Konica-Minolta Magicolor 2480MF

Рейтинг

Снят с производства

Тип устройства

МФУ

Технология печати

лазерная

Макс. формат

Число страниц в месяц

35000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Число страниц в месяц	35 000
Область применения	малый офис
Тип	лазерный/светодиодный
Технология печати	лазерная
Факс
Печать фотографий
Телефон
Макс. формат	A4
Размещение	настольный
Цветность печати	цветная
Тип устройства	МФУ
Копир
Сканер
Принтер
Время разогрева	75
Прямая печать
Пигментные чернила
Двусторонняя печать
Печать без полей
Макс, разрешение для ч/б печати
По X	2 400
По Y	600
Скорость ч/б печати
A4	20
Время выхода первого отпечатка
Ч/б	12
Копир
Время выхода первой копии	25
Макс, количество копий за цикл	99
Шаг масштабирования	0,01
Значение масштаба
Минимальное	0,5
Максимальное	2
Макс, разрешение (ч/б)
По X	600
По Y	600
Скорость ч/б копирования
A4	5
Сканер
Глубина цвета	24 бит
Емкость устройства автоподачи оригиналов	50
Тип сканера	планшетный/протяжный
Устройство автоподачи оригиналов	одностороннее
Стандарт TWAIN
Стандарт WIA
Макс. формат оригинала	A4
Разрешение сканера
По Х	600
Скорость сканирования
Цветн,	21
Цветн,	23
Ч/б	10
Расходные материалы
Ресурс фотобарабана	45 000
Количество картриджей	4
Ресурс ч/б картриджа/тонера	4 500
Ресурс цветного картриджа/тонера	4 500
Печать на:
Глянцевой бумаге
Пленках
Карточках
Матовой бумаге
Конвертах
Этикетках
Рулоне
CD/DVD
Фотобумаге
Плотность бумаги
Максимальная	163
Минимальная	60
Факс
Цветной
Телефон
Caller ID
Беспроводная трубка
Спикерфон
Проводная трубка
Автоответчик
Стандарт DECT
АОН
Языки управления
PostScript
PostScript 3
PostScript 2
Лотки
Подача бумаги
Максимальная	700
Стандартная	200
Вывод бумаги
Стандартный	100
Финишер
Степлер
Брошюровщик
Сортер
Сортировка со сдвигом
Интерфейсы
Ethernet (RJ-45)
Устройство для чтения карт памяти
Веб-интерфейс
RS-232
Инфракрасный порт
LPT
Bluetooth
Wi-Fi
FireWire (IEEE 1394)
USB
Версия USB	2,0
Память/Процессор
Объем памяти	96
Дополнительная информация
Мин. системные требования	Intel Pentium II
Экран
Поддержка ОС
DOS
Linux
Mac OS
Windows
Потребляемая мощность
При работе	1 100
В режиме ожидания	250
Уровень шума
В режиме ожидания	39
При работе	57
Габариты
Вес	32
Ширина	530
Глубина	475
Высота	531

Модули

TOP COVER

ADF

TRANSFER ROLLER SECTION

DRIVE SECTION 4

ADF 2

RIGHT FRAME

PAPER TAKE-UP SECTION 3

PH Section

LEFT FRAME 2

IR SECTION 2

PAPER TAKE-UP SECTION 2

IR SECTION

TOP COVER 2

MAIN FRAME 2

VERTICAL TRANSPORT SECTION

MAIN FRAME

LEFT FRAME 3

ELECTRICAL COMPONENTS

RIGHT FRAME 2

PAPER TAKE-UP SECTION

DRIVE SECTION 2

LEFT FRAME

EXTERNAL PARTS

DRIVE SECTION 3

FUSING UNIT

TRANSFER SECTION

DRIVE SECTION

ADF 3

Детали IR SECTION 2

Деталь:	TENSION SPRING
Парткод:	4139 2253 01

Деталь:	LEVER
Парткод:	4139 2252 02

Деталь:	STOPPER
Парткод:	4139 2257 01

Деталь:	PAWL
Парткод:	4139 2243 01

Деталь:	PAWL
Парткод:	4139 2241 01

Деталь:	SHAFT
Парткод:	4139 2251 01

Деталь:	TENSION SPRING
Парткод:	4139 2249 01

Деталь:	TORSION SPRING
Парткод:	4139 2250 01

Деталь:	STOPPER
Парткод:	4139 2246 01

Деталь:	HOLDER
Парткод:	4139 2247 04

Деталь:	SHOULDER SCREW
Парткод:	4131 2320 01

Деталь:	LABEL
Парткод:	4139 7452 01

Деталь:	LEVER
Парткод:	4139 2256 03 Old

Деталь:	LEVER
Парткод:	4139 2256 04

Деталь:	SHOULDER SCREW
Парткод:	4109 2003 01

Деталь:	FAN MOTOR
Парткод:	4556 M100 00

Деталь:	SCREW
Парткод:	4556 1300 00

Деталь:	COLLAR
Парткод:	4556 1422 01

Деталь:	BUSHING
Парткод:	1132 2044 01

Деталь:	BRACKET
Парткод:	4139 1421 03

Деталь:	COVER
Парткод:	4139 2355 01

Деталь:	PHOTO INTERRUPTER
Парткод:	9335 1300 61

Деталь:	PAWL
Парткод:	4139 2242 02

Деталь:	SEAL
Парткод:	4139 1553 04

Деталь:	PIN
Парткод:	4131 2536 02

Деталь:	SHAFT
Парткод:	4139 2248 02

Деталь:	EARTH GROUND
Парткод:	1492 1118 01

Деталь:	WIRE HARNESS ASSY
Парткод:	1492 1117 01

Деталь:	CUSHION
Парткод:	4556 1601 00

Деталь:	STOPPER
Парткод:	4556 1555 01

Коды ошибок

04H

05H

08H

0BH

0CH

0FH

101H

102H

10H

12H

14H

15H

16H

17H

18H

19H

1AH

1BH

21H

23H

24H

29H

2AH

2BH

2CH

31H

F01H

Деталь:	REGULATING PLATE ASSY
Парткод:	4139 R706 00

Деталь:	Push Button Switch ASSY
Парткод:	4139 R735 00

Деталь:	LABEL COPY PROHIBITION
Парткод:	4556 9405 00

Деталь:	LABEL CONSUMABLES REODER
Парткод:	4139 7332 01

Деталь:	HUMIDITY CONVERTION EL.
Парткод:	9372 5400 11

Деталь:	LABEL magicolor 2480MF
Парткод:	4556 7322 13

Error code:	04H
Description:	Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Error code:	05H
Description:	Flash ROM malfunction • Engine firmware upgrading has failed.
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Error code:	08H
Description:	Main motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the main motor remains energized. • The motor lock signal remains LOW for a predetermined consecutive period of time while the main motor remains deenergized.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1.

Error code:	0BH
Description:	Ventilation fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the ventilation fan motor remains energized.
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the FM2 connector for proper connection and correct as necessary. 2 Check FM2 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 FM2 operation check. PRCB PJ10PRCB-1 (REM) PECB PJ10PRCB-3 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1.

Деталь:	Neutralizing Brush
Парткод:	4131 3907 01

Деталь:	SOUND SHIELD
Парткод:	4139 1433 02

Деталь:	WEIGHT
Парткод:	4980 1043 01

Error code:	0CH
Description:	Power supply cooling fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the power supply cooling fan motor remains energized.
Causes:	An error occurred in the CR motor operating sequence
Remedy:	1 Check the FM1 connector for proper connection and correct as necessary. 2 Check FM1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ4PRCB-1 (REM) PRCB PJ4PRCB-3 (LOCK) C-2. 5 Change PRCB. 6 Change DCPU1.

Error code:	0FH
Description:	Duplex cooling fan motor malfunction

Error code:	10H
Description:	Polygon motor malfunction • A low motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period of time while the polygon motor remains energized.
Causes:	• CIS Unit failure • Scanner Housing failure • Main Board failure
Remedy:	1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.

Error code:	12H
Description:	Laser malfunction • The SOS signal is not detected within a predetermined period of time after the output of a laser has been started. • The SOS signal is never detected in the image area.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor driver failure (Main Board failure)
Remedy:	1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.

Error code:	14H
Description:	2nd image transfer pressure /retraction failure • The state of the retraction position sensor/2nd image transfer is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is in the unblocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is not blocked (roller in the retracted position) within a predetermined period of time after the retraction sequence of the 2nd transfer roller has been started. • The retraction position sensor/2nd image transfer is not unblocked (roller in the pressed position) within a predetermined period of time after the pressure sequence of the 2nd transfer roller has been started.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor failure • Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SD4 connector for proper connection and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 PS5 sensor check. PRCB PJ14PRCB-3 (ON) J to K-3. 6 SD4 operation check. PRCB PJ11PRCB-2 (REM) J to K-1. 7 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 8 Change PRCB.

Error code:	15H
Description:	Cleaning blade pressure /retraction failure • The state of the retraction position sensor/cleaning blade is not changed from the blocked to unblocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/cleaning blade is in the blocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/cleaning blade is not unblocked (blade in the retracted position) within a predetermined period of time after the retraction sequence of the cleaning blade has been started. • The retraction position sensor/cleaning blade is not blocked (blade in the pressed position) within a predetermined period of time after the pressure sequence of the cleaning blade has been started.
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SD3 connector for proper connection and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 PS6 sensor check. PRCB PJ9PRCB-11 (ON) C-5. 6 SD3 operation check. PRCB PJ10PRCB-5 (REM) C-3. 7 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 8 Change PRCB.

Error code:	16H
Description:	Transfer belt rotation failure • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is rotated.
Causes:	• Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object)
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 PS4 sensor check. PRCB PJ9PRCB-8 (ON) C-5. 3 Change transfer belt unit. 4 Change PRCB.

Error code:	17H
Description:	Rack rotation failure • The rack positioning sensor is in the blocked state when the rack motor remains deenergized. • The rack positioning sensor is not blocked a second time even after the lapse of a predetermined period of time after it has been blocked once while the rack motor remains energized. • The rack positioning sensor is unable to detect the deceleration control position after the lapse of a given period of time after the rack motor has started while the rack motor is turning. • The count value of the edge of ON signal of the rack positioning sensor during each developing positions are not a predetermined value while the rack motor is turning.
Remedy:	1 Check the M2 connector for proper connection and correct as necessary. 2 Check M2 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 PS3 sensor check. PRCB PJ5PRCB-11 (ON) C-6 5 M2 operation check. PRCB PJ5PRCB-1 to 4 (Pulse Output) C-6 to 7. 6 Change PRCB.

Error code:	18H
Description:	Heating roller warm-up failure • The thermistor does not detect a predetermined temperature value even after the lapse of a predetermined period of time after the current warm-up cycle has been started and the current warm-up cycle is thus not completed.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.

Error code:	19H
Description:	Abnormally low heating roller temperature • The temperature detected by the thermistor remains lower than a predetermined value for a predetermined period of time.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure)
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.