Konica-Minolta bizhub C25
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
120000
Скорость печати
A4
24
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Область применения |
большой офис |
Число страниц в месяц |
120 000 |
Макс. формат |
A4 |
Сканер |
|
Факс |
|
Копир |
|
Цветность печати |
цветная |
Размещение |
настольный |
Телефон |
|
Печать фотографий |
|
Тип устройства |
МФУ |
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Принтер |
|
Время разогрева |
38 |
Количество цветов |
4 |
Прямая печать |
|
Печать без полей |
|
Система непрерывной подачи чернил |
|
Пигментные чернила |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 600 |
| По Y | 600 |
Скорость ч/б печати |
|
| A4 | 24 |
Время выхода первого отпечатка |
|
| Ч/б | 16 |
| Цветн, | 16 |
Копир |
|
Время выхода первой копии |
11 |
Макс, количество копий за цикл |
99 |
Шаг масштабирования |
0,1 |
Значение масштаба |
|
| Максимальное | 4 |
| Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
| По Y | 600 |
| По X | 600 |
Сканер |
|
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Макс. формат оригинала |
A4 |
Устройство автоподачи оригиналов |
двустороннее |
Емкость устройства автоподачи оригиналов |
35 |
Тип сканера |
планшетный/протяжный |
Оттенки серого |
256 |
Разрешение сканера |
|
| По Х | 600 |
Скорость сканирования |
|
| Ч/б | 20 |
| Цветн, | 10 |
Расходные материалы |
|
Ресурс фотобарабана |
30 000 |
Ресурс ч/б картриджа/тонера |
6 000 |
Ресурс цветного картриджа/тонера |
6 000 |
Количество картриджей |
4 |
Печать на: |
|
| Фотобумаге |
|
| Пленках |
|
| CD/DVD |
|
| Рулоне |
|
| Этикетках |
|
| Матовой бумаге |
|
| Карточках |
|
| Глянцевой бумаге |
|
| Конвертах |
|
Плотность бумаги |
|
| Минимальная | 60 |
| Максимальная | 210 |
Факс |
|
Цветной |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
PC Fax |
|
Макс, разрешение |
|
| По X | 203 |
| По Y | 392 |
Телефон |
|
Проводная трубка |
|
Спикерфон |
|
Стандарт DECT |
|
Автоответчик |
|
Caller ID |
|
АОН |
|
Беспроводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
| PCL 6 |
|
| PostScript |
|
| PostScript 3 |
|
| PCL 5c |
|
| PCL 5e |
|
|
|
|
| PostScript 2 |
|
| PPDS |
|
Количество установленных шрифтов |
|
| PostScript | 137 |
| PCL | 80 |
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Стандартная | 350 |
| Максимальная | 850 |
Вывод бумаги |
|
| Стандартный | 150 |
Финишер |
|
Электронная сортировка |
|
Сортер |
|
Сортировка со сдвигом |
|
Степлер |
|
Брошюровщик |
|
Интерфейсы |
|
USB |
|
Веб-интерфейс |
|
Ethernet (RJ-45) |
|
Версия USB |
2,0 |
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Wi-Fi 802.11n |
|
Bluetooth |
|
LPT |
|
AirPrint |
|
Инфракрасный порт |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
Память/Процессор |
|
Частота процессора |
800 |
Объем памяти |
256 |
Макс, объем памяти |
768 |
Дополнительная информация |
|
Работа от аккумулятора |
|
Экран |
|
Поддержка ОС |
|
| DOS |
|
| Windows |
|
| Linux |
|
| Mac OS |
|
Потребляемая мощность |
|
| При работе | 1 100 |
Габариты |
|
Глубина |
558 |
Вес |
32,5 |
Высота |
490 |
Ширина |
447 |
Модули
ELECTRICAL COMPONENTS 2
MAIN DRIVE SECTION 2
PRINT HEAD SECTION
IR UNIT
VERTICAL CONVEYANCE SECTION 3
TRANSFER BELT UNIT
FUSING SECTION
VERTICAL CONVEYANCE SECTION 2
TRANSFER GUIDE SECTION
ELECTRICAL COMPONENTS
High Voltage Section
ADF unit
TONER BOTTLE DRIVE SECTION
OPERATION PANEL SECTION
DUP REVERSE DRIVE SECTION
CASSETTE SECTION
MAIN DRIVE SECTION 3
Vertical conveyance Section
EXTERNAL PARTS
POWER SUPPLY SECTION
MAIN DRIVE SECTION
PAPER FEED DRIVE SECTION
Детали VERTICAL CONVEYANCE SECTION 2
| Деталь: | SHOULDER SCREW |
| Парткод: | 4139 2328 01 |
| Деталь: | WASHER |
| Парткод: | A0FD 1532 00 |
| Деталь: | COVER |
| Парткод: | A2YF 1324 00 |
| Деталь: | Shield Frame |
| Парткод: | A2YF 1334 01 |
| Деталь: | REINFORCE PLATE |
| Парткод: | A2YF 1337 01 |
| Деталь: | Controller(PS/PCL Board) |
| Парткод: | A2YF H050 04 |
| Деталь: | Mounting Plate /1 |
| Парткод: | A2YF 1380 00 |
| Деталь: | Mounting Plate /3 |
| Парткод: | A2YF 1382 00 |
| Деталь: | Controller Flatcable /1 |
| Парткод: | A2YF N106 00 |
| Деталь: | PWB Assembly |
| Парткод: | A2YF PP99 00 |
| Деталь: | Reinforce Plate /Left |
| Парткод: | A2YF 1336 01 |
| Деталь: | PWB Assembly |
| Парткод: | A2YF PP20 00 |
| Деталь: | Mounting Plate /2 |
| Парткод: | A2YF 1381 00 |
| Деталь: | GUIDE |
| Парткод: | A2YF 1386 00 |
| Деталь: | FlatCable |
| Парткод: | A2YF N110 00 |
| Деталь: | Controller Flatcable /2 |
| Парткод: | A0VD N110 01 |
| Деталь: | Brushless motor |
| Парткод: | A2YF M102 00 |
| Деталь: | BEARING |
| Парткод: | A00F 2139 00 |
| Деталь: | Mounting Plate /A |
| Парткод: | A0VD 2485 01 |
| Деталь: | CLUTCH |
| Парткод: | A011 M200 00 |
| Деталь: | PIN |
| Парткод: | 4036 3014 01 |
| Деталь: | Gear 21T |
| Парткод: | A0VD 2183 01 |
| Деталь: | LD Wiring /1 |
| Парткод: | A0VD N10P 01 |
| Деталь: | LD Flatcable /1 |
| Парткод: | A2YF N105 00 |
| Деталь: | PRINT HEAD ASSY |
| Парткод: | A1AR R701 00 |
| Деталь: | RAIL |
| Парткод: | A0VD 1113 02 |
| Деталь: | Installing Rubber foot |
| Парткод: | A0VD 1013 01 |
| Деталь: | GEAR 16T |
| Парткод: | A0VD 2357 00 |
| Деталь: | GEAR 16T |
| Парткод: | A0VD 2354 00 |
| Деталь: | Gear 16/26T |
| Парткод: | A0VD 2356 00 |
| Деталь: | Gear 22/30T |
| Парткод: | A0VD 2359 00 |
| Деталь: | GEAR 16/16T |
| Парткод: | A0VD 2355 00 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 3627 02 |
| Деталь: | LEVER |
| Парткод: | A0VD 3626 02 |
| Деталь: | Drive Holder |
| Парткод: | A0VD 2351 01 |
| Деталь: | COVER |
| Парткод: | A0VD 1087 03 |
| Деталь: | Hold Holder |
| Парткод: | A0VD 1367 01 |
| Деталь: | SOLID STATE SWITCH |
| Парткод: | 9335 1400 51 |
| Деталь: | Scatteringprevention Seal |
| Парткод: | A0VD 1094 00 |
| Деталь: | STOPPER |
| Парткод: | A0VD 1074 01 |
| Деталь: | Waste Toner Bottle |
| Парткод: | A1AU 0Y1 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 1075 00 |
| Деталь: | SPACER |
| Парткод: | A0VD 1090 01 |
| Деталь: | CIS ASSY |
| Парткод: | A2YF PP11 00 |
| Деталь: | FlatCable |
| Парткод: | A2YF PP03 01 |
| Деталь: | EARTH GROUND |
| Парткод: | A2YF PP01 00 |
| Деталь: | SHAFT |
| Парткод: | A2YF PP07 00 |
| Деталь: | IR Cover Assy |
| Парткод: | A2YF PP12 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A2YF PP05 00 |
| Деталь: | PULLEY ASSY |
| Парткод: | A2YF PP15 00 |
| Деталь: | TAPE |
| Парткод: | A2YF PP09 00 |
| Деталь: | FRAME |
| Парткод: | A2YF PP13 00 |
| Деталь: | DRIVING ASSY |
| Парткод: | A2YF PP14 00 |
| Деталь: | FlatCable |
| Парткод: | A2YF PP02 01 |
| Деталь: | FERRITECORE |
| Парткод: | A2YF PP00 00 |
| Деталь: | LABEL |
| Парткод: | A121 9446 00 |
| Деталь: | Label Prohibit |
| Парткод: | A121 9447 00 |
| Деталь: | LABEL Scale |
| Парткод: | A2YF PP08 00 |
| Деталь: | OPTICAL UNIT |
| Парткод: | A2YF PP19 00 |
| Деталь: | PLATE SPRING |
| Парткод: | A2YF PP06 00 |
| Деталь: | DUP Transport Assy |
| Парткод: | A0VD R717 00 |
| Деталь: | CLUTCH |
| Парткод: | A0VD M202 01 |
| Деталь: | GEAR 16T |
| Парткод: | A0VD 2353 01 |
| Деталь: | ROLL |
| Парткод: | 4138 3528 02 |
| Деталь: | BUSHING |
| Парткод: | A0VD 7023 00 |
| Деталь: | BUSHING |
| Парткод: | 4138 3532 02 |
| Деталь: | PULLING COIL SPRING |
| Парткод: | A0VD 7025 01 |
| Деталь: | ROLLER |
| Парткод: | A0VD 7021 01 |
| Деталь: | ROLLER |
| Парткод: | A0VD 7029 02 |
| Деталь: | LEVER |
| Парткод: | A0VD 7047 00 |
| Деталь: | GEAR 32T |
| Парткод: | A0VD 7044 00 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A034 5638 00 |
| Деталь: | Gear 35/42T |
| Парткод: | A0VD 7043 00 |
| Деталь: | GEAR 35T |
| Парткод: | A0VD 7051 01 |
| Деталь: | GEAR 15T |
| Парткод: | A0VD 7030 01 |
| Деталь: | PULLING COIL SPRING |
| Парткод: | A0VD 7037 00 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0VD 7053 03 |
| Деталь: | CLUTCH |
| Парткод: | A011 M200 00 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD 7035 01 |
| Деталь: | GEAR 28T |
| Парткод: | A0VD 7049 00 |
| Деталь: | BUSHING |
| Парткод: | A0VD 7024 00 |
| Деталь: | GEAR 18T |
| Парткод: | A0VD 7052 00 |
| Деталь: | SEAL |
| Парткод: | A034 2140 00 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A034 2134 00 |
| Деталь: | PAPERFEED SOLENOID |
| Парткод: | A034 M200 00 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | HOLDER |
| Парткод: | A0VD 1117 00 |
| Деталь: | COMPRESSING COIL SPRING |
| Парткод: | A0VD 1116 00 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 1141 01 |
| Деталь: | Torsion Coil spring /Rear |
| Парткод: | A0VD 1105 00 |
| Деталь: | TRANSFER UNIT |
| Парткод: | A148 0Y1 |
| Деталь: | RAIL /FRONT |
| Парткод: | A0VD 1101 04 |
| Деталь: | CONTACT |
| Парткод: | A0VD 1368 00 |
| Деталь: | Torsion Coil spring /Front |
| Парткод: | A0VD 1104 00 |
| Деталь: | Hold Holder /ASSY |
| Парткод: | A0VD 1341 02 |
| Деталь: | RAIL |
| Парткод: | A0VD 1111 02 |
| Деталь: | RAIL |
| Парткод: | A0VD 1112 03 |
| Деталь: | Photoconductor Wiring /1 |
| Парткод: | A0VD N10A 00 |
| Деталь: | Holder /Front |
| Парткод: | A0VD 1114 02 |
| Деталь: | SHUTTER |
| Парткод: | A0VD 3623 00 |
| Деталь: | SEAL |
| Парткод: | A0VD 3622 01 |
| Деталь: | SEAL |
| Парткод: | A0VD 3624 00 |
| Деталь: | PULLING COIL SPRING |
| Парткод: | A0VD 3625 00 |
| Деталь: | RAIL /REAR |
| Парткод: | A0VD 1102 05 |
| Деталь: | DUCT |
| Парткод: | A0VD 1115 02 |
| Деталь: | SEAL |
| Парткод: | A0VD 1151 00 |
| Деталь: | SEAL |
| Парткод: | A0VD 1153 01 |
| Деталь: | SEAL |
| Парткод: | A0VD 1152 00 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0VD 2147 00 |
| Деталь: | SEAL |
| Парткод: | A0VD 3637 00 |
| Деталь: | SEAL |
| Парткод: | A0VD 1154 00 |
| Деталь: | Protection Seal |
| Парткод: | A0VD 1343 00 |
| Деталь: | GUIDE |
| Парткод: | A121 9025 00 |
| Деталь: | Label JAM |
| Парткод: | A0VD 9491 00 |
| Деталь: | Label Caution /JAM |
| Парткод: | A121 9483 00 |
| Деталь: | LEVER |
| Парткод: | A121 8930 02 |
| Деталь: | Fusing Unit 100V |
| Парткод: | A148 001 |
| Деталь: | FUSING UNIT 120V |
| Парткод: | A148 011 |
| Деталь: | FUSING UNIT 230V |
| Парткод: | A148 021 |
| Деталь: | ACTUATOR |
| Парткод: | A0VD 9073 00 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | SPRING |
| Парткод: | A0VD 8902 00 |
| Деталь: | ACTUATOR |
| Парткод: | A2YF 8912 01 |
| Деталь: | Paper exit Holder |
| Парткод: | A121 8903 02 |
| Деталь: | Paper exit Holder |
| Парткод: | A121 8953 02 |
| Деталь: | Gear 38/40T |
| Парткод: | A0VD 8908 00 |
| Деталь: | PAPER EXIT ROLLER |
| Парткод: | A0VD 8901 02 |
| Деталь: | GUIDE |
| Парткод: | A0VD 9081 01 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 8924 00 |
| Деталь: | Paper exit Roll |
| Парткод: | A2YF 8913 00 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | SHAFT |
| Парткод: | A0VD 1621 01 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A0VD 7017 01 |
| Деталь: | 2nd Transfer Roller |
| Парткод: | A148 0Y2 |
| Деталь: | COVER |
| Парткод: | A2YF 1606 01 |
| Деталь: | Lever /Rear |
| Парткод: | A0VD 1634 00 |
| Деталь: | Lever /Front |
| Парткод: | A0VD 1636 00 |
| Деталь: | Label 1 |
| Парткод: | A121 9431 00 |
| Деталь: | GUIDE |
| Парткод: | A0VD 7064 00 |
| Деталь: | CONTACT |
| Парткод: | A0VD 7063 00 |
| Деталь: | Photo sensing |
| Парткод: | A0VD M500 00 |
| Деталь: | HOLDER |
| Парткод: | A0VD 7065 00 |
| Деталь: | Sensor Wiring /3 |
| Парткод: | A0VD N10D 00 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 7062 01 |
| Деталь: | COVER |
| Парткод: | A0VD 7061 01 |
| Деталь: | Sensor Wiring /2 |
| Парткод: | A0VD N10C 00 |
| Деталь: | HUMIDITY SENSOR |
| Парткод: | A0VD M501 00 |
| Деталь: | GUIDE |
| Парткод: | A0VD 7073 03 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 7072 00 |
| Деталь: | ACTUATOR |
| Парткод: | A0VD 7071 01 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | GUIDE |
| Парткод: | A0VD 7075 01 |
| Деталь: | PWB-Assembli(PWB-A Assy) |
| Парткод: | A2YF H001 02 |
| Деталь: | Separating Plate |
| Парткод: | A2YF 1321 00 |
| Деталь: | Mounting Frame |
| Парткод: | A0VD 1328 03 |
| Деталь: | Insulating Sheet /2 |
| Парткод: | A0VD 1392 01 |
| Деталь: | AC Wiring /1 |
| Парткод: | A2YF N103 00 |
| Деталь: | ROCKER SWITCH |
| Парткод: | A034 M602 00 |
| Деталь: | Paperfeed Wiring /2 |
| Парткод: | A0VD N10F 00 |
| Деталь: | AC Wiring /1 |
| Парткод: | A0VD N100 01 |
| Деталь: | Hold Holder |
| Парткод: | A0VD 1361 00 |
| Деталь: | HIGH VOLTAGE UNIT |
| Парткод: | AOVD M404 02 |
| Деталь: | HV Flatcable |
| Парткод: | AOVD N111 01 |
| Деталь: | Duct 12 |
| Парткод: | AOVD 1394 01 |
| Деталь: | SEAL |
| Парткод: | AOVD 1395 00 |
| Деталь: | TOP COVER |
| Парткод: | A0HF PP12 00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0FD PP2K 00 |
| Деталь: | PICK-UP ROLLER |
| Парткод: | A0HF PP40 00 |
| Деталь: | TAKE-UP ROLLER |
| Парткод: | A0HF PP39 00 |
| Деталь: | PAD ASSY |
| Парткод: | A0HF PP15 00 |
| Деталь: | ADF Guide Assy |
| Парткод: | A2YF PP10 00 |
| Деталь: | ROLLER |
| Парткод: | A0HF PP41 00 |
| Деталь: | ROLLER |
| Парткод: | A0HF PP42 00 |
| Деталь: | TRAY ASSY |
| Парткод: | A0HF PP13 01 |
| Деталь: | Cover R |
| Парткод: | A0HF PP14 00 |
| Деталь: | HINGE |
| Парткод: | A0HF PP44 00 |
| Деталь: | HINGE |
| Парткод: | A0HF PP43 00 |
| Деталь: | COVER ASSY |
| Парткод: | A0HF PP11 00 |
| Деталь: | PAD ASSY |
| Парткод: | A2YF PP04 01 |
| Деталь: | SPONGE |
| Парткод: | A0HF PP17 00 |
| Деталь: | CLAMP |
| Парткод: | A0HF PP20 00 |
| Деталь: | CABLE TIE |
| Парткод: | A0HF PP19 00 |
| Деталь: | ADF UNIT |
| Парткод: | A2YF PP18 01 |
| Деталь: | GEAR 29T |
| Парткод: | A0VD 2364 00 |
| Деталь: | GEAR 25T |
| Парткод: | A0VD 2366 01 |
| Деталь: | Drive Holder |
| Парткод: | A0VD 2369 02 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | SHAFT |
| Парткод: | A0VD 2365 00 |
| Деталь: | Toner bottle Drive Assy |
| Парткод: | A2YF R700 00 |
| Деталь: | CLUTCH |
| Парткод: | A0VD M200 00 |
| Деталь: | STOPPER |
| Парткод: | A0VD 2374 00 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD 2378 00 |
| Деталь: | LABEL |
| Парткод: | A0VD 4910 00 |
| Деталь: | LABEL |
| Парткод: | A0VD 4911 00 |
| Деталь: | LABEL |
| Парткод: | A0VD 4912 00 |
| Деталь: | LABEL |
| Парткод: | A0VD 4913 00 |
| Деталь: | Sheet/English |
| Парткод: | A2YF 9501 00 |
| Деталь: | Sheet/Simple Chinese |
| Парткод: | A2YF 9506 00 |
| Деталь: | Sheet/Japanese |
| Парткод: | A2YF 9508 00 |
| Деталь: | Sheet/Traditional Chinese |
| Парткод: | A2YF 9504 00 |
| Деталь: | PANEL ASSEMBLY |
| Парткод: | A2YF PP16 00 |
| Деталь: | PANEL ASSEMBLY |
| Парткод: | A2YF PP17 00 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A2YF 1617 01 |
| Деталь: | COVER |
| Парткод: | A2YF 1383 00 |
| Деталь: | Relay harness |
| Парткод: | A2YF N112 00 |
| Деталь: | DUCT |
| Парткод: | A2YF 1053 00 |
| Деталь: | SEAL |
| Парткод: | A2YF 1054 00 |
| Деталь: | FERRITECORE |
| Парткод: | A2YF M705 00 |
| Деталь: | SPEAKER |
| Парткод: | A121 M715 00 |
| Деталь: | DUCT |
| Парткод: | A2YF 1335 02 |
| Деталь: | FAN MOTOR |
| Парткод: | 9313 1300 51 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD 8231 00 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 8234 00 |
| Деталь: | SHAFT |
| Парткод: | A0VD 8232 00 |
| Деталь: | Gear 23T |
| Парткод: | A0VD 8228 00 |
| Деталь: | GEAR 19T |
| Парткод: | A0VD 8227 00 |
| Деталь: | CLUTCH |
| Парткод: | A0VD M200 00 |
| Деталь: | GEAR 18T |
| Парткод: | A0VD 8224 00 |
| Деталь: | Guide /Upper |
| Парткод: | A0VD 8204 03 |
| Деталь: | GEAR 14T |
| Парткод: | A0VD 8211 00 |
| Деталь: | ROLL |
| Парткод: | A0VD 8202 00 |
| Деталь: | Reverse/exit Roller |
| Парткод: | A0VD 8201 03 |
| Деталь: | GUIDE |
| Парткод: | A0VD 8256 00 |
| Деталь: | CONTACT |
| Парткод: | A0VD 8209 00 |
| Деталь: | Neutralizing Brush |
| Парткод: | A0VD 8941 00 |
| Деталь: | DUP Reverse Drive Assy |
| Парткод: | A2YF R702 00 |
| Деталь: | Relay harness |
| Парткод: | A2YF N111 00 |
| Деталь: | BUSHING |
| Парткод: | 4131 3003 01 |
| Деталь: | CLUTCH |
| Парткод: | 4030 3034 01 |
| Деталь: | ROLLER |
| Парткод: | 4138 3032 02 |
| Деталь: | ROLLER ASSY |
| Парткод: | 4658 0151 06 |
| Деталь: | HOLDER |
| Парткод: | A0VD 6211 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 3254 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4131 3056 01 |
| Деталь: | GUIDE |
| Парткод: | 4131 3057 02 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0VD 6231 01 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0VD 6232 00 |
| Деталь: | CASSETTE ASSY |
| Парткод: | A0VD R725 00 |
| Деталь: | Label Prohibition inkjet media |
| Парткод: | 4138 7316 01 |
| Деталь: | Label Paper Direction |
| Парткод: | A2YF 9451 00 |
| Деталь: | Label 2 |
| Парткод: | A121 9432 00 |
| Деталь: | Brushless motor |
| Парткод: | A2YF M102 00 |
| Деталь: | Manual Feed Tray Unit |
| Парткод: | A0VD R716 00 |
| Деталь: | TRAY |
| Парткод: | A0VD 5617 00 |
| Деталь: | FRICTION SHEET |
| Парткод: | 4138 3255 01 |
| Деталь: | MANUAL PAPER FEED ASSY |
| Парткод: | A0VD R713 00 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD 5613 01 |
| Деталь: | GUIDE |
| Парткод: | A0VD 5618 00 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4131 3056 01 |
| Деталь: | ROLLER |
| Парткод: | 4138 3032 02 |
| Деталь: | CLUTCH |
| Парткод: | 4030 3034 01 |
| Деталь: | COMPRESSING COIL SPRING |
| Парткод: | A0VD 6248 00 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | ROLLER ASSY |
| Парткод: | 4658 0151 06 |
| Деталь: | HOLDER |
| Парткод: | A0VD 6211 00 |
| Деталь: | Open/close Stopper |
| Парткод: | A0VD 1623 00 |
| Деталь: | Vertical Conveyance Assy |
| Парткод: | A2YF R701 00 |
| Деталь: | Label Prohibition inkjet media |
| Парткод: | 4138 7316 01 |
| Деталь: | Label Paper Direction |
| Парткод: | A2YF 9452 00 |
| Деталь: | COVER |
| Парткод: | A2YF 1609 01 |
| Деталь: | Cover /Rear |
| Парткод: | A2YF 1630 01 |
| Деталь: | Cover /Right rear |
| Парткод: | A2YF 1603 02 |
| Деталь: | COVER |
| Парткод: | A0VD 1665 01 |
| Деталь: | TRAY |
| Парткод: | A2YF 1618 00 |
| Деталь: | COVER |
| Парткод: | A2YF 1601 02 |
| Деталь: | GROUND PLATE |
| Парткод: | A2YF 1388 00 |
| Деталь: | COVER |
| Парткод: | A02E 1678 00 |
| Деталь: | Cover /Right front |
| Парткод: | A2YF 1605 01 |
| Деталь: | COVER |
| Парткод: | A0VD 1664 01 |
| Деталь: | Label bizhub C25 |
| Парткод: | A2YF 9424 00 |
| Деталь: | LABEL LOGO MARK |
| Парткод: | A00F 9420 00 |
| Деталь: | Label Emperon |
| Парткод: | A011 9462 00 |
| Деталь: | Cover /Front |
| Парткод: | A2YF 1604 00 |
| Деталь: | SHEET |
| Парткод: | A0VD 9418 01 |
| Деталь: | Cover /Left |
| Парткод: | A2YF 1602 00 |
| Деталь: | FAN MOTOR |
| Парткод: | 4139 M100 00 |
| Деталь: | Cooling Duct |
| Парткод: | A2YF 1022 00 |
| Деталь: | Power supply /100V |
| Парткод: | A2YF M400 01 |
| Деталь: | Power supply /230V |
| Парткод: | A2YF M401 01 |
| Деталь: | Protection Cover |
| Парткод: | A121 1041 01 |
| Деталь: | Detecting Part |
| Парткод: | A0VD 1355 12 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | Hold Holder |
| Парткод: | A0VD 1353 17 |
| Деталь: | Adjusting Spring |
| Парткод: | A0VD 1352 01 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD 1354 02 |
| Деталь: | MICRO SWITCH |
| Парткод: | 9J06 M601 00 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | A108 R900 00 |
| Деталь: | SEAL |
| Парткод: | A0VD 1397 00 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A0VD M502 00 |
| Деталь: | SEAL |
| Парткод: | A121 1026 00 |
| Деталь: | SPACER |
| Парткод: | V502 0100 21 |
| Деталь: | FRAME |
| Парткод: | A2YF 1331 00 |
| Деталь: | Wiring Guide /1 |
| Парткод: | A2YF 1385 01 |
| Деталь: | Brushless motor |
| Парткод: | A2YF M100 00 |
| Деталь: | Drive Wiring /2 |
| Парткод: | A0VD N106 00 |
| Деталь: | COMPRESSING COIL SPRING |
| Парткод: | A0VD 2203 00 |
| Деталь: | BUSHING |
| Парткод: | A0VD 2202 01 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD 2198 00 |
| Деталь: | HOLD PLATE |
| Парткод: | A0VD 2113 03 |
| Деталь: | PAPER FEED DRIVE ASSY |
| Парткод: | A0VD R701 11 |
| Деталь: | CLUTCH |
| Парткод: | A02E M200 00 |
| Деталь: | GEAR 22T |
| Парткод: | A0VD 2312 00 |
| Деталь: | GEAR 25T |
| Парткод: | A0VD 2309 01 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD 2333 01 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108 M501 00 |
| Деталь: | LEVER |
| Парткод: | A0VD 6241 00 |
| Деталь: | HOLDER |
| Парткод: | 4002 3123 03 |
| Деталь: | Paperfeed Wiring /1 |
| Парткод: | A0VD N10E 01 |
Коды ошибок
0010
0017
0018
004A
004E
0062
0094
0096
0300
0310
0500
0502
0503
0510
0520
0650
0F52
0F53
0F54
0F55
1038
133C
13DD
13E2
13E3
13F0
14A3
3C00 ... 3C10
3FFF
4FFF
C002
C003
C013
C015
C025
C026
C027
C050
C051
C052
C053
C060
CF01
F001
FFFF
Описание
| Error code: | 0010 |
| Display: | P MOTOR 1 |
| Description: | Network I/F Initialize has not been completed. |
| Causes: | Network I/F does not work correctly. Firmware for Network I/F is not installed. |
| Remedy: | Check the firmware is installed into Network I/F. Main Board replacement |
| Error code: | 0017 |
| Display: | P MOTOR 2 |
| Description: | Intermediate transport motor malfunction • The intermediate transport motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the intermediate transport motor is being rotated. |
| Causes: | • Transport motor (M2) • Printer control board (PRCB) |
| Remedy: | 1 Check the M3 connector for proper connection and correct as necessary. 2 Check M3 for proper drive coupling and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 M3 operation check MFPB PJ27MFPB-3 to 7 C-5. 5 Change M3. 6 Change MFPB. 7 Change DCPU. |
| Error code: | 0018 |
| Display: | D MOTOR 2 |
| Description: | Color PC Drum Motor’s failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning. |
| Causes: | • Developing motor (M1) • Printer control board (PRCB) |
| Remedy: | 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the connector of motor for proper drive coupling and correct as necessary. 3 Check the PWB-M connector for proper connection and correct as necessary. 4 M2 operation check PWB-M CNDM3-5 (REM) PWB-M CNDM3-8 (LOCK) C-23. 5 Change PWB-M. |
| Error code: | 004A |
| Display: | Duplex fan failure CODE (004A) Turn power off, on |
| Description: | Duplex Unit Fan Failure The Duplex Unit Fan Motor lock signal remains HIGH for a predetermined consecutive period of time while the cooling fan motor remains energized. |
| Causes: | • Engine Control Board, PL13.0.20 • Duplex Unit, PL14.1 |
| Remedy: | 1 Check the Engine Control Board connector P/J21. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Replace the Engine Control Board. Does the problem persist? Go to step 3. Complete. 3 Replace the Duplex Unit. Complete. |
| Error code: | 004E |
| Display: | LVPS fan failure CODE (004E) Turn power off, on |
| Description: | LVPS Fan Failure • The Power Supply Cooling Fan Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the Power Supply Cooling Fan Motor is being rotated. |
| Causes: | • Power Supply Cooling Fan Motor, PL12.0.11 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check the High Voltage Board connectors CN1 and CN2, and the Engine Control Board connector P/J17. Are the connectors seated properly? Go to step 2. Reseat the connector(s). If the problem persists, go to step 2. 2 Check the Power Supply Cooling Fan Motor control signals at CN2. Are the signals operating correctly? Replace the motor. If the problem persists, go to step 3. Go to step 3. 3 Check the Power Supply Cooling Fan Motor control signals at PJ17 on the Engine Control Board. Are the control signals operating correctly? Replace the High Voltage Board. If the problem persists, go to step 4. Go to step 4. 4 On the Engine Control Board, check for +24 VDC at P/J2-1, 5, and 7. Check for +5 VDC at P/J2-2. Are the voltages present and within specification? Go to step 5. Replace the Power Supply. If the problem persists, go to step 5. 5 Replace the Engine Control Board. Complete. |
| Error code: | 0062 |
| Display: | TRAY3 FEED MOT |
| Description: | Tray 3 media feed motor malfunction • The motor lock signal remains HIGH for a given period of consecutive time while the media feed motor is being rotated. |
| Remedy: | 1 Check the connector between M1-PCCB PJ3 for proper connection and correct as necessary. 2 Check the connector between PCCB PJ1, PJ2-relay CN53, CN70-PRCB PJ25 for proper connection and correct as necessary. 3 Check the M1 connector for proper drive coupling and correct as necessary. 4 M1 operation check PCCB PJ3-4 to 8 K-2. 5 Change M1. 6 Change PCCB. 7 Change PRCB. |
| Error code: | 0094 |
| Display: | Trans. roll failure CODE (0094) Turn power off, on |
| Description: | Transfer Roll Failure Possible causes: • The 2nd Image Transfer Retraction Position Sensor(PS3) is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started. • The 2nd Image Transfer Retraction Position Sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started. |
| Causes: | • 2nd Image Transfer Retraction Position Sensor (PS3), PL4.0.9 • 2nd Image Transfer Retraction Position Solenoid (SD4), PL7.2.23 • Main Motor, PL9.1.6 • Engine Control Board, PL13.0.20 |
| Remedy: | 1 Check the Main Motor connector CN37. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Check the Main Motor for proper drive coupling and correct as necessary. Does the problem persist? Go to step 3. Complete. 3 Check the 2nd Image Transfer Retraction Position Solenoid connector CN5. Is the connector seated properly? Go to step 4. Reseat the connector. If the problem persists, go to step 4. 4 Check the 2nd Image Transfer Retraction Position Solenoid for proper drive coupling and correct as necessary. Does the problem persist? Go to step 5. Complete. 5 Check the 2nd Image Transfer Retraction Position Sensor control signal for a voltage change at P/J12-3 on the Engine Control Board. Is the signal operating correctly? Go to step 6. Replace the Engine Control Board. If the problem persists, go to step 6. 6 Replace the 2nd Image Transfer Retraction Position Solenoid. Does the problem persist? Go to step 7. Complete. 7 Replace the 2nd Image Transfer Retraction Position Sensor. Complete. |
| Error code: | 0096 |
| Display: | XFER DETACH 1 |
| Description: | Transfer Belt Separation • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn ON (Retracting) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is retracting. • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn OFF (Pressuring) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is pressuring. |
| Causes: | • 1st transfer pressure sensor (PS17) • Transport motor (M2) • 1st transfer pressure solenoid (SD1) • Printer control board (PRCB) |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 PC6 I/O check, Sensor check 3 CL3 operation check PWB-M CNDM1-11 (ON) K to L-2. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M. |
| Error code: | 0300 |
| Display: | POLYGON MOTOR |
| Description: | Polygon motor malfunction |
| Causes: | • The polygon motor does not rotate evenly even after the lapse of a given period of time after it has been started. • The motor lock signal remains HIGH for a given period of consecutive time while the polygon motor is being rotated. |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PH unit. - - 3 Change PRCB. - - |
| Error code: | 0310 |
| Display: | LASER ERROR |
| Description: | Laser malfunction |
| Causes: | • The SOS signal is not detected within a given period of time after the output of the laser has been started. |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PH unit. - - 3 Change PRCB. - - |
| Error code: | 0500 |
| Display: | FUSER ERROR |
| Description: | Fuser warm-up failure |
| Causes: | • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started. |
| Remedy: | 1 Change fuser unit. - - 2 For C110: 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. ROTATE TONER key -ATTENTION key - ATTENTION key - ROTATE TONER key. 4. Main switch is turned OFF/ON. For C130n: 1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. See P.103 - - 3 Change PRCB. - - 4 Change DCPU. - - |
| Error code: | 0502 |
| Display: | Thermistor failure CODE (0502) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0502 Thermistor Failure The temperature detected by the thermistor does not reach an expected level after the warm-up cycle starts. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0503 |
| Display: | TERMISTOR2 |
| Description: | Thermistor resistance failure |
| Causes: | • The difference between the temperature detected by thermistor/1 and that detected by thermistor/2 exceeds a predetermined value. |
| Remedy: | 1 Change fuser unit. - - 2 For C110: 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. ROTATE TONER key -ATTENTION key - ATTENTION key - ROTATE TONER key. 4. Main switch is turned OFF/ON. For C130n: 1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. See P.103 - - 3 Change PRCB. - - 4 Change DCPU. - - |
| Error code: | 0510 |
| Display: | Fuser failure CODE (0510) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0510 Fuser Failure The temperature detected by the thermistor remains lower than expected for a given period of time or longer. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0520 |
| Display: | Fuser failure CODE (0520) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0520 Fuser Failure The temperature detected by the thermistor remains higher than expected for a given period of time or longer. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0650 |
| Display: | Scanner home failure CODE (0650) Turn power off, on |
| Description: | Scanner Home Failure • A low motor lock signal is not detected even after the lapse of a predetermined period of time after the Polygon Motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period of time while the Polygon Motor remains energized. |
| Causes: | • Engine Control Board, PL13.0.20 • Image Processor Board, PL2.0.4 |
| Remedy: | 1 Check connector P/J2 on the Image Processor Board. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Replace the Scanner. Does the problem persist? Go to step 3. Complete. 3 Replace the Engine Control Board. Does the problem persist? Go to step 4. Complete. 4 Replace the Power Supply. Complete. |
| Error code: | 0F52 |
| Display: | TE SENSOR Y |
| Description: | Toner level sensor /Y malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/Y (PS13) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F53 |
| Display: | TE SENSOR M |
| Description: | Toner level sensor /M malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/M (PS14) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F54 |
| Display: | TE SENSOR C |
| Description: | Toner level sensor /C malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/C (PS15) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F55 |
| Display: | TE SENSOR K |
| Description: | Toner level sensor /K malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/K (PS16) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 1038 |
| Display: | Interface failure CODE (1038) Turn power off, on |
| Description: | Interface Failure. • Engine Control Board to Image Processor Board connection failure. • The copier determines that there is an error if the Engine Control Board fails to send an acknowledgement signal to the Image Processor Board for a given period of time or more. • An error command signal is transmitted from the Image Processor Board to Engine Control Board. • An error status signal is transmitted from the Engine Control Board to Image Processor Board. |
| Causes: | • Engine Control Board, PL13.0.20 • Image Processor Board, PL2.0.4 |
| Remedy: | 1 Check every connector on the Engine Control Board and the Image Processor Board. Are the connectors seated properly? Go to step 2. Reseat the connectors. If the problem persists, go to step 2. 2 Replace the Image Processor Board. Does the problem persist? Go to step 3. Complete. 3 Change the Engine Control Board. Complete. |
| Error code: | 133C |
| Display: | Fax modem failure CODE (133C) Turn power off, on |
| Description: | Fax Modem Failure |
| Causes: | • Fax Board, PL13.0.30 |
| Remedy: | 1 Replace the Fax Board. Complete. |
| Error code: | 13DD |
| Display: | Initial toner failed CODE (13DD) Replace toner Contact Xerox for unit exchange |
| Description: | Initial Toner Failure The printer determines that an initial toner cartridge has been installed. The printer is programmed to only use initial toner cartridges one time. |
| Remedy: | Install a Xerox Standard or High Capacity cartridge. |
| Error code: | 13E2 |
| Display: | Engine ROM failure CODE (13E2) Turn power off, on |
| Description: | Engine ROM Failure Flash ROM writing is found faulty during a check. |
| Causes: | • Engine Control Board, PL13.0.20 • Image Processor Board, PL2.0.4 |
| Remedy: | 1 Check the Engine Control Board connectors. Are the connectors seated properly? Go to step 2. Reseat the connectors. If the problem persists, go to step 2. 2 Replace the Engine Control Board. Does the problem persist? Go to step 3. Complete. 3 Replace the Image Processor Board. Complete. |
| Error code: | 13E3 |
| Display: | FLASH DEVICE |
| Description: | Flash ROM device fault • An erase error occurs during erasing of data in flash ROM. |
| Causes: | • Printer control board (PRCB) • MFP board (MFPB) |
| Remedy: | 1 Check the MFPB for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB. |
| Error code: | 13F0 |
| Display: | ENGINE ERR |
| Description: | Engine control failure |
| Causes: | • An undefined malfunction occurs in the engine section (PRCB, etc.). |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PRCB. - - 3 Change MFPB. |
| Error code: | 14A3 |
| Display: | Scanner head failure CODE (14A3) Turn power off, on |
| Description: | Scanner Head Failure The intensity of the light emitted from the exposure lamp of the scanner falls short of the specified value. |
| Causes: | • Scanner, PL2.0.4 • Image Processor Board, PL13.0.29/30 |
| Remedy: | 1 Check the connectors on the Image Processor Board. Are the connectors seated properly? Go to step 2. Reseat the connectors. If the problem persists, go to step 2. 2 Replace the Scanner. Does the problem persist? Go to step 3. Complete. 3 Change the Image Processor Board. Complete. |
| Error code: | 3C00 ... 3C10 |
| Description: | Trouble related to security • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON. |
| Error code: | 3FFF |
| Display: | Control ROM failure CODE (3FFF) Turn power off, on |
| Description: | Control ROM Failure • The copier determines that there is an error if writing to the flash ROM fails during upgrading of the firmware. • When the power switch is turned ON, the error indicator lights up steadily and a corresponding message appears on the display. • If this error message appears, no operations are possible. It is not possible to upgrade the firmware from a PC connected through USB connection. |
| Causes: | • Engine Control Board, PL13.0.20 • Image Processor Board, PL13.0.29/30 |
| Remedy: | 1 Identify the specific firmware that is responsible for the error, and then rewrite the firmware. Does the problem persist? Go to step 2. Complete. 2 Unplug the NVRAM chip on the Engine Control Board, and then plug the chip back in. Does the problem persist? Go to step 3. Complete. 3 Change the Engine Control Board. Does the problem persist? Go to step 4. Complete. 4 Change the Image Processor Board. Complete. |
| Error code: | 4FFF |
| Description: | Controller connect error • MFP board/1 (MFPB/1) to MFP board/2 (MFPB/2) connection failure. |
| Causes: | MFP board/1 (MFPB/1) MFP board/2 (MFPB/2) |
| Remedy: | 1 Turn OFF and ON the power switch. 2 Check the MFPB/1 connector for proper connection and correct as necessary. 3 Check the MFPB/2 connector for proper connection and correct as necessary. 4 Check for proper connection between MFPB/1 and MFPB/2 and correct as necessary. 5 Change MFPB/2. 6 Change MFPB/1. |
| Error code: | C002 |
| Display: | RAM ERROR |
| Description: | RAM (standard) error at startup • RAM error at Standard Memory is detected during printer start-up. |
| Causes: | • MFP board (MFPB) • Standard memory |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check connection state of the extension memory and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change the extension memory. 5 Change PWB-P. |
| Error code: | C003 |
| Display: | RAM ERROR |
| Description: | Memory copy PCB 2 problem* 1 • Problems with data from memory copy PCB 2. |
| Causes: | Defective memory copy PCB 2. |
| Remedy: | Replace memory copy PCB 2 and check for correct operation. |
| Error code: | C013 |
| Display: | H/W ADDRESS |
| Description: | MAC address error at startup (MAC address is invalid) • Invalid Mac address is detected during printer start-up. |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P. |
| Error code: | C015 |
| Display: | BOOT ROM |
| Description: | Backup memory read/write problem (engine PCB) • Read and write data does not match. |
| Causes: | Defective backup RAM or engine PCB. |
| Remedy: | Replace the engine PCB and check for correct operation. |
| Error code: | C025 |
| Display: | CONTROLLER ROM |
| Description: | Controller ROM error • Lead error of destination setting file is detected during the printer starting. |
| Causes: | MFP board (MFPB) |
| Error code: | C026 |
| Display: | CONTROLLER ROM |
| Description: | Memory PCB communication problem • There is no reply after five retries at transmitting. • There is no reply after five retries at receiving. |
| Causes: | Poor contact in the connector terminals. Defective main PCB or memory PCB. |
| Remedy: | Check the connection of connector CN3 on the main PCB and the connector on memory PCB. Repair or replace if necessary. Replace the main PCB or memory PCB and check for correct operation. |
| Error code: | C027 |
| Display: | CONTROLLER ROM |
| Description: | Controller ROM error • Final check sum error is detected during the printer starting. |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P. |
| Error code: | C050 |
| Display: | HDD ERROR |
| Description: | Optional second paper feeder communication problem • Communication fails five times successively. |
| Causes: | Paper feeder installed incorrectly. Defective main PCB or drawer main PCB. |
| Remedy: | Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the main PCB or drawer main PCB and check for correct operation. |
| Error code: | C051 |
| Display: | HDD DISK FULL |
| Description: | Optional third paper feeder communication problem • Communication fails five times successively. |
| Causes: | Paper feeder installed incorrectly. Defective main PCB or drawer main PCB. |
| Remedy: | Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the main PCB or drawer main PCB and check for correct operation. |
| Error code: | C052 |
| Display: | CARD ERROR |
| Description: | Compact Flash access error • When correct access to the Compact Flash is failed during access. |
| Causes: | MFP board (MFPB) Compact flash card |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change Compact Flash. 5 Change PWB-P. |
| Error code: | C053 |
| Display: | CARD FULL |
| Description: | Compact Flash full error • Range for user space is full during access to the Compact Flash. |
| Causes: | MFP board (MFPB) Compact flash card |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Change Compact Flash. |
| Error code: | C060 |
| Display: | UPDATE ERROR |
| Description: | Detect hopping Motor lock error |
| Causes: | Hopping motor does not rotate nomary. |
| Remedy: | Power OFF/ON Turn off the Power of the printer and back on. |
| Error code: | CF01 |
| Display: | Controller failure CODE (CF01) Turn power off, on |
| Description: | Controller Failure |
| Remedy: | The printer determined that there is an NVRAM failure. Contact a Xerox representative to correct this error. |
| Error code: | F001 |
| Description: | Controller JAM • Controller JAM is occurred. |
| Error code: | FFFF |
| Display: | I/F COMM ERROR |
| Description: | Interface Communication error • Correct communication is failed when receiving/sending the command between PWB-A and PWB-P. |
| Causes: | Print control board (PRCB) MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary 3 Check the PWB-M connector for proper connection and correct as necessary. 4 Change PWB-M. |
