Konica-Minolta bizhub C3100P
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
120000
Скорость печати
A4
31
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Цветность печати |
цветная |
Размещение |
настольный |
Число страниц в месяц |
120 000 |
Печать фотографий |
|
Копир |
|
Сканер |
|
Факс |
|
Телефон |
|
Макс. формат |
A4 |
Тип устройства |
Принтер |
Область применения |
большой офис |
Принтер |
|
Количество цветов |
4 |
Время разогрева |
39 |
Прямая печать |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Система непрерывной подачи чернил |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
| По Y | 1 200 |
| По X | 1 200 |
Скорость ч/б печати |
|
| A4 | 31 |
Время выхода первого отпечатка |
|
| Цветн, | 12,9 |
| Ч/б | 12,9 |
Сканер |
|
Стандарт WIA |
|
Слайд-адаптер |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Расходные материалы |
|
Количество картриджей |
4 |
Ресурс цветного картриджа/тонера |
5 000 |
Ресурс ч/б картриджа/тонера |
5 000 |
Печать на: |
|
| Фотобумаге |
|
| CD/DVD |
|
| Рулоне |
|
| Карточках |
|
| Глянцевой бумаге |
|
| Матовой бумаге |
|
| Пленках |
|
| Конвертах |
|
| Этикетках |
|
Плотность бумаги |
|
| Минимальная | 60 |
| Максимальная | 210 |
Факс |
|
Цветной |
|
PC Fax |
|
Телефон |
|
Спикерфон |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Автоответчик |
|
Стандарт DECT |
|
Caller ID |
|
Шрифты и языки управления |
|
Языки управления |
|
| PPDS |
|
| PCL 6 |
|
| PostScript 2 |
|
| PostScript |
|
|
|
|
| PostScript 3 |
|
| PCL 5e |
|
| PCL 5c |
|
Количество установленных шрифтов |
|
| PostScript | 137 |
| PCL | 80 |
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Максимальная | 850 |
| Стандартная | 350 |
Вывод бумаги |
|
| Стандартный | 200 |
Финишер |
|
Степлер |
|
Брошюровщик |
|
Сортировка со сдвигом |
|
Электронная сортировка |
|
Сортер |
|
Интерфейсы |
|
Ethernet (RJ-45) |
|
USB |
|
RS-232 |
|
Инфракрасный порт |
|
AirPrint |
|
LPT |
|
Bluetooth |
|
Wi-Fi 802.11n |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
Веб-интерфейс |
|
Версия USB |
2,0 |
Память/Процессор |
|
Частота процессора |
1 066 |
Макс, объем памяти |
2 048 |
Процессор |
6170 Dual Core |
Объем памяти |
1 024 |
Дополнительная информация |
|
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
| DOS |
|
| Windows |
|
| Linux |
|
| Mac OS |
|
Потребляемая мощность |
|
| При работе | 470 |
Габариты |
|
Вес |
24 |
Ширина |
447 |
Высота |
544 |
Глубина |
350 |
Модули
TRANSFER BELT UNIT
PAPER FEED DRIVE SECTION
ELECTRICAL COMPONENTS
CASSETTE SECTION
MAIN DRIVE SECTION 2
PRINT HEAD SECTION
EXTERNAL PARTS
High Voltage Section
FUSING SECTION
MAIN DRIVE SECTION
Vertical conveyance Section
TONER BOTTLE DRIVE SECTION
VERTICAL CONVEYANCE SECTION 2
POWER SUPPLY SECTION
VERTICAL CONVEYANCE SECTION 3
DUP RIVERSE DRIVE SECTION
MAIN DRIVE SECTION 3
TRANSFER GUIDE SECTION
Детали MAIN DRIVE SECTION 2
| Деталь: | HOLDER |
| Парткод: | A0VD111700 |
| Деталь: | COMPRESSING COIL SPRING |
| Парткод: | A0VD111600 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD114101 |
| Деталь: | Torsion Coil spring /Rear |
| Парткод: | A0VD110500 |
| Деталь: | TRANSFER UNIT |
| Парткод: | A1480Y1 |
| Деталь: | RAIL /FRONT |
| Парткод: | A0VD110104 |
| Деталь: | CONTACT |
| Парткод: | A0VD136800 |
| Деталь: | Torsion Coil spring /Front |
| Парткод: | A0VD110400 |
| Деталь: | Hold Holder /ASSY |
| Парткод: | A6DR134100 |
| Деталь: | RAIL |
| Парткод: | A0VD112000 |
| Деталь: | RAIL |
| Парткод: | A0VD111203 |
| Деталь: | Photoconductor Wiring |
| Парткод: | A6DRN10A00 |
| Деталь: | Holder /Front |
| Парткод: | A0VD111402 |
| Деталь: | SHUTTER |
| Парткод: | A0VD362300 |
| Деталь: | SEAL |
| Парткод: | A0VD362201 |
| Деталь: | SEAL |
| Парткод: | A0VD362400 |
| Деталь: | PULLING COIL SPRING |
| Парткод: | A0VD362500 |
| Деталь: | RAIL /REAR |
| Парткод: | A0VD110205 |
| Деталь: | DUCT |
| Парткод: | A0VD111502 |
| Деталь: | SEAL |
| Парткод: | A0VD115100 |
| Деталь: | SEAL |
| Парткод: | A0VD115301 |
| Деталь: | SEAL |
| Парткод: | A0VD115200 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0VD214700 |
| Деталь: | SEAL |
| Парткод: | A0VD363700 |
| Деталь: | PAPER FEED DRIVE ASSY |
| Парткод: | A6DRR70000 |
| Деталь: | CLUTCH |
| Парткод: | A02EM20000 |
| Деталь: | GEAR 22T |
| Парткод: | A0VD231200 |
| Деталь: | GEAR 25T |
| Парткод: | A0VD230901 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD233301 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108M50100 |
| Деталь: | LEVER |
| Парткод: | A0VD624100 |
| Деталь: | HOLDER |
| Парткод: | 4002312303 |
| Деталь: | Paperfeed Wiring |
| Парткод: | A6DRN10E00 |
| Деталь: | Guide Sheet |
| Парткод: | A3GN217000 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A6DR132800 |
| Деталь: | Paperfeed Relay harness |
| Парткод: | A6DRN10F00 |
| Деталь: | Hold Holder |
| Парткод: | A0VD136100 |
| Деталь: | AC Wiring |
| Парткод: | A6DRN10X00 |
| Деталь: | Power code |
| Парткод: | A0VDN30100 |
| Деталь: | Power code |
| Парткод: | A0VDN30000 |
| Деталь: | POWER CORD |
| Парткод: | 9381420021 |
| Деталь: | Power code |
| Парткод: | A0VDN30200 |
| Деталь: | POWER CORD |
| Парткод: | 9381430031 |
| Деталь: | Reinforce Plate /Left |
| Парткод: | A6DR133600 |
| Деталь: | ROCKER SWITCH |
| Парткод: | A034M60200 |
| Деталь: | AC Wiring |
| Парткод: | A6DRN10000 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A6DR132901 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A6DR131501 |
| Деталь: | PWB Assembly |
| Парткод: | A6DRH01004 |
| Деталь: | SEAL |
| Парткод: | A6DR133901 |
| Деталь: | LD Flatcable |
| Парткод: | A6DRN10S00 |
| Деталь: | Controller FlatCable |
| Парткод: | A6DRN10T00 |
| Деталь: | SHIELD PLATE |
| Парткод: | A6DR133402 |
| Деталь: | PWB Assembly (PRCB) |
| Парткод: | A6DRH00103 |
| Деталь: | COVER |
| Парткод: | A6DR132401 |
| Деталь: | Memory Board (JP) |
| Парткод: | A6DRR70500 |
| Деталь: | Memory Board (WW) |
| Парткод: | A6DRR70400 |
| Деталь: | BUSHING |
| Парткод: | 4138324401 |
| Деталь: | CLUTCH |
| Парткод: | 4030303401 |
| Деталь: | ROLLER |
| Парткод: | 4138303202 |
| Деталь: | ROLLER ASSY |
| Парткод: | 4658015106 |
| Деталь: | HOLDER |
| Парткод: | A0VD621100 |
| Деталь: | COMPRESSING COIL SPRING |
| Парткод: | A0VD624800 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4131305601 |
| Деталь: | GUIDE |
| Парткод: | 4131305702 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0VD623101 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0VD623200 |
| Деталь: | CASSETTE ASSY |
| Парткод: | A0VDR72522 |
| Деталь: | Label Prohibition inkjet media |
| Парткод: | 4138731601 |
| Деталь: | Cleaning Part |
| Парткод: | A0VD108902 |
| Деталь: | LOCK LEVER |
| Парткод: | A0VD622102 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 1164306201 |
| Деталь: | Brushless motor |
| Парткод: | A2YFM10200 |
| Деталь: | BEARING |
| Парткод: | A00F213900 |
| Деталь: | Mounting Plate /A |
| Парткод: | A0VD248501 |
| Деталь: | CLUTCH |
| Парткод: | A011M20000 |
| Деталь: | PIN |
| Парткод: | 4036301401 |
| Деталь: | Gear 21T |
| Парткод: | A0VD218301 |
| Деталь: | LD Relay harness |
| Парткод: | A6DRN10P01 |
| Деталь: | LD Wiring |
| Парткод: | A6DRN10N00 |
| Деталь: | PRINT HEAD ASSY |
| Парткод: | A73JR70011 |
| Деталь: | RAIL |
| Парткод: | A0VD111302 |
| Деталь: | RUBBER FOOT |
| Парткод: | 996305501 |
| Деталь: | GEAR 16T |
| Парткод: | A0VD235700 |
| Деталь: | GEAR 16T |
| Парткод: | A0VD235400 |
| Деталь: | Gear 16/26T |
| Парткод: | A0VD235600 |
| Деталь: | Gear 22/30T |
| Парткод: | A0VD235900 |
| Деталь: | GEAR 16/16T |
| Парткод: | A0VD235500 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD362702 |
| Деталь: | LEVER |
| Парткод: | A0VD362602 |
| Деталь: | Drive Holder |
| Парткод: | A0VD235101 |
| Деталь: | COVER |
| Парткод: | A0VD108703 |
| Деталь: | Hold Holder |
| Парткод: | A0VD136701 |
| Деталь: | SOLID STATE SWITCH |
| Парткод: | 9335140051 |
| Деталь: | Scatteringprevention Seal |
| Парткод: | A0VD109400 |
| Деталь: | STOPPER |
| Парткод: | A0VD107401 |
| Деталь: | Waste Toner Bottle |
| Парткод: | A1AU0Y1 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD107500 |
| Деталь: | SPACER |
| Парткод: | A0VD109001 |
| Деталь: | Cover /Right rear |
| Парткод: | A6DR160300 |
| Деталь: | Cover /Upper |
| Парткод: | A0VD160100 |
| Деталь: | TRAY |
| Парткод: | A0VD161201 |
| Деталь: | TRAY |
| Парткод: | A0VD161802 |
| Деталь: | TRAY |
| Парткод: | A0VD162000 |
| Деталь: | Cover /Upper |
| Парткод: | A6DR160601 |
| Деталь: | Cover /Upper |
| Парткод: | A6DR160800 |
| Деталь: | Cover /Upper |
| Парткод: | A6DR161000 |
| Деталь: | CONTROL HARNESS |
| Парткод: | A6DRN12000 |
| Деталь: | Cover /Right front |
| Парткод: | A0VD165501 |
| Деталь: | LABEL LOGO MARK |
| Парткод: | A00F942000 |
| Деталь: | LABEL LOGO MARK |
| Парткод: | A0VD941700 |
| Деталь: | Label bizhub C3100P |
| Парткод: | A6DR941500 |
| Деталь: | Cover /Front |
| Парткод: | A0VD165404 |
| Деталь: | SHEET |
| Парткод: | A0VD941801 |
| Деталь: | SHEET |
| Парткод: | A6DT942000 |
| Деталь: | Cover /Left |
| Парткод: | A6DR160200 |
| Деталь: | Cover /Upper |
| Парткод: | A6DR160700 |
| Деталь: | COVER |
| Парткод: | A6DR160903 |
| Деталь: | Cover /Rear |
| Парткод: | A6DR163001 |
| Деталь: | COVER |
| Парткод: | A0VD166401 |
| Деталь: | Label Emperon |
| Парткод: | A011946200 |
| Деталь: | PANEL ASSEMBLY |
| Парткод: | A6DRM71001 |
| Деталь: | PANEL ASSEMBLY |
| Парткод: | A6DRM71100 |
| Деталь: | PANEL ASSEMBLY |
| Парткод: | A6DRM71200 |
| Деталь: | LABEL |
| Парткод: | A1UD947400 |
| Деталь: | HIGH VOLTAGE UNIT |
| Парткод: | A0VDM40402 |
| Деталь: | HV Flatcable |
| Парткод: | A6DRN11100 |
| Деталь: | Duct /2 |
| Парткод: | A0VD139401 |
| Деталь: | SEAL |
| Парткод: | A0VD139500 |
| Деталь: | SHEET |
| Парткод: | A0VD134500 |
| Деталь: | Insulating sheet |
| Парткод: | A6DR134401 |
| Деталь: | COVER |
| Парткод: | A0VD166303 |
| Деталь: | GUIDE |
| Парткод: | A0VD908300 |
| Деталь: | Label Hi-Temp Caution/Jam |
| Парткод: | A3GN948300 |
| Деталь: | Label JAM |
| Парткод: | A0VD949100 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD892400 |
| Деталь: | GUIDE |
| Парткод: | A0VD908101 |
| Деталь: | PAPER EXIT ROLLER |
| Парткод: | A0VD890102 |
| Деталь: | Paper exit Roll |
| Парткод: | A3GN890302 |
| Деталь: | SPRING |
| Парткод: | A0VD890200 |
| Деталь: | ACTUATOR |
| Парткод: | A0VD907300 |
| Деталь: | LEVER |
| Парткод: | A0VD901401 |
| Деталь: | Fusing Unit (110-127V) |
| Парткод: | A148010 |
| Деталь: | Fusing Unit (220-240V) |
| Парткод: | A148022 |
| Деталь: | Fusing Unit (100V) |
| Парткод: | A148002 |
| Деталь: | Fixing Relay harness |
| Парткод: | A6DRN10H00 |
| Деталь: | FILTER |
| Парткод: | A0VD164500 |
| Деталь: | FILTER |
| Парткод: | A0VD164400 |
| Деталь: | Brushless motor |
| Парткод: | A2YFM10000 |
| Деталь: | Main body Drive harness |
| Парткод: | A6DRN10500 |
| Деталь: | COMPRESSING COIL SPRING |
| Парткод: | A0VD220300 |
| Деталь: | BUSHING |
| Парткод: | A0VD220201 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD219800 |
| Деталь: | HOLD PLATE |
| Парткод: | A0VD211303 |
| Деталь: | Manual Feed Tray Unit |
| Парткод: | A0VDR71600 |
| Деталь: | TRAY |
| Парткод: | A0VD561700 |
| Деталь: | FRICTION SHEET |
| Парткод: | 4138325501 |
| Деталь: | MANUAL PAPER FEED ASSY |
| Парткод: | A0VDR71300 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD561301 |
| Деталь: | GUIDE |
| Парткод: | A0VD561800 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4131305601 |
| Деталь: | ROLLER |
| Парткод: | 4138303202 |
| Деталь: | CLUTCH |
| Парткод: | 4030303401 |
| Деталь: | COMPRESSING COIL SPRING |
| Парткод: | A0VD624800 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108M50100 |
| Деталь: | ROLLER ASSY |
| Парткод: | 4658015106 |
| Деталь: | HOLDER |
| Парткод: | A0VD621100 |
| Деталь: | Open/close Stopper |
| Парткод: | A0VD162300 |
| Деталь: | Vertical Conveyance Assy |
| Парткод: | A6DRR70200 |
| Деталь: | Label Prohibition inkjet media |
| Парткод: | 4138731601 |
| Деталь: | Bypass Tray |
| Парткод: | A0VD560202 |
| Деталь: | TORSION SPRING |
| Парткод: | 4138325201 |
| Деталь: | STOPPER |
| Парткод: | A0VD168200 |
| Деталь: | GEAR 29T |
| Парткод: | A0VD236400 |
| Деталь: | GEAR 25T |
| Парткод: | A0VD236601 |
| Деталь: | Drive Holder |
| Парткод: | A0VD236902 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108M50100 |
| Деталь: | SHAFT |
| Парткод: | A0VD236500 |
| Деталь: | Toner bottle Drive Assy |
| Парткод: | A6DRR70100 |
| Деталь: | CLUTCH |
| Парткод: | A0VDM20000 |
| Деталь: | STOPPER |
| Парткод: | A0VD237400 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD237800 |
| Деталь: | CABLE |
| Парткод: | A6DRN12100 |
| Деталь: | MOUNTING PART |
| Парткод: | A0VD117500 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A6DR161700 |
| Деталь: | Relay Connector |
| Парткод: | A0EDM60001 |
| Деталь: | LABEL |
| Парткод: | A0VD491000 |
| Деталь: | LABEL |
| Парткод: | A0VD491100 |
| Деталь: | LABEL |
| Парткод: | A0VD491200 |
| Деталь: | LABEL |
| Парткод: | A0VD491300 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108M50100 |
| Деталь: | SHAFT |
| Парткод: | A0VD162101 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A0VD701701 |
| Деталь: | 2nd Transfer Roller |
| Парткод: | A1480Y2 |
| Деталь: | Lever /Front |
| Парткод: | A0VD163600 |
| Деталь: | Lever /Rear |
| Парткод: | A0VD163400 |
| Деталь: | GUIDE |
| Парткод: | A0VD161600 |
| Деталь: | ACTUATOR |
| Парткод: | A0VD700202 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD700302 |
| Деталь: | FAN MOTOR |
| Парткод: | 4139M10000 |
| Деталь: | Cooling Duct |
| Парткод: | A6DR102200 |
| Деталь: | Toner Detection harness |
| Парткод: | A6DRN10200 |
| Деталь: | Protection Cover |
| Парткод: | A121104101 |
| Деталь: | Detecting Part |
| Парткод: | A0VD135512 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108M50100 |
| Деталь: | Hold Holder |
| Парткод: | A0VD135317 |
| Деталь: | Adjusting Spring |
| Парткод: | A0VD135201 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD135402 |
| Деталь: | MICRO SWITCH |
| Парткод: | 9J06M60100 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A0VDM50200 |
| Деталь: | DC Power source harness |
| Парткод: | A6DRN10100 |
| Деталь: | DC Power source (100-127V) |
| Парткод: | A6DRM40001 |
| Деталь: | DC Power source (220-240V) |
| Парткод: | A6DRM40101 |
| Деталь: | FRAME |
| Парткод: | A6DR130100 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A6DR103001 |
| Деталь: | SEAL |
| Парткод: | A121102600 |
| Деталь: | SEAL |
| Парткод: | A0VD139700 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | A108R90000 |
| Деталь: | Wiring Guide /1 |
| Парткод: | A2YF138501 |
| Деталь: | SHEET |
| Парткод: | A2YF139000 |
| Деталь: | SPACER |
| Парткод: | V502010021 |
| Деталь: | DUP Transport Assy |
| Парткод: | A0VDR71722 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108M50100 |
| Деталь: | GEAR 16T |
| Парткод: | A0VD235301 |
| Деталь: | ROLL |
| Парткод: | 4138352802 |
| Деталь: | BUSHING |
| Парткод: | A0VD702300 |
| Деталь: | BUSHING |
| Парткод: | 4138353202 |
| Деталь: | PULLING COIL SPRING |
| Парткод: | A0VD702501 |
| Деталь: | ROLLER |
| Парткод: | A3GN702100 |
| Деталь: | ROLLER |
| Парткод: | A0VD702902 |
| Деталь: | LEVER |
| Парткод: | A0VD704700 |
| Деталь: | GEAR 32T |
| Парткод: | A0VD704400 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A034563800 |
| Деталь: | Gear 35/42T |
| Парткод: | A0VD704300 |
| Деталь: | GEAR 35T |
| Парткод: | A0VD705101 |
| Деталь: | GEAR 15T |
| Парткод: | A0VD703001 |
| Деталь: | PULLING COIL SPRING |
| Парткод: | A0VD703700 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0VD705303 |
| Деталь: | CLUTCH |
| Парткод: | A011M20000 |
| Деталь: | GEAR 20T |
| Парткод: | A0VD703501 |
| Деталь: | GEAR 28T |
| Парткод: | A0VD704900 |
| Деталь: | BUSHING |
| Парткод: | A0VD702400 |
| Деталь: | GEAR 18T |
| Парткод: | A0VD705200 |
| Деталь: | SEAL |
| Парткод: | A034220100 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A034213400 |
| Деталь: | PAPERFEED SOLENOID |
| Парткод: | A034M20000 |
| Деталь: | FAN MOTOR |
| Парткод: | 9313130051 |
| Деталь: | Gear 23T |
| Парткод: | A0VD822800 |
| Деталь: | GEAR 19T |
| Парткод: | A0VD822700 |
| Деталь: | Torque limiter ASSY |
| Парткод: | A3GN823500 |
| Деталь: | Cooling Wiring |
| Парткод: | A6DRN10K00 |
| Деталь: | Conveyance Wiring |
| Парткод: | A6DRN10R00 |
| Деталь: | GEAR 18T |
| Парткод: | A0VD822400 |
| Деталь: | CLUTCH |
| Парткод: | A0VDM20000 |
| Деталь: | ROLL |
| Парткод: | A0VD820200 |
| Деталь: | Reverse/exit Roller |
| Парткод: | A0VD820103 |
| Деталь: | GUIDE |
| Парткод: | A0VD825600 |
| Деталь: | GUIDE |
| Парткод: | A0VD891401 |
| Деталь: | Paper exit Holder |
| Парткод: | A6DR891000 |
| Деталь: | Paper exit Holder |
| Парткод: | A6DR895500 |
| Деталь: | Paper exit Holder |
| Парткод: | A6DR890500 |
| Деталь: | Gear 38/40T |
| Парткод: | A0VD890800 |
| Деталь: | Neutralizing Brush |
| Парткод: | A0VD894100 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD820800 |
| Деталь: | DUP Reverse Drive Assy |
| Парткод: | A0VDR71800 |
| Деталь: | GEAR 14T |
| Парткод: | A0VD821100 |
| Деталь: | Guide /Upper |
| Парткод: | A0VD820403 |
| Деталь: | Guide /Lower |
| Парткод: | A0VD820501 |
| Деталь: | CONTACT |
| Парткод: | A0VD820900 |
| Деталь: | SPACER |
| Парткод: | A6DR819900 |
| Деталь: | Brushless motor |
| Парткод: | A2YFM10200 |
| Деталь: | GUIDE |
| Парткод: | A0VD706400 |
| Деталь: | CONTACT |
| Парткод: | A0VD706300 |
| Деталь: | Photo sensing |
| Парткод: | A0VDM50000 |
| Деталь: | HOLDER |
| Парткод: | A0VD706500 |
| Деталь: | Sensor Wiring |
| Парткод: | A6DRN10D00 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD706203 |
| Деталь: | COVER |
| Парткод: | A0VD706102 |
| Деталь: | Sensor Wiring |
| Парткод: | A6DRN10C00 |
| Деталь: | HUMIDITY SENSOR |
| Парткод: | A0VDM50100 |
| Деталь: | GUIDE |
| Парткод: | A6DT707300 |
| Деталь: | TORSION COIL SPRING |
| Парткод: | A0VD707201 |
| Деталь: | ACTUATOR |
| Парткод: | A6DT707100 |
| Деталь: | PHOTOINTERRUPTER |
| Парткод: | A108M50100 |
| Деталь: | GUIDE |
| Парткод: | A0VD707503 |
| Деталь: | Timing Roller Guide |
| Парткод: | A6DTR70200 |
Коды ошибок
0010
0017
0018
004A
004E
0094
0096
0101
0300
0310
0315
0500
0502
0503
0510
0520
0F52
0F53
0F54
0F55
13C4
13C5
13C6
13C7
13CB
13CC
13CD
13CE
13DD
13E2
13E3
13F0
4092
C002
C003
C013
C015
C025
C026
C027
C050
C051
C060
D093
D3A2
D3F1
D3F4
Описание
| Error code: | 0010 |
| Display: | P MOTOR 1 |
| Description: | Network I/F Initialize has not been completed. |
| Causes: | Network I/F does not work correctly. Firmware for Network I/F is not installed. |
| Remedy: | Check the firmware is installed into Network I/F. Main Board replacement |
| Error code: | 0017 |
| Display: | P MOTOR 2 |
| Description: | Intermediate transport motor malfunction • The intermediate transport motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the intermediate transport motor is being rotated. |
| Causes: | • Transport motor (M2) • Printer control board (PRCB) |
| Remedy: | 1 Check the M3 connector for proper connection and correct as necessary. 2 Check M3 for proper drive coupling and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 M3 operation check MFPB PJ27MFPB-3 to 7 C-5. 5 Change M3. 6 Change MFPB. 7 Change DCPU. |
| Error code: | 0018 |
| Display: | D MOTOR 2 |
| Description: | Color PC Drum Motor’s failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning. |
| Causes: | • Developing motor (M1) • Printer control board (PRCB) |
| Remedy: | 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the connector of motor for proper drive coupling and correct as necessary. 3 Check the PWB-M connector for proper connection and correct as necessary. 4 M2 operation check PWB-M CNDM3-5 (REM) PWB-M CNDM3-8 (LOCK) C-23. 5 Change PWB-M. |
| Error code: | 004A |
| Display: | Duplex fan failure CODE (004A) Turn power off, on |
| Description: | Duplex Unit Fan Failure The Duplex Unit Fan Motor lock signal remains HIGH for a predetermined consecutive period of time while the cooling fan motor remains energized. |
| Causes: | • Engine Control Board, PL13.0.20 • Duplex Unit, PL14.1 |
| Remedy: | 1 Check the Engine Control Board connector P/J21. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Replace the Engine Control Board. Does the problem persist? Go to step 3. Complete. 3 Replace the Duplex Unit. Complete. |
| Error code: | 004E |
| Display: | LVPS fan failure CODE (004E) Turn power off, on |
| Description: | LVPS Fan Failure • The Power Supply Cooling Fan Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the Power Supply Cooling Fan Motor is being rotated. |
| Causes: | • Power Supply Cooling Fan Motor, PL12.0.11 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check the High Voltage Board connectors CN1 and CN2, and the Engine Control Board connector P/J17. Are the connectors seated properly? Go to step 2. Reseat the connector(s). If the problem persists, go to step 2. 2 Check the Power Supply Cooling Fan Motor control signals at CN2. Are the signals operating correctly? Replace the motor. If the problem persists, go to step 3. Go to step 3. 3 Check the Power Supply Cooling Fan Motor control signals at PJ17 on the Engine Control Board. Are the control signals operating correctly? Replace the High Voltage Board. If the problem persists, go to step 4. Go to step 4. 4 On the Engine Control Board, check for +24 VDC at P/J2-1, 5, and 7. Check for +5 VDC at P/J2-2. Are the voltages present and within specification? Go to step 5. Replace the Power Supply. If the problem persists, go to step 5. 5 Replace the Engine Control Board. Complete. |
| Error code: | 0094 |
| Display: | Trans. roll failure CODE (0094) Turn power off, on |
| Description: | Transfer Roll Failure Possible causes: • The 2nd Image Transfer Retraction Position Sensor(PS3) is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started. • The 2nd Image Transfer Retraction Position Sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started. |
| Causes: | • 2nd Image Transfer Retraction Position Sensor (PS3), PL4.0.9 • 2nd Image Transfer Retraction Position Solenoid (SD4), PL7.2.23 • Main Motor, PL9.1.6 • Engine Control Board, PL13.0.20 |
| Remedy: | 1 Check the Main Motor connector CN37. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Check the Main Motor for proper drive coupling and correct as necessary. Does the problem persist? Go to step 3. Complete. 3 Check the 2nd Image Transfer Retraction Position Solenoid connector CN5. Is the connector seated properly? Go to step 4. Reseat the connector. If the problem persists, go to step 4. 4 Check the 2nd Image Transfer Retraction Position Solenoid for proper drive coupling and correct as necessary. Does the problem persist? Go to step 5. Complete. 5 Check the 2nd Image Transfer Retraction Position Sensor control signal for a voltage change at P/J12-3 on the Engine Control Board. Is the signal operating correctly? Go to step 6. Replace the Engine Control Board. If the problem persists, go to step 6. 6 Replace the 2nd Image Transfer Retraction Position Solenoid. Does the problem persist? Go to step 7. Complete. 7 Replace the 2nd Image Transfer Retraction Position Sensor. Complete. |
| Error code: | 0096 |
| Display: | XFER DETACH 1 |
| Description: | Transfer Belt Separation • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn ON (Retracting) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is retracting. • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn OFF (Pressuring) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is pressuring. |
| Causes: | • 1st transfer pressure sensor (PS17) • Transport motor (M2) • 1st transfer pressure solenoid (SD1) • Printer control board (PRCB) |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 PC6 I/O check, Sensor check 3 CL3 operation check PWB-M CNDM1-11 (ON) K to L-2. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M. |
| Error code: | 0101 |
| Display: | MAINTENANCE CALL 0101 |
| Description: | Limit Position Initialize in the Service Mode has not been done. |
| Causes: | Limit Position Initialize has not been done. Limit Position Initialize is ended before it is completed. |
| Remedy: | Complete Limit Position Initialize correctly. |
| Error code: | 0300 |
| Display: | POLYGON MOTOR |
| Description: | Polygon motor malfunction |
| Causes: | • The polygon motor does not rotate evenly even after the lapse of a given period of time after it has been started. • The motor lock signal remains HIGH for a given period of consecutive time while the polygon motor is being rotated. |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PH unit. - - 3 Change PRCB. - - |
| Error code: | 0310 |
| Display: | LASER ERROR |
| Description: | Laser malfunction |
| Causes: | • The SOS signal is not detected within a given period of time after the output of the laser has been started. |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PH unit. - - 3 Change PRCB. - - |
| Error code: | 0315 |
| Description: | PH board communication error • Mismatching of data being written and read occurs continuously for certain times during communication with the PH board. • The EEPROM of the PH board is not yet initialized. |
| Causes: | • Front door sensor (PS10) • Right door sensor (PS11) • Front door switch (SW2) • Right door switch (SW3) • DC power supply (DCPU) • Printer control board (PRCB) • MFP board (MFPB) • PH unit |
| Remedy: | 1 Check the connector between PRCB CN18-relay CN63-PH unit for proper connection and correct as necessary. 2 Replace the PH unit. 3 Replace PRCB. |
| Error code: | 0500 |
| Display: | FUSER ERROR |
| Description: | Fuser warm-up failure |
| Causes: | • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started. |
| Remedy: | 1 Change fuser unit. - - 2 For C110: 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. ROTATE TONER key -ATTENTION key - ATTENTION key - ROTATE TONER key. 4. Main switch is turned OFF/ON. For C130n: 1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. See P.103 - - 3 Change PRCB. - - 4 Change DCPU. - - |
| Error code: | 0502 |
| Display: | Thermistor failure CODE (0502) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0502 Thermistor Failure The temperature detected by the thermistor does not reach an expected level after the warm-up cycle starts. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0503 |
| Display: | TERMISTOR2 |
| Description: | Thermistor resistance failure |
| Causes: | • The difference between the temperature detected by thermistor/1 and that detected by thermistor/2 exceeds a predetermined value. |
| Remedy: | 1 Change fuser unit. - - 2 For C110: 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. ROTATE TONER key -ATTENTION key - ATTENTION key - ROTATE TONER key. 4. Main switch is turned OFF/ON. For C130n: 1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. See P.103 - - 3 Change PRCB. - - 4 Change DCPU. - - |
| Error code: | 0510 |
| Display: | Fuser failure CODE (0510) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0510 Fuser Failure The temperature detected by the thermistor remains lower than expected for a given period of time or longer. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0520 |
| Display: | Fuser failure CODE (0520) Turn power off, on |
| Description: | 0502 Thermistor Failure, 0510 Fuser Failure, and 0520 Fuser Failure 0520 Fuser Failure The temperature detected by the thermistor remains higher than expected for a given period of time or longer. |
| Causes: | • Fuser, PL4.0.13 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check that the Fuser is installed correctly. Does the problem persist? Go to step 2. Complete. 2 Check the Engine Control Board connectors P/J2, P/J3, and P/J6. Are the connectors seated properly? Go to step 3 Reseat the connectors. If the problem persists, go to step 3. 3 Check the Low Voltage Power Supply connectors CN3, CN5, and CN7. Are the connectors seated properly? Go to step 4. Reseat the connectors. If the problem persists, go to step 4. 4 Replace the Fuser (8-9). Does the problem persist? Go to step 5. Complete. 5 Replace the Engine Control Board. Does the problem persist? Go to step 6. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0F52 |
| Display: | TE SENSOR Y |
| Description: | Toner level sensor /Y malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/Y (PS13) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F53 |
| Display: | TE SENSOR M |
| Description: | Toner level sensor /M malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/M (PS14) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F54 |
| Display: | TE SENSOR C |
| Description: | Toner level sensor /C malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/C (PS15) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 0F55 |
| Display: | TE SENSOR K |
| Description: | Toner level sensor /K malfunction • An error occurs on the toner level sensor board (TLSB). |
| Causes: | • Toner level sensor/K (PS16) • Printer control board (PRCB) |
| Remedy: | 1 Check the TLSB and MFPB for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB. |
| Error code: | 13C4 |
| Description: | Imaging unit/C new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set. |
| Causes: | • Imaging unit/C • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB. |
| Error code: | 13C5 |
| Description: | Imaging unit/M new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set. |
| Causes: | • Imaging unit/M • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB. |
| Error code: | 13C6 |
| Description: | Imaging unit/Y new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set. |
| Causes: | • Imaging unit/Y • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB. |
| Error code: | 13C7 |
| Description: | Imaging unit/K new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set. |
| Causes: | • Imaging unit/K • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB. |
| Error code: | 13CB |
| Description: | Toner cartridge/C new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set. |
| Causes: | • Toner cartridge/C • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB. |
| Error code: | 13CC |
| Description: | Toner cartridge/M new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set. |
| Causes: | • Toner cartridge/M • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB. |
| Error code: | 13CD |
| Description: | Toner cartridge/Y new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set. |
| Causes: | • Toner cartridge/Y • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB. |
| Error code: | 13CE |
| Description: | Toner cartridge/K new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set. |
| Causes: | • Toner cartridge/K • Printer control board (PRCB) |
| Remedy: | 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB. |
| Error code: | 13DD |
| Display: | Initial toner failed CODE (13DD) Replace toner Contact Xerox for unit exchange |
| Description: | Initial Toner Failure The printer determines that an initial toner cartridge has been installed. The printer is programmed to only use initial toner cartridges one time. |
| Remedy: | Install a Xerox Standard or High Capacity cartridge. |
| Error code: | 13E2 |
| Display: | Engine ROM failure CODE (13E2) Turn power off, on |
| Description: | Engine ROM Failure Flash ROM writing is found faulty during a check. |
| Causes: | • Engine Control Board, PL13.0.20 • Image Processor Board, PL2.0.4 |
| Remedy: | 1 Check the Engine Control Board connectors. Are the connectors seated properly? Go to step 2. Reseat the connectors. If the problem persists, go to step 2. 2 Replace the Engine Control Board. Does the problem persist? Go to step 3. Complete. 3 Replace the Image Processor Board. Complete. |
| Error code: | 13E3 |
| Display: | FLASH DEVICE |
| Description: | Flash ROM device fault • An erase error occurs during erasing of data in flash ROM. |
| Causes: | • Printer control board (PRCB) • MFP board (MFPB) |
| Remedy: | 1 Check the MFPB for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB. |
| Error code: | 13F0 |
| Display: | ENGINE ERR |
| Description: | Engine control failure |
| Causes: | • An undefined malfunction occurs in the engine section (PRCB, etc.). |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PRCB. - - 3 Change MFPB. |
| Error code: | 4092 |
| Description: | I/F communication error (CNT detection) The communication between the MFPB and PRCB can not be completed even when elapsed a given period of time. |
| Causes: | • MFP board (MFPB) • Printer control board (PRCB)ntrol |
| Remedy: | 1 Reboot the machine. - - 2 Check the flat cable between MFPB CN16C-PRCB CN4 for proper connection and correct as necessary. - - 3 Check the connected portion of the flat cable for any curled pattern or any scratches, and replace it if necessary. - - 4 Replace MFPB 5 Replace PRCB |
| Error code: | C002 |
| Display: | RAM ERROR |
| Description: | RAM (standard) error at startup • RAM error at Standard Memory is detected during printer start-up. |
| Causes: | • MFP board (MFPB) • Standard memory |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check connection state of the extension memory and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change the extension memory. 5 Change PWB-P. |
| Error code: | C003 |
| Display: | RAM ERROR |
| Description: | Memory copy PCB 2 problem* 1 • Problems with data from memory copy PCB 2. |
| Causes: | Defective memory copy PCB 2. |
| Remedy: | Replace memory copy PCB 2 and check for correct operation. |
| Error code: | C013 |
| Display: | H/W ADDRESS |
| Description: | MAC address error at startup (MAC address is invalid) • Invalid Mac address is detected during printer start-up. |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P. |
| Error code: | C015 |
| Display: | BOOT ROM |
| Description: | Backup memory read/write problem (engine PCB) • Read and write data does not match. |
| Causes: | Defective backup RAM or engine PCB. |
| Remedy: | Replace the engine PCB and check for correct operation. |
| Error code: | C025 |
| Display: | CONTROLLER ROM |
| Description: | Controller ROM error • Lead error of destination setting file is detected during the printer starting. |
| Causes: | MFP board (MFPB) |
| Error code: | C026 |
| Display: | CONTROLLER ROM |
| Description: | Memory PCB communication problem • There is no reply after five retries at transmitting. • There is no reply after five retries at receiving. |
| Causes: | Poor contact in the connector terminals. Defective main PCB or memory PCB. |
| Remedy: | Check the connection of connector CN3 on the main PCB and the connector on memory PCB. Repair or replace if necessary. Replace the main PCB or memory PCB and check for correct operation. |
| Error code: | C027 |
| Display: | CONTROLLER ROM |
| Description: | Controller ROM error • Final check sum error is detected during the printer starting. |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P. |
| Error code: | C050 |
| Display: | HDD ERROR |
| Description: | Optional second paper feeder communication problem • Communication fails five times successively. |
| Causes: | Paper feeder installed incorrectly. Defective main PCB or drawer main PCB. |
| Remedy: | Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the main PCB or drawer main PCB and check for correct operation. |
| Error code: | C051 |
| Display: | HDD DISK FULL |
| Description: | Optional third paper feeder communication problem • Communication fails five times successively. |
| Causes: | Paper feeder installed incorrectly. Defective main PCB or drawer main PCB. |
| Remedy: | Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the main PCB or drawer main PCB and check for correct operation. |
| Error code: | C060 |
| Display: | UPDATE ERROR |
| Description: | Detect hopping Motor lock error |
| Causes: | Hopping motor does not rotate nomary. |
| Remedy: | Power OFF/ON Turn off the Power of the printer and back on. |
| Error code: | D093 |
| Description: | Wrong hard disk (found during a disk check) • A hard disk intended for another model is mounted. • The hard disk capacity is short. |
| Causes: | • MFP board (MFPB) • Hard disk |
| Remedy: | 1 Replace the hard disk. - - 2 Format hard disk. |
| Error code: | D3A2 |
| Description: | Counter error A write error occurs in the counter area. |
| Causes: | MFP board (MFPB) |
| Remedy: | 1 Check the MFPB for its mounting condition and correct any faulty condition. 2 Replace MFPB 3 If the same trouble code persists after the abovementioned procedures, the EEPROM is probably damaged. |
| Error code: | D3F1 |
| Description: | Occur:The drum counter is over the life limit, and detect toner empty. |
| Remedy: | Push the ONLINE SW when change the new Image Drum. |
| Error code: | D3F4 |
| Description: | Occur:The drum counter is over the life limit, and detect toner empty. |
| Remedy: | Auto reset when change the new drum. |
