HP Color LaserJet Professional CP5225dn
Рейтинг
Актуальный
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
75000
Скорость печати
A4
20
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Число страниц в месяц |
75 000 |
Размещение |
настольный |
Печать фотографий |
|
Факс |
|
Сканер |
|
Копир |
|
Телефон |
|
Область применения |
средний офис |
Макс. формат |
A3 |
Цветность печати |
цветная |
Тип устройства |
Принтер |
Принтер |
|
Двусторонняя печать |
|
Печать без полей |
|
Система непрерывной подачи чернил |
|
Пигментные чернила |
|
Количество цветов |
4 |
Макс, разрешение для ч/б печати |
|
| По X | 600 |
| По Y | 600 |
Скорость ч/б печати |
|
| A4 | 20 |
Время выхода первого отпечатка |
|
| Цветн, | 17 |
Сканер |
|
Стандарт TWAIN |
|
Слайд-адаптер |
|
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Расходные материалы |
|
Ресурс цветного картриджа/тонера |
7 300 |
Ресурс ч/б картриджа/тонера |
7 000 |
Количество картриджей |
4 |
Печать на: |
|
| Конвертах |
|
| Матовой бумаге |
|
| Глянцевой бумаге |
|
| Этикетках |
|
| Пленках |
|
| Карточках |
|
| Рулоне |
|
| CD/DVD |
|
| Фотобумаге |
|
Плотность бумаги |
|
| Максимальная | 220 |
| Минимальная | 60 |
Факс |
|
Цветной |
|
Телефон |
|
Проводная трубка |
|
Беспроводная трубка |
|
АОН |
|
Caller ID |
|
Автоответчик |
|
Стандарт DECT |
|
Спикерфон |
|
Языки управления |
|
| PostScript |
|
| PostScript 3 |
|
| PCL 5c |
|
| PCL 6 |
|
| PostScript 2 |
|
| PPDS |
|
| PCL 5e |
|
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Максимальная | 850 |
| Стандартная | 350 |
Вывод бумаги |
|
| Стандартный | 250 |
Финишер |
|
Сортер |
|
Брошюровщик |
|
Степлер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Wi-Fi |
|
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
Инфракрасный порт |
|
RS-232 |
|
Bluetooth |
|
LPT |
|
Ethernet (RJ-45) |
|
USB |
|
Память/Процессор |
|
Частота процессора |
540 |
Макс, объем памяти |
448 |
Объем памяти |
192 |
Дополнительная информация |
|
Мин. системные требования |
Intel Pentium II |
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
| DOS |
|
| Windows |
|
| Linux |
|
| Mac OS |
|
Потребляемая мощность |
|
| В режиме ожидания | 4,4 |
| При работе | 440 |
Габариты |
|
Глубина |
599 |
Высота |
338 |
Ширина |
545 |
Вес |
40,9 |
Модули
Paper feeder PCA
PAPER DELIVERY ASSEMBLY
INTERNAL COMPONENTS 6
Paper feeder external components
Internal components (2 of 6)
INTERNAL COMPONENTS 4
Internal components (6 of 6)
PCAs
INTERNAL COMPONENTS 2
Right door assembly
INTERNAL COMPONENTS 5
CASSETTE
Internal components (4 of 6)
Internal components (5 of 6)
INTERNAL COMPONENTS 3
INTERNAL COMPONENTS 1
Internal components (1 of 6)
Internal components (3 of 6)
Paper feeder internal components
Paper pickup assembly
External covers, panels, and doors
Детали Paper pickup assembly
| Деталь: | Paper feeder driver PCA |
| Парткод: | RM1-6987-000CN |
| Деталь: | PAPER DELIVERY ASSEMBLY |
| Парткод: | RM1-6165-000CN |
| Деталь: | Cable, flat flexible, 3 |
| Парткод: | RK2-2969-000CN |
| Деталь: | Spacer, DC controller PCA |
| Парткод: | VT2-5176-004CN |
| Деталь: | Cable, primary transfer |
| Парткод: | RM1-6822-000CN |
| Деталь: | CABLE, REAR |
| Парткод: | RM1-6863-000CN |
| Деталь: | Formatter case |
| Парткод: | RM1-6066-000CN |
| Деталь: | Connector, 8-pin, paper-pickup |
| Парткод: | VS1-7514-008CN |
| Деталь: | Plate, box pillar |
| Парткод: | RC2-6673-000CN |
| Деталь: | Handle, lock, rear (paper feeder) |
| Парткод: | RC2-9303-000CN |
| Деталь: | Cover, right front (paper feeder) |
| Парткод: | RC2-9320-000CN |
| Деталь: | Link, right door, lower (paper feeder) |
| Парткод: | RC2-9327-000CN |
| Деталь: | Cover, rear (paper feeder) |
| Парткод: | RC2-9330-000CN |
| Деталь: | Cover, left (paper feeder) |
| Парткод: | RC2-9331-000CN |
| Деталь: | Cover, handle, lower (paper feeder) |
| Парткод: | RC2-9332-000CN |
| Деталь: | Link, right door, upper (paper feeder) |
| Парткод: | RC2-9335-000CN |
| Деталь: | Right door assembly (paper feeder) |
| Парткод: | RM1-6946-000CN |
| Деталь: | Cover, right lower assembly (paper feeder) |
| Парткод: | RM1-6948-000CN |
| Деталь: | Cover, upper front assembly (paper feeder) |
| Парткод: | RM1-6949-000CN |
| Деталь: | Drive assembly, duplex reverse (duplex model only) |
| Парткод: | RM1-6167-000CN |
| Деталь: | Drive assembly, simplex model |
| Парткод: | RM1-6121-000CN |
| Деталь: | Fuser assembly, 110V (included in service kit) |
| Парткод: | CE710-69001 |
| Деталь: | Fuser assembly, 220V (included in service kit) |
| Парткод: | CD710-69002 |
| Деталь: | Fuser drive assembly |
| Парткод: | RM1-6076-000CN |
| Деталь: | Fuser motor assembly |
| Парткод: | RM1-6075-000CN |
| Деталь: | Gear assembly, fuser |
| Парткод: | RM1-7914-000CN |
| Деталь: | Cable, SV joint, low-voltage power supply |
| Парткод: | RM1-6868-000CN |
| Деталь: | Spring, tension, registration sensor |
| Парткод: | RU6-2710-000CN |
| Деталь: | Support, frame, rear |
| Парткод: | RC2-7197-000CN |
| Деталь: | REGISTRATION SENSOR ASSEMBLY |
| Парткод: | RM1-6002-000CN |
| Деталь: | Support, frame, front |
| Парткод: | RC2-7196-000CN |
| Деталь: | Separation roller assembly (included in service kit) |
| Парткод: | CE710-69007 |
| Цена: | 2 900 ₽ |
| Деталь: | Connector, snap tight, black |
| Парткод: | VS1-7207-019CN |
| Деталь: | GUIDE, PAPER FEED |
| Парткод: | RC2-7297-000CN |
| Деталь: | Sensor, cassette last paper presence |
| Парткод: | RM1-6164-000CN |
| Деталь: | Cover, connector, lower |
| Парткод: | RC2-6642-000CN |
| Деталь: | Toner collection unit (included in the service kit) |
| Парткод: | CE710-69005 |
| Деталь: | Arm, waste toner, left |
| Парткод: | RC2-7035-000CN |
| Деталь: | Plate, arm reinforcement |
| Парткод: | RC2-9649-000CN |
| Деталь: | Arm, waste toner, right |
| Парткод: | RC2-7036-000CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RU6-2831-000CN |
| Деталь: | SHUTTER, EXHAUST |
| Парткод: | RC2-7010-000CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RU6-2683-000CN |
| Деталь: | Gear, link worm |
| Парткод: | RU6-0795-000CN |
| Деталь: | ITB assembly (included in the service kit) |
| Парткод: | CE710-69003 |
| Деталь: | Fan, power supply |
| Парткод: | RK2-2276-000CN |
| Цена: | 650 ₽ |
| Деталь: | LASER SCANNER ASSEMBLY |
| Парткод: | RM1-6122-000CN |
| Деталь: | Seal, toner supporter guide 1 |
| Парткод: | RC2-7018-000CN |
| Деталь: | Toner feed assembly |
| Парткод: | RM1-6040-000CN |
| Деталь: | Cable assembly, flat-flexible |
| Парткод: | RM1-6804-000CN |
| Деталь: | Cable, flat flexible, 3 |
| Парткод: | RK2-2969-000CN |
| Деталь: | Spacer, DC controller PCA |
| Парткод: | VT2-5176-004CN |
| Деталь: | Cable, primary transfer |
| Парткод: | RM1-6822-000CN |
| Деталь: | CABLE, REAR |
| Парткод: | RM1-6863-000CN |
| Деталь: | Formatter case |
| Парткод: | RM1-6066-000CN |
| Деталь: | Connector, 8-pin, paper-pickup |
| Парткод: | VS1-7514-008CN |
| Деталь: | Plate, box pillar |
| Парткод: | RC2-6673-000CN |
| Деталь: | Formatter PCA (not illustrated) |
| Парткод: | CE490-67901 |
| Деталь: | Waste toner detection PCA |
| Парткод: | RM1-6779-000CN |
| Деталь: | Primary transfer high-voltage PCA |
| Парткод: | RM1-6801-000CN |
| Деталь: | Driver PCA (duplex model) |
| Парткод: | RM1-6743-000CN |
| Деталь: | Driver PCA (simplex model) |
| Парткод: | RM1-6783-000CN |
| Деталь: | DC Controller PCA (duplex model) |
| Парткод: | RM1-6639-000CN |
| Деталь: | DC Controller PCA (simplex model) |
| Парткод: | RM1-6796-000CN |
| Деталь: | Secondary transfer high-voltage PCA |
| Парткод: | RM1-6802-000CN |
| Деталь: | Imaging high-voltage PCA |
| Парткод: | RM1-6800-000CN |
| Цена: | 14 900 ₽ |
| Деталь: | Environment sensor PCA |
| Парткод: | RK2-2884-000CN |
| Деталь: | Power switch PCA |
| Парткод: | RM1-6761-000CN |
| Деталь: | Low-voltage power supply PCA (110V) |
| Парткод: | RM1-6755-000CN |
| Деталь: | Low-voltage power supply PCA (220V) |
| Парткод: | RM1-6756-000CN |
| Деталь: | Drive assembly, duplex reverse (duplex model only) |
| Парткод: | RM1-6167-000CN |
| Деталь: | Drive assembly, simplex model |
| Парткод: | RM1-6121-000CN |
| Деталь: | Fuser assembly, 110V (included in service kit) |
| Парткод: | CE710-69001 |
| Деталь: | Fuser assembly, 220V (included in service kit) |
| Парткод: | CD710-69002 |
| Деталь: | Fuser drive assembly |
| Парткод: | RM1-6076-000CN |
| Деталь: | Fuser motor assembly |
| Парткод: | RM1-6075-000CN |
| Деталь: | Gear assembly, fuser |
| Парткод: | RM1-7914-000CN |
| Деталь: | Cable, SV joint, low-voltage power supply |
| Парткод: | RM1-6868-000CN |
| Деталь: | Spring, tension, registration sensor |
| Парткод: | RU6-2710-000CN |
| Деталь: | Support, frame, rear |
| Парткод: | RC2-7197-000CN |
| Деталь: | REGISTRATION SENSOR ASSEMBLY |
| Парткод: | RM1-6002-000CN |
| Деталь: | Support, frame, front |
| Парткод: | RC2-7196-000CN |
| Деталь: | Separation roller assembly (included in service kit) |
| Парткод: | CE710-69007 |
| Цена: | 2 900 ₽ |
| Деталь: | Connector, snap tight, black |
| Парткод: | VS1-7207-019CN |
| Деталь: | GUIDE, PAPER FEED |
| Парткод: | RC2-7297-000CN |
| Деталь: | Sensor, cassette last paper presence |
| Парткод: | RM1-6164-000CN |
| Деталь: | Cover, connector, lower |
| Парткод: | RC2-6642-000CN |
| Деталь: | Roller, secondary transfer, T2 (included in the service kit) |
| Парткод: | CE710-69004 |
| Деталь: | DOOR, RIGHT UPPER |
| Парткод: | RC2-7091-000CN |
| Деталь: | Roller, paper pickup, Tray 1 (included in the service kit) |
| Парткод: | CE710-69006 |
| Деталь: | Lifter plate assembly, Tray 1 |
| Парткод: | RM1-6043-000CN |
| Деталь: | Separation pad, Tray 1 (included in the service kit) |
| Парткод: | CE710-69006 |
| Деталь: | Tray 1 (MP tray) assembly |
| Парткод: | RM1-6045-000CN |
| Цена: | 1 500 ₽ |
| Деталь: | Right door assembly, duplex model |
| Парткод: | RM1-6104-000CN |
| Деталь: | Right door assembly, simplex model |
| Парткод: | RM1-6139-000CN |
| Деталь: | SPRING, CONTACT |
| Парткод: | RU6-2767-000CN |
| Деталь: | SPRING, CONTACT |
| Парткод: | RU6-2768-000CN |
| Деталь: | Spring, rod |
| Парткод: | RC2-6611-000CN |
| Деталь: | CABLE, SWITCH |
| Парткод: | RM1-6831-000CN |
| Деталь: | Cable, low-voltage AC joint |
| Парткод: | RM1-6811-000CN |
| Деталь: | Cable, low voltage power supply |
| Парткод: | RM1-6807-000CN |
| Деталь: | Cable, low-voltage power supply, test |
| Парткод: | RM1-6813-000CN |
| Деталь: | Cable, left, high-voltage power supply to low-voltage power supply |
| Парткод: | RM1-6835-000CN |
| Деталь: | CASSETTE |
| Парткод: | RM1-7138-000CN |
| Деталь: | Toner collection unit (included in the service kit) |
| Парткод: | CE710-69005 |
| Деталь: | Arm, waste toner, left |
| Парткод: | RC2-7035-000CN |
| Деталь: | Plate, arm reinforcement |
| Парткод: | RC2-9649-000CN |
| Деталь: | Arm, waste toner, right |
| Парткод: | RC2-7036-000CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RU6-2831-000CN |
| Деталь: | SHUTTER, EXHAUST |
| Парткод: | RC2-7010-000CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RU6-2683-000CN |
| Деталь: | Gear, link worm |
| Парткод: | RU6-0795-000CN |
| Деталь: | ITB assembly (included in the service kit) |
| Парткод: | CE710-69003 |
| Деталь: | Fan, power supply |
| Парткод: | RK2-2276-000CN |
| Цена: | 650 ₽ |
| Деталь: | LASER SCANNER ASSEMBLY |
| Парткод: | RM1-6122-000CN |
| Деталь: | Seal, toner supporter guide 1 |
| Парткод: | RC2-7018-000CN |
| Деталь: | Toner feed assembly |
| Парткод: | RM1-6040-000CN |
| Деталь: | Cable assembly, flat-flexible |
| Парткод: | RM1-6804-000CN |
| Деталь: | SPRING, CONTACT |
| Парткод: | RU6-2767-000CN |
| Деталь: | SPRING, CONTACT |
| Парткод: | RU6-2768-000CN |
| Деталь: | Spring, rod |
| Парткод: | RC2-6611-000CN |
| Деталь: | CABLE, SWITCH |
| Парткод: | RM1-6831-000CN |
| Деталь: | Cable, low-voltage AC joint |
| Парткод: | RM1-6811-000CN |
| Деталь: | Cable, low voltage power supply |
| Парткод: | RM1-6807-000CN |
| Деталь: | Cable, low-voltage power supply, test |
| Парткод: | RM1-6813-000CN |
| Деталь: | Cable, left, high-voltage power supply to low-voltage power supply |
| Парткод: | RM1-6835-000CN |
| Деталь: | Motor, main drive assembly |
| Парткод: | RM1-6089-000CN |
| Деталь: | Motor, drive, simplex model |
| Парткод: | RK2-0997-000CN |
| Деталь: | Motor, duplex drive (duplex model only) |
| Парткод: | RK2-0997-000CN |
| Деталь: | Cable, feed joint, environment sensor |
| Парткод: | RM1-6847-000CN |
| Деталь: | Spring, grounding, second-transfer high-voltage PCA |
| Парткод: | RU6-2772-000CN |
| Деталь: | Cap, T2 contact, second-transfer high-voltage PCA |
| Парткод: | RC2-6691-000CN |
| Деталь: | Spring, contact, second-transfer high-voltage PCA |
| Парткод: | RU6-2771-000CN |
| Деталь: | Spring, grounding, second-transfer high-voltage PCA |
| Парткод: | RC2-6700-000CN |
| Деталь: | Link, ITB coupling release |
| Парткод: | RC2-6823-000CN |
| Деталь: | Spring, tension, duplex model |
| Парткод: | RU6-2671-000CN |
| Деталь: | Hook, duplexing spring (duplex model only) |
| Парткод: | RC2-6932-000CN |
| Деталь: | Gear, 25T, duplex model |
| Парткод: | RU6-0771-000CN |
| Деталь: | Gear, 25T, duplex model |
| Парткод: | RU6-0772-000CN |
| Деталь: | Gear, 74T, duplex model |
| Парткод: | RU6-0773-000CN |
| Деталь: | Gear, 18T/29T, simplex model |
| Парткод: | RU6-0775-000CN |
| Деталь: | Cover, gear, simplex model |
| Парткод: | RC3-0688-000CN |
| Деталь: | Sensor, right door |
| Парткод: | WG8-5696-000CN |
| Цена: | 350 ₽ |
| Деталь: | Arm, ITB coupling release |
| Парткод: | RC2-6824-000CN |
| Деталь: | Rail, door link, rear lower |
| Парткод: | RC2-6635-000CN |
| Деталь: | Spring, tension, rear |
| Парткод: | RU6-2744-000CN |
| Деталь: | PLATE, RIGHT DOOR LINK, REAR |
| Парткод: | RC2-7273-000CN |
| Деталь: | Plate, right door link, fixed, rear |
| Парткод: | RL1-2282-000CN |
| Деталь: | SHAFT, RIGHT DOOR LINK |
| Парткод: | RU5-4979-000CN |
| Деталь: | LOCK, DOOR LINK, RIGHT |
| Парткод: | RC2-7234-000CN |
| Деталь: | Link, right door, 2 rear |
| Парткод: | RC2-7236-000CN |
| Деталь: | Link, right door, 2 front |
| Парткод: | RC2-7233-000CN |
| Деталь: | Plate, right door link, fixed, front |
| Парткод: | RL1-2281-000CN |
| Деталь: | HINGE, RIGHT DOOR, FRONT |
| Парткод: | RC2-7094-000CN |
| Деталь: | PLATE, RIGHT DOOR LINK, FRONT |
| Парткод: | RC2-7272-000CN |
| Деталь: | Spring, tension, front |
| Парткод: | RU6-2727-000CN |
| Деталь: | RAIL, DOOR LINK, FRONT LOWER |
| Парткод: | RC2-6634-000CN |
| Деталь: | Support, developing coupling |
| Парткод: | RC2-6811-000CN |
| Деталь: | Stopper, inner door, 1 |
| Парткод: | RC2-6719-000CN |
| Деталь: | Stopper, inner door, 2 |
| Парткод: | RC2-6736-000CN |
| Деталь: | SPRING, GROUNDING |
| Парткод: | RC2-7209-000CN |
| Деталь: | Mount, cover arm, front |
| Парткод: | RC2-6735-000CN |
| Деталь: | Arm, front cover, 1 |
| Парткод: | RC2-6732-000CN |
| Деталь: | Mount, inner door toggle |
| Парткод: | RC2-6717-000CN |
| Деталь: | Arm, front cover, 2 |
| Парткод: | RC2-6733-000CN |
| Деталь: | MOUNT, STOPPER ARM |
| Парткод: | RC2-6745-000CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RU6-2721-000CN |
| Деталь: | HINGE, FRONT COVER, LEFT |
| Парткод: | RC2-6713-000CN |
| Деталь: | Hinge, front cover, center |
| Парткод: | RC2-6738-000CN |
| Деталь: | HINGE, FRONT COVER, RIGHT |
| Парткод: | RC2-6715-000CN |
| Деталь: | MICROSWITCH |
| Парткод: | WC4-5251-000CN |
| Деталь: | Fan, fuser |
| Парткод: | RK2-2728-000CN |
| Цена: | 1 100 ₽ |
| Деталь: | SPRING, LEAF, GROUNDING |
| Парткод: | RC2-7092-000CN |
| Деталь: | Stopper, inner door, 1 |
| Парткод: | RC2-6719-000CN |
| Деталь: | Stopper, inner door, 2 |
| Парткод: | RC2-6736-000CN |
| Деталь: | SPRING, GROUNDING |
| Парткод: | RC2-7209-000CN |
| Деталь: | Mount, cover arm, front |
| Парткод: | RC2-6735-000CN |
| Деталь: | Arm, front cover, 1 |
| Парткод: | RC2-6732-000CN |
| Деталь: | Mount, inner door toggle |
| Парткод: | RC2-6717-000CN |
| Деталь: | Arm, front cover, 2 |
| Парткод: | RC2-6733-000CN |
| Деталь: | MOUNT, STOPPER ARM |
| Парткод: | RC2-6745-000CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RU6-2721-000CN |
| Деталь: | HINGE, FRONT COVER, LEFT |
| Парткод: | RC2-6713-000CN |
| Деталь: | Hinge, front cover, center |
| Парткод: | RC2-6738-000CN |
| Деталь: | HINGE, FRONT COVER, RIGHT |
| Парткод: | RC2-6715-000CN |
| Деталь: | MICROSWITCH |
| Парткод: | WC4-5251-000CN |
| Деталь: | Fan, fuser |
| Парткод: | RK2-2728-000CN |
| Цена: | 1 100 ₽ |
| Деталь: | SPRING, LEAF, GROUNDING |
| Парткод: | RC2-7092-000CN |
| Деталь: | Motor, main drive assembly |
| Парткод: | RM1-6089-000CN |
| Деталь: | Motor, drive, simplex model |
| Парткод: | RK2-0997-000CN |
| Деталь: | Motor, duplex drive (duplex model only) |
| Парткод: | RK2-0997-000CN |
| Деталь: | Cable, feed joint, environment sensor |
| Парткод: | RM1-6847-000CN |
| Деталь: | Spring, grounding, second-transfer high-voltage PCA |
| Парткод: | RU6-2772-000CN |
| Деталь: | Cap, T2 contact, second-transfer high-voltage PCA |
| Парткод: | RC2-6691-000CN |
| Деталь: | Spring, contact, second-transfer high-voltage PCA |
| Парткод: | RU6-2771-000CN |
| Деталь: | Spring, grounding, second-transfer high-voltage PCA |
| Парткод: | RC2-6700-000CN |
| Деталь: | Link, ITB coupling release |
| Парткод: | RC2-6823-000CN |
| Деталь: | Spring, tension, duplex model |
| Парткод: | RU6-2671-000CN |
| Деталь: | Hook, duplexing spring (duplex model only) |
| Парткод: | RC2-6932-000CN |
| Деталь: | Gear, 25T, duplex model |
| Парткод: | RU6-0771-000CN |
| Деталь: | Gear, 25T, duplex model |
| Парткод: | RU6-0772-000CN |
| Деталь: | Gear, 74T, duplex model |
| Парткод: | RU6-0773-000CN |
| Деталь: | Gear, 18T/29T, simplex model |
| Парткод: | RU6-0775-000CN |
| Деталь: | Cover, gear, simplex model |
| Парткод: | RC3-0688-000CN |
| Деталь: | Sensor, right door |
| Парткод: | WG8-5696-000CN |
| Цена: | 350 ₽ |
| Деталь: | Arm, ITB coupling release |
| Парткод: | RC2-6824-000CN |
| Деталь: | Rail, door link, rear lower |
| Парткод: | RC2-6635-000CN |
| Деталь: | Spring, tension, rear |
| Парткод: | RU6-2744-000CN |
| Деталь: | PLATE, RIGHT DOOR LINK, REAR |
| Парткод: | RC2-7273-000CN |
| Деталь: | Plate, right door link, fixed, rear |
| Парткод: | RL1-2282-000CN |
| Деталь: | SHAFT, RIGHT DOOR LINK |
| Парткод: | RU5-4979-000CN |
| Деталь: | LOCK, DOOR LINK, RIGHT |
| Парткод: | RC2-7234-000CN |
| Деталь: | Link, right door, 2 rear |
| Парткод: | RC2-7236-000CN |
| Деталь: | Link, right door, 2 front |
| Парткод: | RC2-7233-000CN |
| Деталь: | Plate, right door link, fixed, front |
| Парткод: | RL1-2281-000CN |
| Деталь: | HINGE, RIGHT DOOR, FRONT |
| Парткод: | RC2-7094-000CN |
| Деталь: | PLATE, RIGHT DOOR LINK, FRONT |
| Парткод: | RC2-7272-000CN |
| Деталь: | Spring, tension, front |
| Парткод: | RU6-2727-000CN |
| Деталь: | RAIL, DOOR LINK, FRONT LOWER |
| Парткод: | RC2-6634-000CN |
| Деталь: | Support, developing coupling |
| Парткод: | RC2-6811-000CN |
| Деталь: | Switch, bottom (paper feeder) |
| Парткод: | WC2-5512-000CN |
| Деталь: | Motor, pickup (paper feeder) |
| Парткод: | RK2-1331-000CN |
| Цена: | 2 500 ₽ |
| Деталь: | Lifter drive assembly (paper feeder) |
| Парткод: | RM1-3819-000CN |
| Деталь: | Cassette (paper feeder) |
| Парткод: | RM1-6942-000CN |
| Деталь: | Paper pickup assembly (paper feeder) |
| Парткод: | RM1-6944-000CN |
| Деталь: | Paper feeder driver PCA |
| Парткод: | RM1-6987-000CN |
| Деталь: | Roller, pickup, paper feeder (included in service kit) |
| Парткод: | CE710-69008 |
| Деталь: | Roller, feed, paper feeder (included in service kit) |
| Парткод: | CE710-69008 |
| Деталь: | Label, cassette number |
| Парткод: | RC2-9363-000CN |
| Деталь: | Paper pickup roller assembly (included in service kit) |
| Парткод: | CE710-69007 |
| Цена: | 2 900 ₽ |
| Деталь: | Paper pickup assembly (simplex model) |
| Парткод: | RM1-6106-000CN |
| Деталь: | Paper pickup assembly (duplex model) |
| Парткод: | RM1-6105-000CN |
| Деталь: | COVER, TOP |
| Парткод: | RM1-7149-000CN |
| Деталь: | Door, toner collection unit access |
| Парткод: | RC2-7034-000CN |
| Деталь: | COVER, DIMM |
| Парткод: | RC2-9033-000CN |
| Деталь: | COVER, REAR |
| Парткод: | RM1-7146-000CN |
| Деталь: | COVER, RIGHT REAR |
| Парткод: | RM1-7142-000CN |
| Деталь: | Cover, handle, lower-right, rear |
| Парткод: | RC2-6626-000CN |
| Деталь: | Cover, handle, lower-right, front |
| Парткод: | RC2-6627-000CN |
| Деталь: | Cover, right front assembly |
| Парткод: | RM1-7145-000CN |
| Деталь: | Cover, front assembly |
| Парткод: | RM1-7133-000CN |
| Деталь: | Cover, handle, lower-left |
| Парткод: | RC2-6625-000CN |
| Деталь: | Cover, left assembly |
| Парткод: | RM1-7143-000CN |
| Цена: | 2 200 ₽ |
Коды ошибок
10.10.XX
10.9531
10.XXXX
50.1
50.2
50.3
50.4
50.7
50.8
50.9
51.20
51.21
51.22
51.23
54.15
54.16
54.17
54.18
55.0601
55.0602
55.1
55.3
55.4
56.X
57.01
57.02
58.04
59.3
59.4
59.50
59.51
59.52
59.53
59.60
59.61
59.62
59.63
59.70
59.71
59.72
59.73
59.80
59.81
59.82
59.83
59.9
59.A0
59.C0
59.F0
Описание
| Error code: | 10.10.XX |
| Display: | 10.10.XX Supply error |
| Description: | • 10.1000 = black supply memory is missing • 10.1001 = cyan supply memory is missing • 10.1002 = magenta supply memory is missing • 10.1003 = yellow supply memory is missing |
| Remedy: | Check the e-label. If it is broken or damaged, replace the cartridge. Verify that the cartridge is installed in the correct location. Remove and reinstall the cartridge and then power-cycle the product. If the error is with a color cartridge, try swapping it with a different color cartridge in the tray. If the same message appears, then there is an engine problem. If a different 10.10.XX message appears, replace the cartridge. |
| Error code: | 10.9531 |
| Display: | 10.9531 |
| Description: | Unspecified supply error in Toner Collection Unit |
| Error code: | 10.XXXX |
| Display: | 10.XXXX Supply error |
| Description: | The supply memory for one of the print cartridges cannot be read or is missing. • 10.0000 = black supply memory error • 10.0001 = cyan supply memory error • 10.0002 = magenta supply memory error • 10.0003 = yellow supply memory error |
| Remedy: | Reinstall the print cartridge. Turn the product off and then on. If the problem is not solved, replace the cartridge. |
| Error code: | 50.1 |
| Display: | 50.1 FUSER ERROR |
| Description: | AC power is not being provided to the fuser assembly. AC voltage is necessary to generate heat in the fuser assembly. |
| Remedy: | 1. Verify that the fuser power cable at the back of the device is connected and the ECU is fully seated. 2. If the message persists, replace the fuser assembly. |
| Error code: | 50.2 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred. fuser warm up service. |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.3 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred. high fuser temperature |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.4 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred.f aulty fuser. |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.7 |
| Display: | 50.X FUSER ERROR To continue turn off then on |
| Description: | A fuser error has occurred. fuser pressure release malfunction |
| Remedy: | 1. Turn the device off, and allow it to cool. 2. Verify that the correct model of fuser is installed. 3. Verify that the correct voltage fuser is installed. 4. Reinstall the fuser, and check the connection between the fuser and the high-voltage power supply. Replace the high-voltage power supply if the connector is damaged. 5. Replace the fuser. Replace the dc controller PCA. See DC controller PCA on page 357. 7. Replace the high-voltage power supply. |
| Error code: | 50.8 |
| Display: | 50.X FUSER ERROR To continue turn off then on |
| Description: | A fuser error has occurred. low fuser temperature |
| Remedy: | 1. Turn the device off, and allow it to cool. 2. Verify that the correct model of fuser is installed. 3. Verify that the correct voltage fuser is installed. 4. Reinstall the fuser, and check the connection between the fuser and the high-voltage power supply. Replace the high-voltage power supply if the connector is damaged. 5. Replace the fuser. Replace the dc controller PCA. See DC controller PCA on page 357. 7. Replace the high-voltage power supply. |
| Error code: | 50.9 |
| Display: | 50.X FUSER ERROR To continue turn off then on |
| Description: | A fuser error has occurred. high fuser temperature |
| Remedy: | 1. Turn the device off, and allow it to cool. 2. Verify that the correct model of fuser is installed. 3. Verify that the correct voltage fuser is installed. 4. Reinstall the fuser, and check the connection between the fuser and the high-voltage power supply. Replace the high-voltage power supply if the connector is damaged. 5. Replace the fuser. Replace the dc controller PCA. See DC controller PCA on page 357. 7. Replace the high-voltage power supply. |
| Error code: | 51.20 |
| Display: | 51.20 |
| Description: | Black laser scanner error. An error with the laser/scanner assembly has occurred in the product. |
| Causes: | Black laser scanner error |
| Remedy: | action1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the product. |
| Error code: | 51.21 |
| Display: | 51.XX Error |
| Description: | The product has experienced an internal error with a laser scanner. cyan |
| Causes: | Cyan laser scanner error |
| Remedy: | 1. Turn the product off and then on. 2. Verify that the connectors J61 and J62 on the DC controller PCA are correctly seated. Also verify that the connectors on the laser scanner are correctly seated. 3. If the problem remains, replace the laser scanner. |
| Error code: | 51.22 |
| Display: | 51.XX Error |
| Description: | The product has experienced an internal error with a laser scanner. magenta |
| Causes: | Magenta laser scanner error |
| Remedy: | 1. Turn the product off and then on. 2. Verify that the connectors J61 and J62 on the DC controller PCA are correctly seated. Also verify that the connectors on the laser scanner are correctly seated. 3. If the problem remains, replace the laser scanner. |
| Error code: | 51.23 |
| Display: | 51.XX Error |
| Description: | The product has experienced an internal error with a laser scanner. yellow |
| Causes: | Yellow laser scanner error |
| Remedy: | 1. Turn the product off and then on. 2. Verify that the connectors J61 and J62 on the DC controller PCA are correctly seated. Also verify that the connectors on the laser scanner are correctly seated. 3. If the problem remains, replace the laser scanner. |
| Error code: | 54.15 |
| Display: | 54.XX Error |
| Description: | The product has experienced an error with one of the print cartridge sensors. yellow |
| Causes: | Yellow toner level sensor error |
| Remedy: | 1. Open the door to the cartridge tray and slide out the cartridge tray. 2. Inspect the white mechanism on the relevant cartridge. It is located on the right side of the cartridge. 3. Push the mechanism in and out slowly. A black flag will raise up as you push it. If it does not move smoothly, push repeatedly to try to clear any potential obstruction. 4. Push in the cartridge tray and close the door. |
| Error code: | 54.16 |
| Display: | 54.XX Error |
| Description: | The product has experienced an error with one of the print cartridge sensors. magenta |
| Causes: | Magenta toner level sensor error |
| Remedy: | 1. Open the door to the cartridge tray and slide out the cartridge tray. 2. Inspect the white mechanism on the relevant cartridge. It is located on the right side of the cartridge. 3. Push the mechanism in and out slowly. A black flag will raise up as you push it. If it does not move smoothly, push repeatedly to try to clear any potential obstruction. 4. Push in the cartridge tray and close the door. |
| Error code: | 54.17 |
| Display: | 54.XX Error |
| Description: | The product has experienced an error with one of the print cartridge sensors. cyan |
| Causes: | Cyan toner level sensor error |
| Remedy: | 1. Open the door to the cartridge tray and slide out the cartridge tray. 2. Inspect the white mechanism on the relevant cartridge. It is located on the right side of the cartridge. 3. Push the mechanism in and out slowly. A black flag will raise up as you push it. If it does not move smoothly, push repeatedly to try to clear any potential obstruction. 4. Push in the cartridge tray and close the door. |
| Error code: | 54.18 |
| Display: | 54.XX Error |
| Description: | The product has experienced an error with one of the print cartridge sensors. black |
| Causes: | Black toner level sensor error |
| Remedy: | 1. Open the door to the cartridge tray and slide out the cartridge tray. 2. Inspect the white mechanism on the relevant cartridge. It is located on the right side of the cartridge. 3. Push the mechanism in and out slowly. A black flag will raise up as you push it. If it does not move smoothly, push repeatedly to try to clear any potential obstruction. 4. Push in the cartridge tray and close the door. |
| Error code: | 55.0601 |
| Display: | 55.0601 |
| Description: | DC controller NVRAM data error. The product has experienced an error with one of the internal sensors. |
| Causes: | DC controller NVRAM data error |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the DC Controller PCB Assembly (HP Part #: RM2-8680-000CN).4. If the error persists, replace the product. |
| Error code: | 55.0602 |
| Display: | 55.0602 |
| Description: | DC controller NVRAM access error. The product has experienced an error with one of the internal sensors. |
| Causes: | DC controller NVRAM access error |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the DC Controller PCB Assembly (HP Part #: RM2-8680-000CN).4. If the error persists, replace the product. |
| Error code: | 55.1 |
| Display: | 55.1 |
| Description: | DC controller memory error. The product has experienced an error with one of the internal sensors. |
| Causes: | DC controller memory error |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the DC Controller PCB Assembly (HP Part #: RM2-8680-000CN).4. If the error persists, replace the product. |
| Error code: | 55.3 |
| Display: | 55.3 |
| Description: | Engine communication error. The product has experienced an error with one of the internal sensors. |
| Causes: | Engine communication error |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the DC Controller PCB Assembly (HP Part #: RM2-8680-000CN).4. If the error persists, replace the product. |
| Error code: | 55.4 |
| Display: | 55.4 Error |
| Description: | The product has experienced an engine communication timeout error. |
| Remedy: | Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. |
| Error code: | 56.X |
| Display: | 56.X ERROR |
| Description: | The input device is unknown. 56.1 = unknown input device |
| Remedy: | 1. Turn the product off and then on. 2. Reinstall all the input devices. 3. Remove all non-HP paper handling devices |
| Error code: | 57.01 |
| Display: | 57.01 |
| Description: | Fan 1 error. The product has experienced an error with its internal fan. |
| Causes: | Fan 1 error |
| Remedy: | 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the internal cooling fan (HP Part #: RK2-8068-000CN).4. If the error persists, replace the product. |
| Error code: | 57.02 |
| Display: | 57.02 Error |
| Description: | The fuser fan (FM2) is defective |
| Remedy: | 1. Reconnect the connector (J121X) on the DC controller PCA and the intermediate connector (J524). 2. Measure the voltage between the connector J121X-6 and J121X-4 on the DC controller PCA right after the product is turned on. If the voltage changes from 0 V to approximately 24 V, replace the fixing fan. |
| Error code: | 58.04 |
| Display: | 58.04 |
| Description: | Low voltage power supply malfunction. The product has experienced an error with the low voltage power supply. |
| Causes: | Low voltage power supply malfunction |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. Check the voltage label on the back of the product. If the product is rated 220V and is plugged into a 110V outlet, this error might occur. In most cases, no damage is caused to the product. If a power transformer is used to convert 220V power to 110V, verify that the transformer power rating is sufficient to operate the product.4. If the error persists, replace the Low Voltage Power Supply PCB Assembly: M402, M403 L.V.POWER SUPPLY PCB ASS`Y (110v) RM2-8516-000CN M402, M403 L.V.POWER SUPPLY PCB ASS`Y (220v) RM2-8517-000CN M426, M427 L.V.POWER SUPPLY PCB ASS`Y (110v) RM2-8518-000CN M426, M427 L.V.POWER SUPPLY PCB ASS`Y (220v) RM2-8519-000CN5. If the error persists, replace the product. |
| Error code: | 59.3 |
| Display: | 59.X Error |
| Description: | The product has experienced a problem with one of the motors. - Fuser motor startup error |
| Remedy: | 1. Reconnect the connector (J516) on the fuser motor and the connector (J81) on the DC controller PCA. 2. Run the fuser motor drive test in the actuator drive mode to verify that the fuser motor is functioning correctly. If it is not, replace the fuser motor unit. |
| Error code: | 59.4 |
| Display: | 59.XY ERROR - To Continue Turn Off Then On |
| Description: | An error has occurred in one of the motors. Print-cartridge-motor error |
| Remedy: | 1. Turn the MFP off, and then turn the MFP on. 2. Reconnect the wire-harness on the DC controller PCA for the motor that is indicated. For the main motor, this is connector J98. For the print-cartridge motor, this is connector J86. 3. Replace the motor. 4. Replace the DC controller PCA. |
| Error code: | 59.50 |
| Display: | 59.50 ERROR |
| Description: | A main motor (M1) error has occurred. Motor operation is verified during device power-up. |
| Remedy: | 1. Turn the device off and then on. 2. Verify that nothing is hindering the main motor. If necessary, remove all paper trays and the print cartridge, and then turn on the device and listen for motor operation. 3. Verify that the main motor is connected to connector J407 on the ECU. You might have to remove the main cooling fan to see this connection. 4. If the message persists, replace the motor. |
| Error code: | 59.51 |
| Display: | 59.X Error |
| Description: | Image drum motor startup or rotation error-cyan, magenta, or yellow. - Image drum motor startup error-cyan |
| Remedy: | 1. Reconnect the connector (J515) on the drum motor and the connector (J81) on the DC controller PCA. 2. Run the drum motor drive test in the actuator drive mode to verify that the drum motor is functioning correctly. If it is not, replace the drum motor unit. |
| Error code: | 59.52 |
| Display: | 59.X Error |
| Description: | Image drum motor startup or rotation error-cyan, magenta, or yellow. - Image drum motor startup error-magenta |
| Remedy: | 1. Reconnect the connector (J515) on the drum motor and the connector (J81) on the DC controller PCA. 2. Run the drum motor drive test in the actuator drive mode to verify that the drum motor is functioning correctly. If it is not, replace the drum motor unit. |
| Error code: | 59.53 |
| Display: | 59.X Error |
| Description: | Image drum motor startup or rotation error-cyan, magenta, or yellow. - Image drum motor startup error-yellow |
| Remedy: | 1. Reconnect the connector (J515) on the drum motor and the connector (J81) on the DC controller PCA. 2. Run the drum motor drive test in the actuator drive mode to verify that the drum motor is functioning correctly. If it is not, replace the drum motor unit. |
| Error code: | 59.60 |
| Display: | 59.X Error |
| Description: | Image drum motor startup or rotation error-black. - Image drum motor rotation error-black |
| Remedy: | 1. Reconnect the connector (J517) on the ITB motor and the connector (J81) on the DC controller PCA. 2. Run the drum motor drive test in the actuator drive mode to verify that the ITB motor is functioning correctly. If it is not, replace the ITB motor unit. |
| Error code: | 59.61 |
| Display: | 59.X Error |
| Description: | Image drum motor startup or rotation error-cyan, magenta, or yellow. - Image drum motor rotation error-cyan |
| Remedy: | 1. Reconnect the connector (J515) on the drum motor and the connector (J81) on the DC controller PCA. 2. Run the drum motor drive test in the actuator drive mode to verify that the drum motor is functioning correctly. If it is not, replace the drum motor unit. |
| Error code: | 59.62 |
| Display: | 59.X Error |
| Description: | Image drum motor startup or rotation error-cyan, magenta, or yellow. - Image drum motor rotation error-magenta |
| Remedy: | 1. Reconnect the connector (J515) on the drum motor and the connector (J81) on the DC controller PCA. 2. Run the drum motor drive test in the actuator drive mode to verify that the drum motor is functioning correctly. If it is not, replace the drum motor unit. |
| Error code: | 59.63 |
| Display: | 59.X Error |
| Description: | Image drum motor startup or rotation error-cyan, magenta, or yellow. - Image drum motor rotation error-yellow |
| Remedy: | 1. Reconnect the connector (J515) on the drum motor and the connector (J81) on the DC controller PCA. 2. Run the drum motor drive test in the actuator drive mode to verify that the drum motor is functioning correctly. If it is not, replace the drum motor unit. |
| Error code: | 59.70 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Black developer motor startup error |
| Causes: | Black developer motor startup error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.71 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Cyan developer motor startup error |
| Causes: | Cyan developer motor startup error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.72 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Magenta developer motor startup error |
| Causes: | Magenta developer motor startup error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.73 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Yellow developer motor startup error |
| Causes: | Yellow developer motor startup error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.80 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Black developer motor rotation error |
| Causes: | Black developer motor rotation error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.81 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Cyan developer motor rotation error |
| Causes: | Cyan developer motor rotation error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.82 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Magenta developer motor rotation error |
| Causes: | Magenta developer motor rotation error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.83 |
| Display: | 59.X Error |
| Description: | Developing motor abnormal rotation or start-up. - Yellow developer motor rotation error |
| Causes: | Yellow developer motor rotation error |
| Remedy: | 1. Reconnect the connector (J514) on the developing motor and the connector (J81) on the DC controller PCA. 2. Run the developing motor drive test in the actuator drive mode to verify that the developing motor is functioning correctly. If it is not functioning correctly, replace the developing motor unit. |
| Error code: | 59.9 |
| Display: | 59.X Error |
| Description: | ITB motor start error or rotation error. - ITB motor start error |
| Remedy: | 1. Reconnect the connector (J517) on the ITB motor and the connector (J81) on the DC controller PCA. 2. Run the ITB motor drive test in the actuator drive mode to verify that the ITB motor is functioning correctly. If it is not functioning correctly, replace the ITB motor unit. |
| Error code: | 59.A0 |
| Display: | 59.X Error |
| Description: | ITB motor start error or rotation error. - ITB motor rotation error |
| Causes: | ITB motor rotation error |
| Remedy: | 1. Reconnect the connector (J517) on the ITB motor and the connector (J81) on the DC controller PCA. 2. Run the ITB motor drive test in the actuator drive mode to verify that the ITB motor is functioning correctly. If it is not functioning correctly, replace the ITB motor unit. |
| Error code: | 59.C0 |
| Display: | 59.C0 Error |
| Description: | Developer motor rotation error. |
| Causes: | Developer motor rotation error |
| Remedy: | 1. Reconnect the connector (J518) on the developing disengagement motor, the connector (J1005) on the driver PCA and the connector (J91) on the DC controller PCA. 2. Run the sensor test in the sensor monitor mode to verify that the developing disengagement sensor is functioning correctly. If it is not, replace the developing disengagement sensor unit. 3. Run the developing unit engagement and disengagement drive test in the actuator drive mode to verify that the disengagement mechanism is functioning correctly. If it is not functioning correctly, replace the developing disengagement motor. |
| Error code: | 59.F0 |
| Display: | 59.F0 Error |
| Description: | Transfer alienation failure. |
| Causes: | Transfer alienation failure |
| Remedy: | 1. Check if the ITB unit is installed. 2. Reconnect the connector (J181) on the DC controller PCA. 3. Run the switch test in the sensor monitor mode to verify that the primary transfer roller disengagement switch is functioning correctly. If it is not functioning correctly, replace the primary transfer roller disengagement switch unit. 4. Run the primary transfer roller engagement and disengagement drive test in the actuator drive mode to verify that the primary transfer roller disengagement mechanism is functioning correctly. If it is not functioning correctly, replace the fuser drive unit |
