HP Color LaserJet 4600

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

85000

Цветность печати

цветная

Общие характеристики
Копир
Макс. формат	A4
Цветность печати	цветная
Сканер
Печать фотографий
Число страниц в месяц	85 000
Технология печати	лазерная
Тип	лазерный/светодиодный
Область применения	средний офис
Тип устройства	Принтер
Принтер
Количество цветов	4
Двусторонняя печать
Прямая печать
Макс, разрешение для ч/б печати
По X	600
По Y	600
Расходные материалы
Ресурс цветного картриджа/тонера	8 000
Ресурс ч/б картриджа/тонера	9 000
Печать на:
Фотобумаге
Пленках
Этикетках
Языки управления
PostScript
Лотки
Подача бумаги
Стандартная	600
Вывод бумаги
Стандартный	250
Интерфейсы
Инфракрасный порт
USB
Ethernet (RJ-45)
LPT
Память/Процессор
Объем памяти	96
Макс, объем памяти	416
Дополнительная информация
Мин. системные требования
Поддержка ОС
DOS
Windows
Mac OS
Linux
Уровень шума
При работе	51
Габариты
Глубина	548
Высота	578
Вес	40
Ширина	480

Модули

FRAME L

DUPLEX

CASSETTE ASSEMBLY

COVERS and LABELS

PAPER FEED

PANEL

(Электронные компоненты)

Детали DUPLEX

$canon\WG8-5849-000CN.jpg$

Деталь:	Датчик наличия бумаги
Парткод:	WG8-5849-000CN
Цена:	380 ₽

Деталь:	Pickup Roller
Парткод:	RF5-3739-000CN
Цена:	500 ₽

Деталь:	Площадка отделения бумаги из кассеты
Парткод:	RF5-3749-000CN
Цена:	700 ₽

$hp\RG1-4140-130CN.jpg$

Деталь:	Кассета на 500 листов, в сборе
Парткод:	RG1-4140-130CN
Цена:	25 800 ₽

Деталь:	Лоток ручной подачи бумаги, в сборе
Парткод:	RG5-6467-000CN
Цена:	4 000 ₽

$hp\RG5-6469-000CN.jpg$

Деталь:	Привод узла захвата бумаги из кассеты, в сборе
Парткод:	RG5-6469-000CN
Цена:	2 500 ₽

$hp\RG9-1529-000CN.jpg$

Деталь:	Ролик захвата бумаги из лотка ручной подачи
Парткод:	RG9-1529-000CN
Цена:	1 200 ₽

Коды ошибок

10.XX.YY

13.XX.YY

41.3

41.5

41.X

49.XXXX

50.X

51.XY

52.XY

53.10.05

53.X0.ZZ

53.XY.ZZ

54.X

55.X

57.X

58.X

59.XY

68.X

79.XXXX

8X.YYYY

Описание

Парткод

Название

НР 641A Тонер-картридж черный

НР 641AD Двойная упаковка картриджа C9720A

НР 641A Тонер-картридж голубой

НР 641A Тонер-картридж желтый

НР 641A Тонер-картридж пурпурный

(C9724A) HP Комплект переноса изображения

HP (C9726A) Комплект термического закрепления 220v

Error code:	10.XX.YY
Display:	10.XX.YY SUPPLY MEMORY ERROR
Description:	An error has occurred in one or more of the product`s supplies. Values of XX and YY are listed below: XX00 = memory is defective XX01 = memory is missing YY00 = cartridge
Remedy:	• Turn the product off and then on to clear the message. • Replace the print cartridge.

Error code:	13.XX.YY
Display:	13.XX.YY - Remove Tray 2 Clear jam then touch OK
Description:	Media is jammed in the duplex area.
Remedy:	Follow the instructions in the onscreen dialog box.

Error code:	20
Description:	Vertical image or label drift
Causes:	The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media.
Remedy:	Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation.

Error code:	22
Description:	Loss of printing registration on labels. Excessive vertical drift in top-of-form registration.
Causes:	The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly.
Remedy:	Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58.

Error code:	40
Display:	Scanner locked
Description:	10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run.
Causes:	1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors.
Remedy:	Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board.

Деталь:	MOUNT,CLAW,UPPER
Парткод:	C9726A
Цена:	18 500 ₽

Деталь:	Тероплёнка
Парткод:	RG5-6517-FILM
Цена:	8 000 ₽

Деталь:	Правый держатель кассеты
Парткод:	RG5-6460-000CN
Цена:	1 700 ₽

Деталь:	Узел переноса изображения, в сборе
Парткод:	Q3675A
Цена:	14 600 ₽

Деталь:	Блок лазера
Парткод:	RG5-6390-000CN
Цена:	6 200 ₽

Деталь:	Плата высоковольтного питания
Парткод:	RG5-6395-000CN
Цена:	16 700 ₽

Деталь:	Плата контроллера памяти
Парткод:	RG5-6396-000CN
Цена:	3 800 ₽

Деталь:	Samsung Xpress M2026
Парткод:	RG5-6411-020CN
Цена:	4 600 ₽

Деталь:	Вентилятор
Парткод:	RH7-1491-020CN
Цена:	2 100 ₽

Деталь:	Плата форматтера (для моделей без двухсторонней печати)
Парткод:	C9660-69011
Цена:	26 200 ₽

Error code:	41.3
Display:	41.3 UNEXPECTED SIZE IN TRAY <X>
Description:	You have configured the tray for a different size of paper than the print job requires. NOTE: This error can be caused by a multi feed problem. Open, and then close, the cartridge door to clear the error message. If the error persists, and the tray is correctly configured, try cleaning the Tray 1 pickup roller (or you might have to replace the roller).
Remedy:	1. Reload the tray with the correct paper size. 2. Make sure the paper size that is specified in the software program, the printer driver, and the control panel are all the same. 3. Press the OK button and scroll to the TRAY <X> SIZE = <Size> option. Reconfigure the size in a tray to match the size required for the print job. 4. If the error does not clear, turn the product off and then on. 5. If the message persists, contact an HPauthorized service or support provider.

Error code:	41.5
Display:	41.5 UNEXPECTED TYPE IN TRAY X
Description:	The device senses a different media type than what is configured in the tray.
Remedy:	1. Press "OK" to print from a different tray. 2. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again

Error code:	49.XXXX
Display:	49.XXXX ERROR
Description:	A critical firmware error has occurred that caused the processor on the formatter to cease operation. This error can be caused by invalid print commands, corrupt data, or invalid operations. In some cases, electrical “noise” in the cable can corrupt data during transmission to the product. Other causes can be poor-quality cables, poor connections, or home-grown programs. On rare occasions, the formatter is at fault.
Remedy:	1. Turn off the product, and then turn it on. 2. Press Stop to clear the print job from the product memory. 3. Turn off the product, and then turn it on. 4. Print a document from a different software program. If the job prints, return to the first program and try to print a different file. If the message appears only with a certain software program or print job, contact the software program vendor for assistance. 5. If the message persists with different software programs and print jobs, disconnect all of the cables to the product that connect it to the network or computer. 6. Turn off the product. 7. Remove all EIO devices from the product. 8. Turn on the product. 9. If the error no longer exists, replace each EIO device one at a time, making sure to turn the product off and on again as you install each device. 10. Replace an EIO device if you determine that it causes the error.

Error code:	50.X
Display:	50.X Fuser Error
Description:	The product has an internal hardware error.
Remedy:	1. Press the power button to turn the product off.2. If a surge protector is in use, remove it. Connect the power cord directly into a wall outlet.3. Wait at least 25 minutes, turn the product on, and then wait for the product to initialize.4. If the error persists, reconnect J101 and J552 on the engine controller PCA.5. If the error persists, check the power source. Make sure that the power source meets the minimum system requirements (40Hz to 70Hz).6. If the error persists, replace the fuser.7. If the error persists, replace the engine controller PCA.

Error code:	62
Display:	Nongenuine Toner Replace Toner
Description:	The toner cartridge installed is not a genuine cartridge.
Causes:	· Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board
Remedy:	This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge.

Error code:	64
Display:	Toner Exhausted Replace Toner 1
Description:	Cover Open
Causes:	The Printer Cover is open or Toner Cartridge not installed.