Konica-Minolta magicolor 2430DL

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

35000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Размещение	настольный
Цветность печати	цветная
Тип	лазерный/светодиодный
Технология печати	лазерная
Телефон
Копир
Сканер
Печать фотографий
Факс
Число страниц в месяц	35 000
Область применения	малый офис
Макс. формат	A4
Тип устройства	Принтер
Принтер
Количество цветов	4
Печать без полей
Пигментные чернила
Двусторонняя печать
Прямая печать
Время разогрева	49
Макс, разрешение для ч/б печати
По Y	600
По X	2 400
Скорость ч/б печати
A4	20
Время выхода первого отпечатка
Ч/б	12
Сканер
Стандарт WIA
Отправка изображения по e-mail
Стандарт TWAIN
Скорость сканирования
Цветн,	21
Расходные материалы
Ресурс цветного картриджа/тонера	4 500
Ресурс ч/б картриджа/тонера	4 500
Количество картриджей	4
Печать на:
CD/DVD
Фотобумаге
Карточках
Рулоне
Матовой бумаге
Глянцевой бумаге
Этикетках
Пленках
Конвертах
Плотность бумаги
Максимальная	163
Минимальная	60
Факс
Цветной
Телефон
Стандарт DECT
Caller ID
АОН
Спикерфон
Беспроводная трубка
Проводная трубка
Автоответчик
Языки управления
PostScript
PostScript 2
PostScript 3
Лотки
Подача бумаги
Максимальная	700
Стандартная	200
Вывод бумаги
Стандартный	200
Финишер
Электронная сортировка
Сортер
Брошюровщик
Степлер
Сортировка со сдвигом
Интерфейсы
Устройство для чтения карт памяти
USB
Ethernet (RJ-45)
Веб-интерфейс
RS-232
Инфракрасный порт
LPT
Bluetooth
Wi-Fi
FireWire (IEEE 1394)
Версия USB	2,0
Память/Процессор
Частота процессора	130
Процессор	Special ASIC
Макс, объем памяти	544
Объем памяти	32
Дополнительная информация
Экран
Мин. системные требования
Поддержка ОС
Linux
DOS
Mac OS
Windows
Уровень шума
При работе	53
Габариты
Вес	20
Глубина	341
Ширина	395
Высота	430

Модули

FUSING SECTION

LEFT FRAME

TRANSFER ROLLER SECTION

TOP COVER

ELECTRICAL COMPONENTS

PAPER TAKE-UP SECTION

TRANSFER SECTION

VERTICAL TRANSPORT SECTION

MAIN FRAME

PH Section

EXTERNAL PARTS

RIGHT FRAME

DRIVE SECTION

Детали DRIVE SECTION

Деталь:	GEAR 16T
Парткод:	4139 2540 01

Деталь:	GEAR 19T
Парткод:	4139 2539 01

Деталь:	SHAFT
Парткод:	4139 2598 03

Деталь:	DRUM
Парткод:	4139 4106 24

Деталь:	TORSION SPRING
Парткод:	4139 4104 03

Деталь:	GEAR 108T
Парткод:	4139 2530 01

Деталь:	Gear 31T
Парткод:	4139 2518 01

Деталь:	GEAR 25/42T
Парткод:	4139 2517 01

Деталь:	GEAR 60T
Парткод:	4139 2508 01

Деталь:	GEAR 15/90T
Парткод:	4139 2509 01

Деталь:	GEAR 19T
Парткод:	4139 2521 01

Деталь:	TORSION SPRING
Парткод:	4139 2123 01

Деталь:	LEVER
Парткод:	4139 2121 01

Деталь:	BRACKETASSY
Парткод:	4139 0206 02

Деталь:	SOLENOID
Парткод:	9321 2400 11

Деталь:	CAM
Парткод:	4139 4103 13

Деталь:	GEAR 20T
Парткод:	4139 2520 01

Деталь:	RATCHET
Парткод:	4139 4105 03

Деталь:	MOTOR
Парткод:	9314 1400 31

Деталь:	BRACKET
Парткод:	4139 2591 04

Деталь:	HOLDER
Парткод:	4139 2541 03

Деталь:	GEAR 14/48T
Парткод:	4139 2596 01

Деталь:	GEAR 14/32T
Парткод:	4139 2597 02

Деталь:	GEAR 27/40T
Парткод:	4139 2552 01

Деталь:	CAM ASSY
Парткод:	A00V R721 00

Деталь:	MOTOR
Парткод:	9314 2400 11

Деталь:	BRACKET ASSY
Парткод:	4139 0205 03

Деталь:	SOLENOID
Парткод:	9321 2400 21

Деталь:	GEAR 20/117T
Парткод:	4139 2504 01

Деталь:	DRUM
Парткод:	4139 2512 01

Деталь:	RATCHET
Парткод:	4139 2514 01

Деталь:	TORSION SPRING
Парткод:	4139 2513 01

Деталь:	GEAR 24T
Парткод:	4139 2511 01

Деталь:	GEAR 24T
Парткод:	4139 2516 01

Деталь:	SHAFT
Парткод:	4139 2524 02

Деталь:	GEAR 52T
Парткод:	4139 2510 01

Деталь:	GEAR 14/33T
Парткод:	4139 2519 01

Деталь:	GEAR 20/117T
Парткод:	4139 2506 01

Деталь:	GEAR 91T
Парткод:	4139 2505 01

Деталь:	SHAFT
Парткод:	4139 2603 02

Деталь:	TENSION SPRING
Парткод:	4131 2621 01

Деталь:	GEAR 24T
Парткод:	4139 2602 01

Деталь:	BALL BEARING
Парткод:	4131 2607 01

Деталь:	LEVER
Парткод:	4139 2604 01

Деталь:	GEAR 35T
Парткод:	4139 2606 01

Деталь:	STAY
Парткод:	4139 2608 02

Деталь:	BRACKET
Парткод:	4139 2601 01

Деталь:	MOTOR
Парткод:	9314 1400 21

Деталь:	GEAR 20/73T
Парткод:	4139 2607 01

Деталь:	MOTOR
Парткод:	9314 1400 11

Деталь:	BRACKETASSY
Парткод:	4139 0201 02

Деталь:	GEAR 19/48T
Парткод:	4139 2622 01

Коды ошибок

04H

05H

08H

0BH

0CH

10H

12H

14H

15H

16H

17H

18H

19H

1AH

1BH

21H

23H

24H

29H

2AH

2BH

2CH

Деталь:	FACE SHEET READY ERROR
Парткод:	4139 1109 01

Деталь:	FACE SHEET ROTATE TONER
Парткод:	4139 1151 01

Деталь:	HUMIDITY CONVERTION EL.
Парткод:	9372 5400 11

Деталь:	REGULATING PLATE ASSY
Парткод:	4139 R706 00

Деталь:	LABEL CONSUMABLES REODER
Парткод:	4139 7332 01

Деталь:	LABEL magicolor 2430DL
Парткод:	4139 7322 01

Деталь:	LABEL magicolor 2400W
Парткод:	4139 7324 01

Error code:	04H
Description:	Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Error code:	05H
Description:	Flash ROM malfunction • Engine firmware upgrading has failed.
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Error code:	08H
Description:	Main motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the main motor remains energized. • The motor lock signal remains LOW for a predetermined consecutive period of time while the main motor remains deenergized.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1.

Деталь:	SEAL CAUTION HOT
Парткод:	4139 5580 01

Деталь:	PHOTO INTERRUPTER
Парткод:	9335 1300 61

Деталь:	EARTH GROUND
Парткод:	4139 2583 01

Error code:	0BH
Description:	Ventilation fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the ventilation fan motor remains energized.
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the FM2 connector for proper connection and correct as necessary. 2 Check FM2 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 FM2 operation check. PRCB PJ10PRCB-1 (REM) PECB PJ10PRCB-3 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1.

Error code:	0CH
Description:	Power supply cooling fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the power supply cooling fan motor remains energized.
Causes:	An error occurred in the CR motor operating sequence
Remedy:	1 Check the FM1 connector for proper connection and correct as necessary. 2 Check FM1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ4PRCB-1 (REM) PRCB PJ4PRCB-3 (LOCK) C-2. 5 Change PRCB. 6 Change DCPU1.

Error code:	10H
Description:	Polygon motor malfunction • A low motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period of time while the polygon motor remains energized.
Causes:	• CIS Unit failure • Scanner Housing failure • Main Board failure
Remedy:	1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.

Error code:	12H
Description:	Laser malfunction • The SOS signal is not detected within a predetermined period of time after the output of a laser has been started. • The SOS signal is never detected in the image area.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor driver failure (Main Board failure)
Remedy:	1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.

Error code:	14H
Description:	2nd image transfer pressure /retraction failure • The state of the retraction position sensor/2nd image transfer is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is in the unblocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is not blocked (roller in the retracted position) within a predetermined period of time after the retraction sequence of the 2nd transfer roller has been started. • The retraction position sensor/2nd image transfer is not unblocked (roller in the pressed position) within a predetermined period of time after the pressure sequence of the 2nd transfer roller has been started.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor failure • Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SD4 connector for proper connection and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 PS5 sensor check. PRCB PJ14PRCB-3 (ON) J to K-3. 6 SD4 operation check. PRCB PJ11PRCB-2 (REM) J to K-1. 7 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 8 Change PRCB.

Error code:	15H
Description:	Cleaning blade pressure /retraction failure • The state of the retraction position sensor/cleaning blade is not changed from the blocked to unblocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/cleaning blade is in the blocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/cleaning blade is not unblocked (blade in the retracted position) within a predetermined period of time after the retraction sequence of the cleaning blade has been started. • The retraction position sensor/cleaning blade is not blocked (blade in the pressed position) within a predetermined period of time after the pressure sequence of the cleaning blade has been started.
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SD3 connector for proper connection and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 PS6 sensor check. PRCB PJ9PRCB-11 (ON) C-5. 6 SD3 operation check. PRCB PJ10PRCB-5 (REM) C-3. 7 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 8 Change PRCB.

Error code:	16H
Description:	Transfer belt rotation failure • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is rotated.
Causes:	• Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object)
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 PS4 sensor check. PRCB PJ9PRCB-8 (ON) C-5. 3 Change transfer belt unit. 4 Change PRCB.

Error code:	17H
Description:	Rack rotation failure • The rack positioning sensor is in the blocked state when the rack motor remains deenergized. • The rack positioning sensor is not blocked a second time even after the lapse of a predetermined period of time after it has been blocked once while the rack motor remains energized. • The rack positioning sensor is unable to detect the deceleration control position after the lapse of a given period of time after the rack motor has started while the rack motor is turning. • The count value of the edge of ON signal of the rack positioning sensor during each developing positions are not a predetermined value while the rack motor is turning.
Remedy:	1 Check the M2 connector for proper connection and correct as necessary. 2 Check M2 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 PS3 sensor check. PRCB PJ5PRCB-11 (ON) C-6 5 M2 operation check. PRCB PJ5PRCB-1 to 4 (Pulse Output) C-6 to 7. 6 Change PRCB.

Error code:	18H
Description:	Heating roller warm-up failure • The thermistor does not detect a predetermined temperature value even after the lapse of a predetermined period of time after the current warm-up cycle has been started and the current warm-up cycle is thus not completed.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.

Error code:	19H
Description:	Abnormally low heating roller temperature • The temperature detected by the thermistor remains lower than a predetermined value for a predetermined period of time.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure)
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.

Konica-Minolta magicolor 2430DL

Общие характеристики

Размещение

Цветность печати

Тип

Технология печати

Телефон

Копир

Сканер

Печать фотографий

Факс

Число страниц в месяц

Область применения

Макс. формат

Тип устройства

Принтер

Количество цветов

Печать без полей

Пигментные чернила

Двусторонняя печать

Прямая печать

Время разогрева

Макс, разрешение для ч/б печати

Скорость ч/б печати

Время выхода первого отпечатка

Сканер

Стандарт WIA

Отправка изображения по e-mail

Стандарт TWAIN

Скорость сканирования

Расходные материалы

Ресурс цветного картриджа/тонера

Ресурс ч/б картриджа/тонера

Количество картриджей

Печать на:

Плотность бумаги

Факс

Цветной

Телефон

Стандарт DECT

Caller ID

АОН

Спикерфон

Беспроводная трубка

Проводная трубка

Автоответчик

Языки управления

Лотки

Подача бумаги

Вывод бумаги

Финишер

Электронная сортировка

Сортер

Брошюровщик

Степлер

Сортировка со сдвигом

Интерфейсы

Устройство для чтения карт памяти

USB

Ethernet (RJ-45)

Веб-интерфейс

RS-232

Инфракрасный порт

LPT

Bluetooth

Wi-Fi

FireWire (IEEE 1394)

Версия USB

Память/Процессор

Частота процессора

Процессор

Макс, объем памяти

Объем памяти

Дополнительная информация

Экран

Мин. системные требования

Поддержка ОС

Уровень шума

Габариты

Вес

Error code:	1AH
Description:	Abnormally high heating roller temperature • The temperature detected by the thermistor is a predetermined value or higher for a predetermined period of time.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor failure • Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.

Error code:	1BH
Description:	Faulty thermistor • The condition of a temperature rise of less than 1°C extends continuously for a predetermined period of time that begins when the warm-up cycle is started.
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.

Error code:	21H
Description:	Faulty OHP sensor • It is determined that the OHP sensor is faulty through a check made at the end of the predrive.
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 PS2 sensor check. PRCB PJ12PRCB-6 (ON) J to K-2. 3 Change PRCB.

Error code:	23H
Description:	Faulty waste toner near full detection board • It is determined that the LED and photo receiver are faulty through a check made when a new drum cartridge is detected.
Remedy:	1 Check the WTDTB/LED connector for proper connection and correct as necessary. 2 Check the PRCB connector for proper connection and correct as necessary. 3 Change the drum cartridge. 4 Change WTDTB/LED. 5 Change PRCB.

Error code:	24H
Description:	Faulty fusing thermistor resistor • The heater lamp remains ON for a predetermined consecutive period of time.