Konica-Minolta magicolor 2500W

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

35000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Сканер
Печать фотографий
Факс
Телефон
Копир
Размещение	настольный
Макс. формат	A4
Цветность печати	цветная
Тип устройства	Принтер
Тип	лазерный/светодиодный
Область применения	малый офис
Технология печати	лазерная
Число страниц в месяц	35 000
Принтер
Прямая печать
Печать без полей
Двусторонняя печать
Время разогрева	49
Количество цветов	4
Макс, разрешение для ч/б печати
По Y	600
По X	2 400
Скорость ч/б печати
A4	20
Время выхода первого отпечатка
Ч/б	14
Цветн,	23
Сканер
Стандарт WIA
Стандарт TWAIN
Отправка изображения по e-mail
Расходные материалы
Количество картриджей	4
Ресурс ч/б картриджа/тонера	4 500
Ресурс цветного картриджа/тонера	4 500
Печать на:
Матовой бумаге
Карточках
Пленках
Этикетках
Глянцевой бумаге
Конвертах
Рулоне
Фотобумаге
CD/DVD
Плотность бумаги
Минимальная	60
Максимальная	163
Факс
Цветной
Телефон
Автоответчик
АОН
Caller ID
Беспроводная трубка
Проводная трубка
Спикерфон
Стандарт DECT
Языки управления
PostScript
Лотки
Подача бумаги
Стандартная	200
Вывод бумаги
Стандартный	200
Финишер
Электронная сортировка
Брошюровщик
Степлер
Сортер
Сортировка со сдвигом
Интерфейсы
Версия USB	2,0
USB
RS-232
FireWire (IEEE 1394)
Wi-Fi
Bluetooth
LPT
Инфракрасный порт
Устройство для чтения карт памяти
Ethernet (RJ-45)
Память/Процессор
Объем памяти	32
Дополнительная информация
Мин. системные требования
Поддержка ОС
DOS
Linux
Mac OS
Windows
Уровень шума
При работе	53
Габариты
Вес	19
Ширина	430
Высота	341
Глубина	395

Модули

RIGHT FRAME SECTION 2

LEFT FRAME SECTION

MAIN FRAME SECTION

ELECTRICAL COMPONENTS

Fusing Drive Section

PRINT HEAD SECTION

EXTERNAL PARTS

RACK DRIVE SECTION

FUSING SECTION

TOP COVER SECTION

PAPER TAKE-UP SECTION

PAPER TRANSPORT DRIVE SECTION

PAPER TAKE-UP SECTION 3

TRANSFER SECTION

VERTICAL TRANSPORT SECTION

RIGHT FRAME SECTION

2ND TRANSFER SECTION

PAPER TAKE-UP SECTION 2

Детали FUSING SECTION

Деталь:	TORSION SPRING
Парткод:	4139 5535 01

Деталь:	LEVER
Парткод:	4139 5557 02

Деталь:	ROLL
Парткод:	4139 3910 01

Деталь:	PLATE SPRING
Парткод:	4139 5586 02

Деталь:	COLLAR
Парткод:	4139 5577 01

Деталь:	THERMISTOR
Парткод:	4139 6701 03

Деталь:	BRACKET
Парткод:	4139 5534 01

Деталь:	BUSHING
Парткод:	4139 5578 02

Деталь:	ROLLER
Парткод:	4139 5576 03

Деталь:	BRACKET
Парткод:	4139 5513 02

Деталь:	BUSHING
Парткод:	4139 5516 02

Деталь:	PIN
Парткод:	4036 2549 01

Деталь:	PLATE SPRING
Парткод:	4139 5558 02

Деталь:	TORSION SPRING
Парткод:	4139 5525 02

Деталь:	LEVER
Парткод:	4139 5524 03

Деталь:	PHOTO INTERRUPTER
Парткод:	9335 1300 61

Деталь:	ACTUATOR
Парткод:	4139 5518 12

Деталь:	Fusing Unit 100V
Парткод:	A00V R701 00

Деталь:	FUSING UNIT 120V
Парткод:	A00V R702 00

Деталь:	FUSING UNIT 120V
Парткод:	A00V R722 00

Деталь:	FUSING UNIT 220-240V
Парткод:	A00V R703 00

Деталь:	FUSING UNIT 220 240V
Парткод:	A00V R723 00

Деталь:	SEAL
Парткод:	A00V 3912 00

Деталь:	GUIDE
Парткод:	4139 7200 00

Деталь:	LABEL CONSUMABLES REODER
Парткод:	4139 7332 01

Деталь:	Push Button Switch ASSY
Парткод:	4139 R735 00

Деталь:	LABEL magicolor2500W
Парткод:	A00V 9400 00

Деталь:	FRONT UPPER COVER ASSY
Парткод:	A00V R715 00

Деталь:	FRONT LOWER COVER ASSY
Парткод:	A00V R718 00

Деталь:	HUMIDITY CONVERTION EL.
Парткод:	9372 5400 11

Деталь:	REGULATING PLATE ASSY
Парткод:	4139 R707 00

Error code:	04
Display:	ERROR CONDITION PAPER OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.
Remedy:	Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration.

Error code:	05
Display:	ERROR CONDITION HEAD OPEN
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is not fully closed. The head open sensor is not working properly.
Remedy:	Replace the sensor.

Error code:	08
Display:	WARNING HEAD COLD
Description:	The printer prints while the ERROR light flashes.
Causes:	The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Деталь:	GEAR 22/64T
Парткод:	4139 2553 01

Деталь:	FRICTION SHEET
Парткод:	4136 3049 01

Деталь:	GEAR 16T
Парткод:	4139 2540 01

Деталь:	GEAR 19T
Парткод:	4139 2539 01

Error code:	0B
Description:	Transfer Fan Malfunction
Causes:	Ventilation Fan Motor (M6) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M6 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M6 operation check. PWB-A PJ10A-1 (REM) PWB-A PJ10A-3 (LOCK) 2-H 5 Change PWB-A. 6 Change PU.

Error code:	0C
Description:	Power Supply Cooling Fan Malfunction
Causes:	Power Supply Cooling Fan Motor (M4) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M4 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M4 operation check. PWB-A PJ4A-1 (REM) PWB-A PJ4A-3 (LOCK) 7-I 5 Change PWB-A. 6 Change PU.

Error code:	0F
Display:	Paper Jam
Description:	Sorter full or empty
Causes:	1 Harness connection failure of back cover sensor. 2 Back cover damaged. 3 Back cover sensor failure. 4 Main PCB failure.

Error code:	10
Display:	DEFRAGMENTING
Description:	The printer stops.
Causes:	The printer is defragmenting memory.
Remedy:	Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service.

Error code:	12
Description:	General print quality issues
Causes:	The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced.
Remedy:	For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance.

Error code:	14
Description:	Wrinkled ribbon
Causes:	Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned.
Remedy:	See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance.

Error code:	15
Description:	Printing too light or too dark over the entire label
Causes:	The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure.
Remedy:	Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70.

Error code:	16
Description:	Smudge marks on labels
Causes:	The media or ribbon is not designed for high-speed operation.
Remedy:	Replace supplies with those recommended for high-speed operation.

Error code:	17
Description:	Misregistration/skips labels
Causes:	The printer is not calibrated. Improper label format.
Remedy:	Recalibrate the printer. Use correct label format.

Error code:	18
Description:	Misregistration and misprint of one to three labels
Causes:	The platen roller is dirty. Media does not meet specifications.
Remedy:	See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications.