Konica-Minolta bizhub 7818
Рейтинг
Модули
DEVELOPING SECTION
IR SECTION
ORIGINAL COVER
ELECTRICAL COMPONENTS
CASSETTE SECTION
CHARGE SECTION
PRINT HEAD SECTION
EXTERNAL PARTS
HOPPER SECTION
PAPER TRANSPORT SECTION
DRIVE SECTION
PAPER TAKE-UP SECTION
FRAME SECTION
FUSING & PAPER EXIT SECTION
MANUAL PAPER FEED SECTION
IR SECTION 2
Детали IR SECTION
| Деталь: | GEAR 16T |
| Парткод: | A0XX372200 |
| Деталь: | Gear 21T |
| Парткод: | A0XX372500 |
| Деталь: | GEAR 18T |
| Парткод: | A0XX372300 |
| Деталь: | GEAR 15/18T |
| Парткод: | A0XX372100 |
| Деталь: | Gear 15/22T |
| Парткод: | A0XX372400 |
| Деталь: | BUSHING |
| Парткод: | A0XX373600 |
| Деталь: | Magnetic sensor |
| Парткод: | A1XUM50300 |
| Деталь: | TENSION SPRING |
| Парткод: | A0XXPP1G00 |
| Деталь: | TIMING BELT |
| Парткод: | A0XXPP5R00 |
| Деталь: | PULLEY |
| Парткод: | A0XXPP2C01 |
| Деталь: | COLLAR |
| Парткод: | A0XXPP0M00 |
| Деталь: | GEAR |
| Парткод: | A0XXPP2900 |
| Деталь: | BRACKET ASSY |
| Парткод: | A0XXPP1E00 |
| Деталь: | MOTOR |
| Парткод: | A0XXPP5X00 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP2B00 |
| Деталь: | SEAL |
| Парткод: | A0XXPP5N00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0XXPP5U00 |
| Деталь: | CIS ASSY |
| Парткод: | A0XXPP9000 |
| Деталь: | SEAL |
| Парткод: | A0XXPP6U00 |
| Деталь: | FFC CIS |
| Парткод: | A0XXPP0F00 |
| Деталь: | Hinge Left |
| Парткод: | AOXXPP5QOO |
| Деталь: | SHAFT |
| Парткод: | AOXXPP4QOO |
| Деталь: | Hinge Right |
| Парткод: | AOXXPP4POO |
| Деталь: | ORIGINAL COVER |
| Парткод: | AOXXPP4N03 |
| Деталь: | PAD |
| Парткод: | AOXXPP5P02 |
| Деталь: | PW Board Assy CC/MC 16PPM |
| Парткод: | A0XXPP9S00 |
| Деталь: | PW Board Assy CC/MC 18PPM |
| Парткод: | A0XXPP9T00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0800 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP4X00 |
| Деталь: | PW Board Assy LV 200V |
| Парткод: | A0XXPP0J00 |
| Деталь: | PW Board Assy LV 100V |
| Парткод: | A0XXPP0K00 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP1800 |
| Деталь: | SPACER |
| Парткод: | V502010021 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0400 |
| Деталь: | HV Transfomer |
| Парткод: | A0XXPP0H00 |
| Деталь: | LABEL EARTH CAUTION |
| Парткод: | A0XXPP8500 |
| Деталь: | Cord Bush |
| Парткод: | A0XXPP6200 |
| Деталь: | Power Source Cord /220-240V |
| Парткод: | A0XXPP0100 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP1S00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0C00 |
| Деталь: | Power Supply Wiring |
| Парткод: | A0XXPP0D00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0300 |
| Деталь: | LABEL |
| Парткод: | 9J06730201 |
| Деталь: | MPC Assy |
| Парткод: | A0XXPP6J00 |
| Деталь: | WEIGHT |
| Парткод: | A0XXPP2200 |
| Деталь: | SHAFT |
| Парткод: | A0XXPP2101 |
| Деталь: | PAPER FEED ROLLER |
| Парткод: | A0XX560200 |
| Деталь: | FRONT COVER |
| Парткод: | A0XXPP3D00 |
| Деталь: | BUSHING |
| Парткод: | A0XXPP3A01 |
| Деталь: | HANDLE |
| Парткод: | A0XXPP3E00 |
| Деталь: | LEVER |
| Парткод: | 1164306101 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 1164306201 |
| Деталь: | RACK |
| Парткод: | A02F623200 |
| Деталь: | CASSETTE |
| Парткод: | A0XXPP3C00 |
| Деталь: | GEAR 20T |
| Парткод: | 1164304501 |
| Деталь: | LIFTING PLATE |
| Парткод: | A0XXPP3B01 |
| Деталь: | REGULATING PLATE |
| Парткод: | A02F621200 |
| Деталь: | Label Level |
| Парткод: | A02F944100 |
| Деталь: | FRICTION SHEET |
| Парткод: | A0XXPP7900 |
| Деталь: | PAWL |
| Парткод: | 1164300403 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A02F625400 |
| Деталь: | REGULATING PLATE |
| Парткод: | A02F621101 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4038560100 |
| Деталь: | LEVER |
| Парткод: | 4037321001 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0XXPP3F00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XXPP0R01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XXPP7A00 |
| Деталь: | Separator Assy |
| Парткод: | A0XXPP6E01 |
| Деталь: | SEAL |
| Парткод: | 910550712 |
| Деталь: | SCREW |
| Парткод: | 4163560702 |
| Деталь: | IU (Imaging unit) |
| Парткод: | A1XUR70000 |
| Деталь: | SHAFT |
| Парткод: | 4021016602 |
| Деталь: | TORSION SPRING |
| Парткод: | 4163407201 |
| Деталь: | HOLDER |
| Парткод: | 4163436104 |
| Деталь: | Separating Claw |
| Парткод: | A0XX361100 |
| Деталь: | SEAL |
| Парткод: | 4163560503 |
| Деталь: | GEAR 14T |
| Парткод: | 4021561601 |
| Деталь: | GEAR 14T |
| Парткод: | 4163563901 |
| Деталь: | GEAR 14/14T |
| Парткод: | 4021561501 |
| Деталь: | GEAR 14T |
| Парткод: | 4163560901 |
| Деталь: | BUSHING |
| Парткод: | 4163561101 |
| Деталь: | SEAL |
| Парткод: | 4163560302 |
| Деталь: | Cleaning Part |
| Парткод: | A0XX361800 |
| Деталь: | FILTER |
| Парткод: | A0XX330100 |
| Деталь: | BUSHING |
| Парткод: | 4163562501 |
| Деталь: | GEAR 22T |
| Парткод: | 4021561901 |
| Деталь: | GEAR 14/16T |
| Парткод: | 4021561801 |
| Деталь: | SEAL |
| Парткод: | 4163561701 |
| Деталь: | Cleaning Housing |
| Парткод: | A0XX360200 |
| Деталь: | SEAL |
| Парткод: | 4163560403 |
| Деталь: | DRUM CHARGE UNIT |
| Парткод: | A1XUR70100 |
| Деталь: | SPRING |
| Парткод: | 4021410801 |
| Деталь: | Holder /Rear |
| Парткод: | A0XX333201 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0600 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP4400 |
| Деталь: | CONTACT |
| Парткод: | A0XXPP1700 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0XXPP5S00 |
| Деталь: | ARM |
| Парткод: | A0XXPP2V00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4034230501 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP4W01 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XXPP1R00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP6V00 |
| Деталь: | MICRO SWITCH |
| Парткод: | 9J06M60100 |
| Деталь: | PH Unit |
| Парткод: | A1XTR70011 |
| Деталь: | SUPPORTER |
| Парткод: | 4034220501 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A00J307000 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0XXPP5T00 |
| Деталь: | PH Cover |
| Парткод: | A0XXPP1J00 |
| Деталь: | REAR COVER |
| Парткод: | A0XXPP1K00 |
| Деталь: | Rear upper cover |
| Парткод: | A0XXPP2H00 |
| Деталь: | COVER |
| Парткод: | A0XXPP4U00 |
| Деталь: | COVER |
| Парткод: | A0XXPP2R00 |
| Деталь: | RIGHT REAR COVER |
| Парткод: | A0XXPP2J00 |
| Деталь: | RIGHT UPPER COVER |
| Парткод: | A0XXPP2G00 |
| Деталь: | Right Exit Tray |
| Парткод: | A0XXPP2P00 |
| Деталь: | SPACER |
| Парткод: | A0XXPP5J01 |
| Деталь: | Print Cover Panel |
| Парткод: | A0XXPP5C01 |
| Деталь: | Front door |
| Парткод: | A0XXPP2F00 |
| Деталь: | COVER |
| Парткод: | A0XXPP5201 |
| Деталь: | FRONT COVER |
| Парткод: | A0XXPP7C00 |
| Деталь: | FRONT COVER |
| Парткод: | A0XXPP2M00 |
| Деталь: | FRONT COVER |
| Парткод: | A0XXPP2K00 |
| Деталь: | LEFT COVER |
| Парткод: | A0XXPP2N00 |
| Деталь: | Left Exit Tray |
| Парткод: | A0XXPP2Q00 |
| Деталь: | Rear Left Cover |
| Парткод: | A0XXPP1H00 |
| Деталь: | COVER |
| Парткод: | A0XXPP2T00 |
| Деталь: | Label bizhub 165 |
| Парткод: | A0XXPP9X00 |
| Деталь: | Label bizhub 185 |
| Парткод: | A0XXPP9W00 |
| Деталь: | Label bizhub 7818 |
| Парткод: | A0XXPQ0100 |
| Деталь: | Logo Mark |
| Парткод: | A00J945500 |
| Деталь: | HOPPER DRIVE ASSY |
| Парткод: | A0XXPP6K00 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3U01 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3T01 |
| Деталь: | COVER |
| Парткод: | A0XXPP3Q01 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3S01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4038541202 |
| Деталь: | JOINT |
| Парткод: | A0ED240700 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP3V01 |
| Деталь: | RIGHT COVER |
| Парткод: | A0XXPP3K00 |
| Деталь: | FAN MOTOR |
| Парткод: | 9J03M10000 |
| Деталь: | SCREW |
| Парткод: | 4163529301 |
| Деталь: | LEVER |
| Парткод: | A0XXPP3J00 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP9U00 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP3M00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XXPP1V01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XXPP1X01 |
| Деталь: | BUSHING |
| Парткод: | A0XXPP3H01 |
| Деталь: | NEUTRALIZING NEEDLE |
| Парткод: | A0XXPP0S00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP5002 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP5M01 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP5102 |
| Деталь: | TRANSFER ROLLER ASSY |
| Парткод: | A0XXPP6H01 |
| Деталь: | CONTACT |
| Парткод: | A0XXPP0T00 |
| Деталь: | CONTACT |
| Парткод: | A0XXPP1U00 |
| Деталь: | HINGE |
| Парткод: | A0XXPP0Y00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0B00 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XXPP0V00 |
| Деталь: | RESISTOR |
| Парткод: | A3PEPP6H00 |
| Деталь: | CONTACT |
| Парткод: | A0XXPP0U00 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP9V00 |
| Деталь: | RIGHT LOWER COVER |
| Парткод: | A0XXPP2S00 |
| Деталь: | MOTOR |
| Парткод: | A0XXPP5W00 |
| Деталь: | SHAFT |
| Парткод: | A0XXPP1Y00 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP0P00 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3800 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3201 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3701 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3601 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3501 |
| Деталь: | GEAR |
| Парткод: | A0XXPP2W01 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3101 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3301 |
| Деталь: | GEAR |
| Парткод: | A0XXPP2X01 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3401 |
| Деталь: | GEAR |
| Парткод: | A0XXPP3001 |
| Деталь: | BUSHING |
| Парткод: | 4021254702 |
| Деталь: | SHAFT |
| Парткод: | A0XXPP2000 |
| Деталь: | CLUTCH |
| Парткод: | A0XXPP5V00 |
| Деталь: | GEAR |
| Парткод: | A0XXPP2Y01 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP0N00 |
| Деталь: | Timing Roller Assy |
| Парткод: | A0XXPP6A00 |
| Деталь: | SHAFT |
| Парткод: | A0XXPP2301 |
| Деталь: | ROLLER |
| Парткод: | A0XXPP3P00 |
| Деталь: | ROLLER |
| Парткод: | A0XXPP5501 |
| Деталь: | TORSION SPRING |
| Парткод: | 4034353401 |
| Деталь: | ACTUATOR |
| Парткод: | A0XXPP3N01 |
| Деталь: | TENSION SPRING |
| Парткод: | A0XXPP0X01 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP5300 |
| Деталь: | BUSHING |
| Парткод: | 4025357201 |
| Деталь: | ACTUATOR |
| Парткод: | 1164302701 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335130061 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0A00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0900 |
| Деталь: | PLATE SPRING |
| Парткод: | 1164305401 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP3G01 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP0W01 |
| Деталь: | COVER |
| Парткод: | A0XXPP4800 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XXPP1M00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0XXPP8800 |
| Деталь: | MICRO SWITCH |
| Парткод: | 9J06M60100 |
| Деталь: | LEVER |
| Парткод: | A0XXPP4700 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP2U00 |
| Деталь: | REINFORCE PLATE |
| Парткод: | A0XXPP1P00 |
| Деталь: | RUBBER FOOT |
| Парткод: | 4128201901 |
| Деталь: | STOPPER |
| Парткод: | 4686330401 |
| Деталь: | SWITCH |
| Парткод: | A0XXPP0000 |
| Деталь: | REINFORCE PLATE |
| Парткод: | A0XXPP1Q00 |
| Деталь: | WASHER |
| Парткод: | A0XXPP7800 |
| Деталь: | Fusing/Paper Exit Assy 230V |
| Парткод: | A0XXPP6X00 |
| Деталь: | Fusing/Paper Exit Assy 120V |
| Парткод: | A0XXPP7000 |
| Деталь: | Fusing/Paper Exit Assy 110V |
| Парткод: | A0XXPP6Y00 |
| Деталь: | PLATE NUT |
| Парткод: | 4002504202 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0500 |
| Деталь: | CONTACT |
| Парткод: | A0XXPP1401 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0700 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4021210101 |
| Деталь: | CONTACT |
| Парткод: | A0XXPP1601 |
| Деталь: | CONTACT |
| Парткод: | A0XXPP1501 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP3900 |
| Деталь: | TRAY |
| Парткод: | A0XXPP4A01 |
| Деталь: | TRAY |
| Парткод: | A0XXPP4902 |
| Деталь: | BRAKE |
| Парткод: | 4038328601 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0XXPP4D00 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0XXPP4C00 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XXPP1D01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335130061 |
| Деталь: | ACTUATOR |
| Парткод: | A0XXPP4M01 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP1N00 |
| Деталь: | BRAKE |
| Парткод: | 4038325501 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XXPP1T00 |
| Деталь: | COLLAR |
| Парткод: | A0XXPP6S00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP4500 |
| Деталь: | HOLD PLATE |
| Парткод: | 4038321501 |
| Деталь: | PLATE SPRING |
| Парткод: | 4039328201 |
| Деталь: | BUSHING |
| Парткод: | 4131353202 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP5400 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP4V00 |
| Деталь: | CAM |
| Парткод: | 4038323601 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030347501 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP1W01 |
| Деталь: | FRAME |
| Парткод: | A0XXPP1900 |
| Деталь: | SHAFT |
| Парткод: | A0XXPP2601 |
| Деталь: | GEAR |
| Парткод: | A0XXPP4H01 |
| Деталь: | CLUTCH |
| Парткод: | A0XXPP5V00 |
| Деталь: | GEAR |
| Парткод: | A0XXPP4K01 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XXPP0200 |
| Деталь: | BRACKET |
| Парткод: | A0XXPP1A00 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP1C00 |
| Деталь: | HOLDER |
| Парткод: | A0XXPP4G01 |
| Деталь: | SOLENOID |
| Парткод: | 9J06M20000 |
| Деталь: | LEVER |
| Парткод: | A0XXPP4J01 |
| Деталь: | COLLAR |
| Парткод: | A0XXPP5700 |
| Деталь: | COVER |
| Парткод: | A0XXPP4Y00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP5K00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP4F00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP4B01 |
| Деталь: | GUIDE PLATE |
| Парткод: | A0XXPP1B00 |
| Деталь: | PAPER FEED ROLLER |
| Парткод: | A0XX594700 |
| Деталь: | FRICTION SHEET |
| Парткод: | 4687328101 |
| Деталь: | GEAR |
| Парткод: | A0XXPP4E01 |
| Деталь: | GUIDE |
| Парткод: | 4038326802 |
| Деталь: | GUIDE |
| Парткод: | 4030340301 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4030340201 |
| Деталь: | GUIDE |
| Парткод: | 4038326902 |
| Деталь: | SEPARATION ROLLER |
| Парткод: | 4034015101 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP6T00 |
| Деталь: | SHAFT |
| Парткод: | A0XXPP2401 |
| Деталь: | CLUTCH ASSY |
| Парткод: | 4038326001 |
| Деталь: | BUSHING |
| Парткод: | 4030309301 |
| Деталь: | SHAFT |
| Парткод: | A0XXPP2501 |
| Деталь: | Label Warning |
| Парткод: | A0XXPP7700 |
| Деталь: | COVER |
| Парткод: | A0XXPP4600 |
| Деталь: | Control Panel Assy (English) |
| Парткод: | A0XXPP9301 |
| Деталь: | Control Panel Assy (Traditional) |
| Парткод: | A0XXPP9401 |
| Деталь: | Control Panel Assy (Simplified) |
| Парткод: | A0XXPP9501 |
| Деталь: | Print Number Key |
| Парткод: | A0XXPP9D00 |
| Деталь: | Control Panel (English) |
| Парткод: | A0XXPP9600 |
| Деталь: | Control Panel (Traditional) |
| Парткод: | A0XXPP9700 |
| Деталь: | Control Panel (Simplified) |
| Парткод: | A0XXPP9800 |
| Деталь: | Print Reset Key |
| Парткод: | A0XXPP9G00 |
| Деталь: | Print Stop Key |
| Парткод: | A0XXPP9H00 |
| Деталь: | Cover Start Key |
| Парткод: | A0XXPP9K00 |
| Деталь: | Start Key |
| Парткод: | A0XXPP9J00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP9M00 |
| Деталь: | Print Arrow Key |
| Парткод: | A0XXPP9900 |
| Деталь: | Print Select Key (ENGLISH) |
| Парткод: | A0XXPP9A00 |
| Деталь: | Print Select Key (Traditional) |
| Парткод: | A0XXPP9B00 |
| Деталь: | Print Select Key (Simplified) |
| Парткод: | A0XXPP9C00 |
| Деталь: | GUIDE |
| Парткод: | A0XXPP9N02 |
| Деталь: | PW Board Assy |
| Парткод: | A0XXPP9P00 |
| Деталь: | Set Key |
| Парткод: | A0XXPP9E00 |
| Деталь: | Function Key |
| Парткод: | A0XXPP9F00 |
| Деталь: | LCD Assy |
| Парткод: | A0XXPP9Q00 |
| Деталь: | IR Cover Assy |
| Парткод: | A0XXPP9201 |
| Деталь: | FCC Panel |
| Парткод: | A0XXPQ0200 |
| Деталь: | COVER |
| Парткод: | A0XXPP9100 |
| Деталь: | Mylar |
| Парткод: | A0XXPQ0300 |
| Деталь: | Mylar |
| Парткод: | A0XXPQ0400 |
Коды ошибок
C0211
C2351
C2557
C2558
C255C
C2702
C3451
C3751
C3752
C3851
C4001
C4101
C5102
C6101
C9401
CC102
CC151
CC153
CC163
CD301
Описание
| Error code: | C0211 |
| Description: | Tray 1 feeder up/down abnormality • The paper feed tray 1 lift-up position sensor is not unblocked even when the transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the standby position to the feed position was started. • The paper feed tray 1 lift-up position sensor is not blocked even when the transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the feed position to the standby position was started. |
| Causes: | • Bypass lift-up motor (M26) • Bypass upper limit sensor (PS35) • Bypass lower limit sensor (PS36) • Paper feed/transport drive board (PFTDB) • MFP board (MFPB) |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 PS17 I/O check PRCB CN6PRCB-7 (ON) D-2. 4 SL1 operation check PRCB CN6PRCB-4 (ON) D-1. 5 M1 operation check PRCB CN34PRCB-10 (REM) PRCB CN34PRCB-13 (LOCK) D-22. 6 Change SL1. 7 Change M1. 8 Change PRCB. |
| Error code: | C2351 |
| Description: | Cleaning motor K error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s. |
| Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective cleaning motor K. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC16 on the engine PWB and the connector of the cleaning motor K, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective cleaning motor K. Run maintenance item U030 and check if the cleaning motor K operates when YC16- B13 (remote signal) on the engine PWB goes low. If not, replace the cleaning motor K. Defective engine PWB. Run maintenance item U030 and check if YC16-B13 (remote signal) on the engine PWB goes low. If not, replace the engine PWB. |
| Error code: | C2557 |
| Description: | Abnormally low toner density detected black TCR sensor • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 4 % or less for a given number of times consecutively. |
| Causes: | • Developing unit • Toner cartridge • Toner empty sensor/K (PZS/K) • Toner supply motor/K (M12) • Toner cartridge motor/CK (M14) • MFP board (MFPB) |
| Remedy: | 1 M3 operation check (At this time, IU must be non-installation.) PRCB CN39PRCB-1 to 4 D-23. 2 Reinstall imaging unit. 3 Reinstall toner cartridge. 4 Change imaging unit /K. 5 Change PRCB. |
| Error code: | C2558 |
| Description: | Abnormally high toner density detected black TCR sensor • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 11 % or more for a given number of times consecutively. • When the connector of the TCR sensor is disconnected. |
| Causes: | • Developing unit • Toner cartridge • Sub hopper unit • MFP board (MFPB) |
| Remedy: | 1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 Change imaging unit /K. 4 Change PRCB. |
| Error code: | C255C |
| Description: | Black TCR sensor adjustment failure • TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value. |
| Causes: | • Developing unit • MFP board (MFPB) |
| Remedy: | 1 Reinstall imaging unit /K. 2 Change imaging unit /K. 3 Change PRCB. |
| Error code: | C2702 |
| Description: | Abnormal image transfer voltage • The image transfer voltage remains more than 100 V continuously for a given period of time while the drum remains stationary. |
| Causes: | Transfer roller unit High voltage unit (HV1) Printer control board (PRCB) |
| Remedy: | 1 Check the transfer roller unit for installation. 2 Change HV1. 3 Change PRCB. |
| Error code: | C3451 |
| Description: | Heating Roller warm-up failure • The temperature of the Heating Roller does not reach 100 °C within 50 sec. after the Heating Roller Heater Lamp has been turned ON. • The temperature of the Heating Roller does not reach 100 °C and that of the Fusing Pressure Roller does not reach 195 °C within 200 sec. after the Heating Roller Heater Lamp has been turned ON. • The voltage of the Heating Roller Thermistor does not increase by five steps within 20 sec. after the Heating Roller Heater Lamp has been turned ON. • No zero cross signal is detected even with the lapse of 1 sec. or more after the Heating Roller Heater Lamp has been turned ON. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C3751 |
| Description: | Heating Roller abnormally high temperature • A temperature of 225 °C or more of the Heating Roller is detected for 1 sec. or more. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C3752 |
| Description: | Fusing Pressure Roller abnormally high temperature • A temperature of 190 °C or more of the Fusing Pressure Roller is detected for 1 sec. or more before the start of the heater temperature control. • A temperature of 215 °C or more of the Fusing Pressure Roller is detected for 1 sec. or more after the start of the heater temperature control. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C3851 |
| Description: | Heating Roller abnormally low temperature • No zero cross signal is detected even with the lapse of 1 sec. or more during a standby state, print cycle, or Power Save. • A temperature of 120 °C or less of the Heating Roller is detected for 1 sec. or more during a standby state. • A temperature of 120 °C or less of the Heating Roller is detected for 1 sec. or more during a print cycle. • A temperature of 70 °C or less of the Heating Roller is detected for 1 sec. or more during Power Save. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C4001 |
| Description: | Polygon motor synchronization error |
| Causes: | The ready signal is not at the L level when passing 30s after the polygon motor drive starts. |
| Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Polygon motor - Engine PWB Wiring diagram 2 Checking the polygon motor The polygon motor does not rotate properly. Check the rotation sound of the polygon motor, and reattach or replace the LSU if it does not rotate properly. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C4101 |
| Description: | BD initialization error |
| Causes: | The BD signal was not detected for 1s after driving the polygon motor. |
| Remedy: | 1 Checking the connection The connector or the FFC terminal is not properly connected, or the wire or the FFC is faulty. Reconnect the following wire connectors and reconnect the FFC. If there is no continuity, replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. • APC PWB - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C5102 |
| Description: | Main high-voltage error C |
| Causes: | When the flow-in current with the Vpp variable in 3 steps is measured during the Vpp adjustment, difference between the zero current value and 2nd step current value is less than the reference value. (The Vpp is adjusted at warm-up, before calibration or before print when the in-machine temperature varies largely from the one at the last time Vpp adjustment.) |
| Remedy: | 1 Reinstalling the main highvoltage PWB Proper electric current does not flow as the main charger roller contact is not properly grounded. Correct the main charger roller contact (wire spring) at the inner side of the main high-voltage PWB so that it is firmly grounded. Detaching and reattaching the main highvoltage PWB 2 Checking the drum unit and the developer unit The drum or the drum screw is not rotated properly due to the excessive load. Check if the drum or the drum screw is rotated manually, and replace the drum unit if not rotated. Detaching and reattaching the drum unit 3 Replacing drum motor C Drum motor C is faulty. Replace drum motor C. Detaching and reattaching drum drive unit K and drum drive unit MCY 4 Checking the main charger unit Proper electric current does not flow as the foreign objects are adhered on the high-voltage contact of the main charger roller unit. Clean the high-voltage contact of the main charger roller unit and apply conductive grease to the roller shaft. Detaching and reattaching the main charger roller unit 5 Replacing the main charger roller unit Proper electric current does not flow due to deformation or damage of the high-voltage contact of the main charger roller unit. Replace the main charger roller unit and execute U930. Detaching and reattaching the main charger roller unit 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • Main highvoltage PWB - Engine PWB Wiring diagram 7 Replacing the main highvoltage PWB The main high-voltage PWB is faulty. Replace the main high-voltage PWB. Detaching and reattaching the main highvoltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C6101 |
| Description: | Scanner home detection failure • When the power switch is turned ON or a scan operation is completed, detecting the home position fails. |
| Causes: | Scanner motor (M4) CIS module (CIS) Printer control board (PRCB) |
| Remedy: | 1 Turn OFF and ON the power switch. 2 Check the connector between M4-PRCB P101 for proper connection and correct as necessary. 3 Check M4 for correct drive coupling and correct as necessary. 4 Check the connector between CIS-PRCB P102 for proper connection and correct as necessary. 5 M4 operation check PRCB P101-1 to 4 11-F 6 Change M4. 7 Change CIS 8 Change PRCB. |
| Error code: | C9401 |
| Description: | Exposure LED lighting failure The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment. |
| Causes: | • LED exposure unit (LA201) • Flat cable • CCD board (CCDB) • Scanner drive board (SCDB) • MFP board (MFPB) |
| Remedy: | 1 Check the connection between SCDB-LU201, and correct if necessary. 2 Check the connector between SCDB PJ1-PRCB CN43 for proper connection and correct as necessary. 3 Check the connector between CCDB PJ3-MFPB PJ01 for proper connection and correct as necessary. 4 Replace the LED exposure unit. 5 Replace CCDB. 6 Replace SCDB. 7 Replace PRCB. 8 Replace MFPB. |
| Error code: | CC102 |
| Description: | Controller - engine connection failure • The engine control system can not communicate with the controller. |
| Causes: | Printer control board (PRCB) |
| Remedy: | 1 Turn OFF and ON the power switch. 2 Change PRCB. |
| Error code: | CC151 |
| Description: | ROM contents error upon startup (MSC) • A fault is detected in a sequence of ROM contents check of the MSC (PRCB) during starting |
| Remedy: | 1 Check the ROM version. 2 Rewrite the firmware. 3 Replace the appropriate board. |
| Error code: | CC153 |
| Description: | ROM contents error upon startup (PRT) • A fault is detected in a sequence of ROM contents check of the mechanical control board (MFPB) during starting. |
| Remedy: | 1 Check the ROM version. 2 Rewrite the firmware. 3 Replace the appropriate board. |
| Error code: | CC163 |
| Description: | ROM contents error (PRT) • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked. |
| Causes: | • eMMC board (eMMC) • MFP board (MFPB) |
| Remedy: | 1 Rewrite the firmware. 2 Change PRCB 2.1. Turn OFF the power switch and replace the current PRCB with a new one. (When using a PRCB of another machine in service, be sure to use a PRCB installed in the same model.) 2.2. Update the PRCB firmware. 2.3. After completing the firmware update, turn OFF and ON the power switch and check to see that warm-up is started. 2.4. When the trouble cannot be solved, reinstall the removed PRCB to the original board. NOTE • When taking the above steps, check whether PRCB is defective or not without replacing the SV ERB. 3 Change SV ERB 3.1. Replace the current SV ERB with a new one. 3.2. Turn ON the power switch and check to see that warm-up is started. (One minute is spent to prepare the new SV ERB for use. During the period, the control panel backlight stays off.) 3.3. Make the specified readjustments. 4 If the above actions do not solve the problem, contact KMBT. |
| Error code: | CD301 |
| Description: | EEPROM error |
| Remedy: | • Contact the responsible people of KMBT before taking some countermeasures. |
Название
Konica Minolta Печь в сборе
Konica Minolta TN116 Тонер-картридж (2 тубы)
Konica Minolta Блок проявки
