Konica-Minolta Magicolor 2350

Рейтинг

Модули

FRAMES (OPTION)

HOUSING

FUSING/PAPER EXIT SECTION

PAPER TRAY UNIT (OPTION)

TRANSPORT SECTION

ELECTRICAL COMPONENTS

PAPER TAKE-UP SECTION

DRIVE SECTION (B)

FRAMES

DRIVE SECTION (A)

DUPLEX UNIT (OPTION)

PAPER TRANSPORT SECTION

RACK/TRANSFER SECTION

Детали HOUSING

Деталь:	RIGHT COVER
Парткод:	4131 1013 03

Деталь:	RIGHT COVER
Парткод:	4131 1813 01

Деталь:	RIGHT COVER
Парткод:	4131 1010 07

Деталь:	RIGHT COVER
Парткод:	4131 1006 04

Деталь:	RIGHT COVER
Парткод:	4131 1806 01

Деталь:	RIGHT COVER
Парткод:	4131 1011 05

Деталь:	RIGHT COVER
Парткод:	4131 1811 01

Деталь:	FILTER
Парткод:	4131 3622 01

Деталь:	SEAL
Парткод:	4131 1024 01

Деталь:	PANEL SHEET
Парткод:	4131 1118 02

Деталь:	PANEL SHEET
Парткод:	4131 1119 02

Деталь:	PANEL SHEET
Парткод:	4131 1125 02

Деталь:	RIGHT COVER
Парткод:	4131 1007 03

Деталь:	RIGHT COVER
Парткод:	4131 1807 01

Деталь:	PANEL
Парткод:	4131 1110 02

Деталь:	PANEL
Парткод:	4131 1120 01

Деталь:	TOP COVER
Парткод:	4131 1001 06

Деталь:	TOP COVER
Парткод:	4131 1801 01

Деталь:	TRAY
Парткод:	4131 1012 04

Деталь:	REAR COVER
Парткод:	4131 1008 03

Деталь:	SOUND SHIELD
Парткод:	4131 2322 01

Деталь:	SCREW
Парткод:	4131 2350 01

Деталь:	FAN MOTOR
Парткод:	9313 1100 41

Деталь:	COVER
Парткод:	4131 1009 02

Деталь:	COVER
Парткод:	4131 2357 01

Деталь:	BRACKET
Парткод:	4131 2354 02

Деталь:	BRACKET
Парткод:	4131 2356 01

Деталь:	BRACKET
Парткод:	4131 2359 01

Деталь:	PWB ASSY
Парткод:	4131 6013 01 Old

Деталь:	PWB ASSY
Парткод:	4131 6016 01

Деталь:	PWB ASSY
Парткод:	4131 6007 01 Old

Деталь:	PWB ASSY
Парткод:	4131 6017 01

Деталь:	PWB ASSY
Парткод:	4131 6008 01 Old

Деталь:	PWB ASSY
Парткод:	4131 6010 01

Деталь:	PWB ASSY
Парткод:	4131 7807 01

Деталь:	LEFT COVER
Парткод:	4131 1003 05

Деталь:	LEFT COVER
Парткод:	4131 1803 01

Деталь:	FILTER
Парткод:	4131 1025 01

Деталь:	PLATE SPRING
Парткод:	4131 4702 03

Деталь:	COVER
Парткод:	4131 1030 06

Деталь:	COVER
Парткод:	4131 1034 01

Деталь:	Waste Toner Bottle
Парткод:	4337110

Деталь:	Waste Toner Bottle
Парткод:	4337111

Деталь:	LABEL
Парткод:	4131 7382 02

Деталь:	LABEL
Парткод:	4131 7427 13

Деталь:	MATING MEMBER
Парткод:	4131 1026 01

Деталь:	COVER
Парткод:	4131 1005 01

Деталь:	COVER
Парткод:	4131 1019 01

Деталь:	LABEL
Парткод:	4131 7322 01

Деталь:	LABEL
Парткод:	4131 7323 02

Деталь:	LABEL
Парткод:	4131 7324 01

Деталь:	LABEL
Парткод:	4131 7381 02

Деталь:	LABEL
Парткод:	4131 7549 01

Деталь:	FRONT COVER
Парткод:	4131 1002 05

Деталь:	FRONT COVER
Парткод:	4131 1802 01

Деталь:	LABEL
Парткод:	4131 7401 01

Деталь:	LABEL
Парткод:	4131 7414 01

Деталь:	PWB ASSY
Парткод:	4131 0105 03

Деталь:	SHIELD
Парткод:	4131 1117 01

Деталь:	BUTTON
Парткод:	4131 1112 03

Деталь:	BUTTON
Парткод:	4131 1115 02

Деталь:	BUTTON
Парткод:	4131 1113 02

Деталь:	BUTTON
Парткод:	4131 1114 02

Деталь:	BUTTON
Парткод:	4131 1121 01

Деталь:	COVER
Парткод:	4131 1101 03

Деталь:	COVER
Парткод:	4131 1851 01

Деталь:	WIRE HARNESS ASSY
Парткод:	4131 6836 02

Деталь:	WIRE HARNESS ASSY
Парткод:	4131 6841 01

Деталь:	LABEL
Парткод:	4131 7425 01

Деталь:	LENS
Парткод:	4131 1122 02

Деталь:	PWB ASSY
Парткод:	4131 6009 01

Деталь:	PWB
Парткод:	4127 6015 01

Деталь:	WIRE HARNESS ASSY
Парткод:	4131 6840 01

Деталь:	PANEL
Парткод:	4131 1130 01

Деталь:	LABEL
Парткод:	4131 7385 01

Деталь:	PANEL SHEET
Парткод:	4131 1133 01

Деталь:	SOUND SHIELD
Парткод:	4131 3078 01

Деталь:	PLATE SPRING
Парткод:	4131 3063 01

Деталь:	PLATE SPRING
Парткод:	4131 3064 01

Деталь:	TAPE
Парткод:	4131 3066 01

Деталь:	BRAKE
Парткод:	4131 3065 01

Деталь:	FRONT COVER ASSY
Парткод:	4131 0787 00

Деталь:	FRONT COVER ASSY
Парткод:	4131 0788 00

Коды ошибок

Описание

Парткод

Название

Konica Minolta Емкость отработанного тонера

Konica Minolta Тонер-картридж черный 4500 стр.

Konica Minolta Тонер-картридж желтый 4500 стр.

Konica Minolta Тонер-картридж желтый 1500 стр.

Konica Minolta Тонер-картридж пурпурный 4500 стр.

Konica Minolta Тонер-картридж пурпурный 1500 стр.

Konica Minolta Тонер-картридж голубой 4500 стр.

Konica Minolta Тонер-картридж голубой 1500 стр.

Konica Minolta Комплект цветных тонер-картриджей

Konica Minolta Барабан-картридж

Деталь:	2ND TRANSFER ROLLER ASSY
Парткод:	4131 0370 03

Деталь:	HUMIDITY CONVERTION EL.
Парткод:	9372 5100 12

Деталь:	PAPER TAKE UP DRIVING ASSY
Парткод:	4131 0450 02

Деталь:	TRANSPORT SWITCH ASSY
Парткод:	4131 0350 02

Деталь:	FUSING DECELERTION UNIT
Парткод:	4131 0355 02

Error code:	04
Display:	ERROR CONDITION PAPER OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.
Remedy:	Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration.

Error code:	08
Display:	WARNING HEAD COLD
Description:	The printer prints while the ERROR light flashes.
Causes:	The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	0B
Description:	Transfer Fan Malfunction
Causes:	Ventilation Fan Motor (M6) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M6 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M6 operation check. PWB-A PJ10A-1 (REM) PWB-A PJ10A-3 (LOCK) 2-H 5 Change PWB-A. 6 Change PU.

Error code:	0C
Description:	Power Supply Cooling Fan Malfunction
Causes:	Power Supply Cooling Fan Motor (M4) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M4 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M4 operation check. PWB-A PJ4A-1 (REM) PWB-A PJ4A-3 (LOCK) 7-I 5 Change PWB-A. 6 Change PU.

Error code:	0E
Display:	Paper Jam
Description:	• If the fusing cooling fan motor does not rotate when the unit is turned on
Causes:	1 Harness connection failure of LCD unit. 2 LCD unit failure. 3 Main PCB failure.
Remedy:	1 Check M5 operation. M5_REM 11-E. 2 Replace PU. 3 Replace PWB-A. 4 Replace PWB-P.

Деталь:	BUSHING
Парткод:	4120 4039 02

Деталь:	ACTUATOR
Парткод:	4574 3221 03

Деталь:	PHOTO INTERRUPTER
Парткод:	4131 0902 01

Деталь:	GEAR
Парткод:	4574 3205 01

Error code:	10
Display:	DEFRAGMENTING
Description:	The printer stops.
Causes:	The printer is defragmenting memory.
Remedy:	Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service.

Error code:	14
Description:	Wrinkled ribbon
Causes:	Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned.
Remedy:	See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance.

Error code:	15
Description:	Printing too light or too dark over the entire label
Causes:	The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure.
Remedy:	Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70.

Error code:	16
Description:	Smudge marks on labels
Causes:	The media or ribbon is not designed for high-speed operation.
Remedy:	Replace supplies with those recommended for high-speed operation.

Error code:	17
Description:	Misregistration/skips labels
Causes:	The printer is not calibrated. Improper label format.
Remedy:	Recalibrate the printer. Use correct label format.

Error code:	18
Description:	Misregistration and misprint of one to three labels
Causes:	The platen roller is dirty. Media does not meet specifications.
Remedy:	See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications.

Error code:	19
Description:	Vertical drift in top-of-form position
Causes:	The printer is out of calibration. Vertical drift occurs during normal printer operation. Note • A vertical drift of ± 4 to 6 dot rows (approximately 0.5 mm) is within normal tolerances. The platen roller is dirty.
Remedy:	Recalibrate the printer. Calibrate the printer. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131.

Error code:	1A
Description:	Disconnect
Causes:	Transmission has not started (the phone line is too noisy).
Remedy:	Check the quality of the phone line or restart the transmission at a later time.

Error code:	1B
Description:	Document transmission fault
Causes:	Document transmission error.
Remedy:	Transmission: restart the transmission. Reception: ask your correspondent to retransmit the document.

Error code:	21
Description:	The bar code printed on a label does not scan.
Causes:	The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code.
Remedy:	Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label.