OKI C841dn

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

светодиодная

Макс. формат

Число страниц в месяц

75000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Число страниц в месяц	75 000
Факс
Сканер
Копир
Печать фотографий
Телефон
Размещение	настольный
Область применения	средний офис
Макс. формат	A3
Технология печати	светодиодная
Тип устройства	Принтер
Цветность печати	цветная
Тип	лазерный/светодиодный
Принтер
Количество цветов	4
Система непрерывной подачи чернил
Пигментные чернила
Печать без полей
Двусторонняя печать
Прямая печать
Время разогрева	32
Макс, разрешение для ч/б печати
По Y	1 200
По X	1 200
Скорость ч/б печати
A4	35
A3	20
Время выхода первого отпечатка
Цветн,	9,5
Ч/б	9,5
Сканер
Стандарт TWAIN
Слайд-адаптер
Отправка изображения по e-mail
Стандарт WIA
Расходные материалы
Количество картриджей	4
Ресурс ч/б картриджа/тонера	10 000
Ресурс цветного картриджа/тонера	10 000
Ресурс фотобарабана	30 000
Печать на:
Матовой бумаге
Пленках
Этикетках
Карточках
Глянцевой бумаге
Конвертах
Фотобумаге
Рулоне
CD/DVD
Плотность бумаги
Максимальная	220
Минимальная	64
Факс
Цветной
PC Fax
Телефон
Беспроводная трубка
Спикерфон
Стандарт DECT
Автоответчик
Caller ID
АОН
Проводная трубка
Шрифты и языки управления
Языки управления
PostScript
PostScript 3
PDF
PCL 6
PCL 5c
PostScript 2
PPDS
PCL 5e
Количество установленных шрифтов
PCL	87
PostScript	80
Лотки
Емкость лотка ручной подачи	100
Подача бумаги
Стандартная	400
Максимальная	1 990
Вывод бумаги
Стандартный	350
Финишер
Электронная сортировка
Степлер
Сортировка со сдвигом
Брошюровщик
Сортер
Интерфейсы
Версия USB	2,0
Wi-Fi 802.11n
Устройство для чтения карт памяти
FireWire (IEEE 1394)
Wi-Fi
Bluetooth
AirPrint
Инфракрасный порт
RS-232
LPT
Веб-интерфейс
USB
Ethernet (RJ-45)
Память/Процессор
Частота процессора	800
Макс, объем памяти	768
Объем памяти	256
Дополнительная информация
Работа от аккумулятора
Экран
Поддержка ОС
Linux
DOS
Mac OS
Windows
Потребляемая мощность
При работе	1 400
В режиме ожидания	100
Уровень шума
В режиме ожидания	32
При работе	52
Габариты
Ширина	449
Глубина	552
Вес	40
Высота	360

Модули

Plate-Assy-Side-R

Printer

Printer-Unit

Cover Assy.-Front

Cover Assy.-Top

Frame-Assy

Frame Assy.-Front

Plate-Assy-Side-L

Детали Cover Assy.-Front

Деталь:	CASSETTE ASSY.
Парткод:	44710601

Деталь:	Spring-Head
Парткод:	43618501

Деталь:	LV-Pow-Assy
Парткод:	44734801

Деталь:	OR-Board-DHV
Парткод:	44838001

Деталь:	maintenance board
Парткод:	44861002

Деталь:	Belt-Assy.-
Парткод:	44735901

Деталь:	Frame Assy.-OP-Panel
Парткод:	44806702

Деталь:	Cover-Side-R-Sub
Парткод:	44680201

Деталь:	Plate-Shield-Accesse
Парткод:	44908501

Деталь:	Duplex Unit-
Парткод:	44717602

Деталь:	LED Head Unit-53TRG
Парткод:	44811401

Деталь:	LED Head Unit-63TRG
Парткод:	44811601

Деталь:	Frame Assy.-Front
Парткод:	44730901

Деталь:	Frame-Assy-Contact
Парткод:	44817901

Деталь:	Gear Assy.-Hopping
Парткод:	44725901

Деталь:	Gear Assy.-ID-Liftup
Парткод:	44726401

Деталь:	Gear-Liftup-C
Парткод:	44696201

Деталь:	Gear-Liftup-D
Парткод:	44819801

Деталь:	Sensor-Assy.-Regist
Парткод:	44817201

Деталь:	Roller Assy.-Regist
Парткод:	44726701

Деталь:	Guide Assy.-Eject
Парткод:	44726901

Деталь:	CONN Cord-JST4P-JST4P
Парткод:	44743001

Деталь:	Clutch-Hop
Парткод:	44690201

Деталь:	Holder-SNS-Assy
Парткод:	44725601

Деталь:	Roller-Feed-NOW
Парткод:	43000601

Деталь:	Roller-Pick-Up
Парткод:	42699401

Деталь:	Gear-Feed
Парткод:	43346601

Деталь:	FFC-HVOLT-Bend
Парткод:	44907401

Деталь:	OR-Board Assy. -P6Z
Парткод:	44886701

Деталь:	FFC-Relay-Bend
Парткод:	44907101

Деталь:	FFC-RCR-Bend
Парткод:	44907201

Деталь:	FFC-LCR-Bend
Парткод:	44907301

Деталь:	CONN Cord-JST8P-JST8P
Парткод:	44654801

Коды ошибок

001

002 ... 007

009

010

011

020

023

030

031

036

040

042, 043, 045

049

052

067

068

069

070

072

073

075

077

081

104

106

111

112

113

114

121

122

123

124

126

127

128

131 ... 134

142

154

155

160 ... 163

166

167

168

169

170, 171

172, 173

174, 175

176, 177

181 ... 184

190

200 ... 202

203, 204

207, 208

209

213, 214

230

231

232

250

251

254

257

901, 902

903, 904

918

923

928

931

933

934

935

941

942

943

944

945

980

982

983

984

985

986

987

999

F0C, FOD

FFE

FFF

Описание

Парткод

Название

OKI Блок фотобарабана желтый

OKI Блок фотобарабана пурпурный

OKI Блок фотобарабана голубой

OKI Блок фотобарабана черный

OKI (44844517) Тонер-картридж желтый

OKI (44844518) Тонер-картридж пурпурный

OKI (44844519) Тонер-картридж голубой

OKI (44844520) Тонер-картридж черный

OKI Ремень переноса

OKI Термоблок (печка)

Деталь:	Cover Assy.-Top(1200dpi)
Парткод:	44727802

Деталь:	Cable-Assy.-Head(1200dpi)
Парткод:	44729102

Error code:	001
Display:	Service Call 001: Error
Description:	Leading edge of the recording paper fails to reach the Timing Sensor. (1st Cassette)
Causes:	Recording paper jam. Timing Sensor abnormal.
Remedy:	Is the error display reproducible? Power OFF/ON Replace CU PCB. (Must replace EEPROM)

Error code:	009
Display:	Power Off/On 009: Error PC: nnnnnnnn LR: nnnnnnnn FR: nnnnnnnn
Description:	CPU unexpected exception
Remedy:	Does this error message reappear? Yes Cycle the power. Replace the CU/ PU board.

Error code:	010
Display:	Power Off/On 010: Error PC: nnnnnnnn LR: nnnnnnnn FR: nnnnnnnn
Description:	No recording paper.
Causes:	No recording paper or paper is not set properly. No Paper Sensor is defective.
Remedy:	Does this error message reappear? Yes Cycle the power. Replace the CU/ PU board.

Error code:	011
Display:	Power Off/On 011: Error PC: nnnnnnnn LR: nnnnnnnn FR: nnnnnnnn
Description:	Paper Cassette is not installed properly.
Remedy:	Does this error message reappear? Yes Cycle the power. Replace the CU/ PU board.

Error code:	020
Display:	Service Call 020: Error
Description:	CU ROM Hash Check Error 1
Causes:	Is program ROM DIMM set properly? Is error recovered by replacing program ROM DIMM?
Remedy:	Reset program ROM DIMM. Replace program ROM DIMM. Replace TIG board. (Replace EEPROM)

Error code:	023
Display:	Service call 023: Error
Description:	CU Font ROM Hash error
Causes:	Does error display reappear?
Remedy:	Does this error message reappear? Yes Cycle the power. Replace the CU/ PU board.

Error code:	030
Display:	Service Call 030: Error
Description:	CU Slot1 DIMM RAM Check Error
Causes:	Is subject RAM DIMM set properly? Is error recovered by replacing subject ROM DIMM?
Remedy:	Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM)

Error code:	031
Display:	Service Call 031: Error
Description:	CU Slot2 DIMM RAM Check Error
Causes:	Is subject RAM DIMM set properly? Is error recovered by replacing subject ROM DIMM?
Remedy:	Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM)

Деталь:	Motor Assy.-Belt
Парткод:	44724801

Деталь:	Motor Assy.-ID
Парткод:	44805201

Деталь:	Plate Assy.-Tonner
Парткод:	44725101

Деталь:	Rack-R
Парткод:	44688601

Error code:	036
Display:	Service Call 036: Error
Description:	Slot2 RAM Spec Error. The CU RAM Slot2 DIMM specification is not supported.
Causes:	Is RAM DIMM genuine? Is subject RAM DIMM gap setting proper? Is error recovered by replacing subject ROM DIMM?
Remedy:	Use genuine RAM DIMM. Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM)

Error code:	040
Display:	Service Call 040: Error
Description:	CU EEPROM Error
Causes:	Is error recovered by replacing EEPROM on CU board?
Remedy:	Replace EEPROM. (Recover user environment.) Replace TIG board. (Replace EEPROM)

Error code:	049
Display:	Service Call 049: Error
Description:	CU type mismatch CU ROM does not match with the device.
Causes:	Is proper program ROM set?
Remedy:	Replace program ROM DIMM. Replace with proper program ROM DIMM.

Error code:	052
Display:	Power Off/on 052: Error
Description:	Image Processor Driver Error
Causes:	Does this error message reappear?
Remedy:	Is the error display reproducible? Power OFF/ON Replace CU PCB. (Replace EEPROM)

Error code:	067
Display:	Service Call 067:Error
Description:	A communication error was detected during communication with the Sleep Mode interface monitoring program.
Causes:	Does this error recur?
Remedy:	A communication error was detected during communication with the Sleep Mode interface monitoring program. If power cycling does not solve the problem, maintenance by a service engineer is required.

Error code:	068
Display:	Service call 068: Error
Description:	Rear Cover is open.
Causes:	1. Cover is not firmly closed. 2. Connectors are not firmly connected.
Remedy:	Does this error recur after power restoration? Yes Program writing by service personnel.

Error code:	069
Display:	Service Call 069:Error
Description:	Malfunction of the NIC chip was detected.
Causes:	Does this error recur?
Remedy:	Does this error recur? Yes Power OFF/ON. Replace the printer control PCB.

Error code:	070
Display:	Service Call 070: Error
Description:	CANT_HAPPEN PS firmware fault detected.
Causes:	Confirm that error is recovered by turning power OFF/ON.
Remedy:	Replace TIG board. (Replace EEPROM.)

Error code:	072
Display:	Service Call 072: Error
Description:	Engine communication error I/F error between PU-CU.
Causes:	Is CU assembly set properly? Is error recovered by replacing TIG board?
Remedy:	Set properly. Replace TIG board. (Replace EEPROM.) Replace PU board.

Error code:	073
Display:	Reboot the printer. 073: Error xxxxxxxx
Description:	Video Error Error is detected when expanding the video data. (Illegal data is received.)
Remedy:	Is the CU assembly installed normally? Does this error recur? Re-install the CU assembly normally. Change the PC with another PC having high specifications, or alternately reduce resolution power and execute the print again. Replace the CU board. Replace the interface cable. Re-install the PC Printer driver. Is the CU assembly installed normally? Does this error recur? Does the error depend on print Data? Re-install the CU assembly normally. Execute the print again. Print any other data. Replace the CU board. Send the data to design division and request analysis of the data.

OKI C841dn

Общие характеристики

Число страниц в месяц

Факс

Сканер

Копир

Печать фотографий

Телефон

Размещение

Область применения

Макс. формат

Технология печати

Тип устройства

Цветность печати

Тип

Принтер

Количество цветов

Система непрерывной подачи чернил

Пигментные чернила

Печать без полей

Двусторонняя печать

Прямая печать

Время разогрева

Макс, разрешение для ч/б печати

Скорость ч/б печати

Время выхода первого отпечатка

Сканер

Стандарт TWAIN

Слайд-адаптер

Отправка изображения по e-mail

Стандарт WIA

Расходные материалы

Количество картриджей

Ресурс ч/б картриджа/тонера

Ресурс цветного картриджа/тонера

Ресурс фотобарабана

Печать на:

Плотность бумаги

Факс

Цветной

PC Fax

Телефон

Беспроводная трубка

Спикерфон

Стандарт DECT

Автоответчик

Caller ID

АОН

Проводная трубка

Шрифты и языки управления

Языки управления

Количество установленных шрифтов

Лотки

Емкость лотка ручной подачи

Подача бумаги

Вывод бумаги

Финишер

Электронная сортировка

Степлер

Сортировка со сдвигом

Брошюровщик

Сортер

Интерфейсы

Версия USB

Wi-Fi 802.11n

Устройство для чтения карт памяти

FireWire (IEEE 1394)

Wi-Fi

Bluetooth

AirPrint

Инфракрасный порт

RS-232

LPT

Веб-интерфейс

USB

Ethernet (RJ-45)

Память/Процессор

Частота процессора

Макс, объем памяти

Объем памяти

Error code:	075
Display:	Power off/on 075: Error
Description:	An error was detected during image data expansion.
Causes:	Is the CU/PU installed properly?
Remedy:	Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Error code:	077
Display:	Power Off/On 077:Error xx
Description:	Detected of abnormal condition during image data expansion
Causes:	Does this error recur?
Remedy:	Does this recur? Yes Power OFF/ON. Replace the printer control PCB

Error code:	081
Display:	Service Call 081: Error
Description:	Parameter Match Check Error
Remedy:	Normal Read/Write not possible with EEPROM or Flash. If the condition does not change replace CU PCB.

Error code:	104
Display:	Service Call 104: Error
Description:	Developer Motor Failure The Developer Motor rotation signal indicates that the motor is no longer operational.
Causes:	• Developer Drive Assembly, PL8.1.1 • Engine Control Board, PL9.1.16 • Interlock Switch, PL9.1.11 • FAN/PHD/MOT Harness, PL10.1.9
Remedy:	1 Check the Developer Drive Assembly for damage. Are any parts of the Developer Drive Assembly damaged or excessively worn? Replace the Developer Drive Assy. Go to Step 2. 2 Check the Developer Motor connection. Is P/J491 connected to the harness? Go to Step 3. Reconnect the Developer Motor. 3 Test the Developer Motor. 1. Close the Interlock Switch while testing. 2. Run the Service Diagnostics Developer Motor test. Does the motor operate? Go to Step 5. Go to Step 4. 4 Check for +24 V to the Developer Motor. Is the +24 V across P/J491-1 <=> P/J 481-5? Go to Step 6. Go to Step 5. 5 Test the Interlock Switch. Run the Service Diagnostics Interlock Switch test. Does the switch function correctly? Go to Step 6. Replace the Interlock Switch. 6 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J491. 2. Check continuity between J48 <=> J491. Replace the Engine Control Board. Replace the FAN/PHD/MOT Harness.

Error code:	106
Display:	Service Call 106: Error
Description:	Motor Failure One of the primary drive motors has failed.
Causes:	• Main Drive Assembly, PL8.1.2 • Developer Drive Assembly, PL8.1.1 • Fuser Drive Assembly, PL5.2.25 • Engine Control Board, PL9.1.16 • Interlock Switch, PL9.1.11
Remedy:	1 Check the motors. Run the Service Diagnostics motor tests to determine the failed part. Is the failed part the Main Drive Motor? Go to. Test the Fuser Motor. 2 Is the failed part the Fuser Drive Motor? Go to. Test the Developer Motor. 3 Is the failed part the Developer Drive Motor? Go to. Replace the Engine Control Board.

Error code:	111
Display:	SVC 111 ERROR
Description:	Printhead Error
Causes:	Incorrect color DTM installation, incorrect PCU installation, development bias error, MCU, LD control malfunction, loss of synchronization
Remedy:	No first Hysnc - magenta Check for the correct installation of all the cables to the system board assembly and to the printhead assembly; J11 and J12 on the system board. Go to “System board”. If the cables are connected correctly to the system board and to the printhead assembly, go to “Printhead diagnostics”

Error code:	112
Display:	SVC 112 ERROR
Description:	Printhead Error
Causes:	Incorrect color DTM installation, incorrect PCU installation, development bias error, MCU, LD control malfunction, loss of synchronization
Remedy:	No first Hysnc - yellow Check for the correct installation of all the cables to the system board assembly and to the printhead assembly; J7 and J8 on the system board. Go to “System board”. If the cables are connected correctly to the system board and to the printhead assembly, go to “Printhead diagnostics”. Note: Do not adjust or replace any printhead before performing checks in “Printhead diagnostics”

Error code:	113
Display:	SVC 113 ERROR
Description:	Finisher Stapler Failure, Code 113 The staple home sensor doesn’t turn ON within 2 seconds after the stapler motor started to turn backwards.
Causes:	• Finisher Control Board • Staple Unit Assembly
Remedy:	1 1. Enter service diagnostics. 2. Run the Stapler Home sensor test. 3. Does the value change from H to L when the stapler is moved away from the home position? Go to step 6. Go to step 2. 2 1. Measure the voltage between finisher board connector P852-2 and frame ground. 2. Does the voltage change between 0 and +5 VDC when the sensor is blocked and unblocked? Replace the finisher control board. Go to step 3. 3 1. Measure the voltage at the Finisher Board connector P852-1. 2. Dose the voltage measure +5 VDC? The home sensor or the wiring is bad. Replace the staple unit assembly. Go to step 4. 4 1. Disconnect the Stapler Unit Assembly. 2. Measure the voltage between the finisher board connector P852-1 and frame ground. 3. Does the voltage measure +5 VDC? Replace the stapler unit assembly. Go to step 5. 5 Is +24 VDC present at either J847-7 or J847-9? Replace the finisher control board. Troubleshoot and repair the +24 VDC interlock circuit. 6 1. Enter service diagnostics and run the “Stapler Close Motor” test. 2. Does the stapler motor operate correctly? Replace the finisher control board. Go to step 7. 7 With the Stapler Close Motor test running is +24 VDC present at J847-7? Replace in the following order: • stapler head assembly • finisher control board Troubleshoot and repair the +24 VDC interlock circuit.

Error code:	114
Display:	Service Call 114:Error
Description:	Front Tamper Home Sensor Failure, Code 114 With the Front Tamper Home Sensor OFF the Front Tamper Home Sensor did not turn ON within 800 ms after the move to the Front Tamper Home position has begun. With the Front Tamper Home Sensor on the Front Tamper Sensor did not turn Off when the Front Tamper Home Sensor is deactuated.
Causes:	• Front Tamper Motor • Finisher Control Board
Remedy:	1 1. Run the Front Tamper Low Front or Front Tamper Low Rear test in diagnostics. 2. Does the front tamper guide operate? Go to step 6. Go to step 2. 2 Does the front tamper motor operate? Check the tampering mechanism for a mechanical problem. Go to step 3. 3 1. Check pins J877 A pins 1,3,4 and 6. 2. Is +24 VDC present on any of the pins? Go to step 4. Go to step 5. 4 1. Check the following wires for and open circuit or short circuit to ground. Is any wire open or shorted? J877A-1 to J848B-7 J877A-3 to J848B-9 J877A-4 to J848B-10 J877A-6 to J848B-12 Repair or replace the wiring harness. Replace in order until resolved: • front tamper motor • finisher control board 5 Is +24 VDC present on pins J848B-8 and J848B-11 on the finisher control board? Replace the finisher control board. Troubleshoot and repair the +24 VDC interlock circuit. 6 1. Check the tamper front home sensor in diagnostics. 2. Does the value change from H to L when the tamper is moved away from the home position? Replace the finisher control board. Repair the sensor using the Transmissive Sensor troubleshooting procedure.

Error code:	121
Display:	Service Call 121: Error
Description:	Fuser Error
Causes:	Is cable between PU board andhighvoltage power LSI connected properly?
Remedy:	Wrong fuser lamp - BUR - replace the fuser assembly