Konica-Minolta magicolor 2550DN

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

35000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Копир
Факс
Сканер
Телефон
Печать фотографий
Размещение	настольный
Макс. формат	A4
Цветность печати	цветная
Тип устройства	Принтер
Число страниц в месяц	35 000
Область применения	малый офис
Технология печати	лазерная
Тип	лазерный/светодиодный
Принтер
Прямая печать
Двусторонняя печать
Пигментные чернила
Печать без полей
Количество цветов	4
Время разогрева	55
Макс, разрешение для ч/б печати
По X	600
По Y	600
Скорость ч/б печати
A4	20
Время выхода первого отпечатка
Ч/б	13
Цветн,	22
Сканер
Стандарт TWAIN
Отправка изображения по e-mail
Стандарт WIA
Расходные материалы
Количество картриджей	4
Ресурс цветного картриджа/тонера	1 500
Ресурс ч/б картриджа/тонера	1 500
Печать на:
Глянцевой бумаге
Этикетках
Пленках
Карточках
Матовой бумаге
Конвертах
CD/DVD
Рулоне
Фотобумаге
Плотность бумаги
Максимальная	200
Минимальная	60
Факс
Цветной
Телефон
АОН
Проводная трубка
Беспроводная трубка
Caller ID
Автоответчик
Стандарт DECT
Спикерфон
Шрифты и языки управления
Языки управления
PostScript 2
PPDS
PostScript 3
PostScript
PDF
PCL 5e
PCL 5c
PCL 6
Количество установленных шрифтов
PostScript	145
PCL	89
Лотки
Емкость лотка ручной подачи	200
Подача бумаги
Стандартная	200
Максимальная	700
Вывод бумаги
Стандартный	200
Финишер
Электронная сортировка
Степлер
Брошюровщик
Сортер
Интерфейсы
Ethernet (RJ-45)
LPT
USB
Веб-интерфейс
Wi-Fi
Устройство для чтения карт памяти
Bluetooth
RS-232
Инфракрасный порт
FireWire (IEEE 1394)
Версия USB	2,0
Память/Процессор
Макс, объем памяти	640
Объем памяти	256
Частота процессора	300
Процессор	Freescale MPC8220i
Дополнительная информация
Экран
Поддержка ОС
Windows
Mac OS
Linux
DOS
Потребляемая мощность
В режиме ожидания	5
При работе	600
Уровень шума
В режиме ожидания	35
При работе	52
Габариты
Ширина	430
Глубина	395
Высота	341
Вес	19,3

Модули

PRINT HEAD SECTION

PAPER TAKE-UP SECTION 3

RIGHT FRAME SECTION

2ND TRANSFER SECTION

PAPER TAKE-UP SECTION 2

RACK DRIVE SECTION

FUSING SECTION

VERTICAL TRANSPORT SECTION

DUPLEX UNIT 4

DUPLEX UNIT 3

ELECTRICAL COMPONENTS

TOP COVER SECTION

PAPER TAKE-UP SECTION

RIGHT FRAME SECTION 2

LEFT FRAME SECTION

MAIN FRAME SECTION

Fusing Drive Section

EXTERNAL PARTS

TRANSFER SECTION

Duplex Unit

PAPER TRANSPORT DRIVE SECTION

RIGHT FRAME SECTION 3

Детали PAPER TAKE-UP SECTION

Деталь:	PAPER Take-up Assy
Парткод:	A00V R707 00

Деталь:	ROLL
Парткод:	4136 3006 01

Деталь:	HOLDER
Парткод:	4136 3009 02

Деталь:	PRESSURE SPRING
Парткод:	4136 3018 01

Деталь:	FRICTION SHEET ASSY
Парткод:	4136 0151 02

Деталь:	PRESSURE SPRING
Парткод:	A00V 5700 00

Деталь:	STOPPER
Парткод:	4136 3022 01

Деталь:	LEVER
Парткод:	4139 3053 02

Деталь:	TENSION SPRING
Парткод:	4136 3027 01

Деталь:	PRESSURE SPRING
Парткод:	4139 3024 01

Деталь:	PHOTO INTERRUPTER
Парткод:	9335 1300 61

Деталь:	ACTUATOR
Парткод:	4131 3042 06

Деталь:	BRACKET
Парткод:	4139 3029 01

Деталь:	HUMIDITY CONVERTION EL.
Парткод:	9372 5400 11

Деталь:	HOLDER
Парткод:	4139 3028 02

Деталь:	BRACKET
Парткод:	4139 2301 02

Деталь:	Push Button Switch ASSY
Парткод:	4139 R735 00

Деталь:	REGULATING PLATE ASSY
Парткод:	4139 R706 00

Деталь:	FUSING UNIT 220-240V
Парткод:	A00V R706 00

Деталь:	FUSING UNIT 220 240V
Парткод:	A00V R725 00

Деталь:	ELECTRICALLY CONDUCTIVE MATERIAL
Парткод:	4139 6751 01

Деталь:	LABEL CONSUMABLES REODER
Парткод:	4139 7332 01

Деталь:	LABEL magicolor2550DN
Парткод:	A00V 9409 00

Деталь:	FRONT UPPER COVER ASSY
Парткод:	A00V R714 00

Деталь:	FRONT LOWER COVER ASSY
Парткод:	A00V R726 00

Error code:	04
Display:	ERROR CONDITION PAPER OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.
Remedy:	Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration.

Деталь:	GEAR 14T
Парткод:	4127 3104 01

Деталь:	FAN MOTOR
Парткод:	9313 1400 51

Деталь:	FAN MOTOR
Парткод:	4139 M100 00

Деталь:	MICRO SWITCH
Парткод:	9J06 M601 00

Error code:	05
Display:	ERROR CONDITION HEAD OPEN
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is not fully closed. The head open sensor is not working properly.
Remedy:	Replace the sensor.

Error code:	08
Display:	WARNING HEAD COLD
Description:	The printer prints while the ERROR light flashes.
Causes:	The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	0B
Description:	Transfer Fan Malfunction
Causes:	Ventilation Fan Motor (M6) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M6 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M6 operation check. PWB-A PJ10A-1 (REM) PWB-A PJ10A-3 (LOCK) 2-H 5 Change PWB-A. 6 Change PU.

Error code:	0C
Description:	Power Supply Cooling Fan Malfunction
Causes:	Power Supply Cooling Fan Motor (M4) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M4 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M4 operation check. PWB-A PJ4A-1 (REM) PWB-A PJ4A-3 (LOCK) 7-I 5 Change PWB-A. 6 Change PU.

Error code:	0F
Display:	Paper Jam
Description:	Sorter full or empty
Causes:	1 Harness connection failure of back cover sensor. 2 Back cover damaged. 3 Back cover sensor failure. 4 Main PCB failure.

Error code:	10
Display:	DEFRAGMENTING
Description:	The printer stops.
Causes:	The printer is defragmenting memory.
Remedy:	Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service.

Error code:	12
Description:	General print quality issues
Causes:	The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced.
Remedy:	For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance.

Error code:	14
Description:	Wrinkled ribbon
Causes:	Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned.
Remedy:	See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance.

Error code:	15
Description:	Printing too light or too dark over the entire label
Causes:	The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure.
Remedy:	Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70.

Error code:	16
Description:	Smudge marks on labels
Causes:	The media or ribbon is not designed for high-speed operation.
Remedy:	Replace supplies with those recommended for high-speed operation.