
OKI C3600n
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
светодиодная
Макс. формат
A4
Число страниц в месяц
35000
Скорость печати
A4
20
Цветность печати
цветная
Общие характеристики |
|
---|---|
Тип |
лазерный/светодиодный |
Факс |
|
Печать фотографий |
|
Сканер |
|
Телефон |
|
Копир |
|
Число страниц в месяц |
35 000 |
Технология печати |
светодиодная |
Область применения |
малый офис |
Размещение |
настольный |
Цветность печати |
цветная |
Тип устройства |
Принтер |
Макс. формат |
A4 |
Принтер |
|
Количество цветов |
4 |
Пигментные чернила |
|
Двусторонняя печать |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
По Y | 600 |
По X | 1 200 |
Скорость ч/б печати |
|
A4 | 20 |
Время выхода первого отпечатка |
|
Цветн, | 12 |
Ч/б | 10 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Расходные материалы |
|
Количество картриджей |
4 |
Печать на: |
|
Рулоне |
|
CD/DVD |
|
Конвертах |
![]() |
Карточках |
![]() |
Матовой бумаге |
![]() |
Пленках |
![]() |
Этикетках |
![]() |
Глянцевой бумаге |
![]() |
Плотность бумаги |
|
Максимальная | 203 |
Минимальная | 64 |
Факс |
|
Цветной |
|
Телефон |
|
Caller ID |
|
Стандарт DECT |
|
Автоответчик |
|
Спикерфон |
|
Проводная трубка |
|
Беспроводная трубка |
|
АОН |
|
Шрифты и языки управления |
|
Языки управления |
|
PCL 5e |
|
PostScript 2 |
|
PPDS |
|
PCL 6 |
|
PCL 5c |
![]() |
PostScript |
![]() |
PostScript 3 |
![]() |
Количество установленных шрифтов |
|
PCL | 80 |
PostScript | 80 |
Лотки |
|
Емкость лотка ручной подачи |
1 |
Подача бумаги |
|
Стандартная | 251 |
Максимальная | 251 |
Финишер |
|
Степлер |
|
Сортер |
|
Электронная сортировка |
|
Сортировка со сдвигом |
|
Брошюровщик |
|
Интерфейсы |
|
Версия USB |
2,0 |
Bluetooth |
|
Устройство для чтения карт памяти |
|
FireWire (IEEE 1394) |
|
RS-232 |
|
Инфракрасный порт |
|
LPT |
|
Wi-Fi |
|
Ethernet (RJ-45) |
![]() |
USB |
![]() |
Веб-интерфейс |
![]() |
Память/Процессор |
|
Процессор |
PowerPC |
Объем памяти |
128 |
Макс, объем памяти |
640 |
Частота процессора |
400 |
Дополнительная информация |
|
Экран |
|
Поддержка ОС |
|
DOS |
|
Linux |
![]() |
Mac OS |
![]() |
Windows |
![]() |
Габариты |
|
Высота |
289 |
Вес |
20,9 |
Ширина |
372 |
Глубина |
478 |
Модули
PAPER FEED
(Внутренние компоненты)
(Подача и захват бумаги)
(Узел переноса)
(Детали корпуса)
(Электронные компоненты)
DUPLEX
102 INTERNAL COMPONENTS 1
(Узел термозакрепления)
Детали DUPLEX

Деталь: | Площадка отделения бумаги из кассеты, в сборе |
Парткод: | 42088801 |
Цена: | 1 300 ₽ |
Деталь: | Пружина площадки отделения бумаги из кассеты |
Парткод: | 42089001 |
Цена: | 700 ₽ |
Деталь: | Ролик захвата бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 42052601 |
Цена: | 1 400 ₽ |

Деталь: | Ролик подачи бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 43334801 |
Цена: | 800 ₽ |
Деталь: | Плоский кабель панели управления |
Парткод: | 2381028P0031 |
Цена: | 1 200 ₽ |
Деталь: | MOTOR HARNESS-DRIVE |
Парткод: | 43361601 |
Цена: | 1 400 ₽ |
Деталь: | Правая боковая пластина, в сборе |
Парткод: | 43194101 |
Цена: | 16 400 ₽ |
Деталь: | FRAME MAIN-LEFT, ML-2160,SEC |
Парткод: | 43200101 |
Цена: | 6 000 ₽ |
Деталь: | Inlet-cable assembly |
Парткод: | 43362201 |
Цена: | 3 500 ₽ |
Деталь: | Узел соединения |
Парткод: | 43361901 |
Цена: | 4 100 ₽ |
Деталь: | Шестерня узла переноса изображения (20/121 зуб) |
Парткод: | 42062401 |
Цена: | 1 200 ₽ |
Деталь: | Узел датчика цвета, в сборе |
Парткод: | 43204101 |
Цена: | 6 700 ₽ |
Деталь: | Плоский кабель к узлу датчика цвета |
Парткод: | 2381028P0032 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (левая) |
Парткод: | 43214301 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (правая) |
Парткод: | 43214401 |
Цена: | 1 100 ₽ |
Деталь: | Ось подъёма |
Парткод: | 43207401 |
Цена: | 2 100 ₽ |
Деталь: | GEAR, 16T |
Парткод: | 42066701 |
Цена: | 850 ₽ |
Деталь: | Feed assembly, lower |
Парткод: | 43209301 |
Цена: | 6 200 ₽ |
Деталь: | Плоский кабель к плате высоковольтного питания |
Парткод: | 2381028P0034 |
Цена: | 1 000 ₽ |
Деталь: | FUSER FAN |
Парткод: | 43198901 |
Цена: | 2 600 ₽ |
Деталь: | Separator pad (M377, M477) |
Парткод: | 43197201 |
Цена: | 1 300 ₽ |
Деталь: | INTER. TRANSFER BELT ASSY |
Парткод: | 43378002 |
Цена: | 13 200 ₽ |
Деталь: | MOTOR MAIN |
Парткод: | 43195101 |
Цена: | 7 300 ₽ |
Деталь: | Toner sensor PCB assembly |
Парткод: | 43614901 |
Цена: | 3 300 ₽ |
Деталь: | Мотор привода подъёма |
Парткод: | 43353101 |
Цена: | 2 700 ₽ |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | 43208101 |
Цена: | 3 700 ₽ |
Деталь: | HVPS (T) PCA assembly (M553n) |
Парткод: | 43035201 |
Цена: | 11 000 ₽ |
Деталь: | Узел переключения питания (220В) |
Парткод: | 43505401 |
Цена: | 8 900 ₽ |
Деталь: | FIXING ASSEMBLY |
Парткод: | 43377003 |
Цена: | 10 300 ₽ |
Деталь: | PARTS COVER FRONT ASSY SP |
Парткод: | 43209201 |
Цена: | 3 500 ₽ |
Деталь: | COVER, REAR |
Парткод: | 43215201 |
Цена: | 3 000 ₽ |
Деталь: | Задняя откидная крышка (основание) |
Парткод: | 43215301 |
Цена: | 2 100 ₽ |
Деталь: | Задняя откидная крышка (выдвижная часть) |
Парткод: | 43215401 |
Цена: | 1 500 ₽ |
Деталь: | COVER, RIGHT |
Парткод: | 43215601 |
Цена: | 3 200 ₽ |
Деталь: | LEFT COVER ASSY |
Парткод: | 43215501 |
Цена: | 3 300 ₽ |
Деталь: | Передняя откидная крышка |
Парткод: | 43210701 |
Цена: | 2 700 ₽ |
Деталь: | Ролик захвата бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 42052601 |
Цена: | 1 400 ₽ |

Деталь: | Ролик подачи бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 43334801 |
Цена: | 800 ₽ |
Деталь: | Плоский кабель панели управления |
Парткод: | 2381028P0031 |
Цена: | 1 200 ₽ |
Деталь: | MOTOR HARNESS-DRIVE |
Парткод: | 43361601 |
Цена: | 1 400 ₽ |
Деталь: | Правая боковая пластина, в сборе |
Парткод: | 43194101 |
Цена: | 16 400 ₽ |
Деталь: | FRAME MAIN-LEFT, ML-2160,SEC |
Парткод: | 43200101 |
Цена: | 6 000 ₽ |
Деталь: | Inlet-cable assembly |
Парткод: | 43362201 |
Цена: | 3 500 ₽ |
Деталь: | Узел соединения |
Парткод: | 43361901 |
Цена: | 4 100 ₽ |
Деталь: | Шестерня узла переноса изображения (20/121 зуб) |
Парткод: | 42062401 |
Цена: | 1 200 ₽ |
Деталь: | Узел датчика цвета, в сборе |
Парткод: | 43204101 |
Цена: | 6 700 ₽ |
Деталь: | Плоский кабель к узлу датчика цвета |
Парткод: | 2381028P0032 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (левая) |
Парткод: | 43214301 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (правая) |
Парткод: | 43214401 |
Цена: | 1 100 ₽ |
Деталь: | Ось подъёма |
Парткод: | 43207401 |
Цена: | 2 100 ₽ |
Деталь: | GEAR, 16T |
Парткод: | 42066701 |
Цена: | 850 ₽ |
Деталь: | Feed assembly, lower |
Парткод: | 43209301 |
Цена: | 6 200 ₽ |
Деталь: | Плоский кабель к плате высоковольтного питания |
Парткод: | 2381028P0034 |
Цена: | 1 000 ₽ |
Деталь: | FUSER FAN |
Парткод: | 43198901 |
Цена: | 2 600 ₽ |
Деталь: | Separator pad (M377, M477) |
Парткод: | 43197201 |
Цена: | 1 300 ₽ |
Деталь: | INTER. TRANSFER BELT ASSY |
Парткод: | 43378002 |
Цена: | 13 200 ₽ |
Деталь: | MOTOR MAIN |
Парткод: | 43195101 |
Цена: | 7 300 ₽ |
Деталь: | Toner sensor PCB assembly |
Парткод: | 43614901 |
Цена: | 3 300 ₽ |
Деталь: | Мотор привода подъёма |
Парткод: | 43353101 |
Цена: | 2 700 ₽ |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | 43208101 |
Цена: | 3 700 ₽ |
Деталь: | HVPS (T) PCA assembly (M553n) |
Парткод: | 43035201 |
Цена: | 11 000 ₽ |
Деталь: | Узел переключения питания (220В) |
Парткод: | 43505401 |
Цена: | 8 900 ₽ |
Деталь: | FIXING ASSEMBLY |
Парткод: | 43377003 |
Цена: | 10 300 ₽ |
Деталь: | PARTS COVER FRONT ASSY SP |
Парткод: | 43209201 |
Цена: | 3 500 ₽ |
Деталь: | COVER, REAR |
Парткод: | 43215201 |
Цена: | 3 000 ₽ |
Деталь: | Задняя откидная крышка (основание) |
Парткод: | 43215301 |
Цена: | 2 100 ₽ |
Деталь: | Задняя откидная крышка (выдвижная часть) |
Парткод: | 43215401 |
Цена: | 1 500 ₽ |
Деталь: | COVER, RIGHT |
Парткод: | 43215601 |
Цена: | 3 200 ₽ |
Деталь: | LEFT COVER ASSY |
Парткод: | 43215501 |
Цена: | 3 300 ₽ |
Деталь: | Передняя откидная крышка |
Парткод: | 43210701 |
Цена: | 2 700 ₽ |
Деталь: | Ролик захвата бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 42052601 |
Цена: | 1 400 ₽ |

Деталь: | Ролик подачи бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 43334801 |
Цена: | 800 ₽ |
Деталь: | Плоский кабель панели управления |
Парткод: | 2381028P0031 |
Цена: | 1 200 ₽ |
Деталь: | MOTOR HARNESS-DRIVE |
Парткод: | 43361601 |
Цена: | 1 400 ₽ |
Деталь: | Правая боковая пластина, в сборе |
Парткод: | 43194101 |
Цена: | 16 400 ₽ |
Деталь: | FRAME MAIN-LEFT, ML-2160,SEC |
Парткод: | 43200101 |
Цена: | 6 000 ₽ |
Деталь: | Inlet-cable assembly |
Парткод: | 43362201 |
Цена: | 3 500 ₽ |
Деталь: | Узел соединения |
Парткод: | 43361901 |
Цена: | 4 100 ₽ |
Деталь: | Шестерня узла переноса изображения (20/121 зуб) |
Парткод: | 42062401 |
Цена: | 1 200 ₽ |
Деталь: | Узел датчика цвета, в сборе |
Парткод: | 43204101 |
Цена: | 6 700 ₽ |
Деталь: | Плоский кабель к узлу датчика цвета |
Парткод: | 2381028P0032 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (левая) |
Парткод: | 43214301 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (правая) |
Парткод: | 43214401 |
Цена: | 1 100 ₽ |
Деталь: | Ось подъёма |
Парткод: | 43207401 |
Цена: | 2 100 ₽ |
Деталь: | GEAR, 16T |
Парткод: | 42066701 |
Цена: | 850 ₽ |
Деталь: | Feed assembly, lower |
Парткод: | 43209301 |
Цена: | 6 200 ₽ |
Деталь: | Плоский кабель к плате высоковольтного питания |
Парткод: | 2381028P0034 |
Цена: | 1 000 ₽ |
Деталь: | FUSER FAN |
Парткод: | 43198901 |
Цена: | 2 600 ₽ |
Деталь: | Separator pad (M377, M477) |
Парткод: | 43197201 |
Цена: | 1 300 ₽ |
Деталь: | INTER. TRANSFER BELT ASSY |
Парткод: | 43378002 |
Цена: | 13 200 ₽ |
Деталь: | MOTOR MAIN |
Парткод: | 43195101 |
Цена: | 7 300 ₽ |
Деталь: | Toner sensor PCB assembly |
Парткод: | 43614901 |
Цена: | 3 300 ₽ |
Деталь: | Мотор привода подъёма |
Парткод: | 43353101 |
Цена: | 2 700 ₽ |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | 43208101 |
Цена: | 3 700 ₽ |
Деталь: | HVPS (T) PCA assembly (M553n) |
Парткод: | 43035201 |
Цена: | 11 000 ₽ |
Деталь: | Узел переключения питания (220В) |
Парткод: | 43505401 |
Цена: | 8 900 ₽ |
Деталь: | FIXING ASSEMBLY |
Парткод: | 43377003 |
Цена: | 10 300 ₽ |
Деталь: | PARTS COVER FRONT ASSY SP |
Парткод: | 43209201 |
Цена: | 3 500 ₽ |
Деталь: | COVER, REAR |
Парткод: | 43215201 |
Цена: | 3 000 ₽ |
Деталь: | Задняя откидная крышка (основание) |
Парткод: | 43215301 |
Цена: | 2 100 ₽ |
Деталь: | Задняя откидная крышка (выдвижная часть) |
Парткод: | 43215401 |
Цена: | 1 500 ₽ |
Деталь: | COVER, RIGHT |
Парткод: | 43215601 |
Цена: | 3 200 ₽ |
Деталь: | LEFT COVER ASSY |
Парткод: | 43215501 |
Цена: | 3 300 ₽ |
Деталь: | Передняя откидная крышка |
Парткод: | 43210701 |
Цена: | 2 700 ₽ |
Деталь: | Ролик захвата бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 42052601 |
Цена: | 1 400 ₽ |

Деталь: | Ролик подачи бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 43334801 |
Цена: | 800 ₽ |
Деталь: | Плоский кабель панели управления |
Парткод: | 2381028P0031 |
Цена: | 1 200 ₽ |
Деталь: | MOTOR HARNESS-DRIVE |
Парткод: | 43361601 |
Цена: | 1 400 ₽ |
Деталь: | Правая боковая пластина, в сборе |
Парткод: | 43194101 |
Цена: | 16 400 ₽ |
Деталь: | FRAME MAIN-LEFT, ML-2160,SEC |
Парткод: | 43200101 |
Цена: | 6 000 ₽ |
Деталь: | Inlet-cable assembly |
Парткод: | 43362201 |
Цена: | 3 500 ₽ |
Деталь: | Узел соединения |
Парткод: | 43361901 |
Цена: | 4 100 ₽ |
Деталь: | Шестерня узла переноса изображения (20/121 зуб) |
Парткод: | 42062401 |
Цена: | 1 200 ₽ |
Деталь: | Узел датчика цвета, в сборе |
Парткод: | 43204101 |
Цена: | 6 700 ₽ |
Деталь: | Плоский кабель к узлу датчика цвета |
Парткод: | 2381028P0032 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (левая) |
Парткод: | 43214301 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (правая) |
Парткод: | 43214401 |
Цена: | 1 100 ₽ |
Деталь: | Ось подъёма |
Парткод: | 43207401 |
Цена: | 2 100 ₽ |
Деталь: | GEAR, 16T |
Парткод: | 42066701 |
Цена: | 850 ₽ |
Деталь: | Feed assembly, lower |
Парткод: | 43209301 |
Цена: | 6 200 ₽ |
Деталь: | Плоский кабель к плате высоковольтного питания |
Парткод: | 2381028P0034 |
Цена: | 1 000 ₽ |
Деталь: | FUSER FAN |
Парткод: | 43198901 |
Цена: | 2 600 ₽ |
Деталь: | Separator pad (M377, M477) |
Парткод: | 43197201 |
Цена: | 1 300 ₽ |
Деталь: | INTER. TRANSFER BELT ASSY |
Парткод: | 43378002 |
Цена: | 13 200 ₽ |
Деталь: | MOTOR MAIN |
Парткод: | 43195101 |
Цена: | 7 300 ₽ |
Деталь: | Toner sensor PCB assembly |
Парткод: | 43614901 |
Цена: | 3 300 ₽ |
Деталь: | Мотор привода подъёма |
Парткод: | 43353101 |
Цена: | 2 700 ₽ |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | 43208101 |
Цена: | 3 700 ₽ |
Деталь: | HVPS (T) PCA assembly (M553n) |
Парткод: | 43035201 |
Цена: | 11 000 ₽ |
Деталь: | Узел переключения питания (220В) |
Парткод: | 43505401 |
Цена: | 8 900 ₽ |
Деталь: | FIXING ASSEMBLY |
Парткод: | 43377003 |
Цена: | 10 300 ₽ |
Деталь: | PARTS COVER FRONT ASSY SP |
Парткод: | 43209201 |
Цена: | 3 500 ₽ |
Деталь: | COVER, REAR |
Парткод: | 43215201 |
Цена: | 3 000 ₽ |
Деталь: | Задняя откидная крышка (основание) |
Парткод: | 43215301 |
Цена: | 2 100 ₽ |
Деталь: | Задняя откидная крышка (выдвижная часть) |
Парткод: | 43215401 |
Цена: | 1 500 ₽ |
Деталь: | COVER, RIGHT |
Парткод: | 43215601 |
Цена: | 3 200 ₽ |
Деталь: | LEFT COVER ASSY |
Парткод: | 43215501 |
Цена: | 3 300 ₽ |
Деталь: | Передняя откидная крышка |
Парткод: | 43210701 |
Цена: | 2 700 ₽ |
Деталь: | Ролик захвата бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 42052601 |
Цена: | 1 400 ₽ |

Деталь: | Ролик подачи бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 43334801 |
Цена: | 800 ₽ |
Деталь: | Плоский кабель панели управления |
Парткод: | 2381028P0031 |
Цена: | 1 200 ₽ |
Деталь: | MOTOR HARNESS-DRIVE |
Парткод: | 43361601 |
Цена: | 1 400 ₽ |
Деталь: | Правая боковая пластина, в сборе |
Парткод: | 43194101 |
Цена: | 16 400 ₽ |
Деталь: | FRAME MAIN-LEFT, ML-2160,SEC |
Парткод: | 43200101 |
Цена: | 6 000 ₽ |
Деталь: | Inlet-cable assembly |
Парткод: | 43362201 |
Цена: | 3 500 ₽ |
Деталь: | Узел соединения |
Парткод: | 43361901 |
Цена: | 4 100 ₽ |
Деталь: | Шестерня узла переноса изображения (20/121 зуб) |
Парткод: | 42062401 |
Цена: | 1 200 ₽ |
Деталь: | Узел датчика цвета, в сборе |
Парткод: | 43204101 |
Цена: | 6 700 ₽ |
Деталь: | Плоский кабель к узлу датчика цвета |
Парткод: | 2381028P0032 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (левая) |
Парткод: | 43214301 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (правая) |
Парткод: | 43214401 |
Цена: | 1 100 ₽ |
Деталь: | Ось подъёма |
Парткод: | 43207401 |
Цена: | 2 100 ₽ |
Деталь: | GEAR, 16T |
Парткод: | 42066701 |
Цена: | 850 ₽ |
Деталь: | Feed assembly, lower |
Парткод: | 43209301 |
Цена: | 6 200 ₽ |
Деталь: | Плоский кабель к плате высоковольтного питания |
Парткод: | 2381028P0034 |
Цена: | 1 000 ₽ |
Деталь: | FUSER FAN |
Парткод: | 43198901 |
Цена: | 2 600 ₽ |
Деталь: | Separator pad (M377, M477) |
Парткод: | 43197201 |
Цена: | 1 300 ₽ |
Деталь: | INTER. TRANSFER BELT ASSY |
Парткод: | 43378002 |
Цена: | 13 200 ₽ |
Деталь: | MOTOR MAIN |
Парткод: | 43195101 |
Цена: | 7 300 ₽ |
Деталь: | Toner sensor PCB assembly |
Парткод: | 43614901 |
Цена: | 3 300 ₽ |
Деталь: | Мотор привода подъёма |
Парткод: | 43353101 |
Цена: | 2 700 ₽ |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | 43208101 |
Цена: | 3 700 ₽ |
Деталь: | HVPS (T) PCA assembly (M553n) |
Парткод: | 43035201 |
Цена: | 11 000 ₽ |
Деталь: | Узел переключения питания (220В) |
Парткод: | 43505401 |
Цена: | 8 900 ₽ |
Деталь: | FIXING ASSEMBLY |
Парткод: | 43377003 |
Цена: | 10 300 ₽ |
Деталь: | PARTS COVER FRONT ASSY SP |
Парткод: | 43209201 |
Цена: | 3 500 ₽ |
Деталь: | COVER, REAR |
Парткод: | 43215201 |
Цена: | 3 000 ₽ |
Деталь: | Задняя откидная крышка (основание) |
Парткод: | 43215301 |
Цена: | 2 100 ₽ |
Деталь: | Задняя откидная крышка (выдвижная часть) |
Парткод: | 43215401 |
Цена: | 1 500 ₽ |
Деталь: | COVER, RIGHT |
Парткод: | 43215601 |
Цена: | 3 200 ₽ |
Деталь: | LEFT COVER ASSY |
Парткод: | 43215501 |
Цена: | 3 300 ₽ |
Деталь: | Передняя откидная крышка |
Парткод: | 43210701 |
Цена: | 2 700 ₽ |
Деталь: | Подшипник |
Парткод: | 42060701 |
Цена: | 750 ₽ |
Деталь: | Светодиодная линейка |
Парткод: | 43295201 |
Цена: | 16 800 ₽ |
Деталь: | Ролик захвата бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 42052601 |
Цена: | 1 400 ₽ |

Деталь: | Ролик подачи бумаги из кассеты, в сборе (лоток 2) |
Парткод: | 43334801 |
Цена: | 800 ₽ |
Деталь: | Плоский кабель панели управления |
Парткод: | 2381028P0031 |
Цена: | 1 200 ₽ |
Деталь: | MOTOR HARNESS-DRIVE |
Парткод: | 43361601 |
Цена: | 1 400 ₽ |
Деталь: | Правая боковая пластина, в сборе |
Парткод: | 43194101 |
Цена: | 16 400 ₽ |
Деталь: | FRAME MAIN-LEFT, ML-2160,SEC |
Парткод: | 43200101 |
Цена: | 6 000 ₽ |
Деталь: | Inlet-cable assembly |
Парткод: | 43362201 |
Цена: | 3 500 ₽ |
Деталь: | Узел соединения |
Парткод: | 43361901 |
Цена: | 4 100 ₽ |
Деталь: | Шестерня узла переноса изображения (20/121 зуб) |
Парткод: | 42062401 |
Цена: | 1 200 ₽ |
Деталь: | Узел датчика цвета, в сборе |
Парткод: | 43204101 |
Цена: | 6 700 ₽ |
Деталь: | Плоский кабель к узлу датчика цвета |
Парткод: | 2381028P0032 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (левая) |
Парткод: | 43214301 |
Цена: | 1 100 ₽ |
Деталь: | Торсионная пружина (правая) |
Парткод: | 43214401 |
Цена: | 1 100 ₽ |
Деталь: | Ось подъёма |
Парткод: | 43207401 |
Цена: | 2 100 ₽ |
Деталь: | GEAR, 16T |
Парткод: | 42066701 |
Цена: | 850 ₽ |
Деталь: | Feed assembly, lower |
Парткод: | 43209301 |
Цена: | 6 200 ₽ |
Деталь: | Плоский кабель к плате высоковольтного питания |
Парткод: | 2381028P0034 |
Цена: | 1 000 ₽ |
Деталь: | FUSER FAN |
Парткод: | 43198901 |
Цена: | 2 600 ₽ |
Деталь: | Separator pad (M377, M477) |
Парткод: | 43197201 |
Цена: | 1 300 ₽ |
Деталь: | INTER. TRANSFER BELT ASSY |
Парткод: | 43378002 |
Цена: | 13 200 ₽ |
Деталь: | MOTOR MAIN |
Парткод: | 43195101 |
Цена: | 7 300 ₽ |
Деталь: | Toner sensor PCB assembly |
Парткод: | 43614901 |
Цена: | 3 300 ₽ |
Деталь: | Мотор привода подъёма |
Парткод: | 43353101 |
Цена: | 2 700 ₽ |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | 43208101 |
Цена: | 3 700 ₽ |
Деталь: | HVPS (T) PCA assembly (M553n) |
Парткод: | 43035201 |
Цена: | 11 000 ₽ |
Деталь: | Узел переключения питания (220В) |
Парткод: | 43505401 |
Цена: | 8 900 ₽ |
Деталь: | FIXING ASSEMBLY |
Парткод: | 43377003 |
Цена: | 10 300 ₽ |
Деталь: | PARTS COVER FRONT ASSY SP |
Парткод: | 43209201 |
Цена: | 3 500 ₽ |
Деталь: | COVER, REAR |
Парткод: | 43215201 |
Цена: | 3 000 ₽ |
Деталь: | Задняя откидная крышка (основание) |
Парткод: | 43215301 |
Цена: | 2 100 ₽ |
Деталь: | Задняя откидная крышка (выдвижная часть) |
Парткод: | 43215401 |
Цена: | 1 500 ₽ |
Деталь: | COVER, RIGHT |
Парткод: | 43215601 |
Цена: | 3 200 ₽ |
Деталь: | LEFT COVER ASSY |
Парткод: | 43215501 |
Цена: | 3 300 ₽ |
Деталь: | Передняя откидная крышка |
Парткод: | 43210701 |
Цена: | 2 700 ₽ |
Коды ошибок
001
002 ... 007
020
025
030
031
036
040
042, 043, 045
052
070
072
073
074, 075
081
104
106
120
121
122
123
124
126
127
131 ... 134
140
150 ... 153
154
155
160 ... 163
167
168
169
170, 171
172, 173
174
175
176, 177
190
200 ... 202
203 ... 214
209
230
231
240
901, 902
903, 904
923
Описание
Error code: | 001 |
Display: | Service Call 001: Error |
Description: | Leading edge of the recording paper fails to reach the Timing Sensor. (1st Cassette) |
Causes: | Recording paper jam. Timing Sensor abnormal. |
Remedy: | Is the error display reproducible? Power OFF/ON Replace CU PCB. (Must replace EEPROM) |
Error code: | 002 ... 007 |
Display: | Service Call Power off/on nnn: Fatal Error PC: nnnnnnnn LR: nnnnnnnn FR: nnnnnnnn 002: Error to 007: Error |
Description: | This stems from a variety of causes.For analyzing causes, record three numbers (called program counting value) indicated below LCD column and a printer firmware version. |
Causes: | Does this error message reappear? |
Remedy: | Record three digital numbers below LCD column. Restart with OFF/ON? Does an error occur in a particular print data? Is the error display reproducible? Is the error display reproducible? Is the error display reproducible? Notify three digital numbers below LCD column and F/W version. Check if it occurs depending on a print data. Request for print data investigation. Change RAM DIMM or ROM DIMM. Replace CU PCB. (Must replace EEPROM) Initialize EEPROM. Re-execute Network setup, such as user setup etc. for use. Change the printer. |
Error code: | 020 |
Display: | Service Call 020: Error |
Description: | CU ROM Hash Check Error 1 |
Causes: | Is program ROM DIMM set properly? Is error recovered by replacing program ROM DIMM? |
Remedy: | Reset program ROM DIMM. Replace program ROM DIMM. Replace TIG board. (Replace EEPROM) |
Error code: | 025 |
Display: | Service Call 025: Error |
Description: | CU Font ROM Hash Error1 Detected a Font Data hash check error. |
Causes: | Detected a Font ROM_DIMM hash check error. (Japan Model only) |
Remedy: | Detected a Font Data hash check error. (Japan Model only) Replace CU PCB. (Must replace EEPROM) |
Error code: | 030 |
Display: | Service Call 030: Error |
Description: | CU Slot1 DIMM RAM Check Error |
Causes: | Is subject RAM DIMM set properly? Is error recovered by replacing subject ROM DIMM? |
Remedy: | Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM) |
Error code: | 031 |
Display: | Service Call 031: Error |
Description: | CU Slot2 DIMM RAM Check Error |
Causes: | Is subject RAM DIMM set properly? Is error recovered by replacing subject ROM DIMM? |
Remedy: | Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM) |
Error code: | 036 |
Display: | Service Call 036: Error |
Description: | Slot2 RAM Spec Error. The CU RAM Slot2 DIMM specification is not supported. |
Causes: | Is RAM DIMM genuine? Is subject RAM DIMM gap setting proper? Is error recovered by replacing subject ROM DIMM? |
Remedy: | Use genuine RAM DIMM. Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM) |
Error code: | 040 |
Display: | Service Call 040: Error |
Description: | CU EEPROM Error |
Causes: | Is error recovered by replacing EEPROM on CU board? |
Remedy: | Replace EEPROM. (Recover user environment.) Replace TIG board. (Replace EEPROM) |
Error code: | 042, 043, 045 |
Display: | Contact the Service center. 042: Error~ 043: Error 045: Error |
Description: | Flash File System Error |
Remedy: | Failed to access to the Flash ROM that is directly soldered to the CU board. Turn off the power of the printer and back on. Replace the CU board. |
Error code: | 052 |
Display: | Power Off/on 052: Error |
Description: | Image Processor Driver Error |
Causes: | Does this error message reappear? |
Remedy: | Is the error display reproducible? Power OFF/ON Replace CU PCB. (Replace EEPROM) |
Error code: | 070 |
Display: | Service Call 070: Error |
Description: | CANT_HAPPEN PS firmware fault detected. |
Causes: | Confirm that error is recovered by turning power OFF/ON. |
Remedy: | Replace TIG board. (Replace EEPROM.) |
Error code: | 072 |
Display: | Service Call 072: Error |
Description: | Engine communication error I/F error between PU-CU. |
Causes: | Is CU assembly set properly? Is error recovered by replacing TIG board? |
Remedy: | Set properly. Replace TIG board. (Replace EEPROM.) Replace PU board. |
Error code: | 073 |
Display: | Reboot the printer. 073: Error xxxxxxxx |
Description: | Video Error Error is detected when expanding the video data. (Illegal data is received.) |
Remedy: | Is the CU assembly installed normally? Does this error recur? Re-install the CU assembly normally. Change the PC with another PC having high specifications, or alternately reduce resolution power and execute the print again. Replace the CU board. Replace the interface cable. Re-install the PC Printer driver. Is the CU assembly installed normally? Does this error recur? Does the error depend on print Data? Re-install the CU assembly normally. Execute the print again. Print any other data. Replace the CU board. Send the data to design division and request analysis of the data. |
Error code: | 074, 075 |
Display: | Reboot the printer. 074: Error xxxxxxxx 075: Error xxxxxxxx |
Description: | Video Error Error is detected when expanding the video data. |
Causes: | Is CU assembly set properly? |
Remedy: | Is the CU assembly installed correctly? Re-install the CU assembly normally. Replace the CU board. |
Error code: | 081 |
Display: | Service Call 081: Error |
Description: | Parameter Match Check Error |
Remedy: | Normal Read/Write not possible with EEPROM or Flash. If the condition does not change replace CU PCB. |
Error code: | 104 |
Display: | Service Call 104: Error |
Description: | Developer Motor Failure The Developer Motor rotation signal indicates that the motor is no longer operational. |
Causes: | • Developer Drive Assembly, PL8.1.1 • Engine Control Board, PL9.1.16 • Interlock Switch, PL9.1.11 • FAN/PHD/MOT Harness, PL10.1.9 |
Remedy: | 1 Check the Developer Drive Assembly for damage. Are any parts of the Developer Drive Assembly damaged or excessively worn? Replace the Developer Drive Assy. Go to Step 2. 2 Check the Developer Motor connection. Is P/J491 connected to the harness? Go to Step 3. Reconnect the Developer Motor. 3 Test the Developer Motor. 1. Close the Interlock Switch while testing. 2. Run the Service Diagnostics Developer Motor test. Does the motor operate? Go to Step 5. Go to Step 4. 4 Check for +24 V to the Developer Motor. Is the +24 V across P/J491-1 <=> P/J 481-5? Go to Step 6. Go to Step 5. 5 Test the Interlock Switch. Run the Service Diagnostics Interlock Switch test. Does the switch function correctly? Go to Step 6. Replace the Interlock Switch. 6 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J491. 2. Check continuity between J48 <=> J491. Replace the Engine Control Board. Replace the FAN/PHD/MOT Harness. |
Error code: | 106 |
Display: | Service Call 106: Error |
Description: | Motor Failure One of the primary drive motors has failed. |
Causes: | • Main Drive Assembly, PL8.1.2 • Developer Drive Assembly, PL8.1.1 • Fuser Drive Assembly, PL5.2.25 • Engine Control Board, PL9.1.16 • Interlock Switch, PL9.1.11 |
Remedy: | 1 Check the motors. Run the Service Diagnostics motor tests to determine the failed part. Is the failed part the Main Drive Motor? Go to. Test the Fuser Motor. 2 Is the failed part the Fuser Drive Motor? Go to. Test the Developer Motor. 3 Is the failed part the Developer Drive Motor? Go to. Replace the Engine Control Board. |
Error code: | 120 |
Display: | Service Call 120: Error |
Description: | Fuser Error |
Causes: | 1) Is fan in PU unit operating? 2) Error reoccurs after replacing fan motor. |
Remedy: | Wrong fuser lamp - hot roll - replace the fuser assembly. See “Fuser assembly” |
Error code: | 121 |
Display: | Service Call 121: Error |
Description: | Fuser Error |
Causes: | Is cable between PU board andhighvoltage power LSI connected properly? |
Remedy: | Wrong fuser lamp - BUR - replace the fuser assembly |
Error code: | 122 |
Display: | Service Call 122: Error |
Description: | Finisher Decurler Failure, Code 122 The level of the Decurler Cam Home Sensor did not change 4 seconds after the Decurler Cam Clutch has turned on. |
Causes: | • Decurler Cam Clutch • Stacker Motor • Finisher Control Board |
Remedy: | 1 1. Rotate the actuator while running the Decurler Cam Position test in diagnostics. 2. Does the value change between H and L? Go to step 2. Troubleshoot using the transmissive sensor procedure. 2 Does the decurler cam clutch operate in diagnostics? Check for a mechanical problem with the decurler cam clutch drive. If no problem is found replace the clutch. Go to step 3. 3 Is +24 VDC present at P/J 849-1? Replace the decurler cam clutch. Go to step 4. 4 Is +24 VDC present at test point 5 on the finisher control board? Replace the finisher control board. Troubleshoot the +24 VDC interlock circuit. 5 Is +24 VDC present at P/J 847-11 with the Finisher Stacker Motor Down test running in diagnostics? Replace the stacker motor. Replace the finisher control board |
Error code: | 123 |
Display: | Service Call 123: Error |
Description: | Finisher Set Clamp Failure, Code 123 The set clamp home sensor did not turn on within 2 seconds after the set clamp started operation. |
Causes: | • Set Clamp Solenoid • Finisher Control Board |
Remedy: | 1 1. Check the Set Clamp home sensor in diagnostics. 2. Does the value change from H to L while rotating the actuator? Go to step 2. Use the transmissive Sensor procedure to diagnose and repair the sensor. 2 Does the solenoid energize when running the Set Clamp Paddle test in diagnostics? Go to step 3. Go to step 4. 3 1. Run the Eject Forward Test and then the Eject Release Test in diagnostics. 2. Does the set clamp paddle turn once? Replace the finisher control board. Go to step 4. 4 Is +24 VDC present at P848A-10? Go to step 5. Go to step 6. 5 Is +24 VDC present at P848A-11? Replace the finisher control board. Replace the set clamp solenoid. 6 Is +24 VDC present at test point 9 on the finisher control board? Replace the finisher control board. Troubleshoot and repair the +24 VDC interlock circuit. |
Error code: | 124 |
Display: | Service Call 124: Error |
Description: | Finisher Communication Failure, Code 124 |
Remedy: | There are no diagnostic routines for problems involving serial communications. It is recommended that you address the following assemblies in this order: • Finisher Control Board • Engine Control Board • Perform continuity checks on any wiring harnesses involved. |
Error code: | 126 |
Display: | Turn power OFF and wait 126: Dew error |
Description: | Fuser Error |
Causes: | Sensor dew error detected. |
Remedy: | Fuser open thermistor hot roll |
Error code: | 127 |
Display: | Contact the Service center. 127: Error |
Description: | Fuser Error |
Causes: | • Scanner motor defective (motor lead connected incorrectly) • MCU board defective (scanner motor control unit) |
Remedy: | Fuser open thermistor BUR |
Error code: | 131 ... 134 |
Display: | Service Call 131: Y Head 132: M Head 133: C Head 134: K Head |
Description: | After turning ON the power or when cover is closed, the sensor detects that the unit is missing. |
Remedy: | 1) Is an Error message displayed? 2) Is the LED head properly mounted? 3) Does the Error take place again? Check the LED head unit. Turn ON power again. Replace the LED head Assy. |
Error code: | 140 |
Display: | SVC 140 ERROR |
Description: | Motor |
Remedy: | DC motor accel stall - staging - replace the Staging motor. If this does not fix the problem, replace the “System board” |
Error code: | 150 ... 153 |
Display: | Service Call 150: Y 151: M 152: C 153: K |
Description: | When a fuse could not be disconnected in the ID unit. |
Causes: | Is ID unit set properly? |
Remedy: | Check cable connections and replace engine board. |
Error code: | 154 |
Display: | Service Call 154: Error |
Description: | Jam at Registration Roller: Jam RR The Registration Sensor indicates that paper did not reach the sensor on time or that paper remains in the Registration Chute. |
Causes: | • Registration Sensor, PL4.1.3 • Registration Sensor Actuator, PL4.1.1 • Registration Roller Assembly, PL4.2.1 |
Remedy: | 1 Check the following for damage. • Registration Sensor Actuator, PL4.1.1 • Registration Roller Assembly, PL4.2.1 Is there any damage? Clean or replace as needed. Go to Step 2. 2 Test the Registration Sensor. Run the Service Diagnostics Registration Sensor test. Does the sensor function correctly? Go to Step 6. Go to Step 3. 3 Check the Registration Sensor connection. Is the Registration Sensor connected to the harness? Go to Step 4. Reconnect. 4 Check all pins on the REGISNS Harness PL 4.1.4 for continuity. 1. Disconnect P/J181 and P/J18. 2. Check continuity between J181 <=> J18. Go to Step 5. Replace the Registration Sensor Harness. 5 Check the Registration Sensor signal. Block the Registration Sensor. Verify the voltage between P/J18-3 <=> P/J18-2 on the Engine Control Board is 0 VDC. Go to Step 6. Replace the Registration Sensor. 6 Test the Registration Clutch. 1. Close the Interlock Switch while testing. 2. Run the Service Diagnostics Registration Clutch test. Does the clutch function correctly? Go to Step 8. Go to Step 7. 7 Check the Registration Clutch resistance. Disconnect connector P/J192. Is the resistance between J192-1 <=> J192-2 less than 200ƒ¶? Go to Step 8. Replace the Registration Clutch (Part of the Registration Roller Assembly) 8 Check for +24 V to the Registration Clutch. 1. Disconnect P/J192. 2. Close the Interlock Switch while testing. Is there +24 V across P192-3 <=> ground? Replace the Registration Chute. Replace the Engine Control Board. |
Error code: | 155 |
Display: | Service Call 155: Error |
Description: | Misfeed at Tray 1 (MPT): Jam T1 Paper fed from Tray 1 (MPT) did not reach the Registration Sensor on time. |
Causes: | • Feed Roller Assembly MPT, PL5.3.20 • Interlock Switch, PL9.1.11 • Registration Sensor, PL4.1.3 • Feed Solenoid, PL5.3.9 • Registration Roller Assembly, PL4.2.1 • Main Drive Assembly, PL8.1.2 |
Remedy: | 1 Check the following for evidence of fault or damage: • Feed Roller Assembly MPT, PL5.3.20 • Tray 1 (MPT) • Registration Sensor, PL4.1.3 • Main Drive Assembly, PL8.1.2 Remove any foreign objects or paper debris from the paper path. Is there any damage? Replace any damaged or excessively worn parts. Go to Step 2. 2 Test the Registration Sensor. Run the Service Diagnostics Registration Sensor test. Does the sensor function correctly? Go to Step 6. Go to Step 3. 3 Check the Registration Sensor connection. Is the Registration Sensor connected to the harness? Go to Step 4. Connect the sensor. 4 Check all pins of the REGISNR Harness PL4.1.4 for continuity. 1. Disconnect P/J181 and P/J18. 2. Check continuity between J181 <=> J18. Go to Step 5. Replace the Registration Sensor Harness. 5 Check the Registration Sensor signal. Block the Registration Sensor. Verify the voltage between P/J18-3 <=> P/J18-2 on the Engine Control Board is 0 VDC. Replace Registration Sensor. Go to Step 6. 6 If possible, print a Test Print from Tray 1 (MPT). Does the Main Motor function properly? Go to Step 16 Go to Step 7 7 Test the Main Drive Assembly. Run the Service Diagnostics Main Motor test. Does the Main Motor turn? Replace the Engine Control Board. Go to Step 8. 8 Check for +24 V to the Main Drive Motor 1. Disconnect P/J481. 2. Close the Interlock Switch while testing. Is there +24 V across J481-10 <=> J481-8? Go to Step 12. Go to Step 9. 9 Test the Interlock Switch. Run the Service Diagnostics Interlock Switch test. Does the Interlock Switch function correctly? Go to Step 11. Go to Step 10. 10 Check for +5 V to the Interlock Switch Disconnect P/J161. Is there +5 V across P161-1 <=> P161-2? Replace the LVPS. Replace the Interlock Switch. 11 Check FAN/PHD/MOT Harness continuity. 1. Disconnect P/J48 and P/J481. 2. Check continuity between J48 <=> J481 Replace Main Drive Motor Replace FAN/ PHD/MOT Harness. 12 Check Turn Roller function. 1. Perform Steps 1 ~ 3 on. 2. Open and close the front door. 3. Observe the Turn Roller. Does the Turn Roller turn while the machine is warming up? Go to Step 16. Go to Step 13. 13 Test the Turn Clutch. 1. Run the Service Diagnostics Tray 1 (MPT) Turn Clutch test. 2. Close the Interlock Switch while testing. Does the Turn Clutch function normally? Check that the Clutch doesn’t slip. Check the gears for damage. Go to Step 14. 14 Check for +24 V to the Turn Clutch. 1. Disconnect P/J191. 2. Close the Interlock Switch while testing. Is there +24 V across P191-2 <=> ground? Go to Step 15. Replace the Engine Control Board. 15 Check Turn Clutch resistance. Disconnect P/J191. Is the resistance between J191-1 <=> J191-2 less than 200Ω? Go to Step 16. Replace the Turn Clutch (Part of the Registration Roller Assembly). 16 If possible, print a Test print from Tray 1 (MPT). Check the Feed Gear operation. Does the gear function normally? Check for damage or obstructions in the paper path. Go to Step 17. 17 Test the Feed Solenoid. 1. Close the Interlock Switch while testing. 2. Run the Service Diagnostics Tray 1 (MPT) Feed Solenoid test. Does the Feed Solenoid function normally? Check that the Feed Solenoid spring and stopper disengage correctly. Go to Step 18. 18 Check all pins on the FRONT/DUP Harness PL5.3.28 for continuity. 1. Disconnect P/J132 and P/J13. 2. Check continuity between J13 <=> P132. Go to Step 19. Replace the FRONT/DUP Harness Assembly. 19 Check Feed Solenoid resistance. Disconnect connector P/J132. Is the resistance between J132-1 <=> J132-2 less than 100Ω? Replace the Engine Control Board. Replace the Feed Solenoid. |
Error code: | 160 ... 163 |
Display: | Service Call 160: Y Toner 161: M Toner 162: C Toner 163: K Toner |
Description: | Error detected by toner sensor. |
Causes: | 1) Is error message displayed? 2) Does error reoccur? |
Remedy: | Replace toner sensor or assembly (Y71-PWB). Same as above. |
Error code: | 167 |
Display: | Service Call 167: Error |
Description: | Motor |
Causes: | Is the error message displayed? Does this error recur? |
Remedy: | The incorrect configuration ID. See “Web oiler fuser kit installation” on page 4-88 to set configuration ID. |
Error code: | 168 |
Display: | Service Call 168: Error |
Description: | Motor |
Causes: | Is the error message displayed? Does this error recur? |
Remedy: | Unknown manufacture type - perform “Motor Detect” on page 3-18. If you do not find the problem after performing the test, call your next level support. |
Error code: | 169 |
Display: | Service Call 169: Error |
Description: | Motor |
Causes: | Is the error message displayed? Does this error recur? |
Remedy: | Mirror motor lock not achieved - black - go to “Printhead diagnostics” on page 3-1. Note: Do not adjust or replace any printhead before performing checks in “Printhead diagnostics” on page 3-1. |
Error code: | 170, 171 |
Display: | Contact the Service center. 170: Error 171: Error Note) |
Description: | Short-circuit or open-circuit of fuser thermistor is detected. |
Causes: | Does error reoccur? |
Remedy: | Does this error recur? Turn on the power again. Replace the fuser unit. |
Error code: | 172, 173 |
Display: | Contact the Service center. 172: Error 173: Error |
Description: | The fuser thermistor has detected an abnormal temperature (high temperature or low temperature.) |
Causes: | Does error reoccur? |
Remedy: | Turn on the power again. Does this error recur? Replace the fuser unit. Replace the low voltage power supply unit. |
Error code: | 174 |
Display: | Contact the Service center. 174: Error |
Description: | Motor |
Causes: | Does this error recur? |
Remedy: | Mirror motor lost lock - magenta - go to “Printhead diagnostics” on page 3-1. Note: Do not adjust or replace any printhead before performing checks in “Printhead diagnostics” on page 3-1. |
Error code: | 175 |
Display: | Contact the Service center. 175: Error Note) |
Description: | Motor |
Causes: | Does this error recur? |
Remedy: | Mirror motor lock not achieved - yellow - go to “Printhead diagnostics” on page 3-1. Note: Do not adjust or replace any printhead before performing checks in “Printhead diagnostics” on page 3-1. |
Error code: | 176, 177 |
Display: | Contact the Service center. 176: Error 177: Error |
Description: | The backup roller thermistor has detected an abnormal temperature (high temperature or low temperature.) |
Causes: | Does error reoccur? |
Remedy: | Does this error recur? Turn on the power again. Replace the fuser unit. Replace the low voltage power supply unit. |
Error code: | 190 |
Display: | Service Call 190: Error |
Description: | System Memory Overflow |
Remedy: | System Memory Overflow Power OFF/ON Replace CU PCB. (Replace EEPROM) |
Error code: | 200 ... 202 |
Display: | Service Call 200: Error to 202: Error |
Description: | PU Firm Download Error |
Causes: | Error occurred when downloading PU firmware. |
Remedy: | Error occurred when downloading PU firmware. After turning ON the power again, try downloading again. (This process isn’t executed for regular operations, therefore, will not occur) |
Error code: | 203 ... 214 |
Display: | Re-start the printer. 203: Error 204: Error 207: Error 208: Error 214: Error FOC: Error FFF: Error |
Description: | CU program error (The error numbers 203 through 214 do not occur under the normal operation.) |
Causes: | Invalid processing was performed with a CU program. |
Remedy: | Illegal processing is executed by the CU program. After turning off the power, check for the normal connection CU/ PU board. Then, turn on the power again. |
Error code: | 209 |
Display: | Power On/off 209: DOWNLOAD ERROR |
Description: | Custom Media Table Download Error Failed to download custom media table. |
Remedy: | Failed to download custom media table. After turning ON the power again, try downloading again. (This process isn’t executed for regular operations, therefore, will not occur) |
Error code: | 230 |
Display: | Service Call 230: Error |
Description: | Paper Jam Clear Paper Path Leave Job in Finisher area 5 |
Causes: | • Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB |
Remedy: | Primary: Paper has most likely jammed in the duplex option. Remove the duplex tray to access the jam. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, go to “230 Paper Jam” on page 2-74. |
Error code: | 231 |
Display: | Service Call 231: Error |
Description: | FGATE OFF error: Bk • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [K]. • The PFGATE ON signal still asserts when the next job starts. |
Causes: | • Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB |
Remedy: | 1. Check the connection between the controller board and the BCU. 2. Replace the BCU. 3. Replace the controller board. |
Error code: | 240 |
Display: | Service call 240: Error |
Description: | LD error |
Causes: | The IPU (EGB) detects a problem at the LD unit. |
Remedy: | • Worn-out LD • Disconnected or broken harness of the LD. 1. Replace the laser optics unit. |
Error code: | 901, 902 |
Display: | Power Off/On 901:Error 902:Error |
Description: | Short circuit (901) or open circuit (902) with the belt thermistor was detected. |
Causes: | Is belt thermistor cable setting proper? Does error reoccur? |
Remedy: | Check the belt thermistor wiring. (Is there any abnormal condition with the belt unit, contact substrate which is the tag terminal PCB of the printer unit, or the cable)? Yes Replace the part or the belt unit. No Replace the driver relay PCB. |
Error code: | 903, 904 |
Display: | Power Off/On 903:Error 904:Error |
Description: | The belt thermistor detected abnormal temperature. 903:too high 904:too low |
Causes: | Is belt thermistor cable setting proper? Does error reoccur? |
Remedy: | Check the belt thermistor wiring. (Is there any abnormal condition with the belt unit, contact substrate which is the tag terminal PCB of the printer unit, or the cable)? Yes Replace the part or the belt unit. No Replace the driver relay PCB. |
Error code: | 923 |
Display: | Power Off/on 923: Error |
Description: | Fuser Error |
Remedy: | Fuser is too hot during printing or when printer is idle. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
Парткод
Название
OKI Термоблок (печка) 220V
OKI Транспортный ремень
OKI (43459329) Тонер-картридж желтый повышенной емкости
OKI (43459330) Тонер-картридж пурпурный повышенной емкости
OKI (43459331) Тонер-картридж голубой повышенной емкости
OKI (43459332) Тонер-картридж черный повышенной емкости
OKI (43459433) Тонер-картридж желтый
OKI (43459434) Тонер-картридж пурпурный
OKI (43459435) Тонер-картридж голубой
OKI (43459436) Тонер-картридж черный
OKI Фотобарабан желтый
OKI Фотобарабан пурпурный
OKI Фотобарабан голубой
OKI Фотобарабан черный