep mode, a zero cross signal was detected three times during the period of 100 ms after completion of CPU initialization. |
| Remedy: | 1. Check the harness/connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB. |
| Error code: | E012-0001 |
| Description: | Error in ITB motor activation. |
| Causes: | If the ITB motor speed detection signal comes off the specified cycle after it turned once to the specified cycle. Cause Failure in ITB motor, failure in DC controller PCB. |
| Remedy: | - Check the connectors of ITB motor and DC controller PCB - Replace the ITB motor - Replace the DC controller PCB |
| Error code: | E012-0002 |
| Description: | ITB motor or drum motor failure |
| Causes: | Yellow drum motor error (Failure in drum motor initial operation) The target speed was not reached within a specified time after startup of the motor |
| Remedy: | Check the contact of the connector between the drum motor (J515) and the DC controller PCB (J81). Replace the drum motor. Replace the main drive assembly. |
| Error code: | E012-0003 |
| Description: | ITB motor or drum motor failure |
| Causes: | Yellow drum motor error (Failure in drum motor rotation) The motor rotated out of the target speed during rotation after the target speed was reached. |
| Remedy: | Check the contact of the connector between the drum motor (J515) and the DC controller PCB (J81). Replace the drum motor. Replace the main drive assembly |
| Error code: | E020-xx20 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk ATR sensor trouble or a broken/disconnected wire. The drum unit is not installed properly or there is trouble in the unit. |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xx24 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk SALT sensor trouble or a broken/disconnected wire. There is trouble in the drum unit. |
| Remedy: | Replace the SALT sensor (clean it). Check the drum unit connections. Replace the drum unit. |
| Error code: | E020-xx25 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk SALT sensor trouble or a broken/disconnected wire. There is trouble in the drum unit. Deterioration in ITB. |
| Remedy: | Replace the SALT sensor (clean the sensor window). Replace the drum unit (check its connections). Replace the ITB (clean it). |
| Error code: | E020-xx30 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk ATR sensor trouble or a broken/disconnected wire. Incorrect setting of ATR sensor operation values. The drum unit is not installed properly or there is trouble in the unit. |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xx34 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Sample images drawn by ATR control are not created. SALT sensor trouble or a broken/disconnected wire. There is trouble in the drum unit. Deterioration in ITB. |
| Remedy: | Replace the SALT sensor (clean the sensor window). Replace the drum unit (check its connections). Replace the ITB (clean it). |
| Error code: | E020-xx35 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk SALT sensor trouble or a broken/disconnected wire |
| Remedy: | Replace the SALT sensor (clean it). |
| Error code: | E020-xx40 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Incorrect setting of ATR sensor operation values. ATR sensor trouble or a broken/disconnected wire. The drum unit is not installed properly (the copier cannot detect the drum unit) or there is trouble in the unit. |
| Remedy: | Replace the SALT sensor (clean it). Replace the drum unit (check its connections). |
| Error code: | E020-xx50 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Incorrect developer density operation value which was set when the new drum unit was installed |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xx60 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Incorrect developer density target value which was set when the new drum unit was installed (value is extremely low) |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xx70 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Incorrect developer density target value which was set when the new drum unit was installed (value is extremely low) |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xx80 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Density value is extremely high for the ITB surface reflectivity when the new drum unit was installed. SALT sensor trouble. |
| Remedy: | Replace the SALT sensor (clean the sensor window). Replace the drum unit (check its connections). Replace the ITB (clean it). |
| Error code: | E020-xx81 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Density value is extremely low for the ITB surface reflectivity when the new drum unit was installed. SALT sensor trouble. Dirty ITB. |
| Remedy: | Replace the SALT sensor (clean the sensor window). Replace the drum unit (check its connections). Replace the ITB (clean it). |
| Error code: | E020-xxA0 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Measured value of the detected developer density is extremely low. Trouble in the ATR sensor. Trouble in the drum unit. |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xxB0 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk T/D ratio has dropped due to the drum unit end-of-life. Broken or disconnected wire in the ATR sensor. |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xxC0 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Trouble in the supply of the toner from the toner cartridge to the developer. Too much toner is supplied to the developer. Broken or disconnected wire in the ATR sensor. |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xxD0 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk No toner is supplied from the toner cartridge to the developer. TCRG motor fails to run. An empty cartridge is being used. The toner supply port of the drum unit is damaged. Broken or disconnected wire in the ATR sensor. |
| Remedy: | Replace the toner cartridge motor. Replace the drum unit (check its connections). |
| Error code: | E032-0000 |
| Description: | The counter of the NE controller fails to operate. The counter function of the NE controller fails to operate. |
| Remedy: | - Check if the connecter of the main controller PCB is mounted properly. - Replace the main controller PCB. - Replace the copy data controller or the NE controller. |
| Error code: | E110-0110 |
| Description: | Laser scanner motor running trouble Trouble in the running of the laser scanner motor for Y |
| Remedy: | Replace the laser scanner (Y) and the DC controller PCB 1 (IMG). |
| Error code: | E110-0210 |
| Description: | Laser scanner motor running trouble Trouble in the running of the laser scanner motor for M |
| Remedy: | Replace the laser scanner (M) and the DC controller PCB 1 (IMG). |
| Error code: | E110-0310 |
| Description: | Laser scanner motor running trouble Trouble in the running of the laser scanner motor for C |
| Remedy: | Replace the laser scanner (C) and the DC controller PCB 1 (IMG). |
| Error code: | E110-0410 |
| Description: | Laser scanner motor running trouble Trouble in the running of the laser scanner motor for Bk |
| Remedy: | Replace the laser scanner (Bk) and the DC controller PCB 1 (IMG). |
| Error code: | E202-0000 |
| Description: | A fault has occurred in detecting the No. 1 mirror home position. The No. 1 mirror base moves in reverse but does not move to its home position. The home position sensor does not go ON within a specific period of time. |
| Remedy: | Caution No code will be indicated. The keys will be locked. You can check the code in service mode (COPIER>DISPLAY>ERR). - Check if the scanner motor is connected properly, and replace the scanner motor if necessary. - Check if the connector (J1720) of the relay PCB is mounted properly. - Replace the scanner home position sensor. - Replace the reader controller PCB. |
| Error code: | E202-0001 |
| Description: | Reader HP sensor fault |
| Causes: | Reader HP outward fault The CCD unit moves backward, but does not move to the home position. |
| Remedy: | - Replace reader HP sensor. - Replace reader motor sensor. - Replace reader unit. |
| Error code: | E220-0000 |
| Description: | A fault has occurred in activating the scanning lamp. The intensity of the scanning lamp has dropped. During shading adjustment at time of power-on, the intensity detected by the CCD is below a specific level. |
| Remedy: | - Check if the connecter (J852, J853) of the light control PCB is mounted properly. - Replace the scanning lamp heater. - Replace the light control PCB. - Replace the reader controller PCB. |
| Error code: | E240-0000 |
| Description: | Error in communication between main controller and DC controller Serial communication error |
| Causes: | The main controller PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | Check the connector connections. Check the DC controller PCB (MAISY). Replace the No.1 main controller circuit. |
| Error code: | E243-0000 |
| Description: | Control panel unit error Communication between the main controller and the control panel unit is abnormal. |
| Causes: | The control panel CPU PCB is faulty. The main controller PCB is faulty. |
| Remedy: | Check on connection between the main controller PCB and the control panel unit |
| Error code: | E248-0000 |
| Description: | There is an error in the EEPROM. At time of start-up, a check error has occurred on the SRAM board |
| Remedy: | Turn off the main power, and check the SRAM board; then, as necessary, replace the SRAM board, and turn on the main power. |
| Error code: | E302-0000 |
| Description: | A fault has occurred in relation to shading correction. A time-out has occurred in shading operation. The shading processing does not end 1 sec after it has started. |
| Remedy: | - Check if the connecter (J1502, J1503) of the CCD PCB is mounted properly. - Check if the connecter (J1107, J1108) of the reader control PCB is mounted properly. - Replace the CCD PCB. - Replace the reader controller PCB. |
| Error code: | E302-0001 |
| Description: | Shading error |
| Causes: | When the light intensity is below the reference level at shading |
| Remedy: | 1. Disconnect and then connect the Flexible Cable. 2. Replace the Flexible Cable. 3. Replace the CIS Unit. 4. Replace the Main Controller PCB (PCB2). |
| Error code: | E315-0001 |
| Description: | The image data is faulty. A time-out condition has occurred in encoding/ decoding processing of image data. |
| Error code: | E351-0000 |
| Description: | Main controller PCB fault |
| Causes: | Internal error of the main controller PCB Cause Main controller PCB fault. |
| Remedy: | - Check the connection of main controller PCB. - Replace main controller PCB. |
| Error code: | E402 |
| Description: | Abnormally low toner density detected Magenta TCR Sensor - Mixture ratio of the toner and carrier in the developing machine is lower than the specified value. |
| Causes: | • Photoconductor Unit/C • Photoconductor Unit/M • Photoconductor Unit/Y • Toner Supply Motor Y/M (M6) • Toner Supply Motor C/K (M7) • Mechanical Control Board (PWB-M) • Controller Board (PWB-P) |
| Remedy: | 1 Perform image troubleshooting procedure if image density is low. - - 2 Clean the TCR Sensor window on the underside of the Photoconductor Unit if dirty. - - 3 M6, M7 operation check PWB-M CNDM2-10 to 13(M6) PWB-M CNDM3-10 to 13(M7) C-22 C-23 4 Reinstall Photoconductor Unit. - - 5 Change Photoconductor Unit. - - 6 Change PWB-M - - 7 Change PWB-P |
| Error code: | E404 |
| Description: | Abnormally low toner density detected Yellow TCR Sensor - Mixture ratio of the toner and carrier in the developing machine is lower than the specified value. |
| Causes: | • Photoconductor Unit/C • Photoconductor Unit/M • Photoconductor Unit/Y • Toner Supply Motor Y/M (M6) • Toner Supply Motor C/K (M7) • Mechanical Control Board (PWB-M) • Controller Board (PWB-P) |
| Remedy: | 1 Perform image troubleshooting procedure if image density is low. - - 2 Clean the TCR Sensor window on the underside of the Photoconductor Unit if dirty. - - 3 M6, M7 operation check PWB-M CNDM2-10 to 13(M6) PWB-M CNDM3-10 to 13(M7) C-22 C-23 4 Reinstall Photoconductor Unit. - - 5 Change Photoconductor Unit. - - 6 Change PWB-M - - 7 Change PWB-P |
| Error code: | E500 |
| Display: | Print Unable E5 Turn the power off and then back on again. |
| Description: | MAIN MOTOR failure MOTOR ASSY is not turning, or not turning normally. |
| Causes: | • Main Motor (M1) • Mechanical Control Board (PWB-M) • DC Power Supply (PU1) |
| Remedy: | 1. Connectors on LVPS and MCU Board Assy are correctly connected? 2. Check the connections between MAIN MOTOR <=> LVPS <=> MCU Board Assy. Disconnection/slant connection of a connector Disconnection/damage of a harness. 3. MAIN MOTOR is not turning normally due to an abnormal load on it. Check GEAR ASSY HOUSING`s Drive Transmission Path. 4. Replace MAIN MOTOR. 5. Replace LVPS. 6. Replace MCU Board Assy. |
| Error code: | E503-0002 |
| Description: | Saddle communication error When communication with the saddle stitcher is interrupted |
| Remedy: | - Check the connections between the saddle stitcher controller PCB and finisher controller PCB. - Replace the saddle stitcher controller PCB and finisher controller PCB. |
| Error code: | E504-0001 |
| Description: | There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2 The height sensor (PS1) is faulty. The communication between the height sensor and the finisher controller PCB is prevented. Or, there is a fault in the communication data. |
| Error code: | E504-0002 |
| Description: | There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2 The height sensor (PS1) is faulty. The communication between the height sensor and the finisher controller PCB is prevented for 0.1 sec or more. |
| Error code: | E504-0003 |
| Description: | There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2 The connector of the height sensor (PS1) is faulty. This fault is detected at power-on. |
| Error code: | E504-0004 |
| Description: | There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2 The DIP switch for the height sensor (PS1) is not adjusted correctly. There is a fault in the adjustment of the sensor by the DIP switch. |
| Causes: | The output of the height sensor (PS1) is faulty. |
| Error code: | E505-0001 |
| Description: | Finisher backup memory error When the checksum value calculated by the CPU differs from the checksum values of the data held inside the RAM |
| Causes: | The backup RAM is faulty. |
| Remedy: | Replace the finisher controller PCB. |
| Error code: | E512 |
| Description: | Transport jam during duplex printing (paper not reaching horizontal transport sensor-2): Paper which has passed the horizontal transport sensor-1 does not reach the horizontal transport sensor-2 during duplex printing. |
| Remedy: | Is there any paper at the reverse section when the exit cover is opened? → YES → Remove the paper. NO Is the Horizontal transport sensor-2 working? (Perform the input check in the test mode: 03-[FAX]OFF/[9]/[G]) ↓ → NO → 1. Check if the connector of the Horizontal transport sensor-2 is not disconnected. 2. Check if the connector CN334 on the LGC board is not disconnected. 3. Check if the connector pins are not disconnected and the harness is not open circuited. 4. Check if the conductor pattern on the LGC board is not short- or open-circuited. 5. Replace the Horizontal transport sensor-2. 6. Replace the LGC board. YES Is the transport roller 3/4 at the horizontal transport section rotating? (Perform the output check in the test mode: 03-110/221) ↓ → NO → 1. Check if the connectors of the horizontal transport section driving clutch-1 and horizontal transport section driving clutch-3 are not disconnected. 2. Check if the connectors of the horizontal transport section driving clutch-1 and horizontal transport section driving clutch-3 are not misconnected (drive clutch: black-black, transport clutch 2: blackblue) 3. Check if the connector CN334 on the LGC board is not disconnected. 4. Check if the connector pins are not disconnected and the harness is not open circuited. 5. Check if the conductor pattern on the LGC board is not short- or open-circuited. 6. Replace the and horizontal transport section driving clutch-1 and and horizontal transport section driving clutch-2. 7. Replace the LGC board. 8. Check if the front side timing belt is put on properly. YES Check the condition of the rollers at the horizontal transport section and clean or replace them |
| Error code: | E512-0001 |
| Description: | There is a fault in delivery. Finisher-N1/Saddle Finisher-N2 The delivery roller, feed motor (M2), or feed motor clock sensor (PI10) is faulty. The delivery motor clock sensor fails to generate the target number of clock pulses within 10 sec at the start of operation. |
| Causes: | The delivery motor is faulty. The delivery motor clock sensor (PI10) is faulty. |
| Error code: | E512-0002 |
| Description: | There is a fault in delivery. Finisher-N1/Saddle Finisher-N2 The delivery roller, feeder motor (M2), or feeder motor clock sensor (PI10) is faulty. There is no clock pulse for a feed equivalent for 0.2 during communication. |
| Causes: | The delivery motor is faulty. The delivery motor clock sensor (PI10) is faulty. |
| Error code: | E514 |
| Description: | PAGE Timeout - The PAGEC/PAGE signal was not received within 60sec after transmitting PFA. |
| Causes: | • FFC-ASSY ESS • PWBA MCU • PWBA ESS |
| Remedy: | 1 Check of connection of FFC-ASSY ESS Re-connect FFC-ASSY ESS of PWBA ESS to PWBA MCU. Does the error recur when a test print is made? Go to Step [2]. End of procedure 2 Check of connection of FFC-ASSY ESS Is FFC-ASSY ESS damaged or broken? Replace FFCASSY ESS. Go to Step [3]. 3 Check after replacement of PWBA MCU Replace PWBA MCU. Does the error recur when a test print is made? Replace PWBA ESS. End of procedure |
| Error code: | E530 |
| Description: | Humidity Sensor Error - When the Input from SENSOR HUM & TEMP is out of specification. |
| Causes: | • HARNESS ASSY MAIN • SENSOR HUM & TEMP |
| Remedy: | 1 Continuity check of HARNESS ASSY MAIN Disconnect P/J413 from PWBA MCU. Is the continuity normal between all terminals of J413 . J104? Go to Step [2]. Repair broken or shorted part. 2 Check after replacement of SENSOR HUM & TEMP Replace SENSOR HUM & TEMP. Does the error recur when the power is turned ON? Replace PWBA MCU. End of procedure |
| Error code: | E530-0001 |
| Description: | There is a fault in alignment. Finisher-N1/Saddle Finisher-N2 There is an excess load on the alignment motor (M3), aligning plate home position sensor (PI6), or aligning plate. The aligning plate does not leave the aligning plate home position sensor when the alignment motor has been driven for 2 sec. |
| Causes: | The alignment motor (M3) is faulty. The alignment plate home position sensor (PI6) is faulty. |
| Remedy: | Replace the front adjuster plate HP sensor (PI36) , Replace the front adjuster plate motor (M33) |
| Error code: | E530-0002 |
| Description: | There is a fault in alignment. Finisher-N1/Saddle Finisher-N2 There is an excess load on the rear alignment motor (M3), rear aligning plate home position sensor (PI6), or rear aligning plate. The aligning plate does not return to its home position when the aligning plate motor has been driven for 2 sec. |
| Causes: | The alignment motor (M3) is faulty. The alignment plate home position sensor (PI6) is faulty. |
| Remedy: | Replace the front adjuster plate HP sensor (PI36) , Replace the front adjuster plate motor (M33) |
| Error code: | E531 |
| Description: | Finisher; staple motor, staple sensor, finisher board. |
| Causes: | The stapler unit swing motor (M4) fails to rotate. The stapler motor (M5) fails to rotate. |
| Remedy: | 1) Wiring It the wiring between the stapler unit and the finisher controller PCB normal? NO : Correct the wiring. 2) Stapler unit, Finisher controller PCB Try replacing the stapler unit. Is the fault corrected? YES : End. NO : Replace the finisher controller PCB. |
| Error code: | E531-0001 |
| Description: | - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure - The staple home position was not left when 400 ms have lapsed since start of staple operation. |
| Causes: | The stapler motor (M6) is faulty. The stapler home position sensor detecting switch (MS7) is faulty. |
| Remedy: | - Check the connector of the staple unit. - Replace the staple unit. - Replace the finisher controller PCB. |
| Error code: | E531-0002 |
| Description: | - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure - The staple home position had been left once, but it was not reached again when 400 ms have lapsed since start of staple operation. In addition, the staple home position could not be reached by performing reverse operation for 400 ms. |
| Causes: | The stapler motor (M6) is faulty. The stapler home position sensor detecting switch (MS7) is faulty. |
| Remedy: | - Check the connector of the staple unit. - Replace the staple unit. - Replace the finisher controller PCB. |
| Error code: | E532-0001 |
| Description: | There is a fault in the shift of the stapler. Finisher-N1/Saddle Finisher-N2 The stapler shift motor (M4) or the stapler shift home position sensor (PI7) is faulty. There is a fault in the path of the stapler shift base. The stapler shift base does not leave the stapler shift home position sensor when the stapler shift motor has been driven for 4 sec. |
| Causes: | The stapler shift motor (M4) is faulty. The stapler shift home position sensor (PI7) is faulty. |
| Remedy: | Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35) |
| Error code: | E532-0002 |
| Description: | There is a fault in the shift of the stapler. Finisher-N1/Saddle Finisher-N2 The stapler shift motor (M4) or the stapler shift home position sensor (PI7) is faulty. There is a fault in the path of the stapler shift base. The stapler shift base does not return from the stapler shift home position sensor when the stapler shift motor has been driven for 4 sec. |
| Causes: | The stapler shift motor (M4) is faulty. The stapler shift home position sensor (PI7) is faulty. |
| Remedy: | Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35) |
| Error code: | E535-0001 |
| Description: | There is a fault in the swing mechanism. Finisher-N1/Saddle Finisher-N2 The swing motor (M7) or the swing guide open sensor (PI18) is faulty. The swing guide closed switch does not go ON when the swing motor has been rotated in reverse for 1 sec. |
| Causes: | The delivery motor (M2) is faulty. The swing guide open sensor (PI18) is faulty. |
| Remedy: | Replace the swing HP sensor (PI35) , Replace the swing motor (M36) |
| Error code: | E535-0002 |
| Description: | There is a fault in the swing mechanism. Finisher-N1/Saddle Finisher-N2 The swing motor (M7) or the swing guide closed switch (MS6) is faulty. The swing guide open switch does not go ON when the swing motor has been rotated in reverse for 1 sec. |
| Causes: | The safety area switch (MS3) is faulty. The swing guide open detecting switch (MS6) is faulty. |
| Remedy: | Replace the swing HP sensor (PI35) , Replace the swing motor (M36) |
| Error code: | E535-0003 |
| Description: | There is an error in the staple swing mechanism. (finisher R1/R2) There is an error in relation to an hazardous area.. |
| Causes: | The delivery motor (M2) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. |
| Remedy: | 1) Check the swing home position sensor. Is the sensor normal? 2) Check the writing between the finisher controller PCB and the swing motor. Is the wiring normal? 3) Check the swing mechanism. Is there a fault? 4) Try replacing the swing motor. Is the problem corrected? |
| Error code: | E535-0004 |
| Description: | There is a fault in the swing mechanism. Finisher-N1/Saddle Finisher-N2 The swing motor (M7) or the swing motor clock sensor (PI20) is faulty. There is no clock pulse for 0.2 sec while swinging operation is under way. |
| Remedy: | 1. The connector of the swing guide height detection sensor (S118) or the swing guide motor (M110) are disconnected. 2. The wiring of the swing guide height detection sensor or the swing guide motor are faulty. 3. The swing guide height detection sensor is faulty. 4. The swing guide motor is faulty. 5. The finisher controller PCB is faulty. |
| Error code: | E537 |
| Description: | Fuser Fail - Control Thermistor detected a temperature exceeding the specified temperature. Safety Thermistor detected a temperature exceeding the specified temperature. - The Control Thermistor did not detect a Ready even though the specified time elapsed from Main Lamp ON at Warm Up. - The Main Lamp continues to stay lit even after time specified for the Main Lamp elapsed after the Control Thermistor detected a Ready. - The Control Thermistor detected a temperature below the specified temperature even after the specified time elapsed from Main Lamp ON at Warm Up. - The latch lever of FUSER ASSY is set incorrectly. |
| Causes: | • FUSER ASSY • HARNESS ASSY MCU C/L • FFC-ASSY LV/MCU • HARNESS ASSY AC • PWBA FUSER CONT • LV/HVPS • HARNESS ASSY MAIN • PWBA MCU |
| Remedy: | 1 Check of FUSER ASSY attachment Is the FUSER ASSY attached correctly to the printer? In particular, is the connector connected firmly to the printer? Is the connector latched normally? Go to Step [3]. Re-attach, and go to step [2]. 2 Does the error recur when the power is turned ON? Go to Step [3]. End of procedure 3 Check after replacement of the FUSER ASSY Replace FUSER ASSY. Does the error recur when the power is turned ON? Go to Step [4]. End of procedure 4 Continuity check of HARNESS ASSY MCU C/L Allow FUSER ASSY to cool down before performing work. Remove FUSER ASSY. Is the continuity normal between all terminals of J614A . J417 and J614 . J3? Go to Step [5]. Replace HARNESS ASSY MCU C/L. 5 Continuity check of FFC-ASSY LV/MCU Disconnect P/J401 from PWBA MCU and P/ J500 from LV/HVPS. Do all of the wiring below have normal continuity? P401-21 . J500-2 P401-22 . J500-1 Go to Step [6]. Replace FFCASSY LV/MCU. 6 Continuity check of HARNESS ASSY AC Disconnect P/J503 from LV/HVPS and P/J2 from PWBA FUSER CONT. Do all of the wiring below have normal continuity? J503-5 . J2-5 J503-6 . J2-6 Go to Step [7]. Replace HARNESS ASSY AC. 7 Check after replacement of PWBA FUSER CONT Replace PWBA FUSER CONT. Does the error occur when the power is turned ON? Go to Step [8]. End of procedure 8 Check after replacement of LV/HVPS Replace LV/HVPS. Does the error occur when the power is turned ON? Go to Step [9]. End of procedure 9 Continuity check of HARNESS ASSY MAIN Disconnect P/J1 from PWBA FUSER CONT and P/J410 from PWBA MCU. Do all of the wiring below have normal continuity? P/J1-1 . P/J410-10 P/J1-3 . P/J410-9 Replace PWBA MCU. Replace HARNESS ASSY MAIN. |
| Error code: | E540-0001 |
| Description: | - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected. |
| Causes: | The tray lift motor (M5) is faulty. The tray lift motor clock sensor 1/2 (PI19/PI20) is faulty. The tray home position sensor (PI8) is faulty. |
| Remedy: | - Check the connector of the standard tray HP sensor. - Check the connector of the standard tray clock sensor. - Check the connector of the standard tray shift motor. - Replace the standard tray HP sensor. - Replace the standard tray clock sensor. - Replace the standard tray shift motor. - Replace the finisher controller PCB. |
| Error code: | E540-0002 |
| Description: | - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time. |
| Causes: | The tray paper limit detecting switch (MS4) is faulty. |
| Remedy: | - Check the connector of the standard tray HP sensor. - Check the connector of the standard tray clock sensor. - Check the connector of the standard tray shift motor. - Replace the standard tray HP sensor. - Replace the standard tray clock sensor. - Replace the standard tray shift motor. - Replace the finisher controller PCB. |
| Error code: | E540-0003 |
| Description: | - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was operated, but it did not reach the sensor within 300 ms. |
| Causes: | The tray lifter motor (M5) is faulty. The tray lifter motor clock sensor 1/2 (PI19/PI20) is faulty. |
| Remedy: | - Check the connector of the standard tray HP sensor. - Check the connector of the standard tray clock sensor. - Check the connector of the standard tray shift motor. - Replace the standard tray HP sensor. - Replace the standard tray clock sensor. - Replace the standard tray shift motor. - Replace the finisher controller PCB. |
| Error code: | E577 |
| Description: | There is a fault in stack processing (counterclockwise direction). Finisher-M1 The stack processing motor (M2) or the return controller home position sensor (S3) is faulty. The connector is disconnected. The stack delivery lever or the return roller is faulty. The return roller fails to reach the return roller home position sensor when the stack processing motor has been driven for a required period of time. |
| Causes: | The delivery motor (M1) on the finisher controller PCB is faulty. The return roller home position sensor (S3) is faulty. The connector is discontented or has an open circuit. The delivery motor relay harness is faulty. The return roller is faulty. The finisher controller PCB is faulty. |
| Remedy: | 1) Delivery motor (drive mechanism) Is the return roller rotation when the motor is rotating CCW? NO : Correcting the drive mechanism. Is the return roller displaced? NO : Correct the return roller spring. Is the tension of the delivery motor drive belt appropriate? NO : Loosen the screw, and correct the tension. 2) Return roller home position sensor (S3) Check the return roller home position sensor (S3). Is the sensor normal? NO : Replace the sensor. 3) Delivery motor (M1), Finisher controller PCB Try replacing the delivery motor (M1). Is the fault corrected? YES : End. NO : Replace the finisher controller PCB. |
| Error code: | E580 |
| Description: | Paper stopping at reverse section: The trailing edge of paper does not pass the reverse sensor-1 or reverse sensor-2 after its leading edge has reached the reverse sensor-1 or reverse sensor-2. |
| Causes: | Reverse sensor Reverse motor Bridge unit transport exit motor DFV board PFC board Rollers |
| Remedy: | Is there any paper at the reverse section when the exit cover is opened? → NO → YES Is the reverse sensor- 1/2 working? (Perform the input check in the test mode: 03-[FAX]OFF/[7]/[D], [7]/[E]) ↓ → NO → 1. Check if the connector of the reverse sensor 1/2 is not disconnected. 2. Check if the connector CN335 on the LGC board is not disconnected. 3. Check if the connector pins are not disconnected and the harness is not open circuited. 4. Check if the conductor pattern on the LGC board is not short- or open-circuited. 5. Replace the reverse sensor- 1/2. 6. Replace the LGC board. YES 1. Check if the setting of the paper size is correct. 2. Check the condition of the roller at the reverse section and clean or replace it. 3. Check if there is no mechanical loading at the follower roller and no abnormality at the myler. 4. Check if the adjustment of the reverse motor speed (05-453/454/456) is appropriate. 5. Replace the reverse sensor-2 if it is drastically damaged. |
| Error code: | E584-0001 |
| Description: | - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure - The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, resulting in incomplete open operation |
| Causes: | The feed motor (M1) is faulty. The shutter closed detecting switch (MS4) is faulty.PI20 |
| Remedy: | - Check the connector of the shutter open sensor. - Check the connector of the shutter clutch. - Check the connector of the shutter motor. - Replace the shutter open sensor. - Replace the shutter clutch. - Replace the shutter drive motor. - Replace the finisher controller PCB. |
| Error code: | E584-0002 |
| Description: | - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure - The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operation, resulting in incomplete close operation. |
| Causes: | The feed motor (M1) is faulty. The shutter open sensor (PI5) is faulty. |
| Remedy: | - Check the connector of the shutter open sensor. - Check the connector of the shutter clutch. - Check the connector of the shutter motor. - Replace the shutter open sensor. - Replace the shutter clutch. - Replace the shutter drive motor. - Replace the finisher controller PCB. |
| Error code: | E584-0003 |
| Description: | There is a fault in feed operation (No. 2). Finisher-N1/Saddle Finisher-N2 The safety area detecting switch (MS3) or the shutter closed switch (MS4) is faulty. The shutter closed switch is OFF when the tray 1/2 is in the OFF position of the safety area switch while the tray ascent/ descent motor is in operation. |
| Causes: | The safety area switch (MS3) is faulty. The shutter closed detecting sensor (MS4) is faulty. |
| Error code: | E5F0-0001 |
| Description: | There is an error in saddle paper positioning. The paper positioning plate home position sensor does not turn on when the paper positioning plate motor has been driven for 1.33 sec. The paper positioning plate motor (M4S) or the paper positioning plate home position sensor (PI7S) is faulty. |
| Causes: | The positioning plate motor (M4S) is faulty. The power positioning plate home position sensor (PI7S) is faulty. |
| Remedy: | Check the paper positioning plate motor (M4S) /paper positioning plate home position sensor (PI7S). |
| Error code: | E5F0-0002 |
| Description: | There is an error in saddle paper positioning. The paper positioning plate home position sensor does not turn off when the paper positioning plate motor has been driven for 1 sec. The paper positioning plate motor (M4S) or the paper positioning plate home position sensor (PI7S) is faulty. |
| Causes: | The positioning plate motor (M4S) is faulty. The power positioning plate home position sensor (PI7S) is faulty. |
| Remedy: | Check the paper positioning plate motor (M4S) /paper positioning plate home position sensor (PI7S). |
| Error code: | E5F1-0001 |
| Description: | There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty. |
| Causes: | The folding motor (M2S) is faulty. The folding motor clock sensor (PI4S) is faulty. |
| Remedy: | Check the paper folding motor (M2S) /paper folding motor clock sensor (PI4S). |
| Error code: | E5F1-0002 |
| Description: | There is an error in saddle paper folding. The state of the paper folding home position sensor does not change when the paper folding motor has been driven for 3 sec. The paper folding motor (M2S) or the paper folding motor clock sensor (P14S) is faulty. |
| Causes: | The folding roller home position sensor (PI12) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI14) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Check the paper folding motor (M2S) /paper folding motor clock sensor (PI4S). |
| Error code: | E5F2-0001 |
| Description: | There is an error in the saddle guide. The guide home position sensor does not turn on when the guide motor has been driven for 0.45 sec. The guide motor (M3S) or the guide home position sensor (PI3S) is faulty. |
| Causes: | The guide motor (M3S) is faulty. The guide home position sensor (PI13S) is faulty. |
| Remedy: | Check the guide motor (M3S) /guide home position sensor (PI13S). |
| Error code: | E5F2-0002 |
| Description: | There is an error in the saddle guide. The guide home position sensor doest not turn off when the guide motor has been driven for 1 sec. The guide motor (M3S) or the guide home position sensor (PI3S) is faulty. |
| Causes: | The guide motor (M3S) is faulty. The guide home position sensor (PI13S) is faulty. |
| Remedy: | Check the guide motor (M3S) /guide home position sensor (PI13S). |
| Error code: | E5F3-0001 |
| Description: | There is an error in saddle alignment. The aligning plate home position sensors does not turn on when the alignment motor has been driven for 05. sec (during initialization, 1.67 sec). The alignment motor (M5S) or the aligning plate home position sensor (PI5S) is faulty. |
| Causes: | The alignment motor (M5S) is faulty. The alignment plate home position sensor (PI5S) is faulty. |
| Remedy: | Check the alignment motor (M5S) /aligning plate home position sensor (PI5S). |
| Error code: | E5F3-0002 |
| Description: | There is an error in saddle alignment. The alignment plate home position sensor does not turn off when the alignment motor has been driven for 1 sec. The alignment motor (M5S) for the alignment plate home position sensor (PI5S) is faulty. |
| Causes: | The alignment motor (M5S) is faulty. The alignment plate home position sensor (PI5S) is faulty. |
| Remedy: | Check the alignment motor (M5S) /aligning plate home position sensor (PI5S). |
| Error code: | E5F4-0001 |
| Description: | There is an error in saddle rear sampling. The stitching home position sensor does not turn on when the stapler motor (rear) is rotated in reverse for 0.5 sec or more. The switch motor (rear, M65) or the stitching home position sensor (rear, MS5S) is faulty. |
| Causes: | The stitch motor (rear, M6S) is faulty. The stitching home position switch (rear, PS2S) is faulty. |
| Remedy: | Check he stitching motor (rear; M6S) /stitching home position sensor (rear; MS5S) |
| Error code: | E5F4-0002 |
| Description: | There is an error in saddle rear sampling. The stitching home position sensor does not turn off when the switch motor (rear) is reverse for 0.5 sec or more. The switch motor (rear, M6S) or the stitching home position sensor (rear, MS5S) is faulty. |
| Causes: | The stitch motor (rear, M6S) is faulty. The stitching home position switch (rear, PS2S) is faulty. |
| Remedy: | Check he stitching motor (rear; M6S) /stitching home position sensor (rear; MS5S). |
| Error code: | E5F5-0001 |
| Description: | There is an error in saddle front stapling. The stitching home position sensor does not turn on when the switch motor (front) is rotated in reverse for 0.5 sec or more. The stitch motor (front, M7S) or the stitching home position sensor (front, MS7S) is faulty. |
| Causes: | The stitching motor (front, M7S) is faulty. The stitching motor operating home position switch (front, PS4S) is faulty. |
| Remedy: | Check the stitching motor (front; M7S) /stitching home position sensor (front; MS7S). |
| Error code: | E5F5-0002 |
| Description: | There is an error in saddle front stapling. The stitching home position sensor does not turn off when the switch motor (front) is rotated in normal direction for 0.5. The stitch motor (front, M7S) or the switching home position sensor (front, MS7S) is faulty. |
| Causes: | The stitching motor (front, M7S) is faulty. The stitching motor operating home position switch (front, PS4S) is faulty. |
| Remedy: | Check the stitching motor (front; M7S) /stitching home position sensor (front; MS7S). |
| Error code: | E5F6-0001 |
| Description: | There is a fault in stapling by the saddle paper pushing plate. Saddle Unit The paper pushing plate motor (M8S) or the paper pushing plate home position sensor (PI4S) is faulty. The paper pushing plate home position sensor does not go ON when the paper pushing plate motor has been driven for 0.3 sec or more. |
| Causes: | The paper push-on plate motor (M8S) is faulty. The paper push-on plate home position sensor (PI14S) is faulty. |
| Remedy: | Replace the paper pressure plate motor (M8S), Replace the paper pressure plate HP sensor (PI14S) |
| Error code: | E5F6-0002 |
| Description: | There is a fault in stapling by the saddle paper pushing plate. Saddle Unit The paper pushing plate motor (M8S) or the paper pushing plate home position sensor (PI14S) is faulty. The paper pushing plate home position sensor does not go OFF when the paper pushing plate motor has been driven for 80 msec. |
| Causes: | The paper push-on plate motor (M8S) is faulty. The paper push-on plate leading edge position sensor (PI15S) is faulty. |
| Remedy: | Replace the paper pressure plate motor (M8S), Replace the paper pressure plate HP sensor (PI14S) |
| Error code: | E5F6-0003 |
| Description: | There is a fault in stapling by the saddle paper pushing plate. Saddle Unit The paper pushing plate motor (M8S) or the paper pushing plate leading edge position sensor (PI15S) is faulty. The paper pushing plate leading edge position sensor does not go OFF when the paper pushing plate motor has been driven for 80 msec. |
| Causes: | The paper push-on plate motor (M8S) is faulty. The paper push-on plate leading edge position sensor (PI15S) is faulty. |
| Remedy: | Replace the paper pressure plate motor (M8S), Replace the paper pressure plate motor clock sensor (PI1S) |
| Error code: | E5F6-0004 |
| Description: | There is a fault in stapling by the saddle paper pushing plate. Saddle Unit The paper pushing plate motor (M8S) or the paper pushing plate motor clock sensor (PI1S) is faulty. The number of detection pulses of the paper pushing plate motor clock sensor has dropped below a specific value. |
| Causes: | The paper push-on plate motor (M8S) is faulty. The paper push-on plate motor clock sensor (PIS) is faulty |
| Remedy: | Replace the paper pressure plate motor (M8S), Replace the paper pressure plate leading edge sensor (PI15S) |
| Error code: | E5F6-0005 |
| Description: | There is a fault in stapling by the saddle paper pushing plate. Saddle Unit The paper pushing plate motor (M8S) or the paper pushing plate leading edge position sensor (PI15S) is faulty. The paper pushing plate leading edge positioning sensor does not go ON when the paper pushing plate motor has been driven for 0.3 sec or more. |
| Causes: | The paper push-on plate motor (M8S) is faulty. The paper push-on leading edge position sensor (PI15S) is faulty. |
| Remedy: | Replace the paper pressure plate motor (M8S), Replace the paper pressure plate leading edge sensor (PI15S) |
| Error code: | E5F8-0001 |
| Description: | There is an error in the saddle connector. The connector of the guide home position sensor is identified as being disconnected. The connector of the guide home position sensor (PI3S) is faulty. |
| Causes: | The guide home position sensor (PI13S) has a faulty connector. |
| Remedy: | Check the connectors of the guide home position sensor (PI13S). Check the connectors of the paper pushing plate home position sensor (PI4S). |
| Error code: | E5F8-0002 |
| Description: | There is an error in the saddle connector. The connector of the paper pushing plate home position sensor is identified as being disconnected. The connector of the paper pushing plate home position sensor (PI14S) is faulty. |
| Causes: | The paper push-on plate home position sensor (PI14) has a faulty connector. |
| Remedy: | Check the connectors of the paper pushing plate leading edge position sensor (PI5S). |
| Error code: | E5F8-0003 |
| Description: | There is an error in the saddle connector. The connector of the paper pushing plate leading edge position sensor is identified as being disconnected. The connector of the paper pushing plate leading edge sensor (PI15S) is faulty. |
| Causes: | The paper push-on plate leading edge sensor (PI15S) has a faulty connector. |
| Remedy: | Check the connectors of the paper pushing plate leading edge position sensor (PI5S). |
| Error code: | E5F9-0001 |
| Description: | There is an error in the saddle switch. With any of the following sensor is identifying its respective cover a being closed, the inlet cover switch is identified as being open for 1 sec or more after the start of the initial rotation of the machine or the start of printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S) Or, the front cover switch (MS2S) or the delivery cover switch (MS3S) is open. The inlet cover switch (MS1S), front cover switch (MS2S), or delivery cover switch (MS3S) is faulty. |
| Causes: | The inlet door open detecting switch (MS1S) is faulty. The inlet door sensor (PI9S) is faulty. |
| Remedy: | Check the inlet cover switch (MS1S)/front cover switch (MS2S)/delivery cover switch (MS3S). |
| Error code: | E5F9-0002 |
| Description: | There is an error in the saddle switch. With any of the following sensor is identifying its respective cover as being closed, the front cove switch is identified as being open for 1 sec or more after the start of the initial rotation of the machine or the start of printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cove sensor (PI3S) The front cove switch (MS2S) or the delivery cover switch (MS3S) is faulty. |
| Causes: | The front door open detecting switch (MS2S) is faulty. The front door open sensor (PS2S) is faulty. |
| Remedy: | Check the front cover switch (MS2S)/delivery cover switch (MS3S). |
| Error code: | E5F9-0003 |
| Description: | There is an error in the saddle switch. With any of the following sensors identifying its respective cover as being closed, the delivery cover switch is identified as being open for 1 sec or more after the start of the initial rotation of the machine or the start of printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S) - delivery cover switch (MS3S) |
| Causes: | The delivery door open detecting switch (MS3S) is faulty. The delivery door open sensor (PI3S) is faulty. |
| Remedy: | Check the delivery cover switch (MS3S). |
| Error code: | E602-0001 |
| Description: | HDD error |
| Causes: | Lack of the HDD capacity The capacity of the HDD installed is smaller than that of the HDD used in the software. |
| Error code: | E602-0002 |
| Description: | HDD error |
| Causes: | Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged. |
| Remedy: | Burn the Bootable CD again. |
| Error code: | E602-0003 |
| Description: | HDD error |
| Causes: | HDD access error An error occurred caused by the device or hardware when accessing to the HDD during execution of bootrom. (Damage to the sector / Busy device status, etc.) |
| Remedy: | Turn on the power again. |
| Error code: | E602-0005 |
| Description: | The hard disk is faulty. It is a fault in the detection of the HD controller IC. It is detected when the HD controller IC cannot be recognized or an error is detected in it. |
| Error code: | E602-0006 |
| Description: | HDD error |
| Causes: | SubBootable load failure A SubBootable CD was not contained. A SubBootable CD was damaged. |
| Remedy: | Burn the SubBootable CD again. |
| Error code: | E602-0007 |
| Description: | HDD error |
| Causes: | The contents (ICC-Profile, etc.) could not be detected. (The contents were not contained. The contents were damaged, etc.) |
| Remedy: | Burn the Bootable CD again. |
| Error code: | E604-0000 |
| Description: | Memory error |
| Causes: | Lack of memory capacity |
| Remedy: | Check the memory capacity inserted to each slot. |
| Error code: | E605 |
| Description: | EEPROM error (optical unit). When the printer is not put in a ready status if the predetermined time has elapsed after execution of access control to the EEPROM of the P/H Assy at power-on. |
| Causes: | • P/H Assy • Control Board (PWB-A) |
| Remedy: | 1 Check the P/H Assy connector connection status, and correct if it is improper. 2 Replace the P/H Assy. 3 Replace the PWB-A. |
| Error code: | E606-0001 |
| Description: | The hard disk is faulty. A HD mounting error is detected when the HD is booted from BOOT ROM. |
| Causes: | The HDD is faulty. The main controller PCB is faulty. |
| Remedy: | 1. Wiring Are the connection and cable normal between the connector J1025 on the main controller PCB and the connector J2005 of the HDD? NO: Correct the connection and the cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD and downloading the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E606-0002 |
| Description: | The hard disk is faulty. A reading error is detected when the HD is booted from BOOTROM. |
| Error code: | E674-0000 |
| Description: | The fax board is faulty. |
| Causes: | The wiring is faulty (short circuit, open circuit). The fax PCB is faulty. The main controller PCB is faulty. |
| Remedy: | 1. Wiring Are the connection and the cable between the connector J 1005 on the main controller PCB and the connector J31 on the FAX PCB normal? NO: Correct the connection and the cable. 2. FAX PCB, Main controller PCB Try replacing the FAX PCB. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E711-0001 |
| Description: | IPC communication error When error occurrence was set 4 or more times in the error register of the IPC chip within 1.5 sec. |
| Causes: | The connector has poor connection. The ADF controller PCB is faulty. The finisher controller PCB is faulty. The DA unit PCB is faulty. The card reader PCB is faulty. |
| Remedy: | Check the cable connections. Replace the ADF controller PCB. Replace the reader controller PCB. |
| Error code: | E711-0002 |
| Description: | There is an IPC communication error. An error has been detected 4 times or more within 1.5 sec after the communication has been interrupted between the finisher and the printer, and the machine does not reset. |
| Causes: | The connector has poor connection. The ADF controller PCB is faulty. The finisher controller PCB is faulty. The DA unit PCB is faulty. The card reader PCB is faulty. |
| Remedy: | Turn off the main power, and check the cable; then, turn on the main power. If the machine fails to reset, check the connector between the finisher and the copier for poor contact; as necessary, replace the finisher controller/DC controller. |
| Error code: | E712 |
| Description: | Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor. |
| Causes: | Original registration sensor Original pickup solenoid RADF board Perform the 05-3210 Roller Pickup roller, feed roller, separation roller |
| Remedy: | 1. Clean the pickup roller, feed roller and separation roller if they are stained. 2. Flatten the original if it is folded or excessively curled and place it again. 3. Is the original registration sensor working? (Perform the input check: 03-[FAX]ON/[7]/[H]) * If it is working properly, proceed to 7. If not, check 3 to 6. 4. Check if the connector CN74 on the RADF board is disconnected from the original registration sensor or the harnesses are open circuited. Correct if any. 5. Replace the original registration sensor. 6. Replace the RADF board, and then perform the automatic adjustment for the original reading start sensor (05-356). 7. Replace the pickup roller, feed roller and separation roller if they are worn out. |
| Error code: | E713 |
| Description: | Original stopping at original length detection sensor: The trailing edge of the original does not pass the original length detection sensor after its leading edge has reached the original length detection sensor. |
| Remedy: | Are the registration roller, read roller and exit roller stained? ↓ YES Clean the rollers |
| Error code: | E716 |
| Description: | Tray lowering movement time-out: The lifting tray does not reach the lifting tray lower limit detection sensor. |
| Remedy: | Is there any foreign matter which interrupts lifting or lowering the tray? ↓ YES → Remove the foreign matter. NO Is the connector of the tray lift motor or the connector CN5 on the ADF board disconnected? ↓ YES → Reconnect the connector. NO Is the harness connecting the ADF board and tray lift motor open circuited? ↓ YES → Replace the harness. NO Is the connector CN12 or CN15 on the ADF board disconnected? ↓ YES → Reconnect the connector. NO Are the harnesses connecting the ADF board and the lifting tray upper limit detection sensor or the lifting tray lower limit detection sensor open circuited? ↓ YES → Replace the harness. NO Replace the ADF board. |
| Error code: | E717-0000 |
| Description: | The communication with the NE controller is faulty. The communication with the NE controller is disrupted and is not resumed within 3 sec thereafter. |
| Error code: | E719-0000 |
| Description: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Causes: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Remedy: | - Check the connectors of the card reader and image processor PCB. - Replace the card reader for normal connection. - Replace the image processor PCB. |
| Error code: | E731 |
| Description: | Stop jam at the original exit sensor: The trailing edge of the original does not pass the original exit sensor after its leading edge has reached this sensor |
| Causes: | Original exit sensor RADF board Perform the 05-3210 Roller Exit roller |
| Remedy: | 1. Clean the exit roller and the exit intermediate roller if they are stained. 2. Is the original exit sensor working? (Perform the input check: 03-[FAX]ON/[7]/[E]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN75 on the RADF board is disconnected from the original exit sensor or the harnesses are open circuited. Correct if any. 4. Replace the original exit sensor. 5. Replace the RADF board, and then perform the automatic adjustment for the original reading start sensor (05-356). 6. Replace the exit roller and the exit intermediate roller if they are worn out. |
| Error code: | E732-0000 |
| Description: | Scanner communication error. |
| Causes: | Scanner communication error |
| Remedy: | 1. Install the set of the controller firmware. 2.Replace the Main Controller PCB (UN30). |
| Error code: | E733-0000 |
| Description: | Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
| Causes: | Printer communication error (communication error at initial communication and negotiation packet error) |
| Remedy: | - Check the connectors of the DC controller PCB and image processor PCB for normal connection. - Check the power supply of the printer (Check whether initialization is performed at startup). - Replace the DC controller PCB or image processor PCB. |
| Error code: | E733-0001 |
| Description: | Printer communication error (Invalid communication after communication is established, Parity error) |
| Remedy: | Turn on the power again. Replace the DC controller PCB. |
| Error code: | E740-0002 |
| Description: | Error detection on either Network Board or Mac address |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of the network cable. (2) Replace the Main Controller Board. |
| Error code: | E744 |
| Description: | Stop jam at the original exit/reverse sensor |
| Causes: | Original exit/reverse sensor RADF board Perform the 05-3210 Roller Intermediate transport roller |
| Remedy: | 1. Clean the exit/reverse intermediate roller if it is stained. 2. Is the original exit/reverse sensor working? (Perform input check: 03: [FAX]/ON/[5]/[B]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN75 on the RADF board is disconnected from the original exit/reverse sensor or the harnesses are open-circuited. Correct if this is the case. 4. Replace the original exit/reverse sensor. 5. Replace the RADF board, and then perform the automatic adjustment for the original reading start sensor (05-356). 6. Replace the exit/reverse intermediate roller, if it is worn out. |
| Error code: | E745 |
| Description: | Jam not reaching the original exit/reverse sensor |
| Causes: | Original exit reverse sensor RADF board Perform the 05-3210 Roller |
| Remedy: | 1. Clean the exit intermediate roller if it is stained. 2. Is the original exit/reverse sensor working? (Perform input check: 03: [FAX]/ON/[5]/[B]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN75 on the RADF board is disconnected from the original exit/reverse sensor or the harnesses are open-circuited. Correct if this is the case. 4. Replace the original exit/reverse sensor. 5. Replace the RADF board, and then perform the automatic adjustment for the original reading start sensor (05-356). 6. Replace the exit intermediate roller, if it is worn out. |
| Error code: | E747 |
| Display: | E747 |
| Description: | Optical Fan Motor error. When the lock signal is detected continuously for the predetermined time during fan rotation. |
| Causes: | • Fuser Fan Motor (M7) • PH Fan Motor (M8) • Suction Fan Motor (M13) • Ozone Fan Motor (M9) • PS Fan Motor (M6) • PU Fan Motor (M12) |
| Remedy: | 1 Check the motor connector connection status, and correct if it is improper. 2 Check the load status of the fan section, and correct if it is improper. 3 Check the operation of M8. p115 PWB-A CNF2-A-1(REM) 5-G 4 Replace the PWB-A. |
| Error code: | E804-0000 |
| Description: | Power supply fan failure |
| Error code: | E804-0004 |
| Description: | Controller Fan error Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time. |
| Causes: | Power supply cooling fan does not rotate in the specified rotation speed. Cause: Problem in power supply cooling fan / DC controller PCB |
| Remedy: | 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan. |
| Error code: | E805-0000 |
| Description: | Fan failure The fan is faulty. |
| Causes: | Fixing fan error Cause The fixing fan is faulty. The engine controller PCB is faulty. |
| Remedy: | - Check the fan connector. - Replace the fan. - Replace the DC controller PCB. |
| Error code: | E805-0001 |
| Description: | Error in duplex cooling fan |
| Causes: | Fan 1 failure |
