Konica-Minolta bizhub 360
Рейтинг
Модули
TONER SUPPLY UNIT 5
TONER SUPPLY UNIT 2
AUTO DUPLEX UNIT 3
TONER SUPPLY UNIT
FIXING UNIT 4
AUTO DUPLEX UNIT 5
PAPER FEED UNIT
AUTO DUPLEX UNIT 2
EXTERNAL PARTS 2
DRUM CARTRIDGE 3
DRUM CARTRIDGE 4
TURNOVER UNIT
WRITE UNIT
DEVELOPING UNIT 2
DEVELOPING SUCTION UNIT
DRIVING UNIT 2
OPTICS UNIT
FIXING UNIT 5
CHARGING UNIT
DRIVING UNIT 3
MAIN FRAME 4
MAIN FRAME 2
MAIN FRAME 3
TRANSFER SEPARATOR CORONA UNIT
TONER SUPPLY UNIT 4
AUTO DUPLEX UNIT 4
AUTO DUPLEX UNIT
CONVEYANCE UNIT
ELECTRIC PARTS 4
MANUAL FEED UNIT 3
PAPER FEED UNIT 2
DRIVING UNIT 4
OPTICS UNIT 2
PAPER FEED UNIT 4
MANUAL FEED UNIT
ELECTRIC PARTS 2
MAIN FRAME
PAPER FEED UNIT 3
MANUAL FEED UNIT 2
FIXING UNIT 3
CASSETTE
FIXING UNIT 6
AUTO DUPLEX UNIT 6
ELECTRIC PARTS
EXTERNAL PARTS
OPERATION UNIT
TURNOVER UNIT 2
TONER SUPPLY UNIT 3
DRUM CARTRIDGE 2
REGISTRATION UNIT
FIXING UNIT
DEVELOPING UNIT
FIXING UNIT 2
ELECTRIC PARTS 3
DRIVING UNIT
Детали CASSETTE
| Деталь: | TONER SUPPLY GUIDE PLATE /UPPER |
| Парткод: | 50GA 3211 1F |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | SLIDE SPRING /A |
| Парткод: | 50GA 3317 0E |
| Деталь: | DETECTION ACTUATOR |
| Парткод: | 50GA 3223 0 |
| Деталь: | FIXING RELAY WIRING |
| Парткод: | 50GA 9006 0 |
| Деталь: | TONER SUPPLY EARTH PLATE 1 |
| Парткод: | 50GA 3325 0 |
| Деталь: | COOLING COVER E |
| Парткод: | 50GA 3313 0 |
| Деталь: | FILTER MOUNTING PLATE ASSY |
| Парткод: | 50GA -336 0 |
| Деталь: | Mounting Plate /B |
| Парткод: | 50GA 3316 1E |
| Деталь: | TONER SUPPLY GUIDE RAIL/LEFT |
| Парткод: | 50GA 3303 0 |
| Деталь: | CORD MOUNTING PLATE/1 |
| Парткод: | 50GA 3324 0 |
| Деталь: | MOUNTING PLATE |
| Парткод: | 50GA 3307 1 |
| Деталь: | SCATTER PREVENTING SEAL C |
| Парткод: | 50GA 3333 0 |
| Деталь: | TONER SUPPLY GUIDE RAIL/RIGHT |
| Парткод: | 50GA 3302 0 |
| Деталь: | RAIL/LEFT |
| Парткод: | 50GA 3314 0 |
| Деталь: | TONER SUPPLY PROTECTION PART |
| Парткод: | 50GA 3305 0E |
| Деталь: | STOPPER |
| Парткод: | 4470 4024 01 |
| Деталь: | TONER SUPPLY UNIT |
| Парткод: | 50GA -320 1 |
| Деталь: | TONER CONVEYANCE GEAR /3 20/25T |
| Парткод: | 50GA 3252 0 |
| Деталь: | TONER SUPPLY DRIVE CAM |
| Парткод: | 50GA 3323 0E |
| Деталь: | STOPPER SPRING |
| Парткод: | 50GA 3270 0 |
| Деталь: | TONER CONVEYANCE GEAR 4 27T |
| Парткод: | 50GA 3253 0 |
| Деталь: | TONER CONVEYANCE SHAFT HOLDER A |
| Парткод: | 25HA 3215 2 |
| Деталь: | FELT C |
| Парткод: | 26NA 3296 0 |
| Деталь: | TONER SUPPLY REGULATING GEAR 21T |
| Парткод: | 50GA 3251 0 |
| Деталь: | TONER CONVEYANCE BEARING /LEFT |
| Парткод: | 26NA 3256 0 |
| Деталь: | SCREW SEAL PART MIDDLE |
| Парткод: | 40LA 3227 0 |
| Деталь: | SPRING REGULATING PART A |
| Парткод: | 50GA 3322 0 |
| Деталь: | AGITATE SCREW ASSY |
| Парткод: | 40LA R706 00 |
| Деталь: | PIN |
| Парткод: | 26NA 3297 0 |
| Деталь: | TONER SUPPLY SCREW |
| Парткод: | 26NA 3204 0 |
| Деталь: | TONER SUPPLY SEAL 3 |
| Парткод: | 26NA 3293 0 |
| Деталь: | TONER SUPPLY SEAL 1 |
| Парткод: | 26NA 3291 0 |
| Деталь: | TONER SUPPLY SEAL 2 |
| Парткод: | 26NA 3292 0 |
| Деталь: | TONER AGITATE SHEET FRONT |
| Парткод: | 26TA 3301 0 |
| Деталь: | LEVEL DETECTION SENSOR |
| Парткод: | 40AA 8803 1 |
| Деталь: | TONER SUPPLY OPEN CLOSE PLATE |
| Парткод: | 50GA 3208 0 |
| Деталь: | SCREW SEAL PART UPPER |
| Парткод: | 26NA 3228 0 |
| Деталь: | TONER AGITATE SHAFT HOLDER |
| Парткод: | 26NA 3254 0 |
| Деталь: | SCREW SEAL PART LOWER |
| Парткод: | 26NA 3220 0 |
| Деталь: | TONER AGITATE SHAFT HOLDER RIGHT |
| Парткод: | 26NA 3255 0 |
| Деталь: | TONER SUPPLY OPEN CLOSE SPRING |
| Парткод: | 26NA 3209 0 |
| Деталь: | SPEWING PREVENTIVE SPACER |
| Парткод: | 26NA 3290 0 |
| Деталь: | TONER SUPPLY OPEN CLOSE SHEET |
| Парткод: | 26NA 3230 0 |
| Деталь: | TONER SUPPLY OPEN CLOSE COVER |
| Парткод: | 26NA 3243 0 |
| Деталь: | TONER AGITATING SHAFT /2 |
| Парткод: | 26NA 3269 0 |
| Деталь: | ENTRANCE GUIDE MAIN BODY |
| Парткод: | 50GA 5036 0 |
| Деталь: | LABEL |
| Парткод: | 4030 7342 01 |
| Деталь: | COLLAR |
| Парткод: | 1134 3041 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3811 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3812 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3813 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3814 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3829 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3806 02 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3825 02 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3824 01 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4011 5852 02 |
| Деталь: | TONER SUPPLY REGULATING GEAR 42T |
| Парткод: | 26NA 3259 0 |
| Деталь: | TONER SUPPLY SEAL 4 |
| Парткод: | 26NA 3294 0 |
| Деталь: | TONER CONVEYANCE GEAR /5 16/23T |
| Парткод: | 26NA 3268 0 |
| Деталь: | LOCK SPRING |
| Парткод: | 50GA 3272 0 |
| Деталь: | LOCK ARM |
| Парткод: | 50GA 3271 0 |
| Деталь: | PAPER FEED SOLENOID |
| Парткод: | 26NA 8251 3 |
| Деталь: | TONER SUPPLY GEAR /1 23/51T |
| Парткод: | 26TA 3261 0 |
| Деталь: | TONER SUPPLY GEAR /2 16/51T |
| Парткод: | 26TA 3264 0 |
| Деталь: | TONER SUPPLY REGULATING GEAR 18T |
| Парткод: | 26TA 3258 0 |
| Деталь: | TONER SUPPLY SHAFT HOLDER |
| Парткод: | 26NA 3266 0 |
| Деталь: | TONER SUPPLY MOTOR |
| Парткод: | 26NA 8006 1 |
| Деталь: | TONER SUPPLY MAIN/UPPER ASSY |
| Парткод: | 50GA -322 1 |
| Деталь: | TONER CONVEYING DRIVE ASSY |
| Парткод: | 50GA -323 0 |
| Деталь: | TONER SUPPLY HOLDING MAIN BODY |
| Парткод: | 26NA 3231 1E |
| Деталь: | TONER SUPPLY HOLDING SEAL /A |
| Парткод: | 26NA 3295 0 |
| Деталь: | TONER SUPPLY SEAL /REAR |
| Парткод: | 26NA 3242 0 |
| Деталь: | Neutralizing Brush |
| Парткод: | 4030 5823 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 5839 03 |
| Деталь: | NETURALIZING MEMBER |
| Парткод: | 4030 5847 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 5806 01 |
| Деталь: | ROLL |
| Парткод: | 4030 5805 03 |
| Деталь: | HOLDER |
| Парткод: | 4030 5843 02 |
| Деталь: | ROLL |
| Парткод: | 4030 5854 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 5857 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 5855 01 |
| Деталь: | ROLLER |
| Парткод: | 4030 5802 01 |
| Деталь: | BUSHING |
| Парткод: | 4030 5842 01 |
| Деталь: | EARTH PLATE |
| Парткод: | 50GA 5492 0 |
| Деталь: | FIXING CASING |
| Парткод: | 50GA 5487 0 |
| Деталь: | BUSHING |
| Парткод: | 4030 5840 02 |
| Деталь: | Gear 21T |
| Парткод: | 4030 5812 01 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4030 5845 02 |
| Деталь: | COLLAR |
| Парткод: | 4030 5844 02 |
| Деталь: | GEAR 19T |
| Парткод: | 4030 5836 01 |
| Деталь: | FIXING COVER REAR |
| Парткод: | 50GA 5482 0 |
| Деталь: | FIXING COVER REAR |
| Парткод: | 42GA 5482 0 |
| Деталь: | GEAR 19T |
| Парткод: | 4030 5817 02 |
| Деталь: | HOLDER |
| Парткод: | 4030 5822 03 |
| Деталь: | GEAR 19T |
| Парткод: | 4030 5816 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 5820 03 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 5821 02 |
| Деталь: | FIXING COVER FRONT |
| Парткод: | 50GA 5481 0 |
| Деталь: | SHAFT SUPPORT PART |
| Парткод: | 50GA 5462 0 |
| Деталь: | CLEANER LOCK SPRING |
| Парткод: | 50GA 5463 0 |
| Деталь: | CLEANER LOCK SHAFT |
| Парткод: | 50GA 5461 1 |
| Деталь: | EXIT ROLL HOLDER 1 ASSY |
| Парткод: | 4040 R706 00 |
| Деталь: | EXIT ROLL HOLDER 2 ASSY |
| Парткод: | 4040 R707 00 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 5858 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 5856 01 |
| Деталь: | POSITIONING PLATE |
| Парткод: | 4030 5848 01 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4030 5827 01 |
| Деталь: | HV CASING |
| Парткод: | 50GA 5053 0 |
| Деталь: | HV POWER SUPPLY SPRING SHAFT |
| Парткод: | 50GA 5047 0E |
| Деталь: | SUPPORTING PLATE TRANSFER |
| Парткод: | 50GA -513 0 |
| Деталь: | POWER SUPPLY PLATE DUCT |
| Парткод: | 50GA 5051 0 |
| Деталь: | COVER MAIN BODY |
| Парткод: | 50GA 5002 0 |
| Деталь: | DUCT SUPPLY PLATE |
| Парткод: | 50GA 5048 0 |
| Деталь: | FAN MOTOR |
| Парткод: | 9313 1100 33 |
| Деталь: | PAPER FEED CONVEYANCE SPRING |
| Парткод: | 50GA 5040 0 |
| Деталь: | BY PASS FEED DRIVEN ROLLER |
| Парткод: | 26NA 4256 0 |
| Деталь: | ADU PAPER EXIT PLATE |
| Парткод: | 50GA 5006 0 |
| Деталь: | Slide Shaft Holder |
| Парткод: | 25AA 7553 0 |
| Деталь: | PAPER FEED IDLER SHAFT |
| Парткод: | 50GA 5008 0 |
| Деталь: | CONVEYANCE SUPPORT PLATE |
| Парткод: | 50GA 5007 0 |
| Деталь: | ADU CONNECTING SHAFT |
| Парткод: | 50GA 5011 0 |
| Деталь: | DUCT COVER PLATE |
| Парткод: | 50GA 5003 0 |
| Деталь: | CONVEYANCE CONNECTING PLATE |
| Парткод: | 50GA 5049 0 |
| Деталь: | DUCT CONNECTING PART |
| Парткод: | 50GA 5010 0 |
| Деталь: | Conveyance Guide Sheet |
| Парткод: | 50GA 5056 0E |
| Деталь: | ADU SUPPORT SHAFT |
| Парткод: | 50GA 5043 0 |
| Деталь: | CONVEYANCE PRESSING PART |
| Парткод: | 50GA 4570 0 |
| Деталь: | CONVEYANCE PRESSING SPRING |
| Парткод: | 50GA 4572 0 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3087 01 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3084 01 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3086 01 |
| Деталь: | FRAME |
| Парткод: | 4030 3041 02 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4030 6811 01 |
| Деталь: | BUSHING |
| Парткод: | 4131 3003 01 |
| Деталь: | ROLLER |
| Парткод: | 4030 3005 01 |
| Деталь: | CLUTCH |
| Парткод: | 4030 3034 01 |
| Деталь: | GEAR 32T |
| Парткод: | 4425 3016 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3002 02 |
| Деталь: | GEAR 29T |
| Парткод: | 4030 3008 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3003 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3036 01 |
| Деталь: | WEIGHT |
| Парткод: | 4030 3088 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4030 3023 03 |
| Деталь: | COVER |
| Парткод: | 4030 3085 01 |
| Деталь: | SHAFT |
| Парткод: | 4040 3097 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3030 01 |
| Деталь: | BUSHING |
| Парткод: | 1065 3086 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3004 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A00J 5894 00 |
| Деталь: | JOINT |
| Парткод: | 1052 4412 01 |
| Деталь: | SHAFT |
| Парткод: | 4040 3096 01 |
| Деталь: | LEVER |
| Парткод: | 4030 3011 03 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3012 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 4037 0906 01 |
| Деталь: | PIN |
| Парткод: | 1067 2501 01 |
| Деталь: | FRAME |
| Парткод: | 4030 3001 03 |
| Деталь: | GEAR 30T |
| Парткод: | 4425 3013 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3016 12 |
| Деталь: | GUIDE |
| Парткод: | 4030 3703 01 |
| Деталь: | ADU MAIN BODY |
| Парткод: | 50GA 5029 0F |
| Деталь: | EARTH GROUND |
| Парткод: | 4030 3735 01 |
| Деталь: | SHAFT ROLLER PART |
| Парткод: | 50GA 5001 0 |
| Деталь: | MEMBER |
| Парткод: | 4497 3114 01 |
| Деталь: | ROLL |
| Парткод: | 4497 3116 01 |
| Деталь: | ADU EARTH PLATE 2 |
| Парткод: | 50GA 5035 0 |
| Деталь: | LEVER |
| Парткод: | 4030 3751 02 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3755 01 |
| Деталь: | ADU COVER PLATE |
| Парткод: | 50GA 5030 0E |
| Деталь: | LABEL |
| Парткод: | 4030 3754 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4661 3106 01 |
| Деталь: | PIN |
| Парткод: | 4661 3150 01 |
| Деталь: | WASHER |
| Парткод: | 4661 3155 01 |
| Деталь: | REINFORCE PLATE /2 |
| Парткод: | 50GA 5057 0 |
| Деталь: | REINFORCE PLATE /1 |
| Парткод: | 50GA 5055 0 |
| Деталь: | DOOR HINGE |
| Парткод: | 50GA -521 0 |
| Деталь: | REAR COVER RIGHT |
| Парткод: | 50GA 1203 0 |
| Деталь: | RIGHT COVER |
| Парткод: | 4030 1015 04 |
| Деталь: | SIDE COVER /LEFT |
| Парткод: | 50GA 1205 0E |
| Деталь: | FRONT COVER LOWER |
| Парткод: | 50GA 1312 0 |
| Деталь: | TONER SUPPLY LABEL |
| Парткод: | 50GA 9704 0 |
| Деталь: | Front Lifting Handle |
| Парткод: | 50GA 1234 0 |
| Деталь: | FULCRUM PLATE ASSY |
| Парткод: | 50GA -122 0 |
| Деталь: | LABEL LOGO MARK |
| Парткод: | 4030 7500 01 |
| Деталь: | FRONT DOOR /RIGHT |
| Парткод: | 42GA 1608 00 |
| Деталь: | MAGNET PRESSURE PLATE |
| Парткод: | 26NA 1240 1 |
| Деталь: | STOPPER MATERIAL |
| Парткод: | 0830 2014 0 |
| Деталь: | FRONT COVER HINGE |
| Парткод: | 50GA 1319 0E |
| Деталь: | PAPER EXIT COVER A |
| Парткод: | 50GA 1311 0 |
| Деталь: | Main body Cover /Front |
| Парткод: | 50GA 1201 2G |
| Деталь: | FRONT AUXILIARY COVER ASSY |
| Парткод: | 50GA -134 0 |
| Деталь: | REAR COVER 1 |
| Парткод: | 50GA 1207 1 |
| Деталь: | HANDLE |
| Парткод: | 4040 1013 01 |
| Деталь: | REAR COVER 2 |
| Парткод: | 50GA 1314 0 |
| Деталь: | REAR COVER |
| Парткод: | 4030 1011 02 |
| Деталь: | LASER CAUTION LABEL/3 |
| Парткод: | 50GA 9718 0 |
| Деталь: | LASER CAUTION LABEL/3 |
| Парткод: | 50GF 9718 0 |
| Деталь: | SHAFT FIXED PART |
| Парткод: | 26NA 2092 0 |
| Деталь: | SEPARATION ROCKING GEAR 18T |
| Парткод: | 26NA 2057 0 |
| Деталь: | IDLER GEAR 25T |
| Парткод: | 26NA 2042 0 |
| Деталь: | ROCKING SHAFT HOLDER |
| Парткод: | 26NA 2038 0 |
| Деталь: | COLLECTING COVER ASSY |
| Парткод: | 50GA -217 0 |
| Деталь: | CLEANER AUXILIARY PART |
| Парткод: | 26NA 2087 0 |
| Деталь: | SPEWING PV SHEET B |
| Парткод: | 26TA 2161 1 |
| Деталь: | COLLECTING SEAL |
| Парткод: | 26NA 2107 0 |
| Деталь: | COLLECT COVER C ASSY |
| Парткод: | 26TA R701 00 |
| Деталь: | RECYCLING SHAFT HOLDER |
| Парткод: | 26TA 2154 0 |
| Деталь: | SCREW SHAFT HOLDER B |
| Парткод: | 26NA 2128 0 |
| Деталь: | TONER CONVEYANCE GEAR 4 13T |
| Парткод: | 26TA 2149 0 |
| Деталь: | TONER CONVEYANCE GEAR 3 16T |
| Парткод: | 26TA 2148 0 |
| Деталь: | TONER CONVEYANCE GEAR 2 18T |
| Парткод: | 26TA 2147 0 |
| Деталь: | TONER CONVEYANCE GEAR 1 19T |
| Парткод: | 26TA 2146 0 |
| Деталь: | SCREW GUIDE PART/REAR ASSY |
| Парткод: | 50GA -205 0 |
| Деталь: | Collection Cover /B CLEANER |
| Парткод: | 26NA 2086 0D |
| Деталь: | FIXING PART SCREW GUIDE |
| Парткод: | 26TA 2088 1 |
| Деталь: | PART /REAR RECYCLING |
| Парткод: | 26TA 2053 1 |
| Деталь: | SHAFT/1 ASSY |
| Парткод: | 26TA -235 0 |
| Деталь: | RECYCLING SHAFT/2 ASSY |
| Парткод: | 26TA -236 0 |
| Деталь: | DRIVE SUPPORT PANEL/1 CAULKING |
| Парткод: | 26TA -237 1 |
| Деталь: | ELECTRODE GUIDE PART /FRONT |
| Парткод: | 40LA 2005 0 |
| Деталь: | Transfer Power supply Plate |
| Парткод: | 26NA 2076 0D |
| Деталь: | PANEL /FRONT CAULKING |
| Парткод: | 40LA -215 1 |
| Деталь: | Collection Spring |
| Парткод: | 26NA 2037 0D |
| Деталь: | BLADE PRESSURE SPRING |
| Парткод: | 40LA 2019 0 |
| Деталь: | TONER COLLECTION SCREW |
| Парткод: | 50GA 2007 0 |
| Деталь: | AGITATOR PLATE A |
| Парткод: | 26TA 2151 0 |
| Деталь: | SEPARATION ROCKING CAM |
| Парткод: | 26NA 2058 0 |
| Деталь: | SCREW GEAR 24T |
| Парткод: | 26NA 2016 0 |
| Деталь: | SCREW SHAFT HOLDER |
| Парткод: | 26NA 2014 0 |
| Деталь: | FELT A |
| Парткод: | 26NA 2071 0 |
| Деталь: | AGITATING GEAR 19/30T |
| Парткод: | 26NA 2017 0 |
| Деталь: | BLADE SEAL BLOCK F ASSY |
| Парткод: | 40LA R701 00 |
| Деталь: | BLADE SEAL BLOCK 1 ASSY |
| Парткод: | 40LA R703 00 |
| Деталь: | TONER AGITATE SHAFT |
| Парткод: | 26NA 2055 3 |
| Деталь: | DRUM CLEANING BLADE ASSY |
| Парткод: | 50GA -209 0 |
| Деталь: | CLEANER COLLECT SEAL |
| Парткод: | 26NA 2022 0 |
| Деталь: | SHAFT HOLDER SPACER |
| Парткод: | 26NA 2116 0 |
| Деталь: | TONER COLLECT COUPLING |
| Парткод: | 26NA 2056 0 |
| Деталь: | Cartridge Reinforce Part |
| Парткод: | 40LA 2036 0E |
| Деталь: | Cartridge Rail |
| Парткод: | 40LA 2034 0D |
| Деталь: | FAN COVER RIGHT |
| Парткод: | 50GA 4404 1 |
| Деталь: | PAPER EXIT SUCTION FILTER |
| Парткод: | 50GA 4406 0 |
| Деталь: | FILTER COVER RIGHT |
| Парткод: | 50GA 4405 0 |
| Деталь: | Neutralizing Brush |
| Парткод: | 4040 3833 02 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4011 5852 02 |
| Деталь: | FAN MOTOR |
| Парткод: | 9313 1100 33 |
| Деталь: | COVER |
| Парткод: | 4030 3820 01 |
| Деталь: | GUIDE PART RIGHT |
| Парткод: | 50GA 4403 0 |
| Деталь: | DUCT COVER CASING |
| Парткод: | 50GA 4411 0 |
| Деталь: | TENSION SPRING |
| Парткод: | 4030 3810 01 |
| Деталь: | GEAR |
| Парткод: | 4030 3821 01 |
| Деталь: | COLLAR |
| Парткод: | 1200 2105 02 |
| Деталь: | MOTOR |
| Парткод: | 9314 1200 91 |
| Деталь: | GUIDE |
| Парткод: | 4030 3805 02 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | 4030 6824 01 |
| Деталь: | EARTH GROUND |
| Парткод: | 4030 3834 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 4037 0906 01 |
| Деталь: | SOLENOID |
| Парткод: | 9321 2200 32 |
| Деталь: | PAPER EXIT SEAL /1 |
| Парткод: | 50GA 4407 0 |
| Деталь: | MOUNTING STAY /RIGHT |
| Парткод: | 50GA 4402 0 |
| Деталь: | Paper exit Panel /Front |
| Парткод: | 50GA 4410 0E |
| Деталь: | Write Unit |
| Парткод: | 50GA -650 1 |
| Деталь: | WRITING CLEANER KNOB |
| Парткод: | 40LA 6526 0 |
| Деталь: | DRUM COOLING DUCT/1 |
| Парткод: | 50GA 7339 0 |
| Деталь: | DUST PROOF FILTER |
| Парткод: | 50GA 7391 0 |
| Деталь: | MAIN BODY FAN MOTOR |
| Парткод: | 27LA 8051 1 |
| Деталь: | DRUM COOLING DUCT /2 |
| Парткод: | 50GA 7379 0E |
| Деталь: | DUST PROOFSEAL 5 |
| Парткод: | 26NA 7373 2 |
| Деталь: | INDEX ASSY |
| Парткод: | 26NA -909 2E |
| Деталь: | Dustproof Seal |
| Парткод: | 27LA 7391 0 |
| Деталь: | COLLAR |
| Парткод: | 4658 3047 01 |
| Деталь: | DEVELOPING UNIT |
| Парткод: | 50GA -300 1 |
| Деталь: | DEVELOPING COVER ASSY |
| Парткод: | 26TA R702 00 |
| Деталь: | DEVELOPING SHAFT HOLDER |
| Парткод: | 26NA 3077 0 |
| Деталь: | SHAFT HOLDER SPACER |
| Парткод: | 26NA 3085 0 |
| Деталь: | PIN A D2X10 |
| Парткод: | 4660 7801 0 |
| Деталь: | AGITATING GEAR B 20T |
| Парткод: | 50GA 3015 0 |
| Деталь: | DEVELOPING SEAL S |
| Парткод: | 26NA 3094 0 |
| Деталь: | AGITATING GEAR A 22T |
| Парткод: | 50GA 3014 0 |
| Деталь: | HIGE VOLTAGE CAUTION LABEL |
| Парткод: | 56UA 9792 0 |
| Деталь: | POSITIONING SCREW |
| Парткод: | 26NA 3101 0 |
| Деталь: | DEVELOPING COVER ASSY |
| Парткод: | 50GA -304 0 |
| Деталь: | DEVELOPING ADJUSTING CAM FRONT |
| Парткод: | 26NA 3075 0 |
| Деталь: | DEVELOPING SUPPORT STOPPER |
| Парткод: | 26NA 3093 0 |
| Деталь: | IDLING GEAR 2 15T |
| Парткод: | 50GA 3018 0 |
| Деталь: | IDLING GEAR 1 15T |
| Парткод: | 50GA 3017 0 |
| Деталь: | SHAFT HOLDER FULCRUM PART |
| Парткод: | 26NA 3086 0 |
| Деталь: | DRUM SUPPORT SHAFT HOLDER |
| Парткод: | 26NA 2136 0 |
| Деталь: | DEVELOPING SHAFT HOLDER FRONT |
| Парткод: | 26NA 3063 0 |
| Деталь: | DEVELOPING CONNECTING PLATE |
| Парткод: | 26NA 3036 0 |
| Деталь: | DEVELOPING SHAFT HOLDER REAR |
| Парткод: | 26NA 3065 0 |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 3066 0 |
| Деталь: | DEVELOPING GEAR |
| Парткод: | 26NA 3070 0 |
| Деталь: | SPACER C |
| Парткод: | 26NA 3096 0 |
| Деталь: | DEVELOPING COVER PART C ASSY |
| Парткод: | 26NA R707 00 |
| Деталь: | AGITATE COUPLING |
| Парткод: | 26NA 3073 0 |
| Деталь: | AGITATE COUPLING A |
| Парткод: | 26NA 3095 0 |
| Деталь: | Magnet Adjusting Plate |
| Парткод: | 26NA 3021 1G |
| Деталь: | DEVELOPING SUCTION SEAL C |
| Парткод: | 50GA 3161 0 |
| Деталь: | DEVELOPING SUCTION SEAL B |
| Парткод: | 50GA 3160 0 |
| Деталь: | DEVELOPING COVER PART /B |
| Парткод: | 26NA 3009 0 |
| Деталь: | DEVELOPING STAY CAULKING |
| Парткод: | 50GA -307 0E |
| Деталь: | SUCTION FILTER A ASSY |
| Парткод: | 40LA R705 00 |
| Деталь: | FAN COVER ASSY Main |
| Парткод: | 50GA -315 0 |
| Деталь: | Body Fan Motor SUCTION |
| Парткод: | 27LA 8051 1 |
| Деталь: | COVER 6 ASSY SUCTION |
| Парткод: | 50GA -313 0 |
| Деталь: | COVER /1 ASSY |
| Парткод: | 50GA -316 0 |
| Деталь: | SUCTION COVER 2 ASSY |
| Парткод: | 50GA -311 0 |
| Деталь: | SUCTION COVER 8 ASSY |
| Парткод: | 50GA -319 0 |
| Деталь: | FILTERCOVER ASSY |
| Парткод: | 50GA -314 0 |
| Деталь: | DUST PROOFSEAL 5 |
| Парткод: | 26NA 7373 2 |
| Деталь: | Dustproof Seal |
| Парткод: | 27LA 7391 0 |
| Деталь: | DUMPER PLATE ASSY |
| Парткод: | 50GA -155 0 |
| Деталь: | DRIVE PLATE COMBINED |
| Парткод: | 26NA R702 00 |
| Деталь: | DRUM DRIVING GEAR 108T |
| Парткод: | 26NA 1560 0 |
| Деталь: | GEAR B 105T |
| Парткод: | 50GA 1551 0 |
| Деталь: | COUPLING SPRING |
| Парткод: | 26NA 1520 0 |
| Деталь: | SPRING SPACER |
| Парткод: | 26NA 3087 0 |
| Деталь: | PAPER FEED SHAFT HOLDER |
| Парткод: | 4660 7602 0 |
| Деталь: | PRESSING PART |
| Парткод: | 50GA 1548 0 |
| Деталь: | GEAR J 21T |
| Парткод: | 50GA 1562 0 |
| Деталь: | GEAR K 23T |
| Парткод: | 50GA 1563 0 |
| Деталь: | COLLECTION GEAR 20T |
| Парткод: | 50GA 1555 0 |
| Деталь: | GEAR L 28T |
| Парткод: | 50GA 1564 0 |
| Деталь: | AGITATING GEAR /UPPER 17/30T |
| Парткод: | 50GA 1556 0 |
| Деталь: | GEAR G 22T |
| Парткод: | 50GA 1559 0 |
| Деталь: | GEAR /H 19/26T |
| Парткод: | 50GA 1560 0 |
| Деталь: | AGITATING GEAR 21T |
| Парткод: | 50GA 1557 0 |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 1728 0 |
| Деталь: | AGITATING COUPLING B |
| Парткод: | 26NA 1758 0 |
| Деталь: | SHAFT ASSY |
| Парткод: | 50GA -154 0 |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 5359 0 |
| Деталь: | DRUM INPUT SHAFT ASSY |
| Парткод: | 50GA -153 0 |
| Деталь: | CONVEYANCE EARTH PLATE |
| Парткод: | 50GA 4569 1E |
| Деталь: | ADU Input Gear 28/49T |
| Парткод: | 50GA 1619 1 |
| Деталь: | Paper feed Gear/C 38T |
| Парткод: | 50GA 1613 0 |
| Деталь: | Paper feed Gear/B 27T |
| Парткод: | 50GA 1612 0 |
| Деталь: | PAPER FEED GEAR A 32T |
| Парткод: | 50GA 1611 0 |
| Деталь: | Paper feed Drive Gear 29/62T |
| Парткод: | 50GA 1610 0 |
| Деталь: | PAPER FEED GEAR /I 20T |
| Парткод: | 50GA 1620 0E |
| Деталь: | PAPER FEED GEAR /D 19T |
| Парткод: | 50GA 1614 0E |
| Деталь: | PAPER FEED GEAR /H 28T |
| Парткод: | 50GA 1618 0F |
| Деталь: | POLYSLIDER 8 |
| Парткод: | 1900 4142 0 |
| Деталь: | Paper feed Gear /F 21/23T |
| Парткод: | 50GA 1616 0 |
| Деталь: | Paper feed Gear /G 19/26T |
| Парткод: | 50GA 1617 0 |
| Деталь: | PLYSLIDER 6 |
| Парткод: | 1900 4141 0 |
| Деталь: | DC BRUSHLESS MOTOR/30 |
| Парткод: | 27LA 8003 2E |
| Деталь: | DRUM DRIVE ASSY |
| Парткод: | 50GA -159 0 |
| Деталь: | SPACER |
| Парткод: | 50GA 2501 00 |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -164 1F |
| Деталь: | Agitating Shaft |
| Парткод: | 50GA 1518 1E |
| Деталь: | DRIVE PANEL /C |
| Парткод: | 50GA 1503 0 |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -167 0F |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -165 0E |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -168 0E |
| Деталь: | PAPER FEED PROTECTION PANEL |
| Парткод: | 50GA 1605 0 |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -160 1E |
| Деталь: | ORIGINAL TABLE GLASS ASSY |
| Парткод: | 50GA -627 0 |
| Деталь: | APS SENSOR 2 |
| Парткод: | 56AA 8553 1 |
| Деталь: | MOUNTING PLATE |
| Парткод: | 40LA 6114 0 |
| Деталь: | LENS COVER |
| Парткод: | 26NA 6173 2 |
| Деталь: | WIRING GUIDE PLATE 1 |
| Парткод: | 26NA 6181 2 |
| Деталь: | WIRING HOLD PART 1 |
| Парткод: | 26NA 6228 0 |
| Деталь: | GLASS HOLDER PLATE FRONT |
| Парткод: | 26NA 6130 0 |
| Деталь: | REED SWITCH |
| Парткод: | 9334 2610 12 |
| Деталь: | ORIGINAL TABLE GLASS ASSY 2 |
| Парткод: | 50GA -628 0 |
| Деталь: | OPTION RELAY WIRING |
| Парткод: | 50GA 9042 0 |
| Деталь: | GLASS HOLDER PLATE REAR |
| Парткод: | 26NA 6115 0 |
| Деталь: | PHOTO SENSOR |
| Парткод: | 56AA 8551 1 |
| Деталь: | WIRING GUIDE PART 3 |
| Парткод: | 40LA 6201 0 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | LAMP STARTER |
| Парткод: | 40LA 8351 3 |
| Деталь: | SCANNER DRIVE BOAD ASSY |
| Парткод: | 50GA -905 0 |
| Деталь: | SCANNER DRIVE MOTOR |
| Парткод: | 50GA 8002 0 |
| Деталь: | GLASS HOLDING PLATE |
| Парткод: | 26NA 6216 0 |
| Деталь: | MOTOR TENSION SPRING 1 |
| Парткод: | 40LA 6246 0 |
| Деталь: | WIRING GUIDE PLATE 2 |
| Парткод: | 50GA 6211 0 |
| Деталь: | WIRING GUIDE PLATE 3 |
| Парткод: | 50GA 6212 0 |
| Деталь: | CCD UNIT |
| Парткод: | 50GA -626 1 |
| Деталь: | HIGE VOLTAGE CAUTION LABEL |
| Парткод: | 56UA 9792 0 |
| Деталь: | ADF MOUNTING PLATE /LEFT |
| Парткод: | 50GA 6111 0 |
| Деталь: | Mounting Plate /2 |
| Парткод: | 50GA 6214 0 |
| Деталь: | Board Mounting Plate /No.1 |
| Парткод: | 50GA 6251 0E |
| Деталь: | Motor Mounting Plate |
| Парткод: | 40LA 6116 1E |
| Деталь: | ADF MOUNTING PLATE /RIGHT |
| Парткод: | 50GA 6112 0 |
| Деталь: | READ AUXILIARY PLATE /B |
| Парткод: | 50GA 6254 0 |
| Деталь: | READ AUXILIARY PLATE /C |
| Парткод: | 50GA 6257 0 |
| Деталь: | READ AUXILIARY PLATE /A |
| Парткод: | 50GA 6253 0 |
| Деталь: | ADF CONNECTOR /1 |
| Парткод: | 50GA 6252 0 |
| Деталь: | BRACKET |
| Парткод: | 4030 5750 03 |
| Деталь: | SEPARATION SUPPORT PART |
| Парткод: | 42GA 5498 0 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4030 5827 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 5808 02 |
| Деталь: | STOPPER |
| Парткод: | 4470 4024 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 5809 02 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 5810 02 |
| Деталь: | ROLLER PRESSING SPRING |
| Парткод: | 50GA 5495 0 |
| Деталь: | ROLL |
| Парткод: | 4030 5805 03 |
| Деталь: | TENSION SPRING |
| Парткод: | 4030 5717 01 |
| Деталь: | Fixing Claw |
| Парткод: | 50GA 7227 00 |
| Деталь: | SHAFT |
| Парткод: | 4030 5753 01 |
| Деталь: | Conveyance Guide Part /Left |
| Парткод: | 50GA 5486 0E |
| Деталь: | Conveyance Guide Part /Left |
| Парткод: | 42GA 5486 0E |
| Деталь: | FIXING CLAW ASSY |
| Парткод: | 50GA -533 0 |
| Деталь: | FIXING CLAW ASSY |
| Парткод: | 42GA -533 0 |
| Деталь: | SHAFT |
| Парткод: | 4030 5856 01 |
| Деталь: | CHARGE CORONA UNIT |
| Парткод: | 50GA -250 0 |
| Деталь: | CHARGE CLEANIG KNOB |
| Парткод: | 40LA 2519 0 |
| Деталь: | CHARGE DISCHARGING PLATE ASSY |
| Парткод: | 50GA -251 0 |
| Деталь: | CHARGING BLOCK FRONT |
| Парткод: | 40LA 2502 0 |
| Деталь: | SHAFT STOPPER PART |
| Парткод: | 25HA 2510 0 |
| Деталь: | SPARK ARRESTER PREVENTIVE PLATE FRO NT |
| Парткод: | 40LA 2504 0 |
| Деталь: | CHARGING ELECTRODE PLATE |
| Парткод: | 40LA 2507 0 |
| Деталь: | CHARGING SPRING |
| Парткод: | 26NA 2518 0 |
| Деталь: | WIRE TENSION SPRING |
| Парткод: | 26NA 2517 0 |
| Деталь: | CHARGING CONTROL PLATE |
| Парткод: | 40LA 2516 0 |
| Деталь: | CHARGING WIRE |
| Парткод: | 50GA 2506 0 |
| Деталь: | CHARGING BLOCK REAR |
| Парткод: | 40LA 2501 1 |
| Деталь: | SPARK ARRESTER PREVENTIVE PLATE REA R |
| Парткод: | 40LA 2505 0 |
| Деталь: | CHARGING CLEANING ASSY |
| Парткод: | 40LA R704 00 |
| Деталь: | CHARGING CLEANING SHAFT |
| Парткод: | 50GA 2509 0 |
| Деталь: | CHARGING CLEANING HANDLE |
| Парткод: | 40LA 2520 0 |
| Деталь: | DC BRUSHLESS MOTOR/30 |
| Парткод: | 27LA 8003 2E |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 1728 0 |
| Деталь: | DEVELOPING DRIVE GEAR 2 27T |
| Парткод: | 50GA 1752 0 |
| Деталь: | DEVELOPING DRIVE GEAR 6 32T |
| Парткод: | 40LA 1754 0 |
| Деталь: | DEVELOPING DRIVE GEAR 7 39T |
| Парткод: | 40LA 1755 0 |
| Деталь: | PLYSLIDER 6 |
| Парткод: | 1900 4141 0 |
| Деталь: | DEVELOPING DRIVE GEAR /1 26/52T |
| Парткод: | 50GA 1751 0 |
| Деталь: | DEVELOPING INPUT COUPLING A |
| Парткод: | 40LA 1756 0 |
| Деталь: | DEVELOPING INPUT COUPLING B |
| Парткод: | 26NA 1757 0 |
| Деталь: | SPACER B |
| Парткод: | 26NA 1759 0 |
| Деталь: | DUST PROOF COVER |
| Парткод: | 50GA 1703 0 |
| Деталь: | DEVELOPING DRIVE GEAR /3 25/28T |
| Парткод: | 50GA 1753 0 |
| Деталь: | SHAFT SPACER |
| Парткод: | 13QA 1033 0 |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -172 0 |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -171 0 |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -173 0E |
| Деталь: | Developing Drive Shaft |
| Парткод: | 50GA 1760 1E |
| Деталь: | WRITING MOUNT PART |
| Парткод: | 26NA 6528 0 |
| Деталь: | WRITING MOUNT SPRING |
| Парткод: | 26NA 6529 0 |
| Деталь: | ROLLER COOLING DUCT 3 |
| Парткод: | 50GA 5465 0 |
| Деталь: | COOLING FAN MOTOR |
| Парткод: | 50GA 8051 0 |
| Деталь: | SEALING PART |
| Парткод: | 50GA 5468 0 |
| Деталь: | ROLLER COOLING DUCT 4 |
| Парткод: | 50GA 5466 0 |
| Деталь: | Reinforce Stay /B |
| Парткод: | 50GA 1007 0E |
| Деталь: | Guide Part /F |
| Парткод: | 50GA 1023 0D |
| Деталь: | SUPPLY STAY /A |
| Парткод: | 50GA 1006 0 |
| Деталь: | FAN MOUNTING PLATE |
| Парткод: | 50GA 5467 0 |
| Деталь: | WIRE SUPPORT PART 4 |
| Парткод: | 50GA 5022 0 |
| Деталь: | WIRE SUPPORT PART 1 |
| Парткод: | 50GA 5019 0 |
| Деталь: | BRACKET |
| Парткод: | 4030 2018 01 |
| Деталь: | ADU LOCK PART/REAR |
| Парткод: | 50GA 1019 0 |
| Деталь: | ADU LOCK PART/ FRONT |
| Парткод: | 50GA 1018 0 |
| Деталь: | HOLDER |
| Парткод: | 4030 2037 01 |
| Деталь: | RUBBER FOOT |
| Парткод: | 4030 2080 01 |
| Деталь: | SWITCH |
| Парткод: | 9332 5710 11 |
| Деталь: | BOARD MOUNTING STAY /RIGHT |
| Парткод: | 50GA 1015 0 |
| Деталь: | REINFORCE STAY /2 |
| Парткод: | 50GA 1010 0 |
| Деталь: | READ MOUNTING STAY |
| Парткод: | 50GA 1021 0 |
| Деталь: | REINFORCE STAY /3 |
| Парткод: | 50GA 1011 0 |
| Деталь: | Mounting Plate /1 |
| Парткод: | 50GA 1024 0 |
| Деталь: | Reinforce Stay /4 |
| Парткод: | 50GA 1012 1 |
| Деталь: | REINFORCE STAY /5 |
| Парткод: | 50GA 1022 0 |
| Деталь: | READ MOUNTING PEDESTAL /LEFT |
| Парткод: | 50GA 1013 0 |
| Деталь: | EXTERNAL SUPPORT PLATE /1 |
| Парткод: | 50GA 1030 0 |
| Деталь: | Board Mounting Stay /Rear |
| Парткод: | 50GA 1016 0 |
| Деталь: | READ MOUNTING PEDESTAL /RIGHT |
| Парткод: | 50GA 1014 0 |
| Деталь: | BRACKET |
| Парткод: | 4030 2062 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 2009 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 2039 02 |
| Деталь: | ADU HOLDING SPRING |
| Парткод: | 50GA 5039 0 |
| Деталь: | WIRE SUPPORT PART 4 |
| Парткод: | 50GA 5022 0 |
| Деталь: | WIRE SUPPORT PART 1 |
| Парткод: | 50GA 5019 0 |
| Деталь: | WIRE SUPPORT PART 2 |
| Парткод: | 50GA 5020 0 |
| Деталь: | WIRE SUPPORT PART 5 |
| Парткод: | 50GA 5024 0 |
| Деталь: | WIRE SUPPORT PART 3 |
| Парткод: | 50GA 5021 0 |
| Деталь: | ADU STOPPER WIRE |
| Парткод: | 50GA 5023 0 |
| Деталь: | ADU SOLENOID SHAFT ASSY |
| Парткод: | 26NA R709 00 |
| Деталь: | SOLENOID ACTUATOR |
| Парткод: | 50GA 5366 0 |
| Деталь: | SOLENOID STOPPER |
| Парткод: | 27LA 5446 0 |
| Деталь: | SOLENOID MOUNTING PLATE CAULKI |
| Парткод: | 50GA -550 0 |
| Деталь: | TRANSFER SEPARATING CORONA UNIT |
| Парткод: | 50GA -260 0 |
| Деталь: | SPARK PREVENTING PLATE /FRONT |
| Парткод: | 50GA 2606 0E |
| Деталь: | ELECTRODE SPRING |
| Парткод: | 26NA 2626 0 |
| Деталь: | ELECTRODE PLATE |
| Парткод: | 26NA 2625 0 |
| Деталь: | TRANSFER SEPARATOR BLOCK FRONT ASSY |
| Парткод: | 50GA -262 0 |
| Деталь: | ELECTRODE CONNECTING SPRING A |
| Парткод: | 26NA 7325 1 |
| Деталь: | SEPARATION BRIDGE |
| Парткод: | 50GA 2619 1E |
| Деталь: | DISCHARGE WIRE |
| Парткод: | 26NA 2608 0 |
| Деталь: | TRANSFER HOLDING RUBBER |
| Парткод: | 56AA 1783 0 |
| Деталь: | WIRE TENSION SPRING |
| Парткод: | 26NA 2623 0 |
| Деталь: | SPARK PREVENTING PLATE /REAR |
| Парткод: | 50GA 2607 0F |
| Деталь: | TRANSFER SEPARATOR BLOCK REAR |
| Парткод: | 50GA 2604 0 |
| Деталь: | TRANSFER GUIDE PLATE ASSY |
| Парткод: | 50GA -261 0 |
| Деталь: | TONER SUPPLY PULLING LEVER |
| Парткод: | 50GA 3308 0E |
| Деталь: | Toner supply Guide Plate /Lower |
| Парткод: | 50GA 3210 2I |
| Деталь: | TONER SUPPLY AUXILIARY COVER B |
| Парткод: | 50GA 3318 2 |
| Деталь: | Toner supply Index Part |
| Парткод: | 50GA 3315 2F |
| Деталь: | Toner supply Index Part |
| Парткод: | 50GE 3315 2F |
| Деталь: | Toner supply Index Part |
| Парткод: | 50GF 3315 2F |
| Деталь: | TONER SUPPLY AUXILIARY COVER |
| Парткод: | 50GA 3306 0E |
| Деталь: | LEVER MOUNTING PLATE |
| Парткод: | 50GA 3309 1E |
| Деталь: | TONER SUPPLY GUIDE RAIL /MIDDL |
| Парткод: | 50GA 3304 0 |
| Деталь: | Mounting Plate /A |
| Парткод: | 50GA 3319 0 |
| Деталь: | MOUNTING PART /A ASSY |
| Парткод: | 50GA -337 0 |
| Деталь: | REGULATING SEAL A |
| Парткод: | 50GA 3321 0 |
| Деталь: | SCATTER PREVENTING SEAL B |
| Парткод: | 50GA 3332 0 |
| Деталь: | Auxiliary Label /1 |
| Парткод: | A0R5 9436 00 |
| Деталь: | GUIDE |
| Парткод: | 4030 3706 12 |
| Деталь: | GUIDE |
| Парткод: | 4030 3760 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3739 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3738 03 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3737 01 |
| Деталь: | BUSHING |
| Парткод: | 0928 3033 01 |
| Деталь: | ROLLER |
| Парткод: | 4030 3707 01 |
| Деталь: | ADU CLUTCH |
| Парткод: | 50GA 8203 0 |
| Деталь: | ROLLER |
| Парткод: | 4030 3708 01 |
| Деталь: | GEAR |
| Парткод: | 4030 3743 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 3742 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3741 03 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3740 01 |
| Деталь: | ROLLER |
| Парткод: | 4030 3709 01 |
| Деталь: | PULLEY |
| Парткод: | 4030 3750 01 |
| Деталь: | COLLAR |
| Парткод: | 4030 3749 01 |
| Деталь: | SHAFT ROLLER PART |
| Парткод: | 50GA 5001 0 |
| Деталь: | MEMBER |
| Парткод: | 4497 3114 01 |
| Деталь: | ROLL |
| Парткод: | 4497 3116 01 |
| Деталь: | ADU PAPER EXIT PLATE |
| Парткод: | 50GA 5038 0 |
| Деталь: | Fixing Plate |
| Парткод: | 50GA 5041 0 |
| Деталь: | ADU DRIVE MAIN BODY |
| Парткод: | 50GA 5031 0 |
| Деталь: | COLLAR |
| Парткод: | 4030 3749 01 |
| Деталь: | PULLEY |
| Парткод: | 4030 3748 01 |
| Деталь: | ADU DRIVE BELT UPPER 213L |
| Парткод: | 50GA 5016 0 |
| Деталь: | DRIVE COVER MAIN BODY |
| Парткод: | 50GA 5037 0 |
| Деталь: | GEAR |
| Парткод: | 4030 3726 01 |
| Деталь: | GEAR |
| Парткод: | 4030 3713 01 |
| Деталь: | GEAR |
| Парткод: | 4030 3725 01 |
| Деталь: | PULLEY |
| Парткод: | 4030 3744 01 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4030 3710 01 |
| Деталь: | EARTH GROUND |
| Парткод: | 4030 3734 01 |
| Деталь: | ADU DRIVE BELT LOWER 312L |
| Парткод: | 50GA 5017 0 |
| Деталь: | ROLL |
| Парткод: | 4657 3714 01 |
| Деталь: | PULLEY |
| Парткод: | 4030 3745 01 |
| Деталь: | INPUT GEAR /1 |
| Парткод: | 50GA 5058 00 |
| Деталь: | DRIVE PLATE 2CAULKING |
| Парткод: | 50GA -520 0 |
| Деталь: | ROTATION SPACER |
| Парткод: | 50GA 5061 00 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3733 03 |
| Деталь: | ADU DRIVE PLATE /2 |
| Парткод: | 50GA 5033 0 |
| Деталь: | DRIVE PLATE/1 CAULKING |
| Парткод: | 50GA -519 0 |
| Деталь: | ADU SUPPORT PLATE |
| Парткод: | 50GA 5012 0 |
| Деталь: | PTL |
| Парткод: | 50GA -913 0 |
| Деталь: | PTL LIGHT BLOCKING SHEET |
| Парткод: | 50GA 4571 0 |
| Деталь: | STICKING PART |
| Парткод: | 26NA 4552 0 |
| Деталь: | CONVEYANCE COVER SHEET |
| Парткод: | 50GA 4553 0 |
| Деталь: | LIFTING SPRING 2 |
| Парткод: | 26NA 4549 0 |
| Деталь: | LIFT UP SPRING |
| Парткод: | 26NA 4507 1 |
| Деталь: | CONVEYANCE HANDLE |
| Парткод: | 50GA 4535 1 |
| Деталь: | LOCK SPRING 1 |
| Парткод: | 50GA 4532 0 |
| Деталь: | LOCK SPRING 2 |
| Парткод: | 50GA 4533 0 |
| Деталь: | OPEN CLOSE LEVER 1 |
| Парткод: | 50GA 4522 1 |
| Деталь: | OPEN CLOSE LEVER 2 |
| Парткод: | 50GA 4531 1 |
| Деталь: | CONVEYANCE COVER PART 2 |
| Парткод: | 50GA 4559 0 |
| Деталь: | CONVEYANCE COVER PART 5 |
| Парткод: | 50GA 4575 0 |
| Деталь: | CONVEYANCE COVER PART 4 |
| Парткод: | 50GA 4574 0 |
| Деталь: | CONVEYANCE COVER PART 3 |
| Парткод: | 50GA 4573 0 |
| Деталь: | EARTH SHAFT 1 |
| Парткод: | 50GA 4565 0 |
| Деталь: | CONVEYANCE SUPPORT PLATE 1 |
| Парткод: | 50GA 4527 0 |
| Деталь: | CONVEYANCE COVER PART 1 |
| Парткод: | 50GA 4558 0 |
| Деталь: | CORD COVER |
| Парткод: | 50GA 4539 0 |
| Деталь: | CONVEYANCE COVER ASSY |
| Парткод: | 50GA -452 0 |
| Деталь: | HIGE VOLTAGE CAUTION LABEL |
| Парткод: | 56UA 9792 0 |
| Деталь: | CONVEYANCE UNIT |
| Парткод: | 50GA -450 0 |
| Деталь: | Stopper Plate |
| Парткод: | 26NA 4538 1 |
| Деталь: | EARTH PLATE |
| Парткод: | 50GA 4509 0 |
| Деталь: | Conveyance Open/close Shaft |
| Парткод: | 50GA 4521 0D |
| Деталь: | CONVEYANCE SUPPORT PLATE /2 |
| Парткод: | 50GA 4528 0 |
| Деталь: | LIFTING PLATE |
| Парткод: | 50GA 4508 0 |
| Деталь: | MAIN CONTROL BOARD UNIT |
| Парткод: | 50GA -902 0E |
| Деталь: | SYSTEM CONTROL BOARD UNIT |
| Парткод: | 50GA -930 4O |
| Деталь: | CORD CAUTION LABEL |
| Парткод: | 40LA 9736 1 |
| Деталь: | BOARD MOUNTING STAY/1 |
| Парткод: | 50GA 7333 0 |
| Деталь: | BOARD MOUNTING STAY/2 |
| Парткод: | 50GA 7334 0 |
| Деталь: | Board Cover /D |
| Парткод: | 50GA 7345 1E |
| Деталь: | Board Mounting Plate |
| Парткод: | 50GA 7354 0 |
| Деталь: | BOARD COVER PLATE/A |
| Парткод: | 50GA 7356 0 |
| Деталь: | Board Cover /B |
| Парткод: | 50GA 7357 0E |
| Деталь: | BOARD COVER PLATE/E |
| Парткод: | 50GA 7374 0 |
| Деталь: | BOARD COVER PLATE/C |
| Парткод: | 50GA 7377 0 |
| Деталь: | BRAKE |
| Парткод: | 4030 3486 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4030 3411 03 |
| Деталь: | COVER |
| Парткод: | 4030 3466 02 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3415 02 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 4037 0906 01 |
| Деталь: | SHAFT |
| Парткод: | 1134 3042 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 3414 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3446 01 |
| Деталь: | TRAY |
| Парткод: | 4030 3423 03 |
| Деталь: | COVER |
| Парткод: | 4030 3459 02 |
| Деталь: | LABEL TRAY CAUTION |
| Парткод: | 4030 7309 02 |
| Деталь: | LABEL |
| Парткод: | 4030 7305 01 |
| Деталь: | TRAY |
| Парткод: | 4030 3408 03 |
| Деталь: | BRACKET |
| Парткод: | 4030 3437 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3435 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3473 02 |
| Деталь: | STOPPER |
| Парткод: | 4030 3463 01 |
| Деталь: | BRACKET ASSY |
| Парткод: | 4030 0216 05 |
| Деталь: | GEAR 13/18T |
| Парткод: | 4030 3412 01 |
| Деталь: | RACK |
| Парткод: | 4030 3460 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 3455 02 |
| Деталь: | RESISTOR |
| Парткод: | 4037 6899 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3472 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4030 3410 03 |
| Деталь: | BRAKE |
| Парткод: | 4030 3487 01 |
| Деталь: | SCALE METRIC |
| Парткод: | 4030 7307 02 |
| Деталь: | SCALE METRIC |
| Парткод: | 4030 7306 02 |
| Деталь: | SCALE INCH |
| Парткод: | 4030 7308 02 |
| Деталь: | CLEANING PAD |
| Парткод: | 4131 4623 04 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3436 01 |
| Деталь: | FERRITE CORE |
| Парткод: | 9326 1910 31 |
| Деталь: | COVER |
| Парткод: | 4030 3426 01 |
| Деталь: | COVER |
| Парткод: | 4030 3480 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3108 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3032 03 |
| Деталь: | ROLLER GUIDE SHEET |
| Парткод: | 50GA 4001 0 |
| Деталь: | LEVER |
| Парткод: | 4030 3078 01 |
| Деталь: | TENSION SPRING |
| Парткод: | 4030 3125 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3044 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3017 03 |
| Деталь: | BRACKET |
| Парткод: | 4030 3014 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3080 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3079 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3026 02 |
| Деталь: | GUIDE |
| Парткод: | 4030 3027 02 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3037 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3025 02 |
| Деталь: | SEPARATION ROLLER ASSY |
| Парткод: | 4030 0151 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3077 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3013 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3039 01 |
| Деталь: | SPACER |
| Парткод: | 4040 5610 00 |
| Деталь: | SPACER |
| Парткод: | 4040 5612 00 |
| Деталь: | ROLLER MOUNTING PLATE UPPER |
| Парткод: | 50GA 4003 0 |
| Деталь: | PAPER FEED ROLLER SHAFT |
| Парткод: | 50GA 4002 0 |
| Деталь: | SEPARATE ROCKING COLLAR |
| Парткод: | 26NA 2030 0 |
| Деталь: | ROLLER |
| Парткод: | 4658 3513 01 |
| Деталь: | FIXING GEAR A 80T |
| Парткод: | 50GA 1851 0 |
| Деталь: | DRIVING SPACER 1 |
| Парткод: | 40LA 1740 0 |
| Деталь: | Fixing Gear/D 19T Fixing |
| Парткод: | 50GA 1854 2G |
| Деталь: | Gear/C 19T FIXING |
| Парткод: | 50GA 1853 2G |
| Деталь: | Swing Spring |
| Парткод: | 50GA 1841 0 |
| Деталь: | Fixing Gear/E 18T |
| Парткод: | 50GA 1855 2G |
| Деталь: | Fixing Gear /F 19T |
| Парткод: | 50GA 1859 2G |
| Деталь: | Fixing Gear/B 18T |
| Парткод: | 50GA 1852 3I |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 1728 0 |
| Деталь: | LEVER PRESSING SPRING |
| Парткод: | 50GA 1842 0 |
| Деталь: | FIXING PRESSING SPRING |
| Парткод: | 50GA 1843 0 |
| Деталь: | LOWER PAPER FEED DRIVE ASSY |
| Парткод: | 50GA -169 2 |
| Деталь: | CLUTCH |
| Парткод: | 9322 1500 12 |
| Деталь: | BRACKET |
| Парткод: | 4030 3051 01 |
| Деталь: | BUSHING |
| Парткод: | 4131 3003 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3067 01 |
| Деталь: | BRACKET ASSY |
| Парткод: | 4030 R705 00 |
| Деталь: | PULLEY |
| Парткод: | 1155 2518 01 |
| Деталь: | TIMING BELT 324L |
| Парткод: | 4030 3054 01 |
| Деталь: | PAPER FEED STAKE ASSY |
| Парткод: | 50GA -176 0 |
| Деталь: | Paper feed Gear 19/33T |
| Парткод: | 50GA 1640 1E |
| Деталь: | SHAFT |
| Парткод: | 4030 3057 01 |
| Деталь: | GEAR 30T |
| Парткод: | 4030 3060 01 |
| Деталь: | PULLEY |
| Парткод: | 1067 2513 01 |
| Деталь: | GEAR 24T |
| Парткод: | 4030 3059 01 |
| Деталь: | PULLEY 28/36T |
| Парткод: | 4030 3053 01 |
| Деталь: | COLLAR |
| Парткод: | 4030 3055 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3052 01 |
| Деталь: | FIXING INPUT SHAFT |
| Парткод: | 50GA 1811 1G |
| Деталь: | Drive Panel /G |
| Парткод: | 50GA 1507 0F |
| Деталь: | Fixing Idling Shaft |
| Парткод: | 50GA 1822 0D |
| Деталь: | Fixing Idling Shaft /2 |
| Парткод: | 50GA 1824 1E |
| Деталь: | CAULKING ASSY |
| Парткод: | 50GA -186 1G |
| Деталь: | Drive Panel /D |
| Парткод: | 50GA 1504 0E |
| Деталь: | DRIVE PRESSING STAY |
| Парткод: | 50GA 1509 1 |
| Деталь: | PLYSLIDER 6 |
| Парткод: | 1900 4141 0 |
| Деталь: | MIRROR MOUNT PLATE 2 ASSY |
| Парткод: | 26NA R711 00 |
| Деталь: | BEARING |
| Парткод: | 26NA 6194 0 |
| Деталь: | OPTICS SLIDE PLATE FRONT |
| Парткод: | 26NA 6156 0 |
| Деталь: | Slide Part |
| Парткод: | 26NA 6138 0 |
| Деталь: | MIRROR SUPPORT PLATE FRONT |
| Парткод: | 26NA 6153 1 |
| Деталь: | MIRROR PRESSURE SPRING 4 |
| Парткод: | 26NA 6161 0 |
| Деталь: | OPTICS MIRROR 2 |
| Парткод: | 26NA 6154 0 |
| Деталь: | MIRROR PRESSURE SPRING 3 |
| Парткод: | 26NA 6160 0 |
| Деталь: | MIRROR REINFORCE PART 1 |
| Парткод: | 26TA 6252 1 |
| Деталь: | STICKING PART1 |
| Парткод: | 26TA 6253 0 |
| Деталь: | MIRROR SUPPORT PLATE REAR |
| Парткод: | 26NA 6239 1 |
| Деталь: | OPTICS SLIDE PLATE REAR |
| Парткод: | 26NA 6155 1 |
| Деталь: | WIRING GUIDE PART 2 |
| Парткод: | 26NA 6159 0 |
| Деталь: | REFLECT MIRROR |
| Парткод: | 26NA 6137 0 |
| Деталь: | EXPOSURE LAMP |
| Парткод: | 40LA 8301 1 |
| Деталь: | OPTICAL WIRE FRONT |
| Парткод: | 50GA 6122 0 |
| Деталь: | MIRROR MOUNT PLATE 1 |
| Парткод: | 26NA 6131 0 |
| Деталь: | MIRROR ADJUSTING SCREW |
| Парткод: | 26NA 6206 0 |
| Деталь: | OPTICS WIRE REAR |
| Парткод: | 40LA 6121 0 |
| Деталь: | POWERING BOARD ASSY |
| Парткод: | 26NA -951 2E |
| Деталь: | OPTICS MIRROR 1 |
| Парткод: | 26NA 6134 0 |
| Деталь: | MIRROR PRESSURE SPRING |
| Парткод: | 26NA 6141 0 |
| Деталь: | WIRING GUIDE PART 1 |
| Парткод: | 26NA 6139 0 |
| Деталь: | WIRE DRIVE PULLEY |
| Парткод: | 50GA 6120 0 |
| Деталь: | BEARING/8 |
| Парткод: | 56QA 7507 0 |
| Деталь: | PULLEY FIXED PLATE |
| Парткод: | 26NA 6175 1 |
| Деталь: | MOTOR BELT 160L |
| Парткод: | 40LA 6193 0 |
| Деталь: | DRIVING PULLEY 55T |
| Парткод: | 40LA 6192 0 |
| Деталь: | Drive Shaft |
| Парткод: | 40LA 6119 0 |
| Деталь: | DOOR |
| Парткод: | 4030 3111 06 |
| Деталь: | SEPARATION ROLLER ASSY |
| Парткод: | 4030 0151 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3079 01 |
| Деталь: | LEVER |
| Парткод: | 4030 3078 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3017 03 |
| Деталь: | BRACKET |
| Парткод: | 4030 3014 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3039 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3013 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3077 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3105 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3124 03 |
| Деталь: | TENSION SPRING |
| Парткод: | 4030 3125 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3129 03 |
| Деталь: | BRACKET |
| Парткод: | 4030 3025 02 |
| Деталь: | GUIDE |
| Парткод: | 4030 3036 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4030 3095 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3107 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4030 3114 02 |
| Деталь: | TENSION SPRING |
| Парткод: | 4030 3116 01 |
| Деталь: | LEVER |
| Парткод: | 4030 3135 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3117 02 |
| Деталь: | HANDLE |
| Парткод: | 4030 3130 02 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 1149 3454 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3123 01 |
| Деталь: | ROLL |
| Парткод: | 4030 3122 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3121 01 |
| Деталь: | EARTH GROUND |
| Парткод: | 4030 3134 03 |
| Деталь: | LEVER |
| Парткод: | 4030 3115 01 |
| Деталь: | SCREW |
| Парткод: | 4163 5293 01 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3037 01 |
| Деталь: | SPACER |
| Парткод: | 4040 5610 00 |
| Деталь: | SPACER |
| Парткод: | 4040 5612 00 |
| Деталь: | COVER |
| Парткод: | 4030 3442 02 |
| Деталь: | LABEL |
| Парткод: | 4030 3754 01 |
| Деталь: | LIFTING PLATE |
| Парткод: | 4030 3409 14 |
| Деталь: | SEAL |
| Парткод: | 4030 3476 01 |
| Деталь: | SEAL |
| Парткод: | 4030 3477 01 |
| Деталь: | WEIGHT |
| Парткод: | 4030 3484 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3425 01 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3456 01 |
| Деталь: | COLLAR |
| Парткод: | 4030 3481 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3457 03 |
| Деталь: | TENSION SPRING |
| Парткод: | 4030 3428 01 |
| Деталь: | SEAL |
| Парткод: | 4030 3489 01 |
| Деталь: | Guide Sheet |
| Парткод: | A0R5 6003 00 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4030 3402 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3474 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3404 01 |
| Деталь: | HOLDER |
| Парткод: | 4131 3053 02 |
| Деталь: | SPACER |
| Парткод: | 4030 3492 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3475 01 |
| Деталь: | SEPARATION ROLLER |
| Парткод: | 4034 0151 01 |
| Деталь: | CUSHION |
| Парткод: | 4030 3448 01 |
| Деталь: | GUIDE |
| Парткод: | 4040 3495 01 |
| Деталь: | GUIDE |
| Парткод: | 4040 3496 01 |
| Деталь: | TENSION SPRING |
| Парткод: | 4030 3438 01 |
| Деталь: | Multi Bypath UNIT |
| Парткод: | 50GA -420 0 |
| Деталь: | Multi Bypath UNIT |
| Парткод: | 50GE -420 0 |
| Деталь: | Multi Bypath UNIT |
| Парткод: | 50GF -420 0 |
| Деталь: | BRACKET |
| Парткод: | 4030 3424 01 |
| Деталь: | FRICTION SHEET |
| Парткод: | 4687 3281 01 |
| Деталь: | COVER PLATE |
| Парткод: | 50GA 7380 0 |
| Деталь: | HIGH VOLTAGE CONNECTING PLATE S ASS Y |
| Парткод: | 50GA -751 0 |
| Деталь: | ELECTRODE CONNECTING SPRING A |
| Парткод: | 26NA 7325 1 |
| Деталь: | CONTACT PEDESTAL 1 |
| Парткод: | 50GA 7342 0 |
| Деталь: | HIGH VOLTAGE CONNECTING PLATE B ASS Y |
| Парткод: | 26NA R712 00 |
| Деталь: | DC POWER SOURCE 1 |
| Парткод: | 50GA 8451 0 |
| Деталь: | DC POWER SOURCE 1 |
| Парткод: | 50GF 8451 1 |
| Деталь: | HIGH VOLTAGE POWER SOURCE |
| Парткод: | 50GA 8401 0 |
| Деталь: | HV MOUNTING PEDESTAL |
| Парткод: | 50GA 7341 0 |
| Деталь: | WIRING GUIDE PART 1 |
| Парткод: | 50GA 7347 0 |
| Деталь: | PROCESS SENSOR |
| Парткод: | 27LA 8803 1 |
| Деталь: | Wiring Guide Part /2 |
| Парткод: | 50GA 7348 2E |
| Деталь: | CONTACT PLATE A |
| Парткод: | 50GA 7349 1 |
| Деталь: | HV COVER PART |
| Парткод: | 50GA 7376 1 |
| Деталь: | CORD COVER |
| Парткод: | 50GA 7359 0 |
| Деталь: | Door switch |
| Парткод: | 40AA 8501 1 |
| Деталь: | SWITCH GUIDE PLATE A |
| Парткод: | 50GA 7350 0 |
| Деталь: | SWITCH MOUNTING PLATE |
| Парткод: | 50GA 7351 0 |
| Деталь: | WIRING MOUNTING PLATE |
| Парткод: | 50GA 7343 0 |
| Деталь: | Insulating Sheet /1 |
| Парткод: | 50GA 1330 00 |
| Деталь: | Insulating Sheet /2 |
| Парткод: | 50GA 1331 00 |
| Деталь: | SPACER |
| Парткод: | 50GA 1332 00 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 2006 01 |
| Деталь: | REINFORCE PLATE SPACER |
| Парткод: | 4030 2005 02 |
| Деталь: | SPACER |
| Парткод: | 4030 2081 01 |
| Деталь: | RAIL |
| Парткод: | 4030 2008 02 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 2007 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 2011 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 2042 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 2010 01 |
| Деталь: | CONTACT |
| Парткод: | 1164 2155 01 |
| Деталь: | STAY |
| Парткод: | 4030 2026 03 |
| Деталь: | RAIL |
| Парткод: | 4030 2029 02 |
| Деталь: | HOLDER |
| Парткод: | 4040 6205 00 |
| Деталь: | STOPPER |
| Парткод: | 4030 2038 02 |
| Деталь: | LABEL |
| Парткод: | 4030 7315 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 2041 02 |
| Деталь: | STOP RING |
| Парткод: | 4348 6206 00 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4030 3112 02 |
| Деталь: | BUSHING |
| Парткод: | 4131 3532 02 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 4037 0906 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3128 01 |
| Деталь: | FRAME |
| Парткод: | 4030 3042 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 3018 01 |
| Деталь: | PIN |
| Парткод: | 1200 5212 04 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3031 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3019 02 |
| Деталь: | COLLAR |
| Парткод: | 1134 3041 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3016 12 |
| Деталь: | BUSHING |
| Парткод: | 4131 3003 01 |
| Деталь: | ROLLER |
| Парткод: | 4030 3005 01 |
| Деталь: | CLUTCH |
| Парткод: | 4030 3034 01 |
| Деталь: | GEAR 30T |
| Парткод: | 4425 3013 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3002 02 |
| Деталь: | GEAR 29T |
| Парткод: | 4030 3008 01 |
| Деталь: | PAPER FEED SHAFT HOLDER |
| Парткод: | 50GA 4005 0 |
| Деталь: | CONVEYANCE CLUTCH |
| Парткод: | 50GA 8202 0 |
| Деталь: | GEAR 32T |
| Парткод: | 4425 3016 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3003 01 |
| Деталь: | PIN |
| Парткод: | 1067 2501 01 |
| Деталь: | SHAFT |
| Парткод: | 4040 3097 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3030 01 |
| Деталь: | BUSHING |
| Парткод: | 1065 3086 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3022 01 |
| Деталь: | LEVER |
| Парткод: | 4030 3011 03 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3012 01 |
| Деталь: | SHAFT |
| Парткод: | 4040 3096 01 |
| Деталь: | CLUTCH |
| Парткод: | 9322 1500 12 |
| Деталь: | WASHER |
| Парткод: | 4030 3092 01 |
| Деталь: | Gear 33T |
| Парткод: | 4030 3064 01 |
| Деталь: | SLEEVE |
| Парткод: | 4030 3069 01 |
| Деталь: | GEAR 26T |
| Парткод: | 4030 3068 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3063 01 |
| Деталь: | ROLLER |
| Парткод: | 4030 3021 01 |
| Деталь: | FRAME |
| Парткод: | 4030 3010 02 |
| Деталь: | LOWER PAPER ASSY |
| Парткод: | 50GA -400 0 |
| Деталь: | FRAME ASSY |
| Парткод: | 50GA -402 0 |
| Деталь: | LEVER |
| Парткод: | 4030 3430 01 |
| Деталь: | CAM |
| Парткод: | 4030 3417 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3416 02 |
| Деталь: | HOLDER |
| Парткод: | 4030 3464 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3444 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3445 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3465 01 |
| Деталь: | PIN |
| Парткод: | 1067 2502 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3479 01 |
| Деталь: | BUSHING |
| Парткод: | 4030 3093 01 |
| Деталь: | ROLLER |
| Парткод: | 4131 3001 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3434 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 4037 0906 01 |
| Деталь: | BRACKET |
| Парткод: | 4040 3443 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3447 01 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3427 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3401 13 |
| Деталь: | GEAR 20/25T |
| Парткод: | 4030 3441 01 |
| Деталь: | BRACKET ASSY |
| Парткод: | 4030 R708 00 |
| Деталь: | GEAR 25T |
| Парткод: | 1075 2565 01 |
| Деталь: | GEAR 20T |
| Парткод: | 1300 3322 17 |
| Деталь: | BUSHING |
| Парткод: | 4658 3517 01 |
| Деталь: | GEAR 16/30T |
| Парткод: | 4030 3467 01 |
| Деталь: | CLUTCH |
| Парткод: | 9J06 M201 00 |
| Деталь: | SOLENOID |
| Парткод: | 9J06 M200 00 |
| Деталь: | HOLDER |
| Парткод: | 4030 3422 01 |
| Деталь: | SHIELD PLATE |
| Парткод: | 4030 3478 02 |
| Деталь: | DRUM |
| Парткод: | 4131 3007 02 |
| Деталь: | WASHER |
| Парткод: | 4131 4128 01 |
| Деталь: | MEMBER |
| Парткод: | 4030 3429 02 |
| Деталь: | BRACKET ASSY |
| Парткод: | 4030 R707 00 |
| Деталь: | BRACKET |
| Парткод: | 4030 3432 07 |
| Деталь: | CUSHION |
| Парткод: | 4040 3497 01 |
| Деталь: | RATCHET |
| Парткод: | 4030 3420 02 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3419 01 |
| Деталь: | GEAR 30T |
| Парткод: | 4131 3004 02 |
| Деталь: | PAPER LIFT UP LEVER BUSHING |
| Парткод: | 1921 4171 0 |
| Деталь: | PIN A D2X10 |
| Парткод: | 4660 7801 0 |
| Деталь: | FIXING DRIVE GEAR /D 18/44T |
| Парткод: | 26NA 5429 0 |
| Деталь: | CLEANER GEAR A 18T |
| Парткод: | 26NA 5346 0 |
| Деталь: | FIXING DRIVE GEAR /D 14/44T |
| Парткод: | 50GA 5429 0 |
| Деталь: | FIXING CLEANER SHAFT HOLDER C |
| Парткод: | 26NA 5384 0 |
| Деталь: | LEVER SPRING |
| Парткод: | 26NA 5329 0 |
| Деталь: | FIXING CLEANING LEVER |
| Парткод: | 50GA 5404 0 |
| Деталь: | FIXING IDLING GEAR B 15T |
| Парткод: | 50GA 5470 0 |
| Деталь: | Fixing Idling Gear /A 14/20T |
| Парткод: | 50GA 5469 0 |
| Деталь: | FIXING INPUT GEAR /2 19T |
| Парткод: | 50GA 5473 1E |
| Деталь: | FIXING INPUT GEAR 19T |
| Парткод: | 50GA 5493 1E |
| Деталь: | FUSING SPACER |
| Парткод: | 50GA 7296 00 |
| Деталь: | GEAR REGULATING SHAFT |
| Парткод: | 50GA 5485 0 |
| Деталь: | FIXING INPUT GEAR ASSY |
| Парткод: | 50GA -546 1 |
| Деталь: | FIXING UNIT |
| Парткод: | 42GA -530 0 |
| Деталь: | FIXING UNIT |
| Парткод: | 42GE -530 0 |
| Деталь: | FIXING UNIT |
| Парткод: | 42GF -530 0 |
| Деталь: | Lever Indicating Label /Front |
| Парткод: | 50GA 9747 0E |
| Деталь: | HIGH TEMP CAUTION LABEL |
| Парткод: | 50GA 9746 0 |
| Деталь: | Lever Indicating Label /Rear |
| Парткод: | 50GA 9748 0E |
| Деталь: | Neutralizing Brush |
| Парткод: | 26NA 5414 0 |
| Деталь: | FIXING GUIDE SCREW |
| Парткод: | 26NA 5419 0 |
| Деталь: | Idling Shaft /D |
| Парткод: | 50GA 5483 0D |
| Деталь: | MOUNTING PLATE |
| Парткод: | 50GA 5484 0 |
| Деталь: | AUXILIARY PART CAULKING |
| Парткод: | 50GA -543 0 |
| Деталь: | Cleaner Idling Shaft /A |
| Парткод: | 50GA 5330 0D |
| Деталь: | AUXILIARY PART |
| Парткод: | 50GA 5417 0 |
| Деталь: | GEAR /20T |
| Парткод: | 4040 5758 01 |
| Деталь: | LEVER STOPPER PART |
| Парткод: | 26NA 5424 0 |
| Деталь: | EARTH GROUND |
| Парткод: | 4030 3223 03 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3207 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4037 3213 12 |
| Деталь: | GUIDE |
| Парткод: | 4030 3227 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3228 12 |
| Деталь: | WASHER |
| Парткод: | 4011 3021 01 |
| Деталь: | WASHER |
| Парткод: | 4011 3020 01 |
| Деталь: | BUSHING |
| Парткод: | 1274 3603 01 |
| Деталь: | REINFORCE PLATE |
| Парткод: | 4030 3229 02 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4030 3212 01 |
| Деталь: | GUIDE |
| Парткод: | 4658 3048 01 |
| Деталь: | LABEL CARRYING CAPACITY |
| Парткод: | 4002 7306 01 |
| Деталь: | STOPPER |
| Парткод: | 4658 3049 01 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4030 3214 02 |
| Деталь: | GUIDE |
| Парткод: | 4030 3215 01 |
| Деталь: | GEAR 14T |
| Парткод: | 4658 3012 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | 4030 3211 02 |
| Деталь: | KNOB |
| Парткод: | 4037 3204 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4498 3825 01 |
| Деталь: | LEVER |
| Парткод: | 4128 3823 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3217 01 |
| Деталь: | FRICTION SHEET |
| Парткод: | 4030 3226 01 |
| Деталь: | LIFTING PLATE |
| Парткод: | 4030 3203 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3222 03 |
| Деталь: | LEVER |
| Парткод: | 4030 3206 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3205 01 |
| Деталь: | BUSHING |
| Парткод: | 0992 3014 01 |
| Деталь: | LEVER |
| Парткод: | 4030 3221 01 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4030 3224 02 |
| Деталь: | Label Paper supply |
| Парткод: | 4040 7304 01 |
| Деталь: | FRONT COVER CASSETTE |
| Парткод: | 4030 3202 02 |
| Деталь: | LABEL CASSETTE CNT 2 |
| Парткод: | 4030 7303 02 |
| Деталь: | LABEL CASSETTE CNT 1 |
| Парткод: | 4030 7302 02 |
| Деталь: | SHAFT |
| Парткод: | 4498 3826 01 |
| Деталь: | LABEL NEAR EMPTY |
| Парткод: | 4030 7301 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 3218 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3216 01 |
| Деталь: | LEVER |
| Парткод: | 4002 3108 01 |
| Деталь: | STOPPER |
| Парткод: | 4498 3469 01 |
| Деталь: | CASSETTE |
| Парткод: | 4030 3201 09 |
| Деталь: | SCREW |
| Парткод: | 4498 3834 01 |
| Деталь: | HANDLE CASSETTE |
| Парткод: | 4036 3025 01 |
| Деталь: | ASSY REGULATING |
| Парткод: | 4040 0156 0D |
| Деталь: | PART /A REGULATING |
| Парткод: | 50GA 4008 00 |
| Деталь: | PART /B |
| Парткод: | 50GA 4009 00 |
| Деталь: | SPACER |
| Парткод: | 4030 P002 00 |
| Деталь: | FRICTION PLATE |
| Парткод: | A00J 6234 00 |
| Деталь: | STOPPER |
| Парткод: | 4030 6214 00 |
| Деталь: | PLATE NUT |
| Парткод: | 4030 6215 00 |
| Деталь: | STOPPER |
| Парткод: | 4030 3238 00 |
| Деталь: | FIXING CLEANER ASSY |
| Парткод: | 50GA -540 0 |
| Деталь: | FIXING CLEANER ASSY |
| Парткод: | 42GA -540 0 |
| Деталь: | CONVEYANCE GUIDE PART RIGHT |
| Парткод: | 50GA 5488 0 |
| Деталь: | FIXING GUIDE SCREW |
| Парткод: | 27LA 5419 0 |
| Деталь: | FIXING CLEANING BUSHING |
| Парткод: | 50GA 5351 0 |
| Деталь: | CLEANER LOCK GEAR |
| Парткод: | 50GA 5460 0 |
| Деталь: | REGULATING PLATE FRONT ASSY |
| Парткод: | 40LA R707 00 |
| Деталь: | WEB |
| Парткод: | 50GA 5343 0 |
| Деталь: | FIXING CLEANER ROLLER |
| Парткод: | 27LA 5383 0 |
| Деталь: | CLEANER PRESSURE SPRING |
| Парткод: | 26NA 5361 0 |
| Деталь: | FIXING CLEANER SHAFT HOLDER A |
| Парткод: | 26NA 5349 0 |
| Деталь: | REGULATING PLATE REAR ASSY |
| Парткод: | 40LA R708 00 |
| Деталь: | CLEANER DRIVING SHAFT ASSY |
| Парткод: | 50GA -556 0 |
| Деталь: | FIXING CLEANER SHAFT HOLDER A |
| Парткод: | 26NA 5430 0 |
| Деталь: | CLEANER GEAR B 34T |
| Парткод: | 50GA 5347 0 |
| Деталь: | ROLLER |
| Парткод: | 4030 5803 01 |
| Деталь: | BUSHING |
| Парткод: | 4030 5811 01 |
| Деталь: | ROLL |
| Парткод: | 4030 5841 01 |
| Деталь: | PROTECTION PART |
| Парткод: | 50GA 5472 1 |
| Деталь: | BUSHING |
| Парткод: | 4030 5834 02 |
| Деталь: | PAPER EXIT GEAR 18T |
| Парткод: | 50GA 5471 0 |
| Деталь: | STOPPER RING |
| Парткод: | 1164 3065 01 |
| Деталь: | FIXING PRESSING SPRING |
| Парткод: | 50GA 5045 0 |
| Деталь: | HIGH TEMP CAUTION LABEL |
| Парткод: | 50GA 9746 0 |
| Деталь: | ADU DOOR /REAR |
| Парткод: | 50GA 5004 1F |
| Деталь: | ADU OPEN CLOSE BELT |
| Парткод: | 50GA 5015 0 |
| Деталь: | LOCK SPRING |
| Парткод: | 50GA 5062 00 |
| Деталь: | ADU DOOR FRONT |
| Парткод: | 50GA 5005 0 |
| Деталь: | PAWL |
| Парткод: | 4030 2021 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 2023 01 |
| Деталь: | PAWL |
| Парткод: | 4030 2022 01 |
| Деталь: | MAGNET CATCH |
| Парткод: | 40AA 3229 0 |
| Деталь: | ADU EARTH PLATE 1 |
| Парткод: | 50GA 5027 0 |
| Деталь: | FIXING COVER PLATE |
| Парткод: | 50GA 5028 0 |
| Деталь: | BELT REINFORCE PLATE |
| Парткод: | 50GA 5014 0 |
| Деталь: | ADU REINFORCE PLATE |
| Парткод: | 50GA 5009 0 |
| Деталь: | HOLDER |
| Парткод: | 4011 3012 01 |
| Деталь: | LEVER |
| Парткод: | 4030 3091 01 |
| Деталь: | PWB ASSY |
| Парткод: | 4037 0104 01 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4002 3131 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4002 3110 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3047 02 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 4037 0906 01 |
| Деталь: | MOTOR |
| Парткод: | 9J06 M103 00 |
| Деталь: | BRACKET |
| Парткод: | 4030 3208 02 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4030 3224 02 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3081 01 |
| Деталь: | HOLDER |
| Парткод: | 4030 3083 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3048 02 |
| Деталь: | BRACKET |
| Парткод: | 4030 3049 01 |
| Деталь: | BRACKET |
| Парткод: | 4030 3046 03 |
| Деталь: | LIFTING STAY |
| Парткод: | 50GA 6271 01 |
| Деталь: | Read Cover /Left |
| Парткод: | 50GA 1224 0E |
| Деталь: | SIDE COVER REAR |
| Парткод: | 50GA 1204 0 |
| Деталь: | GLASS MOUNTING PLATE 1 |
| Парткод: | 50GA 1221 0 |
| Деталь: | GLASS MOUNTING PLATE /2 |
| Парткод: | 50GA 1313 0E |
| Деталь: | Read Cover /Front |
| Парткод: | 50GA 1307 0F |
| Деталь: | ADF DETECTION ACTUATOR |
| Парткод: | 50GA 6182 0 |
| Деталь: | DETECTING SPRING |
| Парткод: | 26NA 6213 0 |
| Деталь: | SPRING REGULATING SHEET |
| Парткод: | 26NA 1255 0 |
| Деталь: | Read Cover /Rear |
| Парткод: | 50GA 1223 1E |
| Деталь: | READ COVER RIGHT |
| Парткод: | 50GA 1225 0 |
| Деталь: | WORKING TABLE |
| Парткод: | 56RE R701 00 |
| Деталь: | OPE. UNIT UNIT |
| Парткод: | 50GA 8703 0F |
| Деталь: | OPE. UNIT UNIT |
| Парткод: | 50GE 8703 0F |
| Деталь: | OPE. UNIT UNIT |
| Парткод: | 50GF 8703 0F |
| Деталь: | COVER PANEL LOWER |
| Парткод: | 4037 1398 01 |
| Деталь: | CAP |
| Парткод: | 1171 1321 01 |
| Деталь: | OPERATION UNIT COVER LOWER |
| Парткод: | 50GA 7099 0 |
| Деталь: | TORSION SPRING |
| Парткод: | 4581 1379 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4581 1382 01 |
| Деталь: | LEVER |
| Парткод: | 4036 1381 03 |
| Деталь: | TENSION SPRING |
| Парткод: | 4581 1389 01 |
| Деталь: | COUPLING |
| Парткод: | 4036 1383 02 |
| Деталь: | POSITIONING PLATE |
| Парткод: | 4036 1390 01 |
| Деталь: | BRACKET |
| Парткод: | 4036 1387 02 |
| Деталь: | BRACKET |
| Парткод: | 4036 1388 01 |
| Деталь: | BRACKET |
| Парткод: | 4036 1385 01 |
| Деталь: | OPE UNIT MOUNTING PLATE/RIGHT |
| Парткод: | 50GA 7060 0 |
| Деталь: | OPE UNIT MOUNTING PLATE/LEFT |
| Парткод: | 50GA 7080 0 |
| Деталь: | GUIDE |
| Парткод: | 4641 4504 02 |
| Деталь: | BUSHING |
| Парткод: | 1139 3169 01 |
| Деталь: | Paper exit Roller /1 |
| Парткод: | 50GA 8601 00 |
| Деталь: | PIN |
| Парткод: | 4131 2536 02 |
| Деталь: | GEAR |
| Парткод: | 4030 3826 01 |
| Деталь: | ROLL |
| Парткод: | 4426 4411 02 |
| Деталь: | PLATE SPRING |
| Парткод: | 4030 3817 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3808 01 |
| Деталь: | BUSHING |
| Парткод: | 4030 3823 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3806 02 |
| Деталь: | COLLAR |
| Парткод: | 1134 3041 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3811 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3812 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3813 01 |
| Деталь: | GUIDE |
| Парткод: | 4030 3814 01 |
| Деталь: | SHAFT |
| Парткод: | 4030 3829 01 |
| Деталь: | TORSION SPRING |
| Парткод: | 4030 3819 01 |
| Деталь: | ACTUATOR |
| Парткод: | 4030 3818 02 |
| Деталь: | GUIDE |
| Парткод: | 4030 3807 03 |
| Деталь: | TONER CARTRIDGE PRESSING ASSY |
| Парткод: | 50GA -332 1 |
| Деталь: | TONER SUPPLY OPEN CLOSE SPRING |
| Парткод: | 50GA 3326 0 |
| Деталь: | CARTRIDGE PRESSING HANDLE B |
| Парткод: | 50GA 3312 0 |
| Деталь: | CARTRIDGE PRESSING SPRING 2 |
| Парткод: | 26NA 3287 0 |
| Деталь: | PRESSING ASSY |
| Парткод: | 50GA -333 0 |
| Деталь: | CARTRIDGE PRESSING SPRING 3 |
| Парткод: | 26TA 3298 0 |
| Деталь: | CARTRIDGE REGULATING PLATE |
| Парткод: | 26TA 3296 0 |
| Деталь: | CARTRIDGE REGULATING SPRING |
| Парткод: | 26TA 3297 0 |
| Деталь: | Cover Part |
| Парткод: | 26TA 3299 0 |
| Деталь: | TONER SUPPLY GUIDE PART ASSY |
| Парткод: | 50GA -334 0 Old |
| Деталь: | TONER SUPPLY GUIDE PART ASSY |
| Парткод: | 50GA -334 1 |
| Деталь: | CARTRIDGE PRESSING HANDLE |
| Парткод: | 50GA 3285 1 |
| Деталь: | TONER SUPPLY SUPPORT SHAFT |
| Парткод: | 50GA 3311 0 |
| Деталь: | TONER SUPPLY SUPPORT PLATE |
| Парткод: | 50GA 3310 0 |
| Деталь: | Cartridge Pressing Pedestal |
| Парткод: | 50GA 3282 2F |
| Деталь: | TONER GUIDE SHEET |
| Парткод: | 26NA 2020 0 |
| Деталь: | TONER DETECTED BOARD ASSY |
| Парткод: | 26NA -918 2E |
| Деталь: | WIRING GUIDE PART |
| Парткод: | 26NA 2095 0 |
| Деталь: | BLADE SEAL BLOCK R ASSY |
| Парткод: | 26NA R703 00 |
| Деталь: | BLADE SEAL BLOCK 2 ASSY |
| Парткод: | 26NA R706 00 |
| Деталь: | ELECTRODE PRESSING SPRING |
| Парткод: | 40LA 2167 0 |
| Деталь: | DRUM SHAFT HOLDER F |
| Парткод: | 26NA 2048 0 |
| Деталь: | Shaft holder Support Part |
| Парткод: | 26NA 2025 0F |
| Деталь: | REGISTRATION ASSY |
| Парткод: | 50GA -380 1 |
| Деталь: | REGISTRATION CLEANER ASSY |
| Парткод: | 50GA -382 0 |
| Деталь: | Regist Main body |
| Парткод: | 50GA 3854 1F |
| Деталь: | SENSOR 2 |
| Парткод: | 13QA 8552 1 |
| Деталь: | REGISTRATION ROLLER B |
| Парткод: | 50GA 3849 0 |
| Деталь: | REGISTRATION ROLLER A |
| Парткод: | 50GA 3848 0 |
| Деталь: | PAPER FEED CONNECTING ROLLER |
| Парткод: | 50GA 3865 0E |
| Деталь: | SHAFT POSITIONING PART |
| Парткод: | 12QV 4066 0 |
| Деталь: | SHAFT HOLDER 2 |
| Парткод: | 13QA 7602 1 |
| Деталь: | REGISTRATION UNIT SHAFT HOLDER /2 |
| Парткод: | 26NA 4537 1 |
| Деталь: | REGISTRATION UNIT SPRING |
| Парткод: | 26NA 4514 1 |
| Деталь: | PAPER FEED SHAFT HOLDER |
| Парткод: | 4660 7602 0 |
| Деталь: | REGISTRATION UNIT SHAFT HOLDER /1 |
| Парткод: | 26NA 4536 0 |
| Деталь: | PAPER FEED SLIDE BUSHING |
| Парткод: | 26NA 4082 0 |
| Деталь: | Drum Caution Label |
| Парткод: | 50GA 9749 0E |
| Деталь: | CONVEYANCE DRIVE CLUTCH |
| Парткод: | 57AA 8203 0 |
| Деталь: | CONVEYANCE CLUTCH |
| Парткод: | 50GA 8202 0 |
| Деталь: | Paper feed Regulating Sheet /Middle |
| Парткод: | 50GA 3869 1F |
| Деталь: | REGIST SUPPORT PANEL FRONT |
| Парткод: | 50GA 3813 0 |
| Деталь: | REGIST GUIDE SHEET FRONT |
| Парткод: | 50GA 3879 0 |
| Деталь: | REJIST GUIDE SHEET REAR |
| Парткод: | 50GA 3861 0 |
| Деталь: | Regist Guide Plate |
| Парткод: | 50GA 3868 0E |
| Деталь: | REGIST SUPPORT PANEL /REAR |
| Парткод: | 50GA 3867 0E |
| Деталь: | Paper feed Regulating Sheet |
| Парткод: | 50GA 3858 1F |
| Деталь: | FIXING ROLLER LOWER |
| Парткод: | 50GA 5304 0 |
| Деталь: | FIXING ROLLER LOWER |
| Парткод: | 42GA 5304 0 |
| Деталь: | FIXING ROLLER UPPER |
| Парткод: | 50GA 5303 0 |
| Деталь: | FIXING ROLLER UPPER |
| Парткод: | 42GA 5303 0 |
| Деталь: | FIXING HEATER /1 |
| Парткод: | 50GA M32A 00 |
| Деталь: | FIXING HEATER 1 |
| Парткод: | 50GE 8302 1 |
| Деталь: | FIXING HEATER 1 |
| Парткод: | 50GF 8302 1 |
| Деталь: | FIXING HEATER /2 |
| Парткод: | 50GA M33A 00 |
| Деталь: | FIXING HEATER 2 |
| Парткод: | 50GE 8303 1 |
| Деталь: | FIXING HEATER 2 |
| Парткод: | 50GF 8303 1 |
| Деталь: | TERMINAL PEDESTAL A |
| Парткод: | 26NA 5377 0 |
| Деталь: | TERMINAL FIXING SCREW |
| Парткод: | 26NA 5423 0 |
| Деталь: | TERMINAL PLATE A |
| Парткод: | 26NA 5374 0 |
| Деталь: | TERMINAL PLATE 1 |
| Парткод: | 40AA 5347 0 |
| Деталь: | FIXING GEAR 46T |
| Парткод: | 50GA 5406 0 |
| Деталь: | FIXING GEAR 39T |
| Парткод: | 42GA 5406 0 |
| Деталь: | FIXING FIXED PART |
| Парткод: | 26NA 5362 0 |
| Деталь: | HEAT INSULATING SLEEVE A |
| Парткод: | 26NA 5372 0 |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 5371 2 |
| Деталь: | LAMP SUPPORT PART REAR |
| Парткод: | 50GA 5390 0 |
| Деталь: | LAMP SUPPORT PART REAR |
| Парткод: | 42GA 5390 0 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 50GA 5360 0 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 42GA 5360 0 |
| Деталь: | FIXING BEARING LOWER |
| Парткод: | 50GA 5359 0 |
| Деталь: | REINFORCE STAY |
| Парткод: | 50GA 5454 0 |
| Деталь: | PRESSING ARM /FRONT |
| Парткод: | 50GA 5307 0 |
| Деталь: | PRESSING ARM /FRONT |
| Парткод: | 42GA 5307 0 |
| Деталь: | PRESSING ARM /REAR |
| Парткод: | 50GA 5308 0 |
| Деталь: | PRESSING ARM /REAR |
| Парткод: | 42GA 5308 0 |
| Деталь: | LAMP SUPPORT PART /FRONT |
| Парткод: | 50GA 5389 0 |
| Деталь: | DEVELOPING COVER PART A ASSY |
| Парткод: | 26NA R708 00 |
| Деталь: | DEVELOPING ELECTRODE COVER |
| Парткод: | 26NA 3049 0 |
| Деталь: | DEVELOPING ELECTRODE STAY |
| Парткод: | 26NA 3047 0 |
| Деталь: | DEVELOPMENT WIRING |
| Парткод: | 40LA 9025 0 |
| Деталь: | SCATTER PREVENTING SHEET 3 |
| Парткод: | 26NA 3045 0 |
| Деталь: | SCATTER PREVENTING SHEET 4 |
| Парткод: | 26NA 3072 0 |
| Деталь: | L DETECTING SEAL TONER |
| Парткод: | 0294 2064 0 |
| Деталь: | DENSITY SENSOR DEVELOPING |
| Парткод: | 26NA 8804 1 |
| Деталь: | RAIL /LEFT SCATTER |
| Парткод: | 50GA 3074 0 |
| Деталь: | PREVENTING SHEET /A |
| Парткод: | 50GA 3157 0 |
| Деталь: | DEVELOPING RAIL /RIGHT |
| Парткод: | 50GA 3071 0 |
| Деталь: | MOUNT SCREW |
| Парткод: | 26NA 5403 0 |
| Деталь: | FIXING POWER SUPPLY WIRING |
| Парткод: | 50GA 9005 1 |
| Деталь: | TERMINAL FIXING SCREW |
| Парткод: | 26NA 5423 0 |
| Деталь: | ROLLER COOLING DUCT FRONT |
| Парткод: | 50GA 5452 0 |
| Деталь: | ROLLER COOLING DUCT REAR |
| Парткод: | 50GA 5453 0 |
| Деталь: | FIXING SENSOR ASSY |
| Парткод: | 50GA -544 0 |
| Деталь: | FUSE MOUNTING PLATE ASSY 26NA 535 |
| Парткод: | SP00 -011 2 |
| Деталь: | RELEASE LEVER FRONT |
| Парткод: | 50GA 5451 0 |
| Деталь: | RELEASE LEVER FRONT |
| Парткод: | 42GA 5451 0 |
| Деталь: | RELEASE LEVER REAR |
| Парткод: | 50GA 5474 0 |
| Деталь: | RELEASE LEVER REAR |
| Парткод: | 42GA 5474 0 |
| Деталь: | TERMINAL PLATE |
| Парткод: | 26NA 5428 0 |
| Деталь: | Cover Part |
| Парткод: | 50GA 5494 0 |
| Деталь: | TERMINAL FIXING SCREW 2 |
| Парткод: | 40LA 5443 0 |
| Деталь: | WIRING GUIDE PART B |
| Парткод: | 50GA 5405 0 |
| Деталь: | TERMINAL PEDESTAL B |
| Парткод: | 50GA 5378 0 |
| Деталь: | WIRING GUIDE PART A |
| Парткод: | 26NA 5321 1 |
| Деталь: | FIXING ENTRANCE PLATE |
| Парткод: | 50GA 5365 1E |
| Деталь: | FIXING ENTRANCE PLATE 2 ASSY |
| Парткод: | 50GA -548 0 |
| Деталь: | FIXING ENTRANCE PLATE 2 ASSY |
| Парткод: | 42GA -548 0 |
| Деталь: | FIXING INSULATING SHEET C |
| Парткод: | 50GA 5336 0 |
| Деталь: | FIXING PRESSING STOPPER |
| Парткод: | 50GA 5442 0 |
| Деталь: | CLEANER SUPPORT PART /2 |
| Парткод: | 50GA 5450 0 |
| Деталь: | CLEANER SUPPORT PART /2 |
| Парткод: | 42GA 5450 0 |
| Деталь: | POWER SOURCE COOLING DUCT/2 |
| Парткод: | 50GA 7338 1 |
| Деталь: | MAIN BODY FAN MOTOR |
| Парткод: | 27LA 8051 1 |
| Деталь: | POWER SOURCE COOLING DUCT/1 |
| Парткод: | 50GA 7337 1 |
| Деталь: | DUST PROOF FILTER |
| Парткод: | 50GA 7391 0 |
| Деталь: | DUST PROOFSEAL 5 |
| Парткод: | 26NA 7373 2 |
| Деталь: | POWER CORD |
| Парткод: | 4040 0780 01 |
| Деталь: | POWER CORD |
| Парткод: | 9381 4101 31 |
| Деталь: | POWER CORD |
| Парткод: | 9381 4300 41 |
| Деталь: | CIRCUIT BREAKER |
| Парткод: | 26NA 8846 1 |
| Деталь: | BLACKER |
| Парткод: | 6852 8604 0 |
| Деталь: | FAN MOUNTING BOARD /REAR |
| Парткод: | 50GA 7346 0E |
| Деталь: | SYSTEM COOLING FAN |
| Парткод: | 50GA 8052 0 |
| Деталь: | OZONE FILTER |
| Парткод: | 50GA 1031 0 |
| Деталь: | POWER SOCKET ASSY |
| Парткод: | 26NA R701 00 |
| Деталь: | Terminal Cap |
| Парткод: | 9384 2400 21 |
| Деталь: | CORD MOUNTING PLATE |
| Парткод: | 50GA 7344 0 |
| Деталь: | DUCT MOUNTING PLATE |
| Парткод: | 50GA 7355 0 |
| Деталь: | Dustproof Seal |
| Парткод: | 27LA 7391 0 |
| Деталь: | DC BRUSHLESS MOTOR/30 |
| Парткод: | 27LA 8003 2E |
| Деталь: | GEAR /A 30/100T |
| Парткод: | 50GA 1550 0 |
| Деталь: | PLYSLIDER 6 |
| Парткод: | 1900 4141 0 |
| Деталь: | GEAR /C 35/102T |
| Парткод: | 50GA 1552 0 |
| Деталь: | Belt 296L |
| Парткод: | 50GA 1541 0 |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 1728 0 |
| Деталь: | TENSION SPRING |
| Парткод: | 50GA 1545 0 |
| Деталь: | TENSION PLATE CAULKING |
| Парткод: | 26NA R710 00 |
| Деталь: | IDLER PULLEY 18T |
| Парткод: | 26NA 5037 0 |
| Деталь: | Conveyance Gear /A 27/50T |
| Парткод: | 50GA 1856 0 |
| Деталь: | Conveyance Gear/B 27/41T |
| Парткод: | 50GA 1857 0 |
| Деталь: | CONVEYANCE GEAR /C |
| Парткод: | 50GA 1858 0E |
| Деталь: | DEVELOPING DRIVE PULLEY LOWER 45T |
| Парткод: | 50GA 1565 0 |
| Деталь: | PAPER FEED SHAFT HOLDER |
| Парткод: | 4660 7602 0 |
| Деталь: | SHAFT ASSY |
| Парткод: | 50GA -183 0 |
| Деталь: | Gear/D 45T |
| Парткод: | 50GA 1553 0 |
| Деталь: | Gear/E 35T |
| Парткод: | 50GA 1554 0 |
| Деталь: | GEAR /I 31T |
| Парткод: | 50GA 1561 0E |
| Деталь: | DRIVE PULLEY UPPER 40T |
| Парткод: | 50GA 1566 0 |
| Деталь: | BALL BEARING |
| Парткод: | 26NA 5359 0 |
| Деталь: | RU DRIVE ASSY |
| Парткод: | 50GA -157 0 |
| Деталь: | DRIVE PANEL /F |
| Парткод: | 50GA 1506 0 |
| Деталь: | Idling Shaft /B |
| Парткод: | 50GA 1522 0E |
| Деталь: | DRUM ROTATION PLATE ASSY |
| Парткод: | 50GA -189 0 |
| Деталь: | DRIVE PANEL /I |
| Парткод: | 50GA 1547 0 |
Коды ошибок
C-0201
C-0202
C-0203
C-0204
C-0205
C-0206
C-0207
C-0301
C-1001
C-1002
C-1003
C-1101
C-1102
C-1103
C-1104
C-1105
C-1106
C-1107
C-1108
C-1109
C-1110
C-1111
C-1112
C-1113
C-1114
C-1115
C-1116
C-1117
C-1118
C-1119
C-1120
C-1121
C-2001
C-2201
C-2202
C-2301
C-2302
C-2303
C-2401
C-2402
C-2403
C-2701
C-2702
C-2703
C-2801
C-2802
C-2803
C-2804
C-3201
C-3301
C-3302
C-3501
C-3502
C-3801
C-3802
C-3803
C-3804
C-3805
C-3806
C-3807
C-3808
C-3901
C-3902
C-3903
C-3904
C-4001
C-4101
C-4401
C-4701
C-5001
C-5002
C-5003
C-5301
C-5302
C-5303
C-5401
C-5402
C-6001
C-6002
C-6003
C-6101
C-6201
C-6701
C-6702
C-8001
C-8301
Описание
| Error code: | C-0201 |
| Description: | Tray /1 up abnormality 1. When the upper limit sensor /1 (PS6) is OFF, PS6 does not turn ON within 20seconds after the tray lift-up motor /1 (M25) turns ON for lifting operation. At this time, an error detection signal (24V cut off) is detected. |
| Causes: | Upper limit sensor /1 (PS6) Tray lift-up motor /1 (M25) Printer control board (PRCB) DC power supply /2 (DCPS /2) |
| Remedy: | 1 Check the paper loaded condition and the rear end restriction plate condition of the tray 1, and repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 5-F 4 Check I/O and the operation of the sensor, and repair it if any abnormality. 3-G 5 Replace PS6. - 6 Replace M25. - 7 Replace PRCB. - 8 Replace DCPS /2. |
| Error code: | C-0202 |
| Description: | Drive - The upper limit sensor /2 (PS13) does not turn ON within a specified period of time after the paper lift motor /2 (M8) turns ON. |
| Causes: | Paper lift motor /2 (M8) Upper limit sensor /2 (PS13) Printer control board (PRCB) |
| Error code: | C-0203 |
| Description: | Tray /1 up abnormality 2. When the upper limit sensor /1 (PS6) is OFF, PS6 does not turn ON within 20seconds after the tray lift-up motor /1 (M25) turns ON for lifting operation. At this time, an error detection signal is not detected. |
| Causes: | Upper limit sensor /1 (PS6) Tray lift-up motor /1 (M25) Printer control board (PRCB) DC power supply /2 (DCPS /2) |
| Remedy: | 1 Check the paper loaded condition and the rear end restriction plate condition of the tray 1, and repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 5-F 4 Check I/O and the operation of the sensor, and repair it if any abnormality. 3-G 5 Replace PS6. - 6 Replace M25. - 7 Replace PRCB. - 8 Replace DCPS /2. |
| Error code: | C-0204 |
| Description: | The locking of the tray lift-up motor /1 (M25) is detected. An error detection signal of M25 is detected while M25 is ON. |
| Causes: | Tray lift-up motor /1 (M25) Printer control board (PRCB) |
| Remedy: | 1 Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 5-F 3 Replace M25. - 4 Replace PRCB. |
| Error code: | C-0205 |
| Description: | Tray /2 up abnormality 1. When the upper limit sensor /2 (PS10) is OFF, PS10 does not turn ON within 20seconds after the tray lift-up motor /2 (M34) turns ON for lifting operation. At this time, an error detection signal (24V cut off) is detected. |
| Causes: | Upper limit sensor /2 (PS10) Tray lift-up motor /2 (M34) Printer control board (PRCB) DC power supply /2 (DCPS /2) |
| Remedy: | 1 Check the paper loaded condition and the rear end restriction plate condition of the tray 2, and repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 8-F 4 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. 6-G 5 Replace PS10. - 6 Replace M34. - 7 Replace PRCB. - 8 Replace DCPS /2. |
| Error code: | C-0206 |
| Description: | Drive - Paper lift motor (M5) abnormality. Shift motor (M4) abnormality. Shift gate motor (M3) abnormality. |
| Causes: | Paper lift motor (M5) Shift motor (M4) Shift gate motor (M3) PC control board (PCCB) |
| Error code: | C-0207 |
| Description: | Tray /2 up abnormality 2. When the upper limit sensor /2 (PS10) is OFF, PS10 does not turn ON within 20seconds after the tray lift-up motor /2 (M34) turns ON for lifting operation. At this time, an error detection signal is not detected. |
| Causes: | Upper limit sensor /2 (PS10) Tray lift-up motor /2 (M34) Printer control board (PRCB) DC power supply /2 (DCPS /2) |
| Remedy: | 1 Check the paper loaded condition and the rear end restriction plate condition of the tray 2, and repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 8-F 4 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. 6-G 5 Replace PS10. - 6 Replace M34. - 7 Replace PRCB. - 8 Replace DCPS /2. |
| Error code: | C-0301 |
| Description: | The rotation of the conveyance suction fan (FM2) is checked, and the 24V power source is also checked. An abnormal FM2 EM signal condition occurs a specified period of time after FM2 is turned ON. This abnormal condition recurs even a specified period of time after FM12 is turned OFF and then turned ON, and an error detection signal (24V cut off) is detected. |
| Causes: | Confirmation of the wiring harness and the connector Conveyance suction fan (FM2) AC drive board (ACDB) DC power supply /2 (DCPS2) |
| Remedy: | 1 Check the connector connection and the wiring between ACDB and DCPS /2, and repair it if any abnormality. - 2 Replace DCPS /2. - 3 Replace ACDB. |
| Error code: | C-1001 |
| Description: | Communication error. |
| Causes: | Confirmation of the wiring harness and the connector FS control board (FSCB) Printer control board (PRCB: main body) |
| Remedy: | 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the all the power plugs. Restart the main body after 10 seconds. - 2 Check the connector connection and the wiring between the main body and each option, and repair it if any abnormality. - 3 Check the connector connection of the control board and the drive board in each option, and repair it if any abnormality. - 4 Rewrite the firmware of the option. - 5 Replace the control board of the option corresponds to the malfunction code. |
| Error code: | C-1002 |
| Description: | Start-up response error. |
| Causes: | Confirmation of the wiring harness and the connector FS control board (FSCB) Printer control board (PRCB: main body) |
| Error code: | C-1003 |
| Description: | Alignment plate drive abnormality. The alignment home sensors /Rr (PS8) and /Fr (PS31) do not turn ON within a specified period of time after the home position search operation of the alignment motors /Rr (M5) and /Fr (M22) starts. |
| Causes: | Alignment home sensor /Rr (PS8: FS-521) Alignment home sensor /Fr (PS31: FS-521) Alignment motor /Rr (M5: FS-521) Alignment motor /Fr (M22: FS-521) FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521) |
| Remedy: | 1 Check the alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 4-G 4 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 3-G, 4-G 5 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 6 Replace PS8 or PS31. - 7 Replace M5. - 8 Replace M22. - 9 Replace FNSDB. - 10 Replace FNSCB. |
| Error code: | C-1101 |
| Description: | The shift unit does not get to the shift position or the HP within a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the shift unit drive parts Shift roller home sensor (PS18) Shift roller motor (M2) FS control board (FSCB) |
| Error code: | C-1102 |
| Description: | After start-up of the main tray up/ down motor (M3) operation, the main tray upper limit sensor (PS2) or the stapler paper exit upper limit sensor (PS7) does not turn ON within a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the main tray drive parts Main tray upper limit sensor (PS2) Stapler paper exit upper limit sensor (PS7) Main tray up/down motor (M3) FS control board (FSCB) |
| Remedy: | 1 Check the tray up/down section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the sensor operation, LED emission and light-receiving path, and repair/ replace it if any abnormality. FS-521: 2-B, 4-B 5 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 1-B 6 Replace PS3. - 7 Replace LED1 and PS16. - 8 Replace M3. - 9 Replace FNSDB. - 10 Replace FNSCB. |
| Error code: | C-1103 |
| Description: | After start-up of the alignment motor /Up (M5) operation, the alignment home sensor /Up (PS8) does not turn OFF within a specified period of time. Or, it does not turn ON after being turned OFF. |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the alignment plate drive parts Alignment plate home sensor /Up (PS8) Alignment motor /Up (M5) Relay board (RB) FS control board (FSCB) |
| Remedy: | 1. Check the alignment section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between FNSCB and motor/sensor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 5-F) 4. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 10-B) 5. Replace PS12. 6. Replace M9. 7. Replace FNSCB. |
| Error code: | C-1104 |
| Description: | Paper exit roller drive abnormality. The main tray paper exit motor (M7) operates for more than the allowed time at a speed out of the specified one. 35-1 |
| Causes: | Main tray exit motor (M7: FS-521) FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521) |
| Remedy: | 1 Check the connector connection and the wiring between FNSDB and the motor, and repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 2-B 4 Replace M7. - 5 Replace FNSDB. - 6 Replace FNSCB. |
| Error code: | C-1105 |
| Description: | After start-up of the paper exit opening motor (M8) operation, the open/close operation is not completed within a specified period of time. (The paper exit opening home sensor (PS12) does not turn ON or OFF. ) |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the exit opening drive parts Paper exit opening home sensor (PS12) Paper exit opening motor (M8) FS control board (FSCB) |
| Remedy: | 1 Check the paper exit opening section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 2-C 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 3-B 6 Replace PS12. - 7 Replace M8. - 8 Replace FNSDB. - 9 Replace FNSCB. |
| Error code: | C-1106 |
| Description: | After start-up of the stapler movement motor (M11) operation, the stapler movement home sensor (PS11) does not turn OFF. Or, it does not turn ON after being turned OFF. |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the stapler movement parts Stapler movement home sensor (PS11) Stapler movement motor (M11) Relay board (RB) FS control board (FSCB) |
| Remedy: | 1 Check the stapler movement section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 5-G 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 2-G 6 Replace PS11. - 7 Replace M11. - 8 Replace FNSDB. - 9 Replace FNSCB. - |
| Error code: | C-1107 |
| Description: | Stapler rotation motor (M6) abnormality. (FS-611 only) |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the stapler rotation parts Stapler rotation motor (M6) Relay board (RB) FS control board (FSCB) |
| Remedy: | 1 Check the stapler rotation section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 5-G 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 2-G 6 Replace PS14. - 7 Replace M4. - 8 Replace FNSDB. - 9 Replace FNSCB. |
| Error code: | C-1108 |
| Description: | Stapler /Rr rotation abnormality. (FS-611 only) |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the stapler / Rr rotation parts Stapler rotation home sensor (PS13) Relay board (RB) FS control board (FSCB) |
| Remedy: | 1 Check the stapler rotation section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 5-G 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 2-G 6 Replace PS14. - 7 Replace M4. - 8 Replace FNSDB. - 9 Replace FNSCB. |
| Error code: | C-1109 |
| Description: | After start-up of the paper exit belt motor (M400) operation, the paper exit belt home sensor (PS9) does not turn ON within a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the driving parts of the conveyance belt Paper exit belt motor (M400) FS control board (FSCB) |
| Remedy: | 1 Check the connector connection and the wiring between FNSDB and the stapler, and repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 3 Replacing the stapler assy - 4 Replace FNSDB. - 5 Replace FNSCB. |
| Error code: | C-1110 |
| Description: | Stapler assy/Rr abnormality. After the stapler motor /Rr (M30) starts operations, it does not complete operations within a specified period of time, and the stapler home sensor /Rr (PS40) does not turn ON. 35-0 |
| Causes: | Stapler assy FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521) |
| Remedy: | 1 Check the connector connection and the wiring between FNSDB and the stapler, and repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 3 Replacing the stapler assy - 4 Replace FNSDB. - 5 Replace FNSCB. |
| Error code: | C-1111 |
| Description: | The stapler motor home sensor /Fr (PS31) does not turn ON within a specified period of time after the stapler motor /Fr (M14) starts operations. (FS-528) Within a specified period of time after the start-up of the clincher motor /Fr (M15) or stapler motor /Fr (M14) operation, the clincher home sensor / Fr (PS33) or the stapler home sensor /Fr (PS31) does not turn ON. (FS-611) |
| Causes: | Confirmation of the wiring harness and the connector Replacement of the stapler / Fr Relay board (RB) FS control board (FSCB) |
| Error code: | C-1112 |
| Description: | The stapler motor home sensor / Rr (PS30) does not turn ON within a specified period of time after the stapler motor /Rr (M9) starts operations. (FS-528) Within a specified period of time after the start-up of the clincher motor /Rr (M10) or stapler motor / Rr (M9) operation, the clincher home sensor /Rr (PS32) or the stapler home sensor /Rr (PS30) does not turn ON. (FS-611) |
| Causes: | Confirmation of the wiring harness and the connector Replacement of the stapler / Rr Relay board (RB) FS control board (FSCB) |
| Error code: | C-1113 |
| Description: | The clincher home sensor /Fr (PS33) does not turn ON within a specified period of time after the clincher motor /Fr (M15) starts operation. (FS-611) |
| Causes: | Confirmation of the wiring harness and the connector Replacement of the stapler / Fr Relay board (RB) FS control board (FSCB) |
| Remedy: | 1 Check the stapler rotation section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 4-G 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 2-G 6 Replace PS14. - 7 Replace M26. - 8 Replace FNSDB. - 9 Replace FNSCB. |
| Error code: | C-1114 |
| Description: | The clincher home sensor /Rr (PS32) does not turn ON within a specified period of time after the clincher motor /Rr (M10) starts operation. (FS-611) |
| Causes: | Confirmation of the wiring harness and the connector Replacement of the stapler / Rr Relay board (RB) FS control board (FSCB) |
| Remedy: | 1. Check the stacker section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between FNSCB and motor/sensor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 2-F) 4. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 12-B) 5. Replace PS38. 6. Replace M28. 7. Replace FNSCB. |
| Error code: | C-1115 |
| Description: | Within a specified period of time after the start-up of the FS conveyance motor (M1) operation, the motor does not get to the predetermined speed. |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the conveyance drive parts FS conveyance motor (M1) FS control board (FSCB) |
| Remedy: | 1. Check the half-fold/fold&staple/tri-fold section, and repair it if any abnormality 2. Check the connector connection and the wiring between FNSCB and SDCB, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDCB and motor/sensor, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-510: 8-B) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-510: 9-B) 6. Replace PS110. 7. Replace M107. 8. Replace SDCB. 9. Replace FNSCB. |
| Error code: | C-1116 |
| Description: | FS-510: Exit roller release motor (M6) drive abnormality. - When the shutter is closed, the shutter home sensor (PS16) does not turn ON within a specified period of time after M6 turns ON. - When the shutter is open, PS16 does not turn OFF within a specified period of time after M6 turns ON. |
| Causes: | Exit roller release motor (M6) Shutter home sensor (PS16) FS control board (FSCB) |
| Error code: | C-1117 |
| Description: | FS-510: Alignment motor /Fr (M5) drive abnormality. - While in the home position search, the alignment home sensor /Fr (PS7) does not turn ON within a specified period of time after M5 turns ON. - While in the home position search, PS7 does not turn OFF within a specified period of time after M5 turns ON. |
| Causes: | Alignment motor /Fr (M5) Alignment home sensor /Fr (PS7) FS control board (FSCB) |
| Error code: | C-1118 |
| Description: | FS-510: Exit paddle solenoid (SD2) drive abnormality. - While in the paddle evacuation, the exit paddle home sensor (PS11) does not turn ON within a specified period of time after SD2 turns ON. - While in the paper hold-down operation, PS11 does not turn OFF within a specified period of time after SD turns ON. |
| Causes: | Exit paddle solenoid (SD2) Exit paddle home sensor (PS11) FS control board (FSCB) |
| Error code: | C-1119 |
| Description: | FS-511: Punch motor (M11) drive abnormality. - The punch encoder sensor (PS15) does not turn OFF within a specified period of time after M11 turns ON. |
| Causes: | Punch motor (M11) FS control board (FSCB) |
| Error code: | C-1120 |
| Description: | FS-511: Hole punch selector motor (M14) drive abnormality (inch system only) - When starting the punch 2- hole position switch drive, the hole punch position switch (SW4) is not turned ON in the specified period of time after the M14 is turned ON. - When starting the punch 3- hole position switch drive, the SW4 is not turned OFF in the specified period of time after the M14 is turned ON. |
| Causes: | FS control board (FSCB) Hole punch selector motor (M14) |
| Error code: | C-1121 |
| Description: | After the saddle stitching stopper motor (M18) starts the home position detection operation, the saddle stitching stopper home sensor (PS23) does not turn ON within a specified period of time. (FS-611 only) |
| Causes: | Confirmation of the wiring harness and the connector Confirmation of the saddle stitcher stopper drive parts Saddle stitching stopper home sensor (PS23) Saddle stitching stopper motor (M18) Relay board (RB) FS control board (FSCB) |
| Error code: | C-2001 |
| Description: | Image process communication abnormality - Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB) While in the stand-by, a process Ready signal cannot be detected for a specified period of time. |
| Causes: | Overall control board (OACB) Printer control board (PRCB) |
| Error code: | C-2201 |
| Description: | The speed error signal of the toner bottle motor (M15) is checked. An error detection signal is detected twice in succession a specified period of time after M15 turns ON (the first signal is ignored). |
| Causes: | Confirmation of the wiring harness and the connector Toner bottle motor (M15) Printer control board (PRCB) |
| Remedy: | 1 Check the toner bottle installation section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 3-M 4 Replace M6. - 5 Replace PRCB. |
| Error code: | C-2202 |
| Description: | The speed error signal of the developing motor (M3) is checked. Since an error detection signal is detected a second after M3 turns ON, turn OFF M3 for a specified period of time. Then, an error detection signal is detected again a specified period of time after it is turned ON again. |
| Causes: | Confirmation of the wiring harness and the connector Developing motor (M3) Printer control board (PRCB) |
| Remedy: | 1 Check the developing sleeve, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 18-K 4 Replace M3. - 5 Replace PRCB. |
| Error code: | C-2301 |
| Description: | Developing suction fan /1 (FM9) rotation abnormality + 24V power abnormality. The FM9EM error detection signal is detected twice in succession within a specified period of time after FM9 was turned ON. At this time, an error detection signal (24V cut off) is detected. |
| Causes: | DC power supply /2 (DCPS /2) Printer control board (PRCB) |
| Remedy: | 1 Check the connector connection and the wiring between PRCB and DCPS /2, and repair it if any abnormality. - 2 Replace DCPS /2. - 3 Replace PRCB. |
| Error code: | C-2302 |
| Description: | Transfer suction fan /1 (FM9) power abnormality. The FM9EM error detection signal is detected twice in succession within a specified period of time after FM9 was turned ON. In addition, 24V is normal, and an error detection signal (blowout of ICP) is detected. |
| Causes: | Developing suction fan /1 (FM9) Printer control board (PRCB) |
| Remedy: | 1 Check the connector connection and the wiring between PRCB and the fun, and repair it if any abnormality. - 2 Rotate the fan by I/O or hand, and repair/replace it if any abnormality. 5-L 3 Replace FM9 and PRCB at a time. |
| Error code: | C-2303 |
| Description: | Developing suction fan /1 (FM9) rotation abnormality. The FM9EM error detection signal is detected twice in succession within a specified period of time after FM9 was turned ON. However, error detection signals (24V cut off/blowout of ICP) are not detected. |
| Causes: | Developing suction fan /1 (FM9) Printer control board (PRCB) |
| Remedy: | 1 Check the connector connection and the wiring between PRCB and the fun, and repair it if any abnormality. - 2 Rotate the fan by I/O or hand, and repair/replace it if any abnormality. 5-L 3 Replace FM9. - 4 Replace PRCB. |
| Error code: | C-2401 |
| Description: | The temperature of the drum temperature sensor (TH5) detected a specified period of time after the main power switch (SW1) is turned ON is -3°C or lower, and also, the drum temperature after a specified period of time is -3°C or lower. |
| Causes: | Confirmation of the wiring harness and the connector Drum temperature sensor (TH5) Printer control board (PRCB) |
| Remedy: | 1 Check the EL section, and clean/repair it if any abnormality. 16-F 2 Check the connector connection and the wiring between PRCB and EL, and repair it if any abnormality. - 3 Replace EL. - 4 Replace PRCB. |
| Error code: | C-2402 |
| Description: | When the main power switch (SW1) turns ON with the fusing temperature below 50°C, the detected temperature of the drum temperature sensor (TH5) is more than 52°C, and when the detected temperature is above 52°C after a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Drum temperature sensor (TH5) Printer control board (PRCB) |
| Remedy: | 1 Check the connector connection and the wiring between PRCB and TH5, and repair it if any abnormality. - 2 Check the TH5, and repair/replace it if any abnormality. 17-F 3 Replace TH5. - 4 Replace PRCB. |
| Error code: | C-2403 |
| Description: | The erase lamp (EL1) is unconnected. |
| Causes: | Confirmation of the wiring harness and the connector Erase lamp (EL1) Printer control board (PRCB) |
| Remedy: | 1 Check the connector connection and the wiring between PRCB and TH5, and repair it if any abnormality. - 2 Check the TH5, and repair/replace it if any abnormality. 17-F 3 Replace TH5. - 4 Replace PRCB. |
| Error code: | C-2701 |
| Description: | A charge leak is detected. After a charge error detection signal is detected while in the charge ON, up to 5 charge ON/OFF operations occur in succession. |
| Causes: | Confirmation of the charger power feeding contact Confirmation of the wiring harness and the connector High voltage unit /1 (HV1) Printer control board (PRCB) |
| Remedy: | 1 Clean the power feed section for the charger. - 2 Check the charger (charging wire and the grid), and clean/repair it if there is any dirt or abnormality. - 3 Check the connector connection and the wiring between HV1 and the charger, and repair it if any abnormality. 18-G 4 Replace HV1. |
| Error code: | C-2702 |
| Description: | A transfer leak is detected. After a transfer error detection signal is detected while in the transfer ON, up to 5 transfer ON/OFF operations occur in succession. |
| Causes: | Confirmation of the transfer/ separation charger power feeding contact Confirmation of the wiring harness and the connector High voltage unit /2 (HV2) Printer control board (PRCB) ADU drive board (ADUDB) |
| Remedy: | 1 Check the transfer roller section, and clean/repair it if there is sensor dirt or any abnormality. - 2 Clean the power feed section for the transfer roller. - 3 Check the transfer roller pressure section, and clean/repair it if there is sensor dirt or any abnormality. - 4 Check the connector connection and the wiring between HV2 and the power feed section, and repair it if any abnormality. 13-O 5 Replace HV2. |
| Error code: | C-2703 |
| Description: | A separation leak is detected. After a separation error detection signal is detected while in the separation ON, up to 5 separation ON/OFF operations occur in succession. |
| Causes: | Confirmation of the transfer/ separation charger power feeding contact Confirmation of the wiring harness and the connector High voltage unit /2 (HV2) Printer control board (PRCB) ADU drive board (ADUDB) |
| Error code: | C-2801 |
| Description: | The dirt correction of the sensor is not completed. While in the maximum density correction, the dirt correction of the IDC sensor is not sufficient. When this condition is detected 10 times in succession, the error code is displayed. |
| Causes: | Cleaning of the IDC sensor Confirmation of the wiring harness and the connector IDC sensor board (IDCB) Printer control board (PRCB) |
| Remedy: | 1 Check TCB, and clean it with alcohol if there is IDC sensor dirt or any abnormality. Be sure to clean TCB with alcohol, otherwise replacement of TCB is required. 17-F 2 Check the developing section, and clean/repair it if there is sensor dirt or any abnormality. - 3 Check the connector connection and the wiring between PRCB and TCB, and repair it if any abnormality. - 4 Replace TCB. - 5 Replace PRCB. |
| Error code: | C-2802 |
| Description: | The maximum density correction (Dmax) is not completed. While in Dmax, the number of rotations of the developing sleeve gets to the maximum. |
| Causes: | Developing motor (M3) Toner control board (TCB) Printer control board (PRCB) |
| Remedy: | 1 Check TCB, and clean it with alcohol if there is IDC sensor dirt or any abnormality. Be sure to clean TCB with alcohol, otherwise replacement of TCB is required. 17-F 2 Check the connector connection and the wiring between PRCB and TCB, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and clean/repair/ replace it if any abnormality. 18-K 4 Replace TCB. - 5 Replace M3. - 6 Replace PRCB. |
| Error code: | C-2803 |
| Description: | The IDC sensor (TCB) output abnormality. While in the maximum density correction, a patch for control is not output. (No output is made from the gamma sensor.) |
| Causes: | Toner control board (TCB) LPH board (LPHB) Overall control board (OACB) Image processing board (IPB) |
| Remedy: | 1 Check TCB, and clean it with alcohol if there is IDC sensor dirt or any abnormality. Be sure to clean TCB with alcohol, otherwise replacement of TCB is required. 17-F 2 Check the LPH section, and clean/replace it if there is LED dirt or any abnormality. 18-C 3 Check the connector connection and the wiring between OACB and IPB, and repair it if any abnormality. - 4 Check the connector connection and the wiring between LPHB and IPB, and repair it if any abnormality. - 5 Replace LPHB. - 6 Replace IPB. - 7 Replace OACB. |
| Error code: | C-2804 |
| Description: | The dirt correction of the IDC sensor is not completed |
| Causes: | Toner control board (TCB) Printer control board (PRCB) |
| Remedy: | 1 Check TCB, and clean it with alcohol if there is IDC sensor dirt or any abnormality. Be sure to clean TCB with alcohol, otherwise replacement of TCB is required. 17-F 2 Check the developing section, and clean/repair it if there is any dirt or abnormality. - 3 Check the connector connection and the wiring between PRCB and TCB, and repair it if any abnormality. - 4 Replace TCB. - 5 Replace PRCB. |
| Error code: | C-3201 |
| Description: | Drum motor (M24) power abnormality + 24V power abnormality. When M24 turns ON, error detection signals (blowout of ICP and the 24V cut off) are detected. |
| Causes: | DC power supply /2 (DCPS /2) AC drive board (ACDB) |
| Remedy: | 1 Check the connector connection and the wiring between ACDB and DCPS /2, and repair it if any abnormality. - 2 Replace DCPS /2. - 3 Replace ACDB. |
| Error code: | C-3301 |
| Description: | The rotation of the fusing fan /1 (FM1) is checked, and the 24V power source is also checked. An abnormal condition occurs with the FM1 EM signal a specified period of time after FM1 is turned ON. This abnormal condition recurs even a specified period of time after FM1 is turned OFF and then turned ON, and an error detection signal (24V cut off) is detected. |
| Causes: | Confirmation of the wiring harness and the connector Fusing fan /1 (FM1) ADU drive board (ADUDB) DC power supply /2 (DCPS2) |
| Error code: | C-3302 |
| Description: | Rotation of the fusing fan /1 (FM1) is checked. An abnormal condition occurs with the FM1 EM signal a specified period of time after FM1 is turned ON. This abnormal condition recurs even a specified period of time after FM1 is turned OFF and then turned ON, and an error detection signal (24V cut off/ blowout of ICP) is not detected. |
| Causes: | Confirmation of the wiring harness and the connector Fusing fan /1 (FM1) ADU drive board (ADUDB) DC power supply /2 (DCPS2) |
| Error code: | C-3501 |
| Description: | Fusing roller /Up high temperature detection (software). TH1 detects a temperature of 235°C or above 5 times in a specified period of time. Or, the fusing temperature sensor /2 (TH2) detects a temperature of 240°C or above. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 1 (TH1) Fusing heater lamp /1 (L1) Fusing heater lamp /2 (L2) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing rollers /Up (L1 and L2), and clean/repair them if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L1/L2, and repair it if any abnormality. - 4 Check TH to see the installed position or distance to the fusing roller /Up, and adjust/ replace it if any abnormality. 14-F 5 Replace TH1. - 6 Replace L1 and L2. - 7 Replace PRCB. - 8 Replace ACDB. - *After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. If DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-3502 |
| Description: | Fusing heating roller high temperature abnormality (software). TH3 detects a temperature of 230°C or above 5 times in a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 3 (TH3) Fusing heater lamp /3 (L3) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing heating roller /Up (L3), and repair it if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L3, and repair it if any abnormality. - 4 Check TH3 installed condition or the distance between TH3 and the fusing roller /Up, and adjust/replace it if any abnormality. 13-F 5 Replace TH3. - 6 Replace L3. - 7 Replace PRCB. - 8 Replace ACDB. - * After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-3801 |
| Description: | Fusing roller /Up low temperature abnormality (software). TH1 does not get to 75°C when a specified period of time has elapsed after the main switch (SW1) is turned ON for the fusing ON control. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 1 (TH1) Fusing heater lamp /1 (L1) Fusing heater lamp /2 (L2) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing rollers /Up (L1 and L2), and clean/repair them if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L1/L2, and repair it if any abnormality. - 4 Check TH to see the installed position or distance to the fusing roller /Up, and adjust/ replace it if any abnormality. 14-F 5 Replace TH1. - 6 Replace L1 and L2. - 7 Replace PRCB. - 8 Replace ACDB. - *After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. If DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-3802 |
| Description: | Fusing heating roller low temperature abnormality (software). TH3 does not get to 50°C when a specified period of time has elapsed after the main switch (SW1) is turned ON for the fusing ON control. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 3 (TH3) Fusing heater lamp /3 (L3) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing heating roller /Up (L3), and repair it if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L3, and repair it if any abnormality. - 4 Check TH3 installed condition or the distance between TH3 and the fusing roller /Up, and adjust/replace it if any abnormality. 13-F 5 Replace TH3. - 6 Replace L3. - 7 Replace PRCB. - 8 Replace ACDB. - * After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-3803 |
| Description: | Fusing main sensor low temperature abnormality. - The detection temperature of the thermistor /1 (TH1) does not get to the prescribed temperature within a specified period of time after it starts the warm-up. |
| Causes: | Thermistor /1 (TH1) Printer control board (PRCB) |
| Error code: | C-3804 |
| Description: | Fusing sub sensor low temperature abnormality. - While in the idle, the fusing heater lamp /2 (L3) turns on for more than 12 seconds in succession. |
| Causes: | Thermistor /2 (TH2) Printer control board (PRCB) |
| Error code: | C-3805 |
| Description: | Fusing sub sensor low temperature abnormality. - While in other than the warm-up, the thermistor /2 (TH2) detects a temperature lower than 130 °C for more than 10 seconds. |
| Causes: | Thermistor /2 (TH2) Printer control board (PRCB) |
| Error code: | C-3806 |
| Description: | Fusing sub sensor low temperature abnormality. - The detection temperature of the thermistor /2 (TH2) does not get to the prescribed temperature within a specified period of time after it starts the warm-up. |
| Causes: | Thermistor /2 (TH2) Printer control board (PRCB) |
| Error code: | C-3807 |
| Description: | Fusing main sensor high temperature abnormality (sub CPU detection) - In the sub CPU, the thermistor /1 (TH1) detects a temperature higher than 236 °C for more than a specified period of time. |
| Causes: | Thermistor /1 (TH1) Printer control board (PRCB) |
| Error code: | C-3808 |
| Description: | Fusing sub sensor high temperature abnormality (sub CPU detection) - In the sub CPU, the thermistor /2 (TH2) detects a temperature higher than 236 °C for more than a specified period of time. |
| Causes: | Thermistor /2 (TH2) Printer control board (PRCB) |
| Error code: | C-3901 |
| Description: | Fusing roller /Up sensor abnormality (software). TH1 detects a temperature of 230°C or above 30 times in a row in a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 1 (TH1) Fusing heater lamp /1 (L1) Fusing heater lamp /2 (L2) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing rollers /Up (L1 and L2), and clean/repair them if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L1/L2, and repair it if any abnormality. - 4 Check TH to see the installed position or distance to the fusing roller /Up, and adjust/ replace it if any abnormality. 14-F 5 Replace TH1. - 6 Replace L1 and L2. - 7 Replace PRCB. - 8 Replace ACDB. - *After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. If DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-3902 |
| Description: | Fusing heating roller sensor abnormality (software). TH3 detects a temperature of 220°C or above 30 times in a row in a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 3 (TH3) Fusing heater lamp /3 (L3) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing heating roller /Up (L3), and repair it if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L3, and repair it if any abnormality. - 4 Check TH3 installed condition or the distance between TH3 and the fusing roller /Up, and adjust/replace it if any abnormality. 13-F 5 Replace TH3. - 6 Replace L3. - 7 Replace PRCB. - 8 Replace ACDB. - * After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-3903 |
| Description: | Fusing roller /Up sensor abnormality (hardware). The output voltage of the TH1 is detected as a low temperature abnormality (- 6°C or lower) in the comparator circuit. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 1 (TH1) Fusing heater lamp /1 (L1) Fusing heater lamp /2 (L2) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing rollers /Up (L1 and L2), and clean/repair them if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L1/L2, and repair it if any abnormality. - 4 Check TH to see the installed position or distance to the fusing roller /Up, and adjust/ replace it if any abnormality. 14-F 5 Replace TH1. - 6 Replace L1 and L2. - 7 Replace PRCB. - 8 Replace ACDB. - *After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. If DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-3904 |
| Description: | Fusing heating roller sensor abnormality (hardware). The output voltage of the TH3 is detected as a low temperature abnormality (-6°C or lower) in the comparator circuit. |
| Causes: | Confirmation of the wiring harness and the connector Fusing temperature sensor / 3 (TH3) Fusing heater lamp /3 (L3) Printer control board (PRCB) AC drive board (ACDB) |
| Remedy: | 1 Check the fusing heating roller /Up (L3), and repair it if any abnormality. 10-N 2 Check the connector connection and the wiring between PRCB and TH1, and repair it if any abnormality. - 3 Check the connector connection and the wiring between ACDB and L3, and repair it if any abnormality. - 4 Check TH3 installed condition or the distance between TH3 and the fusing roller /Up, and adjust/replace it if any abnormality. 13-F 5 Replace TH3. - 6 Replace L3. - 7 Replace PRCB. - 8 Replace ACDB. - * After replacing the defective parts, be sure to set the DIPSW 3-1 to 0. DIPSW3-1 is set to 0 before defective parts are fixed, it causes fire. |
| Error code: | C-4001 |
| Description: | Index board (INDEXB) contact abnormality. |
| Causes: | Index board (INDEXB) Overall control board (OACB) |
| Error code: | C-4101 |
| Description: | When the speed of the polygon motor (M17) is being switched, a speed lock signal is not detected within a specified period of time. |
| Causes: | Confirmation of the wiring harness and the connector Write unit (Polygon motor drive board (PMDB) Polygon motor (M17) ) DC power supply /2 (DCPS2) |
| Error code: | C-4401 |
| Description: | Laser drive board (LDB) abnormality. - When an overcurrent flows for laser output. |
| Causes: | Laser drive board (LDB) Overall control board (OACB) |
| Error code: | C-4701 |
| Description: | FIFO address abnormality for the printer. While in the image write, the expansion processing of image data that is read in is not correctly terminated. |
| Causes: | Confirmation of the wiring harness and the connector Overall control board (OACB) Gate array damaged |
| Remedy: | 1 Check the connector connection and the wiring on IPB, and repair it if any abnormality. - 2 Replace IPB. |
| Error code: | C-5001 |
| Description: | Main body control board communication abnormality 1 - Communication abnormality between the overall control board (OACB) and the scanner drive board (SDB). |
| Causes: | Overall control board (OACB) Scanner drive board (SDB) |
| Error code: | C-5002 |
| Description: | Main body control board communication abnormality 2 - Communication abnormality, incoming command abnormality, platen operation sequence abnormality to the sub CPU in the overall control board (OACB). |
| Causes: | Printer control board (PRCB) |
| Error code: | C-5003 |
| Description: | Sub CPU A/D conversion abnormality. - There is no response 2 times in succession to the A/D conversion request of the overall control board (OACB). |
| Causes: | Printer control board (PRCB) |
| Error code: | C-5301 |
| Description: | The rotation of the cooling fan /1 (FM26) and /2 (FM27) is checked, and the 24V power source is also checked. An abnormal condition occurs with the FM26 and FM27 EM signals a specified period of time after FM26 and FM27 are turned ON. This abnormal condition recurs even a specified period of time after FM26 and FM27 are turned OFF and then ON again, and an error detection signal (24V cut off) is detected. |
| Causes: | Confirmation of the wiring harness and the connector Cooling fan /1 (FM26) Cooling fan /2 (FM27) AC drive board (ACDB) Printer control board (PRCB) DC power supply /2 (DCPS2) |
| Error code: | C-5302 |
| Description: | The rotation of the cooling fan /1 (FM26) and /2 (FM27) is checked. An abnormal condition occurs with the FM26 and FM27 EM signals a specified period of time after FM26 and FM27 are turned ON. This abnormal condition recurs even a specified period of time after FM26 and FM27 are turned OFF and then ON again, and an error detection signal (24V cut off) is not detected. |
| Causes: | Confirmation of the wiring harness and the connector Cooling fan /1 (FM26) Cooling fan /2 (FM27) AC drive board (ACDB) Printer control board (PRCB) DC power supply /2 (DCPS2) |
| Error code: | C-5303 |
| Description: | Power supply cooling fan (FM1) conversion abnormality. - When FM1 is ON, an error signal is detected 5 times in succession within a specified period of time. |
| Causes: | Power supply cooling fan (FM1) Printer control board (PRCB) |
| Error code: | C-5401 |
| Description: | OS error - There occurs an OS error with the engine control section in the printer control board (PRCB). |
| Causes: | Printer control board (PRCB) |
| Error code: | C-5402 |
| Description: | System control communication abnormality - Time out for tuning off the power switch (SW2) |
| Causes: | Overall control board (OACB) Printer control board (PRCB) |
| Error code: | C-6001 |
| Description: | Image process communication abnormality - CCD board (CCDB) connection abnormality. |
| Causes: | CCD board (CCDB) Overall control board (OACB) |
| Error code: | C-6002 |
| Description: | Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB). While in the stand-by, a scanner Ready signal cannot be detected for a specified period of time. |
| Causes: | Overall control board (OACB) Printer control board (PRCB) |
| Error code: | C-6003 |
| Description: | Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB). Time out for the notice time of the platen original size. |
| Causes: | Overall control board (OACB) Printer control board (PRCB) |
| Error code: | C-6101 |
| Description: | The scanner home sensor (PS5) does not turn ON within a specified period of time after the home position search is started. |
| Causes: | Confirmation of the wiring harness and the connector Scanner motor (M13) Scanner home sensor (PS5) Scanner drive board (SDB) Printer control board (PRCB) DC power supply /2 (DCPS2) |
| Remedy: | Check the connector connection and the wiring between SDB and DCPS /1, and repair it if any abnormality. - 2 Replace DCPS /1. - 3 Replace SDB. |
| Error code: | C-6201 |
| Description: | Exposure lamp (L1) abnormality. - A specified period of time after L1 turns on, an L1 abnormality signal is detected in succession for a specified period of time. |
| Causes: | Exposure lamp (L1) L1 inverter (L1 INVVB) Printer control board (PRCB) |
| Error code: | C-6701 |
| Description: | When processing images, a filter coefficient cannot be created normally. |
| Causes: | Confirmation of the wiring harness and the connector Reinstalling firmware Overall control board (OACB) |
| Remedy: | 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Check the connector connection and the wiring on IPB, and repair it if any abnormality. - 3 Rewrite the firmware for image control. - 4 Replace IPB. |
| Error code: | C-6702 |
| Description: | FIFO address abnormality for the scanner. While in the image read, the compression of image data that is read in is not correctly terminated. |
| Causes: | Confirmation of the wiring harness and the connector Overall control board (OACB) (Gate array damaged) |
| Remedy: | 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Check the connector connection and the wiring on IPB, and repair it if any abnormality. - 3 Rewrite the firmware for image control. - 4 Replace IPB. |
| Error code: | C-8001 |
| Description: | Although the main body sends out data according to the data retransmission request made by the DF, a retransmission request signal is received again. |
| Causes: | Confirmation of the wiring harness and the connector DF control board (DFCB: DF) Overall control board (OACB: main body) |
| Remedy: | 1 Check the connector connection and the wiring between IDFCB and OACB, and repair it if any abnormality. - 2 Replace DFCB - 3 Replace OACB. |
| Error code: | C-8301 |
| Description: | Cooling fan (FM301) abnormality. |
| Causes: | Confirmation of the wiring harness and the connector Cooling fan (FM301) DF control board (DFCB) |
| Remedy: | 1 Check the connector connection and the wiring between DFCB and the fan, and repair it if any abnormality. - 2 Rotate the fan by I/O or hand, and repair/replace it if any abnormality. DF-615: 7-C, 8-G 3 Replace FM301 or FM302. - 4 Replace DFCB |
