Konica-Minolta bizhub C30P
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
25000
Скорость печати
A4
35
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Область применения |
малый офис |
Число страниц в месяц |
25 000 |
Тип устройства |
Принтер |
Макс. формат |
A4 |
Сканер |
|
Печать фотографий |
|
Копир |
|
Факс |
|
Телефон |
|
Цветность печати |
цветная |
Размещение |
настольный |
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Принтер |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
|
Прямая печать |
|
Время разогрева |
45 |
Количество цветов |
4 |
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 600 |
Скорость ч/б печати |
|
| A4 | 35 |
| A4 | 30 |
Время выхода первого отпечатка |
|
| Цветн, | 9 |
| Ч/б | 7 |
Сканер |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Расходные материалы |
|
Количество картриджей |
4 |
Печать на: |
|
| CD/DVD |
|
| Рулоне |
|
| Фотобумаге |
|
| Пленках |
|
| Матовой бумаге |
|
| Конвертах |
|
| Глянцевой бумаге |
|
| Этикетках |
|
| Карточках |
|
Плотность бумаги |
|
| Максимальная | 210 |
| Минимальная | 60 |
Факс |
|
Цветной |
|
Телефон |
|
Спикерфон |
|
Проводная трубка |
|
АОН |
|
Автоответчик |
|
Caller ID |
|
Стандарт DECT |
|
Беспроводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
| PostScript 2 |
|
| PPDS |
|
| PCL 5e |
|
| PCL 6 |
|
| PostScript |
|
| PostScript 3 |
|
| PCL 5c |
|
|
|
|
Количество установленных шрифтов |
|
| PCL | 93 |
| PostScript | 137 |
Лотки |
|
Подача бумаги |
|
| Максимальная | 1 600 |
| Стандартная | 600 |
Вывод бумаги |
|
| Максимальный | 600 |
| Стандартный | 250 |
Финишер |
|
Брошюровщик |
|
Степлер |
|
Сортер |
|
Интерфейсы |
|
LPT |
|
USB |
|
Ethernet (RJ-45) |
|
Веб-интерфейс |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Bluetooth |
|
Инфракрасный порт |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
Память/Процессор |
|
Частота процессора |
867 |
Макс, объем памяти |
1 024 |
Процессор |
Freescale PowerPC 7748 |
Объем памяти |
256 |
Дополнительная информация |
|
Экран |
|
Поддержка ОС |
|
| DOS |
|
| Windows |
|
| Mac OS |
|
| Linux |
|
Потребляемая мощность |
|
| При работе | 750 |
| В режиме ожидания | 20 |
Габариты |
|
Ширина |
420 |
Вес |
44 |
Высота |
420 |
Глубина |
526 |
Модули
MANUAL FEED SECTION
FUSING UNIT
P-H FRAME SECTION
TRANSFER BELT UNIT
WASTE TONER TRANSPORT SECTION 2
VERTICAL TRANSPORT UNIT 2
I-C RAIL SECTION
WASTE TONER TRANSPORT SECTION
ELECTRICAL COMPONENTS
MAIN FRAME SECTION
VERTICAL TRANSPORT UNIT
DRIVE SECTION 3
DRIVE SECTION 2
500 SHEET TRAY UNIT
EXTERNAL PARTS
DRIVE SECTION
I-C CONTACT SECTION
Детали DRIVE SECTION 3
| Деталь: | GUIDE |
| Парткод: | 4138 3231 02 |
| Деталь: | LEVER |
| Парткод: | 4138 3205 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | A011 5611 01 |
| Деталь: | GUIDE |
| Парткод: | A011 5613 00 |
| Деталь: | COLLAR |
| Парткод: | 4120 3019 01 |
| Деталь: | LIFTING PLATE |
| Парткод: | 4138 3251 03 |
| Деталь: | REGULATING PLATE |
| Парткод: | A011 5610 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 3234 03 |
| Деталь: | ACTUATOR |
| Парткод: | 4138 3233 13 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6835 01 |
| Деталь: | MANUAL FEED ASSY |
| Парткод: | A011 R708 00 |
| Деталь: | TRAY |
| Парткод: | 4138 3203 13 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 3252 01 |
| Деталь: | TRAY |
| Парткод: | A011 5601 00 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4138 3253 01 |
| Деталь: | LEVER |
| Парткод: | 4138 3207 01 |
| Деталь: | BUSHING |
| Парткод: | 4138 3244 01 |
| Деталь: | EARTH GROUND |
| Парткод: | 4138 3242 02 |
| Деталь: | STOPPER |
| Парткод: | 4138 3236 02 |
| Деталь: | PLATE SPRING |
| Парткод: | 4138 3237 01 |
| Деталь: | GUIDE |
| Парткод: | 4138 3204 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 3254 01 |
| Деталь: | SEPARATION ROLLER |
| Парткод: | 4034 0151 01 |
| Деталь: | SEPARATION ROLLER ASSY |
| Парткод: | A011 R715 00 |
| Деталь: | GEAR 25T |
| Парткод: | 4138 3241 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4131 3056 01 |
| Деталь: | GUIDE |
| Парткод: | 4131 3057 02 |
| Деталь: | PAPER TAKE-UP ROLLER |
| Парткод: | 4138 3032 02 |
| Деталь: | CLUTCH |
| Парткод: | 4030 3034 01 |
| Деталь: | GEAR 14T |
| Парткод: | 4138 3092 01 |
| Деталь: | FRICTION SHEET |
| Парткод: | 4138 3255 01 |
| Деталь: | FUSING UNIT 120V |
| Парткод: | A011 R713 00 |
| Деталь: | FUSING UNIT 230V |
| Парткод: | A011 R714 00 |
| Деталь: | COVER |
| Парткод: | A011 1608 00 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | HOLDER |
| Парткод: | 4138 5885 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6853 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4138 5894 01 |
| Деталь: | SET PLATE |
| Парткод: | A011 7378 01 |
| Деталь: | Neutralizing Brush |
| Парткод: | 4138 5877 01 |
| Деталь: | BUSHING |
| Парткод: | 4138 5881 01 |
| Деталь: | GUIDE |
| Парткод: | A011 7301 00 |
| Деталь: | COVER |
| Парткод: | A011 1301 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6812 01 |
| Деталь: | POWER SUPPLY |
| Парткод: | A011 M401 00 |
| Деталь: | POWER SUPPLY |
| Парткод: | A011 M400 00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4138 2103 01 |
| Деталь: | PRINTER HEAD ASSY |
| Парткод: | A011 R706 00 |
| Деталь: | SEAL |
| Парткод: | A011 1113 00 |
| Деталь: | SEAL |
| Парткод: | 4138 2064 01 |
| Деталь: | SEAL |
| Парткод: | 4138 2063 01 |
| Деталь: | SWITCH |
| Парткод: | 0993 6303 01 |
| Деталь: | COVER |
| Парткод: | A011 1303 01 |
| Деталь: | RAIL |
| Парткод: | 4138 2041 02 |
| Деталь: | PLATE NUT |
| Парткод: | 4138 2100 01 |
| Деталь: | LEVER |
| Парткод: | 4138 2084 01 |
| Деталь: | CONTACT |
| Парткод: | 4138 2205 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 2094 01 |
| Деталь: | STOP PLATE |
| Парткод: | 4138 2022 02 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 2096 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4138 2092 01 |
| Деталь: | SCREW |
| Парткод: | 4138 2098 01 |
| Деталь: | SCREW |
| Парткод: | 4163 5293 01 |
| Деталь: | COVER |
| Парткод: | A011 7004 00 |
| Деталь: | EARTH GROUND |
| Парткод: | A011 7006 00 |
| Деталь: | PHOTO SENSING ELEMENT |
| Парткод: | A011 M500 00 |
| Деталь: | GUIDE |
| Парткод: | A011 7003 00 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 3559 01 |
| Деталь: | TRANSFER BELT UNIT |
| Парткод: | A06X 011 |
| Деталь: | TRANSFER BELT UNIT |
| Парткод: | A06X 0Y1 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10Q 00 |
| Деталь: | CONTACT |
| Парткод: | 4138 2217 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4138 2113 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | RAIL |
| Парткод: | 4138 2019 02 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6840 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6839 01 |
| Деталь: | HOLDER ASSY |
| Парткод: | A011 A360 01 |
| Деталь: | SEAL |
| Парткод: | A011 3616 00 |
| Деталь: | SEAL |
| Парткод: | A011 3646 00 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | ACTUATOR |
| Парткод: | 4138 3072 01 |
| Деталь: | RAIL |
| Парткод: | A011 1107 00 |
| Деталь: | RAIL |
| Парткод: | A011 1106 00 |
| Деталь: | REINFORCE PLATE |
| Парткод: | A011 1109 00 |
| Деталь: | Waste Toner Bottle |
| Парткод: | A06X 013 |
| Деталь: | Waste Toner Bottle |
| Парткод: | A06X 0Y3 |
| Деталь: | HOLDER ASSY |
| Парткод: | A011 A110 00 |
| Деталь: | SCREW |
| Парткод: | 4106 2063 01 |
| Деталь: | HOLDER ASSY |
| Парткод: | A011 A120 00 |
| Деталь: | GEAR 19T |
| Парткод: | A011 3608 00 |
| Деталь: | STOP RING |
| Парткод: | 0910 3620 01 |
| Деталь: | BRACKET |
| Парткод: | 4138 3071 02 |
| Деталь: | HOLDER |
| Парткод: | 4138 3542 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 3543 01 |
| Деталь: | STOPPER |
| Парткод: | 4109 5530 01 |
| Деталь: | SET PLATE |
| Парткод: | 4138 3514 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 3531 02 |
| Деталь: | ROLLER |
| Парткод: | 4138 3521 02 |
| Деталь: | ROLLER |
| Парткод: | 4138 3522 03 |
| Деталь: | SOLID STATE SWITCH |
| Парткод: | 9335 1910 21 |
| Деталь: | TENSION SPRING |
| Парткод: | 4138 3533 01 |
| Деталь: | BUSHING |
| Парткод: | 4138 3523 01 |
| Деталь: | LEVER |
| Парткод: | 4138 3551 02 |
| Деталь: | ROLL |
| Парткод: | 4138 3528 02 |
| Деталь: | GEAR 20T |
| Парткод: | 4138 3524 01 |
| Деталь: | GEAR 15T |
| Парткод: | 4138 3525 02 |
| Деталь: | BUSHING |
| Парткод: | 4138 3532 02 |
| Деталь: | EARTH GROUND |
| Парткод: | 4138 3530 01 |
| Деталь: | SPACER |
| Парткод: | A011 7001 00 |
| Деталь: | CLUTCH |
| Парткод: | A011 M200 00 |
| Деталь: | LEVER |
| Парткод: | 4138 3552 02 |
| Деталь: | TRANSFER ROLLER |
| Парткод: | A06X 012 |
| Деталь: | TRANSFER ROLLER |
| Парткод: | A06X 0Y2 |
| Деталь: | WASHER |
| Парткод: | 4138 7001 00 |
| Деталь: | SHIELD |
| Парткод: | A011 1305 00 |
| Деталь: | CONNECTOR PIN |
| Парткод: | 4136 6751 01 |
| Деталь: | COVER |
| Парткод: | A011 1310 00 |
| Деталь: | BRACKET |
| Парткод: | A011 1304 01 |
| Деталь: | SEAL |
| Парткод: | A011 1115 00 |
| Деталь: | RAIL |
| Парткод: | A011 1103 02 |
| Деталь: | EARTH GROUND |
| Парткод: | 4138 2246 01 |
| Деталь: | PWB ASSY |
| Парткод: | 4138 0104 02 |
| Деталь: | COVER |
| Парткод: | A011 1322 00 |
| Деталь: | SCREW |
| Парткод: | 4106 2063 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | LABEL IC POSITION |
| Парткод: | 4138 7303 01 |
| Деталь: | LABEL PU INSERTION TARGET |
| Парткод: | A011 9401 00 |
| Деталь: | COVER |
| Парткод: | 4138 2088 02 |
| Деталь: | LEVER |
| Парткод: | 4138 2089 03 |
| Деталь: | PROTECTION |
| Парткод: | A011 1116 01 |
| Деталь: | RAIL |
| Парткод: | A011 1102 01 |
| Деталь: | RAIL |
| Парткод: | A011 1101 01 |
| Деталь: | COVER |
| Парткод: | A011 3622 01 |
| Деталь: | SEAL |
| Парткод: | A011 3626 00 |
| Деталь: | BUSHING ASSY |
| Парткод: | A011 A361 00 |
| Деталь: | SCREW |
| Парткод: | A011 3618 00 |
| Деталь: | GEAR 16T |
| Парткод: | A011 3603 00 |
| Деталь: | BUSHING |
| Парткод: | 4004 5339 01 |
| Деталь: | PIN |
| Парткод: | 1067 2501 01 |
| Деталь: | SEAL |
| Парткод: | A011 3642 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A011 3621 00 |
| Деталь: | SHUTTER |
| Парткод: | A011 3634 00 |
| Деталь: | SHUTTER |
| Парткод: | A011 3633 00 |
| Деталь: | HOLDER |
| Парткод: | A011 3627 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A011 3631 00 |
| Деталь: | COUPLING |
| Парткод: | A011 3628 00 |
| Деталь: | JOINT |
| Парткод: | A011 3629 00 |
| Деталь: | GEAR 14T |
| Парткод: | A011 3611 00 |
| Деталь: | GEAR 16T |
| Парткод: | A011 3604 00 |
| Деталь: | GEAR 16/20T |
| Парткод: | A011 3606 00 |
| Деталь: | GEAR 17T |
| Парткод: | A011 3607 00 |
| Деталь: | STOP RING |
| Парткод: | 1372 2808 02 |
| Деталь: | WASTE TONER DRAWING UP ASSY |
| Парткод: | A011 R707 00 |
| Деталь: | HOLDER |
| Парткод: | A011 3643 01 |
| Деталь: | MEMBER |
| Парткод: | A011 3648 00 |
| Деталь: | COVER |
| Парткод: | 4138 2238 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10U 00 |
| Деталь: | PWB ASSY |
| Парткод: | A011 H001 08 |
| Деталь: | BRACKET |
| Парткод: | 4138 2230 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6834 01 |
| Деталь: | HV TRANSFORMER |
| Парткод: | A011 M402 12 |
| Деталь: | SHIELD |
| Парткод: | A011 1315 00 |
| Деталь: | SCREW |
| Парткод: | 4106 2063 01 |
| Деталь: | COVER |
| Парткод: | 4138 2256 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6844 01 |
| Деталь: | BRACKET |
| Парткод: | 4138 2240 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4138 6830 01 |
| Деталь: | HV TRANSFORMER |
| Парткод: | A011 M403 01 |
| Деталь: | BRACKET |
| Парткод: | 4138 2207 02 |
| Деталь: | SHIELD BOX |
| Парткод: | A011 1332 00 |
| Деталь: | BRACKET |
| Парткод: | A011 1306 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N100 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N111 00 |
| Деталь: | BRACKET |
| Парткод: | A011 1331 00 |
| Деталь: | FERRITE CORE |
| Парткод: | A011 M700 01 |
| Деталь: | PWB ASSY |
| Парткод: | A011 M711 00 |
| Деталь: | PWB ASSY |
| Парткод: | A011 H012 01 |
| Деталь: | COVER |
| Парткод: | 4138 2239 01 |
| Деталь: | SEAL |
| Парткод: | A011 1637 00 |
| Деталь: | BRACKET |
| Парткод: | 4138 2232 01 |
| Деталь: | SEAL |
| Парткод: | A011 1031 00 |
| Деталь: | PAWL |
| Парткод: | 4138 2093 02 |
| Деталь: | BRACKET |
| Парткод: | A011 1006 01 |
| Деталь: | PROTECTION |
| Парткод: | 4138 2107 01 |
| Деталь: | PAWL |
| Парткод: | 4138 1029 01 |
| Деталь: | SCREW |
| Парткод: | 4106 2063 01 |
| Деталь: | GUIDE |
| Парткод: | A011 1311 00 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4138 2078 01 |
| Деталь: | RAIL |
| Парткод: | 4138 2034 02 |
| Деталь: | SPACER |
| Парткод: | 4138 2111 01 |
| Деталь: | RUBBER FOOT |
| Парткод: | 4128 2019 01 |
| Деталь: | RAIL |
| Парткод: | 4138 3005 02 |
| Деталь: | BRACKET |
| Парткод: | 4138 3008 01 |
| Деталь: | SEAL |
| Парткод: | 4138 2110 01 |
| Деталь: | Vertical Transport Assy |
| Парткод: | A011 R709 00 |
| Деталь: | COVER |
| Парткод: | A011 1609 01 |
| Деталь: | COVER |
| Парткод: | A011 7002 00 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 3511 02 |
| Деталь: | PAWL |
| Парткод: | 4138 3506 01 |
| Деталь: | COVER |
| Парткод: | 4138 3513 02 |
| Деталь: | RESISTOR |
| Парткод: | 9455 8076 01 |
| Деталь: | EARTH GROUND |
| Парткод: | 4138 3566 01 |
| Деталь: | SHAFT |
| Парткод: | 4138 3510 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 3512 01 |
| Деталь: | STOPPER |
| Парткод: | 4138 3503 02 |
| Деталь: | EARTH GROUND |
| Парткод: | 4138 3567 01 |
| Деталь: | BRACKET |
| Парткод: | 4138 3505 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4138 3563 03 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | GUIDE |
| Парткод: | 4138 3504 01 |
| Деталь: | PLATE SPRING |
| Парткод: | 4138 3571 01 |
| Деталь: | NETURALIZING MEMBER |
| Парткод: | 4138 3570 02 |
| Деталь: | GUIDE |
| Парткод: | 4138 3515 01 |
| Деталь: | RESISTOR |
| Парткод: | 9455 1076 01 |
| Деталь: | GUIDE |
| Парткод: | A011 7007 00 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 3564 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10C 00 |
| Деталь: | PLATE SPRING |
| Парткод: | 4138 3568 01 |
| Деталь: | PLATE SPRING |
| Парткод: | 4138 3569 02 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4131 4052 01 |
| Деталь: | LABEL JAM FUSING |
| Парткод: | 4138 7301 01 |
| Деталь: | PAWL |
| Парткод: | 4138 3507 01 |
| Деталь: | BRACKET |
| Парткод: | A011 1313 01 |
| Деталь: | FAN MOTOR |
| Парткод: | A011 M104 00 |
| Деталь: | DUCT |
| Парткод: | A011 1308 01 |
| Деталь: | WASTE TONER DRIVE ASSY |
| Парткод: | A011 R701 00 |
| Деталь: | GEAR 30T |
| Парткод: | A011 3600 00 |
| Деталь: | GEAR 14T |
| Парткод: | A011 3639 00 |
| Деталь: | GEAR 28T |
| Парткод: | A011 3601 00 |
| Деталь: | GEAR 15T |
| Парткод: | A011 3602 00 |
| Деталь: | GEAR 17/17T |
| Парткод: | A011 3610 00 |
| Деталь: | GEAR 17T |
| Парткод: | A011 3609 00 |
| Деталь: | GEAR 17T |
| Парткод: | A011 3632 00 |
| Деталь: | GEAR |
| Парткод: | A011 2123 01 |
| Деталь: | JOINT |
| Парткод: | 4138 5406 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 5412 02 |
| Деталь: | TOSION SPRING |
| Парткод: | A011 2122 00 |
| Деталь: | GEAR 30T |
| Парткод: | A011 2121 00 |
| Деталь: | GEAR 30T |
| Парткод: | 4138 5404 01 |
| Деталь: | GEAR 45/96T |
| Парткод: | 4138 5403 01 |
| Деталь: | GEAR 22/108T |
| Парткод: | 4138 5402 01 |
| Деталь: | HOPPER DRIVE ASSY |
| Парткод: | A011 R704 00 |
| Деталь: | HEAT SINK |
| Парткод: | 4138 5414 01 |
| Деталь: | MOTOR |
| Парткод: | 9314 1300 41 |
| Деталь: | WASHER |
| Парткод: | 4131 4128 01 |
| Деталь: | TORSION SPRING |
| Парткод: | A011 2129 00 |
| Деталь: | Brushless motor |
| Парткод: | A011 M100 00 |
| Деталь: | brushless Motor /20 |
| Парткод: | A011 M101 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10T 00 |
| Деталь: | Brushless motor /30 |
| Парткод: | A011 M102 01 |
| Деталь: | BUSHING |
| Парткод: | 4036 4730 01 |
| Деталь: | CLUTCH |
| Парткод: | A011 M200 00 |
| Деталь: | GEAR 17 50T |
| Парткод: | 4138 2551 01 |
| Деталь: | GEAR 28T |
| Парткод: | A011 2114 00 |
| Деталь: | GEAR 58T |
| Парткод: | A011 2113 00 |
| Деталь: | RATCHET |
| Парткод: | 4138 2570 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 2571 01 |
| Деталь: | GEAR 26T |
| Парткод: | 4138 2543 01 |
| Деталь: | LEVER |
| Парткод: | 4138 2572 01 |
| Деталь: | TENSION SPRING |
| Парткод: | 4138 2573 01 |
| Деталь: | SCREW |
| Парткод: | 4106 2063 01 |
| Деталь: | BUSHING |
| Парткод: | 4138 2600 02 |
| Деталь: | GEAR 19T |
| Парткод: | 4138 2523 01 |
| Деталь: | GEAR 27T |
| Парткод: | 4138 2534 01 |
| Деталь: | GEAR 21 66T |
| Парткод: | 4138 2584 01 |
| Деталь: | GEAR 40T |
| Парткод: | A011 2106 00 |
| Деталь: | SEAL |
| Парткод: | A011 1035 00 |
| Деталь: | MAIN DRIVE ASSY |
| Парткод: | A011 R702 00 |
| Деталь: | PAPER TAKE-UP DRIVE ASSY |
| Парткод: | A011 R703 00 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4138 3122 02 |
| Деталь: | GUIDE |
| Парткод: | 4138 3124 01 |
| Деталь: | GUIDE |
| Парткод: | 4138 3125 01 |
| Деталь: | GUIDE |
| Парткод: | 4138 3126 01 |
| Деталь: | FRICTION SHEET |
| Парткод: | 0978 3811 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4138 3121 02 |
| Деталь: | SEPARATION ROLLER ASSY |
| Парткод: | A011 R716 00 |
| Деталь: | SEPARATION ROLLER |
| Парткод: | 4034 0151 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 3254 01 |
| Деталь: | BUSHING |
| Парткод: | 4131 3003 01 |
| Деталь: | LEVER |
| Парткод: | 4138 3043 01 |
| Деталь: | TENSION SPRING |
| Парткод: | 4498 3404 01 |
| Деталь: | COVER |
| Парткод: | A011 5600 00 |
| Деталь: | HANDLE |
| Парткод: | 4138 3003 01 |
| Деталь: | LABEL PAPER STACK |
| Парткод: | 4138 3082 01 |
| Деталь: | LABEL |
| Парткод: | 4138 7305 01 |
| Деталь: | LEVER |
| Парткод: | 4138 3161 02 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4131 3056 01 |
| Деталь: | GUIDE |
| Парткод: | 4131 3057 02 |
| Деталь: | PLATE SPRING |
| Парткод: | 4138 3146 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 3142 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4138 3123 02 |
| Деталь: | LIFTING PLATE |
| Парткод: | 4138 3141 03 |
| Деталь: | SHAFT |
| Парткод: | 4138 3031 01 |
| Деталь: | PLATE SPRING |
| Парткод: | 4138 3145 01 |
| Деталь: | CLUTCH |
| Парткод: | 4030 3034 01 |
| Деталь: | PAPER TAKE-UP ROLLER |
| Парткод: | 4138 3032 02 |
| Деталь: | CASSETTE ASSY |
| Парткод: | A011 R710 00 |
| Деталь: | REAR COVER |
| Парткод: | A011 1611 02 |
| Деталь: | RIGHT COVER |
| Парткод: | 4138 1003 02 |
| Деталь: | DOOR |
| Парткод: | 4138 1024 01 |
| Деталь: | COVER |
| Парткод: | A011 1632 01 |
| Деталь: | TOP COVER |
| Парткод: | A011 1601 02 |
| Деталь: | COVER |
| Парткод: | A011 1634 00 |
| Деталь: | TOP COVER |
| Парткод: | A011 1631 00 |
| Деталь: | SEAL |
| Парткод: | A011 1603 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N121 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N120 04 |
| Деталь: | CONTROL PANEL ASSY |
| Парткод: | A011 M713 00 |
| Деталь: | TOP COVER |
| Парткод: | A011 1625 01 |
| Деталь: | GUIDE |
| Парткод: | A011 1605 00 |
| Деталь: | LABEL I/C SET |
| Парткод: | A011 9412 00 |
| Деталь: | FRONT COVER |
| Парткод: | A011 1606 00 |
| Деталь: | LABEL bizhub C30P |
| Парткод: | A011 9453 00 |
| Деталь: | FRONT COVER |
| Парткод: | A011 1604 03 |
| Деталь: | LABEL LOGO MARK |
| Парткод: | 4030 7500 01 |
| Деталь: | SEAL |
| Парткод: | A011 1635 00 |
| Деталь: | MEMBER |
| Парткод: | A011 1638 00 |
| Деталь: | COVER |
| Парткод: | 4138 1020 02 |
| Деталь: | REINFORCE PLATE |
| Парткод: | A011 1630 01 |
| Деталь: | LEVER |
| Парткод: | 4138 1034 02 |
| Деталь: | CLEANING PAD |
| Парткод: | 4138 2018 02 |
| Деталь: | CLANING MATERIAL |
| Парткод: | A011 1901 00 |
| Деталь: | HANDLE |
| Парткод: | 4138 1019 02 |
| Деталь: | HINGE |
| Парткод: | A011 1618 01 |
| Деталь: | SEAL |
| Парткод: | A011 1636 00 |
| Деталь: | COVER |
| Парткод: | A011 1633 01 |
| Деталь: | LEFT COVER |
| Парткод: | A011 1607 00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4138 1032 01 |
| Деталь: | GEAR 17T |
| Парткод: | 4138 3582 01 |
| Деталь: | CAM |
| Парткод: | 4138 3553 01 |
| Деталь: | HUMIDITY CONVERTION EL. |
| Парткод: | 9372 5300 11 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1100 31 |
| Деталь: | STOPPER |
| Парткод: | 4470 4024 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 3562 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4138 3561 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4138 3560 02 |
| Деталь: | SCREW |
| Парткод: | 4106 2063 01 |
| Деталь: | DRIVE ASSY |
| Парткод: | A011 R705 00 |
| Деталь: | BUSHING |
| Парткод: | 4036 4730 01 |
| Деталь: | CLUTCH |
| Парткод: | 9322 1300 61 |
| Деталь: | LEVER |
| Парткод: | 4138 3589 01 |
| Деталь: | TENSION SPRING |
| Парткод: | 4138 2573 01 |
| Деталь: | MICRO SWITCH |
| Парткод: | 9J06 M601 00 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138 2252 02 |
| Деталь: | GEAR 24T |
| Парткод: | 4138 3556 01 |
| Деталь: | GEAR 18/25T |
| Парткод: | 4138 3584 01 |
| Деталь: | GEAR 19/44T |
| Парткод: | 4138 3583 01 |
| Деталь: | COVER |
| Парткод: | A011 1114 00 |
| Деталь: | SOLID STATE SWITCH |
| Парткод: | 9335 1400 51 |
| Деталь: | RAIL |
| Парткод: | A011 1108 00 |
| Деталь: | SEAL |
| Парткод: | 4138 2105 01 |
| Деталь: | SEAL |
| Парткод: | 4138 2106 01 |
| Деталь: | HOLDER |
| Парткод: | A011 4601 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4138 2236 02 |
| Деталь: | HOLDER |
| Парткод: | A011 4600 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A011 4604 00 |
| Деталь: | HOLDER |
| Парткод: | 4002 3123 03 |
| Деталь: | SEAL |
| Парткод: | 4138 2056 01 |
| Деталь: | DUCT |
| Парткод: | 4138 2055 01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10P 00 |
| Деталь: | SWITCH(DETECT) |
| Парткод: | 9332 3710 11 |
| Деталь: | LEVER |
| Парткод: | 4138 3060 02 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10W 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10X 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A011 N10Y 00 |
| Деталь: | DUCT |
| Парткод: | 4138 2057 01 |
| Деталь: | SCREW |
| Парткод: | 4106 2063 01 |
| Деталь: | OZONE FILTER |
| Парткод: | 4138 0758 00 |
| Деталь: | SEAL |
| Парткод: | 4138 2117 01 |
| Деталь: | SCREW |
| Парткод: | 4120 4614 01 |
| Деталь: | FAN MOTOR |
| Парткод: | 9313 1300 51 |
| Деталь: | COVER |
| Парткод: | A011 4603 00 |
| Деталь: | CONTACT |
| Парткод: | 4138 2226 01 |
| Деталь: | CONTACT |
| Парткод: | 4138 2224 01 |
| Деталь: | CONTACT |
| Парткод: | 4138 2225 01 |
| Деталь: | HOLDER |
| Парткод: | A011 4602 00 |
Коды ошибок
0010
0017
0018
001B
0046
004C
004E
0060
0094
0096
0300
0310
0500
0501
0510
0511
0520
0521
0B30
0B47
0B48
0B4A
0B4C
0BA0
0BE1
0F52
0F53
0F54
0F55
133B
13C0
13E2
13E3
3C00
3C10
3FFB
C002
C003
C013
C015
C025
C026
C027
C050
C051
C052
C053
C060
C071
FFFF
Описание
| Error code: | 0010 |
| Display: | P MOTOR 1 |
| Description: | Network I/F Initialize has not been completed. |
| Causes: | Network I/F does not work correctly. Firmware for Network I/F is not installed. |
| Remedy: | Check the firmware is installed into Network I/F. Main Board replacement |
| Error code: | 0017 |
| Display: | P MOTOR 2 |
| Description: | Intermediate transport motor malfunction • The intermediate transport motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the intermediate transport motor is being rotated. |
| Causes: | • Transport motor (M2) • Printer control board (PRCB) |
| Remedy: | 1 Check the M3 connector for proper connection and correct as necessary. 2 Check M3 for proper drive coupling and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 M3 operation check MFPB PJ27MFPB-3 to 7 C-5. 5 Change M3. 6 Change MFPB. 7 Change DCPU. |
| Error code: | 0018 |
| Display: | D MOTOR 2 |
| Description: | Color PC Drum Motor’s failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning. |
| Causes: | • Developing motor (M1) • Printer control board (PRCB) |
| Remedy: | 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the connector of motor for proper drive coupling and correct as necessary. 3 Check the PWB-M connector for proper connection and correct as necessary. 4 M2 operation check PWB-M CNDM3-5 (REM) PWB-M CNDM3-8 (LOCK) C-23. 5 Change PWB-M. |
| Error code: | 001B |
| Display: | Toner rack failure CODE (001B) Turn power off, on |
| Description: | Toner Rack Failure |
| Causes: | • Rack Positioning Sensor, PL5.1.12 • Engine Control Board, PL13.0.20 |
| Remedy: | 1 Check the Rack Motor connector P/J5 on the Engine Control Board. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Check the Engine Control Board connector P/J5. Is the connector seated properly? Go to step 3. Reseat the connector. If the problem persists, go to step 3. 3 Check the Rack Positioning Sensor at PJ5-11. Is the sensor on? Go to step 4. Replace the sensor. If the problem persists, go to step 4. 4 Replace the Engine Control Board. Complete. |
| Error code: | 0046 |
| Display: | FUSER FAN |
| Description: | Fusing Cooling Fan Motor/1’s failure to turn • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary. |
| Causes: | Fusing cooling fan motor (FM1) Print control board (PRCB) |
| Remedy: | 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M11 operation check PWB-M CNDM1-12 (ON) PWB-M CNDM1-14 (LOCK) K to L-1 to 2. 4 Change PWB-M. |
| Error code: | 004C |
| Display: | Exhaust fan failure CODE (004C) Turn power off, on |
| Description: | Exhaust Fan Failure The Ventilation Fan Motor does not rotate evenly even after the lapse of a given period of time while it is starting. |
| Causes: | • Ventilation Fan Motor, PL7.2.20 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check the Engine Control Board connector P/J16. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Check the operation of the Ventilation Fan Motor. Is the motor faulty? Replace the motor. If the problem persists, go to step 5. Go to step 5. 3 On the Engine Control Board, check for +24 VDC at P/J2-1, 5, and 7. Check for +5 VDC at P/J2-2. Are the voltages present and within specification? Go to step 4. Replace the Power Supply. If the problem persists, go to step 4. 4 Replace the Engine Control Board. Complete. |
| Error code: | 004E |
| Display: | LVPS fan failure CODE (004E) Turn power off, on |
| Description: | LVPS Fan Failure • The Power Supply Cooling Fan Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the Power Supply Cooling Fan Motor is being rotated. |
| Causes: | • Power Supply Cooling Fan Motor, PL12.0.11 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check the High Voltage Board connectors CN1 and CN2, and the Engine Control Board connector P/J17. Are the connectors seated properly? Go to step 2. Reseat the connector(s). If the problem persists, go to step 2. 2 Check the Power Supply Cooling Fan Motor control signals at CN2. Are the signals operating correctly? Replace the motor. If the problem persists, go to step 3. Go to step 3. 3 Check the Power Supply Cooling Fan Motor control signals at PJ17 on the Engine Control Board. Are the control signals operating correctly? Replace the High Voltage Board. If the problem persists, go to step 4. Go to step 4. 4 On the Engine Control Board, check for +24 VDC at P/J2-1, 5, and 7. Check for +5 VDC at P/J2-2. Are the voltages present and within specification? Go to step 5. Replace the Power Supply. If the problem persists, go to step 5. 5 Replace the Engine Control Board. Complete. |
| Error code: | 0060 |
| Display: | FUSER MOTOR |
| Description: | Engine PWB mismatch Unmatching engine and engine sub boards. Defective engine subboard |
| Causes: | Defective engine sub PWB. |
| Remedy: | Engine PWB 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Replace the engine PWB. |
| Error code: | 0094 |
| Display: | Trans. roll failure CODE (0094) Turn power off, on |
| Description: | Transfer Roll Failure Possible causes: • The 2nd Image Transfer Retraction Position Sensor(PS3) is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started. • The 2nd Image Transfer Retraction Position Sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started. |
| Causes: | • 2nd Image Transfer Retraction Position Sensor (PS3), PL4.0.9 • 2nd Image Transfer Retraction Position Solenoid (SD4), PL7.2.23 • Main Motor, PL9.1.6 • Engine Control Board, PL13.0.20 |
| Remedy: | 1 Check the Main Motor connector CN37. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Check the Main Motor for proper drive coupling and correct as necessary. Does the problem persist? Go to step 3. Complete. 3 Check the 2nd Image Transfer Retraction Position Solenoid connector CN5. Is the connector seated properly? Go to step 4. Reseat the connector. If the problem persists, go to step 4. 4 Check the 2nd Image Transfer Retraction Position Solenoid for proper drive coupling and correct as necessary. Does the problem persist? Go to step 5. Complete. 5 Check the 2nd Image Transfer Retraction Position Sensor control signal for a voltage change at P/J12-3 on the Engine Control Board. Is the signal operating correctly? Go to step 6. Replace the Engine Control Board. If the problem persists, go to step 6. 6 Replace the 2nd Image Transfer Retraction Position Solenoid. Does the problem persist? Go to step 7. Complete. 7 Replace the 2nd Image Transfer Retraction Position Sensor. Complete. |
| Error code: | 0096 |
| Display: | XFER DETACH 1 |
| Description: | Transfer Belt Separation • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn ON (Retracting) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is retracting. • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn OFF (Pressuring) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is pressuring. |
| Causes: | • 1st transfer pressure sensor (PS17) • Transport motor (M2) • 1st transfer pressure solenoid (SD1) • Printer control board (PRCB) |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 PC6 I/O check, Sensor check 3 CL3 operation check PWB-M CNDM1-11 (ON) K to L-2. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M. |
| Error code: | 0300 |
| Display: | POLYGON MOTOR |
| Description: | Polygon motor malfunction |
| Causes: | • The polygon motor does not rotate evenly even after the lapse of a given period of time after it has been started. • The motor lock signal remains HIGH for a given period of consecutive time while the polygon motor is being rotated. |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PH unit. - - 3 Change PRCB. - - |
| Error code: | 0310 |
| Display: | LASER ERROR |
| Description: | Laser malfunction |
| Causes: | • The SOS signal is not detected within a given period of time after the output of the laser has been started. |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PH unit. - - 3 Change PRCB. - - |
| Error code: | 0500 |
| Display: | FUSER ERROR |
| Description: | Fuser warm-up failure |
| Causes: | • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started. |
| Remedy: | 1 Change fuser unit. - - 2 For C110: 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. ROTATE TONER key -ATTENTION key - ATTENTION key - ROTATE TONER key. 4. Main switch is turned OFF/ON. For C130n: 1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. See P.103 - - 3 Change PRCB. - - 4 Change DCPU. - - |
| Error code: | 0501 |
| Display: | FUSER ERROR |
| Description: | Fusing Pressure Roller warm-up failure • The Fusing Pressure Roller Thermistor/1 (TH2) fails to raise a given degree of temperature even after the lapse of a given period of time after the Fusing Pressure Heater Lamp (H3) is turned ON. • The detected temperature of the Fusing Pressure Roller Thermistor/1 (TH2) is lower for a given level of degree than one of the Heating Roller Thermistor/1 (TH1) after the Front Door is opened or closed, the Main Power Switch is turned ON or TROUBLE RESET is implemented. |
| Causes: | 1 Connection failure of the center or side thermistor harness of the fuser unit 2 Connection failure of the heater harness of the fuser unit 3 Harness connection failure of the eject sensor PCB 4 Harness connection failure of the low-voltage power supply PCB 5 Eject sensor PCB failure 6 Fuser unit failure 7 Low-voltage power supply PCB failure 8 Main PCB failure |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-M and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-M. 5 Change PU1. |
| Error code: | 0510 |
| Display: | Fuser failure CODE (0510) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0510 Fuser Failure The temperature detected by the thermistor remains lower than expected for a given period of time or longer. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0511 |
| Display: | FUSER ERROR |
| Description: | Abnormally low Fusing Pressure Roller temperature • The temperature of the Fusing Pressure Roller Thermistor /1 (TH2) is lower than a given level of degree for 1 second or more uninterruptedly during Ready mode, Low Power mode or printing. |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-M and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-M. 5 Change PU1. |
| Error code: | 0520 |
| Display: | Fuser failure CODE (0520) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0520 Fuser Failure The temperature detected by the thermistor remains higher than expected for a given period of time or longer. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0521 |
| Display: | FUSER ERROR |
| Description: | Abnormally high Fusing Pressure Roller temperature • The temperature of the Fusing Pressure Roller Thermistor/1 (TH2) is higher than a given level of degree for 1 second or more uninterruptedly before the Heater temperature control starts. • The temperature of the Fusing Pressure Roller Thermistor/1 (TH2) is higher than a given level of degree for 1 second or more uninterruptedly after the Heater temperature control starts. |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-M and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-M. 5 Change PU1. |
| Error code: | 0B30 |
| Display: | FINISHER ERROR |
| Description: | Finisher aligning plate drive malfunction |
| Error code: | 0B47 |
| Display: | FINISHER ERROR |
| Description: | Finisher media holding drive malfunction |
| Error code: | 0B48 |
| Display: | FINISHER ERROR |
| Description: | Finisher exit roller pressure/retraction malfunction |
| Error code: | 0B4A |
| Display: | FINISHER ERROR |
| Description: | Finisher aligning belt pressure/retraction malfunction |
| Error code: | 0B4C |
| Display: | FINISHER ERROR |
| Description: | Finisher media ejector motor malfunction |
| Error code: | 0BA0 |
| Display: | FINISHER ERROR |
| Description: | Finisher tray up/down motor ascent/descent drive malfunction |
| Error code: | 0BE1 |
| Display: | FINISHER ERROR |
| Description: | Finisher fan motor malfunction |
| Error code: | 0F52 |
| Display: | TE SENSOR Y |
| Description: | Toner level sensor /Y malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/Y (PS13) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F53 |
| Display: | TE SENSOR M |
| Description: | Toner level sensor /M malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/M (PS14) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F54 |
| Display: | TE SENSOR C |
| Description: | Toner level sensor /C malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/C (PS15) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F55 |
| Display: | TE SENSOR K |
| Description: | Toner level sensor /K malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/K (PS16) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 133B |
| Display: | FINISHERE COMMUNICATION |
| Description: | Finisher communication error • A communication error occurs between the main body and the finisher. |
| Remedy: | 1 Reboot the main body. 2 Change FSCB. 3 Change MFPB. |
| Error code: | 13C0 |
| Display: | Engine board failure CODE (13C0) Turn power off, on |
| Description: | Print Control Board Malfunction |
| Causes: | • Engine Control Board, PL13.0.20 |
| Remedy: | 1 Replace the Engine Control Board. Complete. |
| Error code: | 13E2 |
| Display: | Engine ROM failure CODE (13E2) Turn power off, on |
| Description: | Engine ROM Failure Flash ROM writing is found faulty during a check. |
| Causes: | • Engine Control Board, PL13.0.20 • Image Processor Board, PL2.0.4 |
| Remedy: | 1 Check the Engine Control Board connectors. Are the connectors seated properly? Go to step 2. Reseat the connectors. If the problem persists, go to step 2. 2 Replace the Engine Control Board. Does the problem persist? Go to step 3. Complete. 3 Replace the Image Processor Board. Complete. |
| Error code: | 13E3 |
| Display: | FLASH DEVICE |
| Description: | Flash ROM device fault • An erase error occurs during erasing of data in flash ROM. |
| Causes: | • Printer control board (PRCB) • MFP board (MFPB) |
| Remedy: | 1 Check the MFPB for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB. |
| Error code: | 3C00 |
| Display: | Eng. EEPROM failure CODE (3C00) Turn power off, on |
| Description: | Eng. EEPROM failure |
| Remedy: | Contact a Xerox representative to correct this error. |
| Error code: | 3C10 |
| Display: | Eng. EEPROM failure CODE (3C10) Turn power off, on |
| Description: | Eng. EEPROM failure |
| Remedy: | Contact a Xerox representative to correct this error. |
| Error code: | 3FFB |
| Display: | FINISHER ROM |
| Description: | Finisher flash ROM error • An error occurs with flash ROM of the optional staple finisher. |
| Remedy: | 1 Check the FSCB for proper connection and correct as necessary. 2 Change FSCB. |
| Error code: | C002 |
| Display: | RAM ERROR |
| Description: | RAM (standard) error at startup • RAM error at Standard Memory is detected during printer start-up. |
| Causes: | • MFP board (MFPB) • Standard memory |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check connection state of the extension memory and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change the extension memory. 5 Change PWB-P. |
| Error code: | C003 |
| Display: | RAM ERROR |
| Description: | Memory copy PCB 2 problem* 1 • Problems with data from memory copy PCB 2. |
| Causes: | Defective memory copy PCB 2. |
| Remedy: | Replace memory copy PCB 2 and check for correct operation. |
| Error code: | C013 |
| Display: | H/W ADDRESS |
| Description: | MAC address error at startup (MAC address is invalid) • Invalid Mac address is detected during printer start-up. |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P. |
| Error code: | C015 |
| Display: | BOOT ROM |
| Description: | Backup memory read/write problem (engine PCB) • Read and write data does not match. |
| Causes: | Defective backup RAM or engine PCB. |
| Remedy: | Replace the engine PCB and check for correct operation. |
| Error code: | C025 |
| Display: | CONTROLLER ROM |
| Description: | Controller ROM error • Lead error of destination setting file is detected during the printer starting. |
| Causes: | MFP board (MFPB) |
| Error code: | C026 |
| Display: | CONTROLLER ROM |
| Description: | Memory PCB communication problem • There is no reply after five retries at transmitting. • There is no reply after five retries at receiving. |
| Causes: | Poor contact in the connector terminals. Defective main PCB or memory PCB. |
| Remedy: | Check the connection of connector CN3 on the main PCB and the connector on memory PCB. Repair or replace if necessary. Replace the main PCB or memory PCB and check for correct operation. |
| Error code: | C027 |
| Display: | CONTROLLER ROM |
| Description: | Controller ROM error • Final check sum error is detected during the printer starting. |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P. |
| Error code: | C050 |
| Display: | HDD ERROR |
| Description: | Optional second paper feeder communication problem • Communication fails five times successively. |
| Causes: | Paper feeder installed incorrectly. Defective main PCB or drawer main PCB. |
| Remedy: | Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the main PCB or drawer main PCB and check for correct operation. |
| Error code: | C051 |
| Display: | HDD DISK FULL |
| Description: | Optional third paper feeder communication problem • Communication fails five times successively. |
| Causes: | Paper feeder installed incorrectly. Defective main PCB or drawer main PCB. |
| Remedy: | Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the main PCB or drawer main PCB and check for correct operation. |
| Error code: | C052 |
| Display: | CARD ERROR |
| Description: | Compact Flash access error • When correct access to the Compact Flash is failed during access. |
| Causes: | MFP board (MFPB) Compact flash card |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change Compact Flash. 5 Change PWB-P. |
| Error code: | C053 |
| Display: | CARD FULL |
| Description: | Compact Flash full error • Range for user space is full during access to the Compact Flash. |
| Causes: | MFP board (MFPB) Compact flash card |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Change Compact Flash. |
| Error code: | C060 |
| Display: | UPDATE ERROR |
| Description: | Detect hopping Motor lock error |
| Causes: | Hopping motor does not rotate nomary. |
| Remedy: | Power OFF/ON Turn off the Power of the printer and back on. |
| Error code: | C071 |
| Display: | H/W CONFIG ERROR |
| Description: | Hardware configuration error • An error occurs with hardware configuration (video clock etc.). |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Reboot the main body. 2 Check the PRCB connector for proper connection and correct as necessary. 3 Change PRCB. |
| Error code: | FFFF |
| Display: | I/F COMM ERROR |
| Description: | Interface Communication error • Correct communication is failed when receiving/sending the command between PWB-A and PWB-P. |
| Causes: | Print control board (PRCB) MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary 3 Check the PWB-M connector for proper connection and correct as necessary. 4 Change PWB-M. |
