Konica-Minolta magicolor 2530DL

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

35000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Телефон
Печать фотографий
Макс. формат	A4
Копир
Факс
Размещение	настольный
Сканер
Цветность печати	цветная
Технология печати	лазерная
Тип	лазерный/светодиодный
Тип устройства	Принтер
Число страниц в месяц	35 000
Область применения	малый офис
Принтер
Печать без полей
Пигментные чернила
Время разогрева	49
Количество цветов	4
Прямая печать
Двусторонняя печать
Макс, разрешение для ч/б печати
По X	2 400
По Y	600
Скорость ч/б печати
A4	20
Время выхода первого отпечатка
Ч/б	12
Сканер
Отправка изображения по e-mail
Стандарт TWAIN
Стандарт WIA
Скорость сканирования
Цветн,	21
Расходные материалы
Ресурс ч/б картриджа/тонера	4 500
Ресурс цветного картриджа/тонера	4 500
Количество картриджей	4
Печать на:
Фотобумаге
Рулоне
CD/DVD
Матовой бумаге
Пленках
Карточках
Глянцевой бумаге
Этикетках
Конвертах
Плотность бумаги
Минимальная	60
Максимальная	200
Факс
Цветной
Телефон
Беспроводная трубка
Caller ID
Автоответчик
Стандарт DECT
Спикерфон
Проводная трубка
АОН
Языки управления
PostScript
PostScript 3
PostScript 2
Лотки
Подача бумаги
Максимальная	700
Стандартная	200
Вывод бумаги
Стандартный	200
Финишер
Сортировка со сдвигом
Электронная сортировка
Сортер
Брошюровщик
Степлер
Интерфейсы
RS-232
LPT
Веб-интерфейс
Bluetooth
FireWire (IEEE 1394)
Wi-Fi
Устройство для чтения карт памяти
Инфракрасный порт
Версия USB	2,0
Ethernet (RJ-45)
USB
Память/Процессор
Макс, объем памяти	576
Объем памяти	64
Процессор	ASIC
Частота процессора	130
Дополнительная информация
Экран
Мин. системные требования
Поддержка ОС
DOS
Linux
Mac OS
Windows
Потребляемая мощность
При работе	1 100
В режиме ожидания	250
Уровень шума
При работе	52
Габариты
Ширина	430
Вес	19
Глубина	395
Высота	341

Модули

Fusing Drive Section

ELECTRICAL COMPONENTS

PAPER TAKE-UP SECTION 3

VERTICAL TRANSPORT SECTION

PRINT HEAD SECTION

TRANSFER SECTION

LEFT FRAME SECTION

FUSING SECTION

RACK DRIVE SECTION

PAPER TAKE-UP SECTION

EXTERNAL PARTS

RIGHT FRAME SECTION

RIGHT FRAME SECTION 3

PAPER TAKE-UP SECTION 2

PAPER TRANSPORT DRIVE SECTION

TOP COVER SECTION

MAIN FRAME SECTION

RIGHT FRAME SECTION 2

2ND TRANSFER SECTION

Детали 2ND TRANSFER SECTION

Деталь:	SHOULDER SCREW
Парткод:	4131 3514 02

Деталь:	COLLAR
Парткод:	4139 4005 01

Деталь:	TRANSFER ROLLER
Парткод:	4139 4002 02

Деталь:	PRESSURE SPRING
Парткод:	4139 4003 02

Деталь:	GEAR 16T
Парткод:	4139 4006 02

Деталь:	HOLDER
Парткод:	4139 4007 01

Деталь:	PRESSURE SPRING
Парткод:	4139 4004 01

Деталь:	SPACER
Парткод:	4139 4009 01

Деталь:	CUSHION
Парткод:	A00V 5002 00

Деталь:	ROLL
Парткод:	4139 4112 01

Деталь:	HOLDER
Парткод:	4139 4008 01

Деталь:	CONDUCTIVE MEMBER
Парткод:	4139 4122 01

Деталь:	PRESSURE SPRING
Парткод:	4139 4019 02

Деталь:	2nd TRANSFER ASSY
Парткод:	A00V R713 00

Деталь:	REGULATING PLATE ASSY
Парткод:	4139 R706 00

Деталь:	Push Button Switch ASSY
Парткод:	4139 R735 00

Деталь:	FUSING UNIT 220-240V
Парткод:	A00V R706 00

Деталь:	FUSING UNIT 220 240V
Парткод:	A00V R725 00

Деталь:	HUMIDITY CONVERTION EL.
Парткод:	9372 5400 11

Деталь:	LABEL magicolor2530DL
Парткод:	A00V 9401 00

Деталь:	FRONT UPPER COVER ASSY
Парткод:	A00V R714 00

Деталь:	FRONT LOWER COVER ASSY
Парткод:	A00V R719 00

Деталь:	ELECTRICALLY CONDUCTIVE MATERIAL
Парткод:	4139 6751 01

Деталь:	LABEL CONSUMABLES REODER
Парткод:	4139 7332 01

Деталь:	Stepping motor
Парткод:	A00V M100 00

Деталь:	SOLENOID
Парткод:	9321 2400 11

Деталь:	TIMING BELT 134L
Парткод:	A00V 2405 00

Деталь:	PWB SUPPORT 9.53H
Парткод:	9384 1900 57

Error code:	04
Display:	ERROR CONDITION PAPER OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.
Remedy:	Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration.

Error code:	05
Display:	ERROR CONDITION HEAD OPEN
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is not fully closed. The head open sensor is not working properly.
Remedy:	Replace the sensor.

Error code:	08
Display:	WARNING HEAD COLD
Description:	The printer prints while the ERROR light flashes.
Causes:	The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	0B
Description:	Transfer Fan Malfunction
Causes:	Ventilation Fan Motor (M6) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M6 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M6 operation check. PWB-A PJ10A-1 (REM) PWB-A PJ10A-3 (LOCK) 2-H 5 Change PWB-A. 6 Change PU.

Error code:	0C
Description:	Power Supply Cooling Fan Malfunction
Causes:	Power Supply Cooling Fan Motor (M4) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M4 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M4 operation check. PWB-A PJ4A-1 (REM) PWB-A PJ4A-3 (LOCK) 7-I 5 Change PWB-A. 6 Change PU.

Error code:	0F
Display:	Paper Jam
Description:	Sorter full or empty
Causes:	1 Harness connection failure of back cover sensor. 2 Back cover damaged. 3 Back cover sensor failure. 4 Main PCB failure.

Error code:	10
Display:	DEFRAGMENTING
Description:	The printer stops.
Causes:	The printer is defragmenting memory.
Remedy:	Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service.

Error code:	12
Description:	General print quality issues
Causes:	The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced.
Remedy:	For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance.

Error code:	14
Description:	Wrinkled ribbon
Causes:	Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned.
Remedy:	See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance.

Error code:	15
Description:	Printing too light or too dark over the entire label
Causes:	The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure.
Remedy:	Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70.