Canon Satera LBP6240
Рейтинг
Модули
100 EXTERNAL COVERS, PANEL, ETC.
101 INTERNAL COMPONENTS 1
102 INTERNAL COMPONENTS 2
102 INTERNAL COMPONENTS 3
Детали
Деталь: | PLATE, NAME |
Парткод: | FC5-4822-000 |
Деталь: | EMBLEM, LASER SHOT |
Парткод: | FC9-9602-000 |
Деталь: | LABEL, GROUNDING CAUTION |
Парткод: | FC9-5369-000 |
Деталь: | COVER, FRONT |
Парткод: | FC9-9575-000 |
Деталь: | COVER, FRONT |
Парткод: | FE3-5706-000 |
Деталь: | CARTRIDGE DOOR ASSY |
Парткод: | FM4-5811-000 |
Деталь: | CARTRIDGE DOOR ASSY |
Парткод: | FM1-D610-000 |
Деталь: | TOP COVER ASSEMBLY |
Парткод: | FM4-5812-000 |
Деталь: | TOP COVER ASSEMBLY |
Парткод: | FM1-D609-000 |
Деталь: | LEFT COVER ASSY |
Парткод: | FM4-5813-000 |
Деталь: | LEFT COVER ASSY |
Парткод: | FM1-D611-000 |
Деталь: | LEFT COVER ASSY |
Парткод: | FM1-D612-000 |
Деталь: | RIGHT COVER ASSY |
Парткод: | FM4-5814-000 |
Деталь: | RIGHT COVER ASSY |
Парткод: | FM1-D613-000 |
Деталь: | DUST COVER ASSY |
Парткод: | FM4-5815-000 |
Деталь: | PAPER PICK-UP TRAY ASSY |
Парткод: | FM4-5816-000 |
Деталь: | PAPER PICK-UP TRAY ASSY |
Парткод: | FM1-D636-000 |
Деталь: | PAPER PICK-UP TRAY ASSY |
Парткод: | FM1-D638-000 |
Деталь: | PAPER PICK-UP TRAY ASSY |
Парткод: | FM4-5870-000 |
Деталь: | PAPER PICK-UP TRAY ASSY |
Парткод: | FM4-5871-000 |
Деталь: | PAPER PICK-UP TRAY ASSY |
Парткод: | FM1-D641-000 |
Деталь: | DUPLEXING DOOR ASSY |
Парткод: | FM4-5865-000 |
Деталь: | DUPLEXING DOOR ASSY |
Парткод: | FM1-D614-000 |
Деталь: | SCREW, TP, M3X6 |
Парткод: | XA9-1418-000 |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1834-000 |
Деталь: | PLATE, CARD END |
Парткод: | FC9-9600-000 |
Деталь: | BUTTON, RELEASE |
Парткод: | FE3-5700-000 |
Деталь: | BUTTON, PAPER PICK-UP |
Парткод: | FE3-5701-000 |
Деталь: | MODULE, W LAN |
Парткод: | FK4-1248-000 |
Деталь: | PANEL UPEER RELEASE PCB ASSY |
Парткод: | FM1-G875-000 |
Деталь: | LED FRONT PCB ASSEMBLY |
Парткод: | FM1-G876-000 |
Деталь: | EXTERNAL COVERS, PANELS, ETC. |
Парткод: | NPN |
Деталь: | FIXING ASSY (220-240V) |
Парткод: | FM4-5869-000 |
Деталь: | FIXING ASSY (220-240V) |
Парткод: | FM1-D615-000 |
Деталь: | FIXING ASSY (220-240V) |
Парткод: | RM1-7546-000 |
Деталь: | FIXING ASSY (220-240V) |
Парткод: | FM1-D616-000 |
Деталь: | FIXING ASSY (220-240V) |
Парткод: | RM1-7547-010 |
Деталь: | ENGINE CONTROL PCB ASSY |
Парткод: | FM4-7041-000 |
Деталь: | ENGINE CONTROL PCB ASSY |
Парткод: | FM1-F910-000 |
Деталь: | ENGINE CONTROL PCB ASSY |
Парткод: | FM4-7042-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM4-7182-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM4-7183-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM4-7184-010 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM1-G878-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM1-G877-000 |
Деталь: | DELIVERY SENSOR PCB ASSY |
Парткод: | RM1-7440-000 |
Деталь: | DELIVERY SENSOR PCB ASSY |
Парткод: | FM1-F912-000 |
Деталь: | FIXING FILM ASSY |
Парткод: | FM4-6984-000 |
Деталь: | FIXING FILM ASSY |
Парткод: | RM1-7541-010 |
Деталь: | FIXING FILM ASSY |
Парткод: | RM1-7542-010 |
Деталь: | LINK, PRESSURE RELEASE |
Парткод: | RC2-9512-000 |
Деталь: | SWITCH LEVER ASSY |
Парткод: | RM1-7531-010 |
Деталь: | ROLLER, PRESSURE |
Парткод: | RC2-9208-000 |
Цена: | 3 300 ₽ |
Деталь: | SCREW, W/WASHER, M3X8 |
Парткод: | XA9-1420-000 |
Цена: | 1 100 ₽ |
Деталь: | SCREW, TP, M3X6 |
Парткод: | XA9-1418-000 |
Деталь: | SCREW, D, M3X6 |
Парткод: | XA9-1670-000 |
Деталь: | SPACER, RING |
Парткод: | RC2-9214-000 |
Деталь: | ROLLER HOLDER ASSEMBLY |
Парткод: | RM1-7524-000 |
Деталь: | INTERNAL COMPONENTS 1 |
Парткод: | NPN |
Деталь: | PAPER PICK-UP ASSY |
Парткод: | FM4-5866-000 |
Деталь: | PAPER PICK-UP ASSY |
Парткод: | FM1-D618-000 |
Деталь: | ROLLER, TRANSFER |
Парткод: | RM1-4023-000 |
Деталь: | SEPARATION PAD ASSY |
Парткод: | RM1-4227-000 |
Деталь: | SCREW, D, M3X6 |
Парткод: | XA9-1670-000 |
Деталь: | ROLLER, PICK-UP |
Парткод: | RL1-1497-000 |
Деталь: | DUPLEXING FRAME ASSY |
Парткод: | RM1-7525-000 |
Деталь: | PAPER PICK-UP SENSOR PCB ASSY |
Парткод: | FM4-7044-000 |
Деталь: | PAPER PICK-UP SENSOR PCB ASSY |
Парткод: | FM1-F913-000 |
Деталь: | INTERNAL COMPONENTS 2 |
Парткод: | NPN |
Деталь: | LASER SCANNER ASSY |
Парткод: | RM1-7560-000 |
Деталь: | MOTOR PCB ASSY |
Парткод: | FM4-7045-000 |
Деталь: | MOTOR PCB ASSY |
Парткод: | FM1-F914-000 |
Деталь: | CABLE, FLAT |
Парткод: | RM1-7739-000 |
Деталь: | MOTOR, DC24V |
Парткод: | RM1-7544-000 |
Деталь: | DUPLEXING PCB ASSY |
Парткод: | RM1-7620-000 |
Деталь: | SOLENOID |
Парткод: | RK2-0420-000 |
Деталь: | FAN |
Парткод: | RK2-3438-000 |
Деталь: | LINK, CARTRIDGE DOOR |
Парткод: | RC2-9425-000 |
Деталь: | SCREW, TP, M3X6 |
Парткод: | XA9-1418-000 |
Деталь: | SCREW, D, M3X6 |
Парткод: | XA9-1670-000 |
Деталь: | SCREW, D, M3X10 |
Парткод: | XA9-1832-000 |
Деталь: | GEAR, 85T |
Парткод: | RU6-0016-000 |
Цена: | 280 ₽ |
Деталь: | INTERNAL COMPONENTS 3 |
Парткод: | NPN |
Коды ошибок
E000-0000
E001-0000
E003-0000
E004-0000
E100-0000
E196-0000
E196-2000
E733-0000
E733-0001
E733-0004
E733-0005
E733-0006
E733-0007
E743-0000
E744-4000
E744-6000
E805-0000
Описание
Error code: | E000-0000 |
Description: | Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
Causes: | The detection temperature of the main thermistor did not increase after start of the power distribution to the heater. |
Remedy: | - Check the fixing film connector. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E001-0000 |
Description: | Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
Causes: | The main thermistor detected a temperature of higher than 255 degree C. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E003-0000 |
Description: | Abnormally low temperature (detected by main thermistor) After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
Causes: | The main thermistor detected a temperature of lower than 120 degree C for more than 1 second when 20 seconds elapsed after start of the power distribution to the heater. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E004-0000 |
Description: | Fixing power supply drive circuit error |
Causes: | 43 to 57Hz could not be detected continuously for more than 5 seconds when zero cross detection started. |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the DC Controller Board. (2) Replace the Fixing Assembly. |
Error code: | E100-0000 |
Description: | BD detection PCB failure The BD detection PCB is faulty. |
Causes: | Yellow optical assembly failure |
Remedy: | - Check the connector of the BD detection PCB. - Replace the laser scanner unit. - Replace the DC controller PCB. |
Error code: | E196-0000 |
Description: | Invalid RFU execution requested |
Causes: | D-con update for the host machine or the optional cassette is not completed. |
Error code: | E196-2000 |
Description: | ROM read/write error (Error in storing each setting values for user mode / service mode / factory mode) |
Causes: | Error in writing in/reading from ROM (storing settings) Cause: Problem in main controller PCB |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Update the set of the Controller Firmware (2) Replace the Main Controller Board. |
Error code: | E733-0000 |
Description: | Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
Causes: | Printer communication error (communication error at initial communication and negotiation packet error) |
Remedy: | - Check the connectors of the DC controller PCB and image processor PCB for normal connection. - Check the power supply of the printer (Check whether initialization is performed at startup). - Replace the DC controller PCB or image processor PCB. |
Error code: | E733-0001 |
Description: | Printer communication error (Invalid communication after communication is established, Parity error) |
Remedy: | Turn on the power again. Replace the DC controller PCB. |
Error code: | E733-0004 |
Description: | Printer communication error (Undefined command error) |
Remedy: | Turn on the power again. Replace the DC controller PCB. |
Error code: | E733-0005 |
Description: | Printer communication error (Communication timeout error) |
Remedy: | Turn on the power again. Replace the DC controller PCB. |
Error code: | E733-0006 |
Description: | Printer communication error (Unknown communication error) |
Remedy: | Turn on the power again. Replace the DC controller PCB. |
Error code: | E733-0007 |
Description: | Printer communication error ?Communication error between the Engine Controller PCB and the Main Controller PCB occurred. |
Remedy: | 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. 3. Replace the Engine Controller PCB. |
Error code: | E743-0000 |
Description: | Error in main controller communication An error in reading of/writing to the Flash ROM in the Main Controller occurred. |
Causes: | Software sequence error |
Remedy: | 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. |
Error code: | E744-4000 |
Description: | Engine ID error (Invalid engine connection is detected) |
Causes: | Error in engine ID Detected illegal engine connection |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the DC Controller Board. (2) Update the Engine Firmware. (3) Update the set of the Controller Firmware |
Error code: | E744-6000 |
Description: | Communication error with Wireless LAN board. |
Causes: | Communication with the Wireless LAN PCB could not be established. |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Wireless LAN Board. (4) Replace the Main Controller Board. |
Error code: | E805-0000 |
Description: | Fan failure The fan is faulty. |
Causes: | Fixing fan error Cause The fixing fan is faulty. The engine controller PCB is faulty. |
Remedy: | - Check the fan connector. - Replace the fan. - Replace the DC controller PCB. |