Ricoh Aficio 480W
Рейтинг
Модули
PAPER EXIT SECTION 2
PAPER REGISTRATION 1
DEVELOPMENT UNIT 2
FRAME SECTION 2
Paper Tray Unit 5
Paper Tray Unit 3
OPTICAL SECTION 3
Paper Tray Unit 1
FUSING UNIT 1
Charge Corona Section
FRAME SECTION 1
OPTICAL SECTION 4
OPTICAL SECTION 2
ELECTRICAL SECTION 1
OPERATION PANEL
EXTERIOR 1
PCU
Paper Tray Unit 6
ELECTRICAL SECTION 2
Paper Tray Unit 4
Paper Tray Unit 7
EXTERIOR 2
Development Unit 3
PAPER EXIT SECTION 1
Optical Section 1
DRIVE SECTION
FUSING UNIT 3
PAPER REGISTRATION 2
Plotter Section
Optical Section 5
DEVELOPMENT UNIT 1
FUSING UNIT 2
Paper Tray Unit 2
Детали Plotter Section
| Деталь: | Ground Wire:Paper Exit Unit |
| Парткод: | B188 4461 |
| Деталь: | Lower Support Guide |
| Парткод: | A163 4465 |
| Деталь: | Guide Plate:Exit:Entrance:Lower |
| Парткод: | B188 4456 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0110 |
| Деталь: | Harness:DC:Paper Exit Unit |
| Парткод: | B188 5882 |
| Деталь: | DC Solenoid:Gate Pawl:Unit |
| Парткод: | B188 4385 |
| Деталь: | Gate Pawl Plate |
| Парткод: | B010 4458 |
| Деталь: | Transport Exit Guide |
| Парткод: | B010 4467 |
| Деталь: | Exit Separation Pawl |
| Парткод: | AF02 5029 |
| Деталь: | BUSHING - 6MM |
| Парткод: | 50 530 447 |
| Деталь: | Gate Pawl Drive |
| Парткод: | A174 4372 |
| Деталь: | Spring:Pressure Release |
| Парткод: | AA06 6366 |
| Деталь: | Guide Plate:Exit:Sub-unit |
| Парткод: | B188 4459 |
| Деталь: | ANTISTATIC BRUSH |
| Парткод: | A681 2416 |
| Деталь: | Magnet Catch:44.1n |
| Парткод: | AG07 0504 |
| Деталь: | Spring Plate:Exit Roller:Lower |
| Парткод: | B188 4454 |
| Деталь: | Lower Spring Plate - Exit Roller |
| Парткод: | B010 4454 |
| Деталь: | DRIVEN EXIT ROLLER |
| Парткод: | AF04 0576 |
| Деталь: | Decal:Warning (High Temperature) |
| Парткод: | B188 4476 |
| Деталь: | Upper Spring Plate - Exit Roller |
| Парткод: | B010 4453 |
| Деталь: | Exit cover |
| Парткод: | B010 4452 |
| Деталь: | Side Fence:Left:Unit |
| Парткод: | B188 2618 |
| Деталь: | Side Fence:Right:Unit |
| Парткод: | B188 2588 |
| Деталь: | Magnetic:Side Fence |
| Парткод: | B010 2617 |
| Деталь: | Guide Plate:Manual Feed:Lower |
| Парткод: | B188 2603 |
| Деталь: | Guide Plate:Manual Feed:Lower:NA |
| Парткод: | B188 2604 |
| Деталь: | GUIDE PLATE |
| Парткод: | A174 3861 |
| Деталь: | Guide Plate:Middle |
| Парткод: | B188 2572 |
| Деталь: | Connectiong Guide |
| Парткод: | B010 2566 |
| Деталь: | Guide Plate:Lower |
| Парткод: | B188 2562 |
| Деталь: | End Manual Feed Sheet |
| Парткод: | A163 2612 |
| Деталь: | Middle Manual Feed Sheet |
| Парткод: | A163 2610 |
| Деталь: | Registration Roller |
| Парткод: | AF02 0613 |
| Деталь: | Bracket: Latch: Left |
| Парткод: | B188 1111 |
| Деталь: | Photointerruptor:Lg248nl1 |
| Парткод: | GW02 0020 |
| Деталь: | Spring:Lever:Lock |
| Парткод: | AA06 0968 |
| Деталь: | Bracket:Coupling:Development |
| Парткод: | B1881158 |
| Деталь: | Gear - 12Z/28Z |
| Парткод: | AB01 7529 |
| Деталь: | Development Shaft |
| Парткод: | AA14 8602 |
| Деталь: | Gear - 28Z |
| Парткод: | B0101143 |
| Деталь: | Gear Pulley:17z/50t |
| Парткод: | AB01 7694 |
| Деталь: | Spacer - 8x12x0.5 |
| Парткод: | AA13 2111 |
| Деталь: | Idler Gear - 52z |
| Парткод: | AB01 1414 |
| Деталь: | REGISTRATION CLUTCH |
| Парткод: | AX21 0091 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Stopper:Magnetic Clutch |
| Парткод: | B1881144 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Tightener |
| Парткод: | G020 4444 |
| Деталь: | Screw: M4 |
| Парткод: | AA14 3545 |
| Деталь: | Tightener:Drive:Development |
| Парткод: | B1881160 |
| Деталь: | Spring:Pressure Release |
| Парткод: | AA06 0969 |
| Деталь: | Anchor:Cassette Sensor |
| Парткод: | AA14 3546 |
| Деталь: | Power Pack:TD |
| Парткод: | B188 5730 |
| Деталь: | Harness:High Voltage:Transfer |
| Парткод: | B188 5771 |
| Деталь: | Harness:High Voltage:Separation |
| Парткод: | B188 5780 |
| Деталь: | Bracket:Torque Limiter |
| Парткод: | B188 2848 |
| Деталь: | Cover:Key Counter |
| Парткод: | B1881273 |
| Деталь: | Plate Nut:Key Counter |
| Парткод: | B1881286 |
| Деталь: | TORQUE LIMITER |
| Парткод: | A222 2680 |
| Деталь: | Bracket:Key Counter |
| Парткод: | B1881272 |
| Деталь: | Bracket:Latch:Right |
| Парткод: | B188 1110 |
| Деталь: | Decal:Power Source:Off:NA |
| Парткод: | B0701357 |
| Деталь: | Guard:Collar:Brake |
| Парткод: | B188 2742 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Vacuum Drive Shaft |
| Парткод: | AA14 8603 |
| Деталь: | Gear - 16Z |
| Парткод: | AB01 3683 |
| Деталь: | Gear - 22Z |
| Парткод: | AB01 3681 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Exhaust Large Duct:Unit |
| Парткод: | B188 3975 |
| Деталь: | Harness :AC:Drum:Heater |
| Парткод: | B188 5781 |
| Деталь: | Heater: 120 V: 13W |
| Парткод: | AX40 0188 |
| Деталь: | Heater:230V:13W |
| Парткод: | AX40 0189 |
| Деталь: | Bracket:Positioning:T/S Corona:Right |
| Парткод: | B188 3859 |
| Деталь: | Bracket:Positioning:T/S Corona:Left |
| Парткод: | B188 3861 |
| Деталь: | Right Sheet - Side Plate |
| Парткод: | B010 2827 |
| Деталь: | Ozone Filter Case |
| Парткод: | B010 3982 |
| Деталь: | OZONE FILTER |
| Парткод: | B188 3985 |
| Деталь: | T/S Corona Unit |
| Парткод: | B188 3920 |
| Деталь: | End Block Cover - T & S |
| Парткод: | AD02 2320 |
| Деталь: | Corona Wire - Separation |
| Парткод: | AD02 0072 |
| Деталь: | Wire Cushion |
| Парткод: | A165 2058 |
| Деталь: | Corona Wire - Main |
| Парткод: | AD02 0059 |
| Деталь: | Corona Wire Spring |
| Парткод: | AA06 6254 |
| Деталь: | Left End Block - T & S |
| Парткод: | AD02 2319 |
| Деталь: | Right End Block - T & S |
| Парткод: | AD02 2318 |
| Деталь: | Left Paper Guide - T/S Outer |
| Парткод: | A174 3938 |
| Деталь: | Guide:Paper:T/S Corona:Middle:Left |
| Парткод: | A174 3932 |
| Деталь: | Guide:Paper:T/S Corona:Middle:Right |
| Парткод: | A174 3931 |
| Деталь: | Right Paper Guide - T/S Outer |
| Парткод: | A174 3937 |
| Деталь: | Sheet:Entrance:Transfer:Unit |
| Парткод: | B188 3855 |
| Деталь: | Hexagonal Bolt:M12x80 |
| Парткод: | AA14 3547 |
| Деталь: | Caster: 1470n |
| Парткод: | AH01 2031 |
| Деталь: | Flanged Hexagonal Head Bolt:M5x14 |
| Парткод: | B1881125 |
| Деталь: | Paper End Sensor |
| Парткод: | AW01 0121 |
| Деталь: | Harness:DC:Paper End Sensor |
| Парткод: | B188 5886 |
| Деталь: | Bracket:Paper End Sensor |
| Парткод: | B188 2814 |
| Деталь: | Harness:AC:Leak Breaker |
| Парткод: | B188 5768 |
| Деталь: | Bracket:Leak Breaker |
| Парткод: | B188 5983 |
| Деталь: | PCB:SDB |
| Парткод: | B188 6118 |
| Деталь: | Shadeing Plate:Motor Control Board |
| Парткод: | B188 6124 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3076 |
| Деталь: | Pin:Guide Plate:Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Stud - M4 |
| Парткод: | 59 183 120 |
| Деталь: | Guide Plate:Connecting:Upper |
| Парткод: | B188 2768 |
| Деталь: | BUSHING - 6MM |
| Парткод: | AA08 0037 |
| Деталь: | Spring:Middle:Pressure |
| Парткод: | AA06 0975 |
| Деталь: | Paper Feed Roller - Middle |
| Парткод: | AF02 0108 |
| Деталь: | Bracket:Paper Feed Sensor |
| Парткод: | B188 2798 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0110 |
| Деталь: | Harness:Paper End Sensor |
| Парткод: | B188 5786 |
| Деталь: | Front Base |
| Парткод: | B010 2756 |
| Деталь: | Guide:Feed Roller:Exit |
| Парткод: | B188 2865 |
| Деталь: | Paper Feed Roller - Side |
| Парткод: | AF02 0109 |
| Деталь: | Spring - Exit |
| Парткод: | AA06 6368 |
| Деталь: | Gasket:Guide Plate:Upper Front |
| Парткод: | B188 6196 |
| Деталь: | Cover:Drive:Front Left |
| Парткод: | B188 2786 |
| Деталь: | CUTTER UNIT |
| Парткод: | B188 2923 |
| Деталь: | Screw:Spring Washer:M2.6x5 |
| Парткод: | A571 7700 |
| Деталь: | Micro Switch:Dolphin:Assy |
| Парткод: | B188 2844 |
| Деталь: | DC Motor:DC24V 7.18W |
| Парткод: | B188 2854 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Drive Gear - 27z |
| Парткод: | AB01 1413 |
| Деталь: | Exhaust Drive Roller |
| Парткод: | AF02 0525 |
| Деталь: | Harness:DC:Upper Paper Feed |
| Парткод: | B188 5832 |
| Деталь: | Decal - Paper Size |
| Парткод: | B010 2826 |
| Деталь: | Decal - Paper Size Indication |
| Парткод: | B010 2846 |
| Деталь: | Guide Plate:Photo Refiection Sensor |
| Парткод: | B188 2724 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0111 |
| Деталь: | Roller Guide Plate |
| Парткод: | B010 2726 |
| Деталь: | Bracket:Rocker Switch |
| Парткод: | B188 2820 |
| Деталь: | Bracket:Connector:T ray |
| Парткод: | B188 2950 |
| Деталь: | Harness:Upper Paper Feed |
| Парткод: | B188 5767 |
| Деталь: | Heater: 120 V: 13W |
| Парткод: | AX40 0188 |
| Деталь: | Heater:230V:13W |
| Парткод: | AX40 0189 |
| Деталь: | Stud - M4 |
| Парткод: | 59 183 120 |
| Деталь: | Holder:Paper Holder:Middle |
| Парткод: | B641 2794 |
| Деталь: | Decal:Cutter:Caution Chart:EXP |
| Парткод: | AA00 0646 |
| Деталь: | Guide Plate:Rear Upper |
| Парткод: | B188 6197 |
| Деталь: | Cushion - 5x20x1mm |
| Парткод: | AA16 1033 |
| Деталь: | Driven Roller Holder |
| Парткод: | A174 4741 |
| Деталь: | SPRING HOLDER |
| Парткод: | A174 4687 |
| Деталь: | Compression Spring - Driven Roller |
| Парткод: | AA06 3639 |
| Деталь: | Lower Shaft - Driven Roller |
| Парткод: | AA14 0727 |
| Деталь: | PRESSURE SPRING |
| Парткод: | AA06 0506 |
| Деталь: | DRIVEN ROLLER |
| Парткод: | AF02 2089 |
| Деталь: | Original Driven Roller |
| Парткод: | B010 6190 |
| Деталь: | Driven Roller Sleeve |
| Парткод: | B010 6189 |
| Деталь: | Gasket:Guide Plate:Rear Upper:Rear |
| Парткод: | B188 6200 |
| Деталь: | Exit Roller Pad |
| Парткод: | A296 6363 |
| Деталь: | DRIVEN EXIT ROLLER |
| Парткод: | A296 6366 |
| Деталь: | Exit Roller Spring Plate |
| Парткод: | A296 6364 |
| Деталь: | Exit Roller Pad |
| Парткод: | A296 6373 |
| Деталь: | EXIT ROLLER |
| Парткод: | A296 6372 |
| Деталь: | Spring Plate - Exit Roller |
| Парткод: | A296 6365 |
| Деталь: | Supporting Plate:Driven Roller |
| Парткод: | B188 6201 |
| Деталь: | Shadeing Plate:Stay:Rear Upper |
| Парткод: | B188 6159 |
| Деталь: | Contact Image Sensor:A0 |
| Парткод: | B1881650 |
| Деталь: | Gasket:Side Plate:Exit |
| Парткод: | B188 6253 |
| Деталь: | Gasket:Cis:Rear Lower |
| Парткод: | B188 6167 |
| Деталь: | Exposure Glass:CIS |
| Парткод: | B0101651 |
| Деталь: | Cover:Front |
| Парткод: | B188 2930 |
| Деталь: | Bracket:Cover:Lower |
| Парткод: | B188 2929 |
| Деталь: | Stopper:Left:Upper Paper Feed |
| Парткод: | B188 2759 |
| Деталь: | Bushing - 10x18 |
| Парткод: | AA08 0049 |
| Деталь: | Stud - M4 |
| Парткод: | 59 183 120 |
| Деталь: | Slide Rail:Left:Unit |
| Парткод: | B188 2936 |
| Деталь: | Slide Rail:Right:Unit |
| Парткод: | B188 2938 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3718 |
| Деталь: | Harness Clamp - FCW-52 |
| Парткод: | B010 2947 |
| Деталь: | Positioning Pin |
| Парткод: | B010 2916 |
| Деталь: | Compression Spring - Tray Release |
| Парткод: | AA06 3612 |
| Деталь: | Bracket:Pin |
| Парткод: | B188 2979 |
| Деталь: | Stopper:Right:Upper Paper Feed |
| Парткод: | B188 2760 |
| Деталь: | Fusing Unit:NA |
| Парткод: | B188 4051 |
| Деталь: | Fusing Unit:EU |
| Парткод: | B188 4052 |
| Деталь: | Cover:Heater:Left |
| Парткод: | B188 4286 |
| Деталь: | Cover:Heater: Right |
| Парткод: | B188 4285 |
| Деталь: | Bracket: Heater: Left |
| Парткод: | B188 4112 |
| Деталь: | Bracket: Heater: Right |
| Парткод: | B188 4111 |
| Деталь: | Fusing Lamp Supporter |
| Парткод: | A023 4096 |
| Деталь: | External Circlip |
| Парткод: | B010 4104 |
| Деталь: | BUSHING |
| Парткод: | AE03 1052 |
| Деталь: | Gear -30Z |
| Парткод: | AB01 4177 |
| Деталь: | Harness :AC:Fusing:Heater:NA |
| Парткод: | B188 5762 |
| Деталь: | Harness :AC:Fusing:Heater:EU |
| Парткод: | B188 5763 |
| Деталь: | Thermostat:199C 250V/10A |
| Парткод: | AW11 0035 |
| Деталь: | Housing:Thermostat |
| Парткод: | B188 4085 |
| Деталь: | Thermostat:200C 250V/10A |
| Парткод: | AW11 0036 |
| Деталь: | Fusing Thermistor |
| Парткод: | AW10 0057 |
| Деталь: | Stay:Front:Fusing:Unit |
| Парткод: | B188 4116 |
| Деталь: | Heater: 120 V: 1300W |
| Парткод: | AX45 0045 |
| Деталь: | Heater:230V:700W |
| Парткод: | AX44 0209 |
| Деталь: | Heater: 120V:300W |
| Парткод: | AX43 0110 |
| Деталь: | Hot Roller |
| Парткод: | AE01 1055 |
| Деталь: | Screw: M4:DIA6x1.7:Black |
| Парткод: | AA14 3543 |
| Деталь: | Lever:Cleaning Roller:Left |
| Парткод: | B188 4167 |
| Деталь: | BUSHING - 6MM |
| Парткод: | 50 530 447 |
| Деталь: | Fusing Cleaning Roller |
| Парткод: | AE04 2047 |
| Деталь: | Roller Clutch - 6x14x10 |
| Парткод: | AA08 3016 |
| Деталь: | Screw:M3:DIA4x5.6 |
| Парткод: | AA14 3542 |
| Деталь: | Heat Insulation:Fusing:Rear |
| Парткод: | AA17 2017 |
| Деталь: | Gear - 40Z |
| Парткод: | AB01 0352 |
| Деталь: | Gear - 48Z |
| Парткод: | AB01 0346 |
| Деталь: | Bracket:Motor:Right:Unit |
| Парткод: | B188 4128 |
| Деталь: | Stepper Motor:DC24V 4.8W |
| Парткод: | B188 4137 |
| Деталь: | Bracket:Photointerruptor:Right |
| Парткод: | B188 4144 |
| Деталь: | LED Sensor Type S |
| Парткод: | 52 055 250 |
| Деталь: | PRESSURE SHAFT |
| Парткод: | B0104139 |
| Деталь: | Bracket:Anchor:Pressure |
| Парткод: | B1884136 |
| Деталь: | Spring:Fusing:Cleaning Blade |
| Парткод: | AA06 0966 |
| Деталь: | BUSHING |
| Парткод: | AA08 2062 |
| Деталь: | Discharge Brush:Fusing |
| Парткод: | AA12 0127 |
| Деталь: | Lever:Cleaning Roller:Right |
| Парткод: | B188 4166 |
| Деталь: | Cover:Thermostat |
| Парткод: | B188 4086 |
| Деталь: | Left Holder - Charge Corona |
| Парткод: | B010 2062 |
| Деталь: | Right Holder - Charge Corona |
| Парткод: | B010 2061 |
| Деталь: | Screw Shaft Joint |
| Парткод: | B010 2065 |
| Деталь: | CHARGE CORONA UNIT |
| Парткод: | B188 2074 |
| Деталь: | End Block:Charge Corona:Left |
| Парткод: | AD02 2374 |
| Деталь: | Left Grid Terminal |
| Парткод: | A163 2052 |
| Деталь: | Left End Block Cover - Charge |
| Парткод: | AD02 2317 |
| Деталь: | SPRING |
| Парткод: | AA06 0749 |
| Деталь: | Rubber Damper |
| Парткод: | A174 2065 |
| Деталь: | Charge Corona Wire - G |
| Парткод: | AD02 0089 |
| Деталь: | Grid Wire |
| Парткод: | AD02 0090 |
| Деталь: | Spring:Corona Wire:Charge |
| Парткод: | AA06 0965 |
| Деталь: | Cahage Corona Casing |
| Парткод: | B010 2069 |
| Деталь: | Charge Corona Shield |
| Парткод: | B010 2057 |
| Деталь: | Screw Shaft |
| Парткод: | B010 2053 |
| Деталь: | Charge Corona Slider |
| Парткод: | A174 2052 |
| Деталь: | Cleaner:Charge Corona:Unit |
| Парткод: | A174 2053 |
| Деталь: | End Block:Charge Corona:Right |
| Парткод: | AD02 2376 |
| Деталь: | Right Grid Terminal |
| Парткод: | B010 2052 |
| Деталь: | End Block Cover - Charge Corona |
| Парткод: | AD02 2369 |
| Деталь: | Adjus Plate:Front Rear:LED Head |
| Парткод: | B188 1961 |
| Деталь: | Screw:6x1.7 |
| Парткод: | AA14 3802 |
| Деталь: | LED Array:QL:Assy |
| Парткод: | B188 2016 |
| Деталь: | Spring Plate - Charge Corona |
| Парткод: | B010 2055 |
| Деталь: | Discharge Lamp Casing |
| Парткод: | B010 2011 |
| Деталь: | Earth Spring Plate |
| Парткод: | B010 2056 |
| Деталь: | Pin:Guide Plate:Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Shielding Plate |
| Парткод: | B0101294 |
| Деталь: | Shielding Plate - Charge Corona |
| Парткод: | B010 2015 |
| Деталь: | Guide Plate:Stopper Pawl |
| Парткод: | B1881107 |
| Деталь: | Stopper Pawl:Lock:Left |
| Парткод: | B188 1101 |
| Деталь: | Stopper Pawl Lever |
| Парткод: | B010 1106 |
| Деталь: | Spring:Pressure Release |
| Парткод: | AA06 0969 |
| Деталь: | Guide Plate:Hinge:Left |
| Парткод: | B1881096 |
| Деталь: | Hinge pin |
| Парткод: | AA14 5821 |
| Деталь: | Left Hinge Bracket |
| Парткод: | B1881094 |
| Деталь: | Upper Shaft - Gas Spring |
| Парткод: | AA14 8606 |
| Деталь: | Gas Spring:325n |
| Парткод: | B1881122 |
| Деталь: | Bracket:Gas Spring:Left Lower |
| Парткод: | B188 1118 |
| Деталь: | Coller - 8.5x13.5x11.5 |
| Парткод: | AA132185 |
| Деталь: | Supporting Plate:Side Plate:Rear |
| Парткод: | B1881083 |
| Деталь: | Bracket:Fix:Fusing Unit:Left |
| Парткод: | B188 1115 |
| Деталь: | Bracket:Fix:Fusing Unit:Right |
| Парткод: | B188 1114 |
| Деталь: | Bracket:Gas Spring:Right Lower |
| Парткод: | B188 1117 |
| Деталь: | Right Hinge Bracket |
| Парткод: | B1881093 |
| Деталь: | Guide Plate:Hinge:Right |
| Парткод: | B1881095 |
| Деталь: | Bracket:Cover |
| Парткод: | B188 1252 |
| Деталь: | Right Lock Stopper |
| Парткод: | B188 1100 |
| Деталь: | Bracket:Power Pack |
| Парткод: | B188 5973 |
| Деталь: | INNER COVER ASSY |
| Парткод: | B0101361 |
| Деталь: | PUSH SWITCH |
| Парткод: | G020 5626 |
| Деталь: | Harness:DC:Paper Exit Unit:Set Sensor |
| Парткод: | B188 5837 |
| Деталь: | Guide:Plate:Front |
| Парткод: | B188 4467 |
| Деталь: | Guide:Exhaust:Plate |
| Парткод: | B188 4463 |
| Деталь: | Cover:Micro Switch:Exit |
| Парткод: | B188 4462 |
| Деталь: | Bracket:Micro Switch |
| Парткод: | B188 6115 |
| Деталь: | Lower Shaft - Lock Side Plate |
| Парткод: | AA14 3765 |
| Деталь: | PIN |
| Парткод: | 54101291 |
| Деталь: | Cover:Scanner:Lower Front |
| Парткод: | B188 6351 |
| Деталь: | Guide Plate:Lower Front:NA |
| Парткод: | B188 6456 |
| Деталь: | Guide Plate:Lower Front (EU) |
| Парткод: | B188 6056 |
| Деталь: | Lower Front Sheet - Guide Plate |
| Парткод: | B010 6137 |
| Деталь: | Guide Plate:Lower Rear |
| Парткод: | B188 6096 |
| Деталь: | Gasket:Guide Plate:Rear Lower |
| Парткод: | B188 6199 |
| Деталь: | Exposure Sheet |
| Парткод: | A296 6112 |
| Деталь: | Plate:Guide:Exhaust |
| Парткод: | B188 4464 |
| Деталь: | Harness:DC:Scanner:Safety Switch:Connecti |
| Парткод: | B188 5844 |
| Деталь: | Film:Cover:Original Table:Lower |
| Парткод: | B1881396 |
| Деталь: | Ground Plate:Operation Sub-unit |
| Парткод: | B1881464 |
| Деталь: | Bracket:Paper Size Sensor:Left |
| Парткод: | B188 6059 |
| Деталь: | Bracket:Positioning Sensor:Left:NA |
| Парткод: | B188 6472 |
| Деталь: | Bracket:Paper Size Sensor:Right |
| Парткод: | B188 6171 |
| Деталь: | Bracket:Positioning Sensor:Right:NA |
| Парткод: | B188 6471 |
| Деталь: | Photo Refiection Sensor:Ps117ed1 |
| Парткод: | AW01 0109 |
| Деталь: | Driven Roller Holder |
| Парткод: | A174 4741 |
| Деталь: | SPRING HOLDER |
| Парткод: | A174 4687 |
| Деталь: | Compression Spring - Driven Roller |
| Парткод: | AA06 3639 |
| Деталь: | Lower Shaft - Driven Roller |
| Парткод: | AA14 0727 |
| Деталь: | PRESSURE SPRING |
| Парткод: | AA06 0506 |
| Деталь: | DRIVEN ROLLER |
| Парткод: | AF02 2089 |
| Деталь: | Original Driven Roller |
| Парткод: | B010 6190 |
| Деталь: | Driven Roller Sleeve |
| Парткод: | B010 6189 |
| Деталь: | Gasket:Guide Plate:Upper Front |
| Парткод: | B188 6196 |
| Деталь: | Lever:Un Lock |
| Парткод: | B188 6163 |
| Деталь: | Bushing - 10mm |
| Парткод: | 50 530 419 |
| Деталь: | Spring:Lock |
| Парткод: | AA06 6360 |
| Деталь: | Hook:Lever |
| Парткод: | B188 6172 |
| Деталь: | Lock Shaft |
| Парткод: | AA14 0738 |
| Деталь: | Shadeing Plate:Stay:Upper Front |
| Парткод: | B188 6158 |
| Деталь: | Coupled Gear - 30/30z |
| Парткод: | AB01 7383 |
| Деталь: | Bracket:Coupling |
| Парткод: | B188 6254 |
| Деталь: | Timing Belt - 207P3M6 |
| Парткод: | AA04 3913 |
| Деталь: | COUPLING SPRING |
| Парткод: | AA06 6349 |
| Деталь: | Coupling Shaft |
| Парткод: | AA14 3764 |
| Деталь: | Bracket:Stopper:Hook |
| Парткод: | B188 6174 |
| Деталь: | Harness:DC:Operation:Ground Wire |
| Парткод: | B188 5843 |
| Деталь: | Sheet:Ground Plate:Operation Sub-unit |
| Парткод: | B1881465 |
| Деталь: | Insulating Sheet:IPUT:IOB |
| Парткод: | B188 5987 |
| Деталь: | PCB:BCU |
| Парткод: | B188 5046 |
| Деталь: | Cover:BCU |
| Парткод: | B188 5981 |
| Деталь: | PCB:IOB |
| Парткод: | B188 5130 |
| Деталь: | Harness:IOB-CIS |
| Парткод: | B188 5855 |
| Деталь: | Harness:DC:Scanner:NA |
| Парткод: | B188 5875 |
| Деталь: | Harness:DC:Scanner:EU |
| Парткод: | B188 5862 |
| Деталь: | Harness:DC:Machine or Copier:Left |
| Парткод: | B188 5836 |
| Деталь: | Harness:DC:Machine Or Copier:Right |
| Парткод: | B188 5835 |
| Деталь: | Decal - Ground |
| Парткод: | AA001190 |
| Деталь: | Harness Clamp - FCW-52 |
| Парткод: | B010 2947 |
| Деталь: | Insulating Sheet:Cover:Power Supply Unit |
| Парткод: | B188 5985 |
| Деталь: | Power Supply Cord:Stopper:NA |
| Парткод: | B188 5745 |
| Деталь: | Power Supply Cord:Stopper:EU |
| Парткод: | B188 5746 |
| Деталь: | Power Supply Unit:359W:AC100-120V |
| Парткод: | B188 5708 |
| Деталь: | Power Supply Unit:359W:AC220-240V |
| Парткод: | B188 5728 |
| Деталь: | Harness:DC:IOB-PSU |
| Парткод: | B188 5850 |
| Деталь: | Cover:Power Supply Unit |
| Парткод: | B188 5976 |
| Деталь: | Supporting Plate:Power Supply Unit |
| Парткод: | B188 5993 |
| Деталь: | Bracket:Power Supply Cord:EXP |
| Парткод: | B188 5984 |
| Деталь: | Gasket: 13x13x145 |
| Парткод: | B1881394 |
| Деталь: | Gasket:4x13x145 |
| Парткод: | B1881395 |
| Деталь: | Fan:Dol-c2:Power Supply Unit |
| Парткод: | B188 5709 |
| Деталь: | Operation Sub-unit:NA |
| Парткод: | B188 1414 |
| Деталь: | Operation Sub-unit:EU |
| Парткод: | B188 1415 |
| Деталь: | Sheet - Touch Panel |
| Парткод: | B065 1457 |
| Деталь: | Touch Panel:HVGA |
| Парткод: | B180 5258 |
| Деталь: | LCD:Sub-unit |
| Парткод: | B1881429 |
| Деталь: | Cap - Application |
| Парткод: | B065 1448 |
| Деталь: | Keytop - Counter |
| Парткод: | B065 1447 |
| Деталь: | Keytop - 10key |
| Парткод: | B065 1440 |
| Деталь: | Keytop - Function |
| Парткод: | B065 1446 |
| Деталь: | Keytop - Reset Switch |
| Парткод: | B065 1439 |
| Деталь: | Keytop - Clear/Stop |
| Парткод: | B065 1442 |
| Деталь: | Keytop - Start |
| Парткод: | B065 1441 |
| Деталь: | Keytop - Sample Print |
| Парткод: | B065 1443 |
| Деталь: | PCB:Operation Sub-unit:Left |
| Парткод: | B1881423 |
| Деталь: | PCB:Operation Sub-unit:Right |
| Парткод: | B1881422 |
| Деталь: | PCB:LCDC:NA |
| Парткод: | B188 5085 |
| Деталь: | PCB:LCDC:EU |
| Парткод: | B188 5086 |
| Деталь: | Ground Wire:Scanner |
| Парткод: | B188 5851 |
| Деталь: | Keytop Display - LT |
| Парткод: | B065 1461 |
| Деталь: | Keytop Display - A4 |
| Парткод: | B065 1463 |
| Деталь: | Keytop Aprication - LT |
| Парткод: | B065 1460 |
| Деталь: | Keytop Application - A4 |
| Парткод: | B065 1462 |
| Деталь: | Lens - Application |
| Парткод: | B065 1451 |
| Деталь: | Sheet - Right Operation |
| Парткод: | B065 1454 |
| Деталь: | Sheet - Left Operation |
| Парткод: | B065 1456 |
| Деталь: | Cover:Original:Upper |
| Парткод: | B1881304 |
| Деталь: | Keytop Cover - Original Interrupt |
| Парткод: | B0101305 |
| Деталь: | Decal:Rear Upper T ray Guide |
| Парткод: | B188 1361 |
| Деталь: | Decal - Main Power |
| Парткод: | B010 1332 |
| Деталь: | Decal-main Power |
| Парткод: | B0101333 |
| Деталь: | Decal-scanner Stop |
| Парткод: | B0101334 |
| Деталь: | LED GUIDE |
| Парткод: | A229 1465 |
| Деталь: | Keytop - Power Source |
| Парткод: | B0101459 |
| Деталь: | PCB:Operation Sub-unit:Power Source |
| Парткод: | B188 5290 |
| Деталь: | Keytop - Entrance |
| Парткод: | AA11 4121 |
| Деталь: | PCB:Scanner Stop |
| Парткод: | B188 5515 |
| Деталь: | Original Cover - Upper Front |
| Парткод: | B0101303 |
| Деталь: | Original Left Cover |
| Парткод: | B0101301 |
| Деталь: | Original Right Cover |
| Парткод: | B0101302 |
| Деталь: | Original Left Plate |
| Парткод: | B0101321 |
| Деталь: | Original Right Plate |
| Парткод: | B0101322 |
| Деталь: | Decal-original Misfed |
| Парткод: | B010 6491 |
| Деталь: | Original Table:Printing |
| Парткод: | B188 6063 |
| Деталь: | Original Table:Printing:NA |
| Парткод: | B188 6453 |
| Деталь: | Side Fence:Original:Left:Unit |
| Парткод: | B188 6073 |
| Деталь: | Side Fence:Original:Right:Unit |
| Парткод: | B188 6066 |
| Деталь: | Spring Plate - Side Fence Guide |
| Парткод: | B010 6072 |
| Деталь: | Channel:Original Table |
| Парткод: | B188 6064 |
| Деталь: | Rivet: MM5 |
| Парткод: | B1881463 |
| Деталь: | Film:Cover:Original Table:Behind |
| Парткод: | B1881397 |
| Деталь: | Pulley :103t |
| Парткод: | AB03 0777 |
| Деталь: | Holder:Ball Bearing |
| Парткод: | B188 2253 |
| Деталь: | Balancer:OPC Drum |
| Парткод: | B125 2472 |
| Деталь: | DRUM |
| Парткод: | B010 9510 |
| Деталь: | Shaft:Drum:Assy |
| Парткод: | AD01 5040 |
| Деталь: | Drum Flange |
| Парткод: | AD01 4030 |
| Деталь: | PRESSURE SPRING |
| Парткод: | AA06 3276 |
| Деталь: | Spacer:Compression Spring:Drum |
| Парткод: | B188 2255 |
| Деталь: | Drum Knob |
| Парткод: | A163 2251 |
| Деталь: | CLEANING BLADE |
| Парткод: | A165 3581 |
| Деталь: | Toner Collection Coil |
| Парткод: | AD04 3088 |
| Деталь: | Cleaning Casing |
| Парткод: | B010 3565 |
| Деталь: | Drum Right Shield |
| Парткод: | AA153135 |
| Деталь: | Blade Left Shield |
| Парткод: | AA153134 |
| Деталь: | Blade Right Shield |
| Парткод: | AA153133 |
| Деталь: | Idler Gear - 30z |
| Парткод: | AB011209 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Transmission Gear - 18z |
| Парткод: | AB01 1210 |
| Деталь: | Snap Ring |
| Парткод: | 52 062 686 |
| Деталь: | Stopper:Ball Bearing |
| Парткод: | B188 2256 |
| Деталь: | Rear Shutter Pin |
| Парткод: | AA14 3335 |
| Деталь: | Side Plate:Left |
| Парткод: | B188 3556 |
| Деталь: | Right side plate |
| Парткод: | B010 3552 |
| Деталь: | SHUTTER SPRING |
| Парткод: | AA06 3346 |
| Деталь: | Shutter - Discharge Waste Toner |
| Парткод: | B010 3629 |
| Деталь: | Harness:DC:Separation Unit |
| Парткод: | B188 5884 |
| Деталь: | Density Sensor:P |
| Парткод: | B213 2367 |
| Деталь: | Guide Plate:Density Sensor |
| Парткод: | B188 3581 |
| Деталь: | Left Pressure Lever |
| Парткод: | A163 3608 |
| Деталь: | Right Pressure Lever |
| Парткод: | A163 3607 |
| Деталь: | LEVER SHAFT |
| Парткод: | A163 3609 |
| Деталь: | Cleaning Blade Spring |
| Парткод: | AA06 2253 |
| Деталь: | Film - Toner End Sensor Harnes |
| Парткод: | G012 3897 |
| Деталь: | DC Solenoid:Pickoff Pawl |
| Парткод: | AX10 0032 |
| Деталь: | Casing:Pickoff Pawl:Welding |
| Парткод: | B188 3569 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | 54 471 778 |
| Деталь: | Spring:Tightener |
| Парткод: | AA06 0981 |
| Деталь: | Release Plate:Left |
| Парткод: | B188 2718 |
| Деталь: | Guide:Release Plate |
| Парткод: | B188 2735 |
| Деталь: | Holder:Roller |
| Парткод: | B188 2726 |
| Деталь: | Stud - M4 |
| Парткод: | 59 183 120 |
| Деталь: | Release Plate:Right |
| Парткод: | B188 2719 |
| Деталь: | Guide Plate:Upper Front |
| Парткод: | B188 2720 |
| Деталь: | Decal:Cutter:Caution Chart:EXP |
| Парткод: | AA00 0646 |
| Деталь: | Guide Plate:Upper:Peen |
| Парткод: | B188 2740 |
| Деталь: | Gear:32Z |
| Парткод: | AB01 2040 |
| Деталь: | Lever Stopper Shaft |
| Парткод: | AA14 3347 |
| Деталь: | Bushing - Dia4 |
| Парткод: | AA08 2135 |
| Деталь: | Transport Driven Roller |
| Парткод: | AF02 2128 |
| Деталь: | Spring - Exit |
| Парткод: | AA06 6368 |
| Деталь: | Spring:Coating Bar:Pressure |
| Парткод: | AA06 0970 |
| Деталь: | Guide Plate:Lower Front |
| Парткод: | B188 2715 |
| Деталь: | Snap Ring - M6 |
| Парткод: | 52 152 621 |
| Деталь: | Drive Gear - 27z |
| Парткод: | AB01 1413 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Gear - 57Z |
| Парткод: | B0391192 |
| Деталь: | Guide Plate:Connecting:Front |
| Парткод: | B188 2772 |
| Деталь: | Roller:Connecting:Drive |
| Парткод: | B188 2736 |
| Деталь: | Grounding Plate - Upper Rear |
| Парткод: | A267 1089 |
| Деталь: | Gasket:3x5x170 |
| Парткод: | B1881364 |
| Деталь: | Total Counter:7FIG:24V |
| Парткод: | AX31 0045 |
| Деталь: | Hexagonal Head Bolt:6-32UNCX4 |
| Парткод: | AA14 3551 |
| Деталь: | Bracket:HDD |
| Парткод: | B188 5978 |
| Деталь: | Inner Cover:Rear Lower:Left |
| Парткод: | B1881253 |
| Деталь: | Rubber Cushion |
| Парткод: | AA16 1125 |
| Деталь: | Screw:M3x4.2 |
| Парткод: | AA14 3796 |
| Деталь: | HDD:EXP:2pcs/set |
| Парткод: | B188 5301 |
| Деталь: | GUIDE PLATE |
| Парткод: | B188 2954 |
| Деталь: | Cable:Connector |
| Парткод: | B188 2958 |
| Деталь: | Safety Switch - FA1L-AA20 |
| Парткод: | AW50 0029 |
| Деталь: | Harness:AC:Machine Or Copier:NA |
| Парткод: | B188 5782 |
| Деталь: | Harness:AC:Machine Or Copier:EU |
| Парткод: | B188 5783 |
| Деталь: | Connector bracket |
| Парткод: | B010 2956 |
| Деталь: | Spring:Connector |
| Парткод: | AA06 0976 |
| Деталь: | Pin - Lever - Paper Spool Unit |
| Парткод: | AA14 3253 |
| Деталь: | Harness:DC:Power Source:HDD |
| Парткод: | B188 5838 |
| Деталь: | Cover:HDD |
| Парткод: | B188 5979 |
| Деталь: | Decal:Connector:HDD |
| Парткод: | B188 5302 |
| Деталь: | Cover:GW |
| Парткод: | B188 5977 |
| Деталь: | Interface Panel Assy |
| Парткод: | B070 6893 |
| Деталь: | Gasket: 1x10x40 |
| Парткод: | B1881375 |
| Деталь: | Panel:SD-Card |
| Парткод: | B188 5982 |
| Деталь: | PCB:MLB3 |
| Парткод: | B188 5711 |
| Деталь: | PCB:MB |
| Парткод: | B188 5240 |
| Деталь: | Cover:Image Processing Unit:EXP |
| Парткод: | B188 5988 |
| Деталь: | PCB:N-PI:Assy |
| Парткод: | B188 5731 |
| Деталь: | PCB:Type-BZ |
| Парткод: | B188 5743 |
| Деталь: | Right Rail |
| Парткод: | B070 5670 |
| Деталь: | Left Rail |
| Парткод: | B070 5671 |
| Деталь: | Right Guide 1 |
| Парткод: | G1085108 |
| Деталь: | Left Guide 1 |
| Парткод: | G1085107 |
| Деталь: | Counter:PCB |
| Парткод: | B188 9890 |
| Деталь: | Harness:DC:HDD:Right |
| Парткод: | B188 5857 |
| Деталь: | Harness:DC:HDD |
| Парткод: | B188 5858 |
| Деталь: | PCB:DDR-DIMM:512MB |
| Парткод: | G108 5020 |
| Деталь: | PCB:IPU |
| Парткод: | B188 5220 |
| Деталь: | Harness:DC:IPU-CSS |
| Парткод: | B188 5893 |
| Деталь: | Harness:DC:IPU-CIS |
| Парткод: | B188 5860 |
| Деталь: | Harness:DC:BCU-IPU |
| Парткод: | B188 5755 |
| Деталь: | Gasket:4x7x40 |
| Парткод: | B1881365 |
| Деталь: | Gasket:4x7x85 |
| Парткод: | B1881378 |
| Деталь: | Gasket:2x7x150 |
| Парткод: | B1881376 |
| Деталь: | Insulating Sheet:IPUT:IOB |
| Парткод: | B188 5987 |
| Деталь: | Harness:DC:Scanner:NA (120V) |
| Парткод: | B188 5875 |
| Деталь: | Harness:DC:IPU-LCDC:EU (230V) |
| Парткод: | B188 5861 |
| Деталь: | Harness:DC:IPU-VDB |
| Парткод: | B188 5834 |
| Деталь: | PCB:Video_link2:DC2 |
| Парткод: | B809 5660 |
| Деталь: | PCB:CNB1 |
| Парткод: | B188 5230 |
| Деталь: | PCB:CNB2 |
| Парткод: | B188 5232 |
| Деталь: | Gasket:3x5x38 |
| Парткод: | B1881390 |
| Деталь: | Gasket:5x10x100 |
| Парткод: | B1881391 |
| Деталь: | Gasket:6x10x210 |
| Парткод: | B1881392 |
| Деталь: | Gasket: 10x10x75 |
| Парткод: | B1881393 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0168 |
| Деталь: | Cover:Motor |
| Парткод: | B188 2816 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Gear - 36Z |
| Парткод: | AB01 1412 |
| Деталь: | Gear Pulley - 37Z/40T |
| Парткод: | AB01 7527 |
| Деталь: | Timing Belt - 954 |
| Парткод: | B010 2856 |
| Деталь: | Switch Plate |
| Парткод: | B010 2979 |
| Деталь: | PUSH SWITCH |
| Парткод: | AW50 0012 |
| Деталь: | STAY:UPPER |
| Парткод: | B188 2878 |
| Деталь: | REGISTRATION CLUTCH |
| Парткод: | AX21 0091 |
| Деталь: | Feed Roller:Unit |
| Парткод: | B188 2733 |
| Деталь: | Snap Ring - M6 |
| Парткод: | 52 152 621 |
| Деталь: | Pulley - 23MM |
| Парткод: | AB03 0677 |
| Деталь: | Stay:Inner Back |
| Парткод: | B188 2880 |
| Деталь: | Timing Pulley - 25T |
| Парткод: | AB03 0678 |
| Деталь: | Tightener |
| Парткод: | B188 2868 |
| Деталь: | Tightener Spring |
| Парткод: | AA06 0854 |
| Деталь: | Bracket: Motor |
| Парткод: | B188 2876 |
| Деталь: | Motor Cushion |
| Парткод: | B188 2579 |
| Деталь: | Stepper Motor:MM56:DC24V 14.8W |
| Парткод: | AX06 0295 |
| Деталь: | Bracket: Knob |
| Парткод: | B188 2968 |
| Деталь: | Timing Belt - S2M 334 |
| Парткод: | B010 2966 |
| Деталь: | Timing Belt - S2M 252 |
| Парткод: | B010 2964 |
| Деталь: | Harness:DC:Motor:Paper Feed:Upper |
| Парткод: | B188 5818 |
| Деталь: | Harness:DC:Upper Paper Feed |
| Парткод: | B188 5839 |
| Деталь: | Harness:Siro-sikan-kenti |
| Парткод: | B188 5787 |
| Деталь: | PCB:RFDB |
| Парткод: | B188 5450 |
| Деталь: | Guide Plate:Base:Tray |
| Парткод: | B188 2943 |
| Деталь: | Timing Pulley - 32T |
| Парткод: | AB03 0679 |
| Деталь: | Paper Holder Lock Lever |
| Парткод: | B353 2773 |
| Деталь: | Decal - Paper Holder Chart |
| Парткод: | B353 2778 |
| Деталь: | Paper Holder Stopper |
| Парткод: | B353 2772 |
| Деталь: | Arm Stopper Pawl |
| Парткод: | B353 2774 |
| Деталь: | Lock Compression Spring |
| Парткод: | B353 2776 |
| Деталь: | Upper Arm Stopper Pawl |
| Парткод: | B353 2777 |
| Деталь: | Roll Paper Holder |
| Парткод: | B353 2771 |
| Деталь: | Paper Holder Pawl |
| Парткод: | B353 2775 |
| Деталь: | Roller Shaft |
| Парткод: | B353 2765 |
| Деталь: | Paper Holder Brake |
| Парткод: | B353 2766 |
| Деталь: | Brake Compression Spring |
| Парткод: | B353 2767 |
| Деталь: | Holder:Left |
| Парткод: | B188 2808 |
| Деталь: | MAGNET CATCH |
| Парткод: | AG07 0514 |
| Деталь: | POSITIONING PLATE |
| Парткод: | B353 2768 |
| Деталь: | Holder:Right |
| Парткод: | B188 2810 |
| Деталь: | Decal - Toner Operation |
| Парткод: | B0101281 |
| Деталь: | LEFT UPPER COVER |
| Парткод: | B0101257 |
| Деталь: | Decal - Main Power |
| Парткод: | B0101330 |
| Деталь: | Decal-main Switch |
| Парткод: | B0101331 |
| Деталь: | LEFT INNER COVER |
| Парткод: | B0101258 |
| Деталь: | Cover:Left Lower |
| Парткод: | B0101356 |
| Деталь: | Cover:Left Rear |
| Парткод: | B1881264 |
| Деталь: | Gasket:Left Rear |
| Парткод: | B1881349 |
| Деталь: | Cover:CSS |
| Парткод: | B1881265 |
| Деталь: | Pin:Guide Plate:Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Cover:Left Rear:Small |
| Парткод: | B1881280 |
| Деталь: | Cover:Right Rear:Small |
| Парткод: | B1881279 |
| Деталь: | Cover:Rear Lower:Left |
| Парткод: | B1881297 |
| Деталь: | Inner Cover:Left |
| Парткод: | B188 1271 |
| Деталь: | Gasket:Right Front:Left Front |
| Парткод: | B188 1291 |
| Деталь: | Bracket:Cover:51.8 |
| Парткод: | B1881278 |
| Деталь: | Bracket:Switch:Development |
| Парткод: | B1881353 |
| Деталь: | Bracket:Magnet Catch |
| Парткод: | B1881354 |
| Деталь: | Cover:Development |
| Парткод: | B1881352 |
| Деталь: | Lower Exit Cover |
| Парткод: | B0101355 |
| Деталь: | Panel:Logo |
| Парткод: | B132 1531 |
| Деталь: | Inulating Sheet - Power Supply Unit |
| Парткод: | B0101268 |
| Деталь: | Sheet:Cover:Toner Cartridge |
| Парткод: | B1881356 |
| Деталь: | Entrance Cover - Manual Feed |
| Парткод: | B0101351 |
| Деталь: | Inner Cover:Right Upper |
| Парткод: | B188 1284 |
| Деталь: | RIGHT INNER COVER |
| Парткод: | B0101251 |
| Деталь: | UPPER RIGHT COVER |
| Парткод: | B0101250 |
| Деталь: | Gasket:Rear Middle |
| Парткод: | B1881288 |
| Деталь: | Cover:Right Lower |
| Парткод: | B188 1254 |
| Деталь: | Gasket:Right:Front Rear |
| Парткод: | B1881290 |
| Деталь: | Gasket:Right Rear:Left Rear |
| Парткод: | B1881287 |
| Деталь: | Cover:Right Rear |
| Парткод: | B188 1256 |
| Деталь: | Decal - Operation Instructions |
| Парткод: | B0101282 |
| Деталь: | Inner Cover:Right |
| Парткод: | B1881270 |
| Деталь: | Cover:Rear Lower:Right |
| Парткод: | B1881266 |
| Деталь: | Fan Motor:Sirocco:DC24V 9.6W |
| Парткод: | B188 3952 |
| Деталь: | Harness:DC:Separation:Fan Motor |
| Парткод: | B188 5881 |
| Деталь: | Vacuume Duct |
| Парткод: | B010 3954 |
| Деталь: | BUSHING - 6MM |
| Парткод: | 50 530 447 |
| Деталь: | Gear - 22Z |
| Парткод: | AB01 3681 |
| Деталь: | Roller:Transport Belt:Drive |
| Парткод: | AF02 0610 |
| Деталь: | Bracket:Bearing |
| Парткод: | B188 3958 |
| Деталь: | Arm Bushing |
| Парткод: | A174 3946 |
| Деталь: | Shield:Vacuum:Upper |
| Парткод: | B188 3961 |
| Деталь: | Sheet:Ground Plate:Separation Belt |
| Парткод: | B188 3970 |
| Деталь: | Vacuum:Upper:Unit |
| Парткод: | B188 3965 |
| Деталь: | Driven Roller Bushing |
| Парткод: | A174 3942 |
| Деталь: | Decurler Transport Belt |
| Парткод: | AA04 0020 |
| Деталь: | Roller:Transport Belt |
| Парткод: | AF021081 |
| Деталь: | Gasket:Guide Plate:Transport |
| Парткод: | B188 3944 |
| Деталь: | Guide Plate:Transport |
| Парткод: | B188 3948 |
| Деталь: | PCB:Fpdb |
| Парткод: | B188 5460 |
| Деталь: | Pin:Guide Plate:Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Toner Recycling Pipe |
| Парткод: | B010 3663 |
| Деталь: | Toner Recycling Pipe Shield |
| Парткод: | AA153132 |
| Деталь: | Collection Bottle:Unit |
| Парткод: | B188 3661 |
| Деталь: | Used Toner Sensor |
| Парткод: | AW40 0014 |
| Деталь: | Decal:Toner Recycling |
| Парткод: | B125 3662 |
| Деталь: | Stripper Pawls |
| Парткод: | AE04 4054 |
| Деталь: | Stripper Spring |
| Парткод: | AA06 6052 |
| Деталь: | Exit Unit Grip |
| Парткод: | B010 4308 |
| Деталь: | Grip Cap - Exit Unit |
| Парткод: | B010 4309 |
| Деталь: | Positioning Plate:Lock |
| Парткод: | B188 4159 |
| Деталь: | Left Lock Spring |
| Парткод: | AA06 6257 |
| Деталь: | Right Lock Spring |
| Парткод: | AA06 6256 |
| Деталь: | Side Plate:Fusing/Exit:Left |
| Парткод: | B188 4303 |
| Деталь: | Side Plate:Fusing/Exit:Right |
| Парткод: | B188 4301 |
| Деталь: | Timing Belt - S2M262 |
| Парткод: | AA04 3921 |
| Деталь: | Pulley - 24T |
| Парткод: | AB03 0474 |
| Деталь: | Gear Pulley - 30Z/30T |
| Парткод: | AB01 7528 |
| Деталь: | Tightener Spring Plate |
| Парткод: | B010 4325 |
| Деталь: | Arm:Drive:Fusing/Paper Exit Unit |
| Парткод: | B188 4321 |
| Деталь: | Idler Gear - 30z |
| Парткод: | B010 4324 |
| Деталь: | Stay:Fusing/Paper Exit Unit |
| Парткод: | B188 4305 |
| Деталь: | UPPER GUIDE |
| Парткод: | B010 4312 |
| Деталь: | LEFT GUIDE |
| Парткод: | B010 4311 |
| Деталь: | Middle Guide - Exit Unit |
| Парткод: | B010 4315 |
| Деталь: | Pawl:Push Switch |
| Парткод: | B188 4319 |
| Деталь: | Bushing - 6x10x9mm |
| Парткод: | AA08 2058 |
| Деталь: | Exit Roller Shaft |
| Парткод: | AA14 0802 |
| Деталь: | Drive Roller - Upper Exit |
| Парткод: | B010 4319 |
| Деталь: | Drive Roller - Lower Exit |
| Парткод: | B010 4317 |
| Деталь: | Exit Tube |
| Парткод: | A163 4236 |
| Деталь: | Tube holder |
| Парткод: | A163 4235 |
| Деталь: | Exit Unit Arm Spring |
| Парткод: | AA06 6632 |
| Деталь: | Bracket:Spring:Lower Left |
| Парткод: | B188 6146 |
| Деталь: | Bracket:Spring:Lower Right |
| Парткод: | B188 6147 |
| Деталь: | Spring:Scanner:Open And Close:Left |
| Парткод: | AA06 6365 |
| Деталь: | Spring:Scanner:Open And Close:Right |
| Парткод: | AA06 6364 |
| Деталь: | Gasket:Guide Plate:Upper Front:Lower |
| Парткод: | B188 6198 |
| Деталь: | Gear - 22Z |
| Парткод: | AB01 1376 |
| Деталь: | Guide Plate:Upper Front:NA |
| Парткод: | B188 6480 |
| Деталь: | Guide Plate:Upper Front |
| Парткод: | B188 6191 |
| Деталь: | Upper Front Sheet - Guide Plate |
| Парткод: | B010 6193 |
| Деталь: | Roller Sheet - Upper Front 100m |
| Парткод: | B010 6195 |
| Деталь: | Pin:Guide Plate:Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Hinge Shaft |
| Парткод: | AA14 5820 |
| Деталь: | Spring:Gate Plate:1.6n |
| Парткод: | AA06 6362 |
| Деталь: | Gate Plate Sheet |
| Парткод: | B010 6133 |
| Деталь: | Guide Plate:Exit:Gate Plate |
| Парткод: | B188 6130 |
| Деталь: | Spring:Gate Plate |
| Парткод: | AA06 6359 |
| Деталь: | DC Solenoid:Gate Pawl:Link:Unit |
| Парткод: | B188 6132 |
| Деталь: | Bracket:Dc Solenoid:Gate Plate |
| Парткод: | B188 6134 |
| Деталь: | STAY:UPPER |
| Парткод: | B188 6155 |
| Деталь: | Gasket:Stay:Upper |
| Парткод: | B188 6166 |
| Деталь: | Grouding Plate - Upper Stay |
| Парткод: | B010 6165 |
| Деталь: | BUSHING - 6MM |
| Парткод: | H0531600 |
| Деталь: | Collar - M6 |
| Парткод: | A454 1172 |
| Деталь: | Bracket:Paper Feed Sensor:Upper |
| Парткод: | B188 6323 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0167 |
| Деталь: | Harness:DC:Scanner:Paper Feed Sensor |
| Парткод: | B188 5846 |
| Деталь: | Spring:Pressure |
| Парткод: | AA06 6358 |
| Деталь: | Guide Plate:Exit:Transport |
| Парткод: | B188 6257 |
| Деталь: | Guide Plate:Exit:Outer:Unit |
| Парткод: | B188 6314 |
| Деталь: | Supporting Plate:Exit:Outer |
| Парткод: | B188 6281 |
| Деталь: | EXIT ROLLER |
| Парткод: | AF02 0612 |
| Деталь: | Guide Plate:Exit:Inner |
| Парткод: | B188 6265 |
| Деталь: | Grounding Plate - Exit Guide Plate |
| Парткод: | B010 6282 |
| Деталь: | Tension Spring - Door Switch |
| Парткод: | A267 5821 |
| Деталь: | Screw: M4 |
| Парткод: | AA14 3545 |
| Деталь: | Tightener:Drive:Fusing |
| Парткод: | B188 1175 |
| Деталь: | Guide Plate:Motor:Fusing |
| Парткод: | B1881174 |
| Деталь: | DC Motor:MM62:DC24V 20W |
| Парткод: | AX06 0294 |
| Деталь: | Gear - 33Z/67Z |
| Парткод: | AB01 7577 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Tightener |
| Парткод: | G020 4444 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Brushless Motor:DC24V:45W:S |
| Парткод: | AX06 0293 |
| Деталь: | Guide Plate:Motor:Development |
| Парткод: | B188 1165 |
| Деталь: | Timing Belt - 420S3M |
| Парткод: | AA04 3924 |
| Деталь: | Pulley Flange |
| Парткод: | A2591158 |
| Деталь: | Gear Pulley - 33Z/25T |
| Парткод: | AB01 7578 |
| Деталь: | Coupling Gear - 48z/27z |
| Парткод: | AB01 7534 |
| Деталь: | Bracket:Cover |
| Парткод: | B188 1252 |
| Деталь: | Fan Shield |
| Парткод: | AA15 3452 |
| Деталь: | Duct:Vacuum |
| Парткод: | B1881952 |
| Деталь: | Timing Belt:B110S2M438 |
| Парткод: | AA04 3967 |
| Деталь: | Gear - 102Z/24Z |
| Парткод: | AB01 7532 |
| Деталь: | Idler Gear - 37z |
| Парткод: | AB01 1415 |
| Деталь: | Timing Pulley - 41T |
| Парткод: | AB03 0681 |
| Деталь: | Snap Ring - M6 |
| Парткод: | 52 152 621 |
| Деталь: | Arm:Coupling:Toner Collection Coil |
| Парткод: | B188 1159 |
| Деталь: | Gear - 111Z/24Z |
| Парткод: | AB01 7533 |
| Деталь: | Bracket:Motor:Main |
| Парткод: | B1881186 |
| Деталь: | Bracket:Tightener:Drive:Drum |
| Парткод: | B188 1193 |
| Деталь: | Timing Belt - 426S2M |
| Парткод: | AA04 3922 |
| Деталь: | Spacer - 6x22x1.5 |
| Парткод: | A300 3812 |
| Деталь: | Gear - 125Z/29Z |
| Парткод: | AB01 7524 |
| Деталь: | Spring - Transfer Corona |
| Парткод: | AA06 0569 |
| Деталь: | Bracket:Motor:Registration Roller |
| Парткод: | B188 1188 |
| Деталь: | Shadeing Plate:Motor Control Board |
| Парткод: | B188 6124 |
| Деталь: | Spring:Roller:Driven:2.99n |
| Парткод: | AA06 0967 |
| Деталь: | Rear Exit Tray |
| Парткод: | B0101358 |
| Деталь: | Heat Insulation:Fusing:Upper |
| Парткод: | B188 4195 |
| Деталь: | Screw:M3:DIA4x5.6 |
| Парткод: | AA14 3542 |
| Деталь: | Bracket:Plate:Heat Insulation |
| Парткод: | B188 4288 |
| Деталь: | Decal:Warning (High Temperature) |
| Парткод: | B188 4196 |
| Деталь: | Front Fusing Roller |
| Парткод: | B010 4178 |
| Деталь: | Fusing Roller Bracket |
| Парткод: | B010 4180 |
| Деталь: | Heat Insulation:Fusing:Front |
| Парткод: | B188 1121 |
| Деталь: | Bracket:Main Switch |
| Парткод: | B188 1274 |
| Деталь: | Harness:AC:Machine Or Copier:NA |
| Парткод: | B188 5782 |
| Деталь: | Harness:AC:Machine Or Copier:EU |
| Парткод: | B188 5783 |
| Деталь: | Development Unit Shaft |
| Парткод: | AA14 3719 |
| Деталь: | Guard:Main Switch |
| Парткод: | B1881285 |
| Деталь: | Pin:Guide Plate:Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | SPRING |
| Парткод: | AA06 3279 |
| Деталь: | Paper feed Bushing |
| Парткод: | A163 2569 |
| Деталь: | Driven Roller - Guide Plate |
| Парткод: | A163 2576 |
| Деталь: | GUIDE PLATE |
| Парткод: | B188 2575 |
| Деталь: | Spring:9.8n |
| Парткод: | AA06 3427 |
| Деталь: | DRIVEN ROLLER |
| Парткод: | A163 2560 |
| Деталь: | Middle Guide Plate |
| Парткод: | B188 2573 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0168 |
| Деталь: | Feeler Bracket |
| Парткод: | A163 2562 |
| Деталь: | FEELER SPRING |
| Парткод: | AA06 6255 |
| Деталь: | Registration Sensor Feeler |
| Парткод: | A163 2577 |
| Деталь: | Ground Wire:Registration |
| Парткод: | B188 5889 |
| Деталь: | Spacer:Registration Guide |
| Парткод: | B188 2622 |
| Деталь: | Harness:DC:Registration Sensor |
| Парткод: | B188 5813 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0139 |
| Деталь: | Stay:Registration Guide |
| Парткод: | B188 2620 |
| Деталь: | Control Plate:Roller:Driven |
| Парткод: | B188 2571 |
| Деталь: | Stay:Pre-transfer Lamp |
| Парткод: | B188 3827 |
| Деталь: | Duct:Vacuum |
| Парткод: | B1881952 |
| Деталь: | Fan Shield |
| Парткод: | AA15 3452 |
| Деталь: | Harness:High Voltage:Charge Corona |
| Парткод: | B188 5784 |
| Деталь: | Harness:High Voltage:Development |
| Парткод: | B188 5772 |
| Деталь: | Harness:High Voltage:Grid |
| Парткод: | B188 5773 |
| Деталь: | Power Pack:CGB |
| Парткод: | B188 5735 |
| Деталь: | DC Motor:DC5V 0.46W:Unit |
| Парткод: | B188 2058 |
| Деталь: | Harness:DC:Machine Or Copier:Right |
| Парткод: | B188 5835 |
| Деталь: | LED Head:Unit |
| Парткод: | B1881862 |
| Деталь: | Harness:DC:IPU-VDB |
| Парткод: | B188 5834 |
| Деталь: | Front Exit Tray |
| Парткод: | B0101269 |
| Деталь: | Spring Plate - LED Head |
| Парткод: | B0101962 |
| Деталь: | GROUND PLATE |
| Парткод: | B0101103 |
| Деталь: | Magnet Catch:44.1n |
| Парткод: | AG07 0504 |
| Деталь: | PCB:VDB |
| Парткод: | B188 5260 |
| Деталь: | BUSHING |
| Парткод: | G024 1473 |
| Деталь: | Transport Roller:Original |
| Парткод: | AF02 0611 |
| Деталь: | Arm Bushing |
| Парткод: | A163 6081 |
| Деталь: | Ground Plate - Fusing |
| Парткод: | A294 1134 |
| Деталь: | Grounding Plate - Lower Guide Plate |
| Парткод: | B010 6054 |
| Деталь: | Guide Plate Stud |
| Парткод: | AA14 3770 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0167 |
| Деталь: | Bracket:Paper Feed Sensor |
| Парткод: | B188 6287 |
| Деталь: | Therm istor:Charge |
| Парткод: | AW10 0101 |
| Деталь: | Grounding Plate - Lower Rear |
| Парткод: | B010 6055 |
| Деталь: | Magnetic Clutch:48t |
| Парткод: | AX26 0007 |
| Деталь: | Control Plate:Roller:Exposure |
| Парткод: | B188 4604 |
| Деталь: | Shoulder Screw - Pressure Arm |
| Парткод: | AA143139 |
| Деталь: | Holder:Roller:Exposure:Left |
| Парткод: | B188 6110 |
| Деталь: | Platen Roller |
| Парткод: | AF02 1056 |
| Деталь: | Gear:28Z |
| Парткод: | B188 6111 |
| Деталь: | Gear -28Z |
| Парткод: | AB01 3992 |
| Деталь: | Arm:Roller:Exposure:Left |
| Парткод: | B188 4600 |
| Деталь: | Arm:Roller:Exposure:Right |
| Парткод: | B188 4602 |
| Деталь: | Bushing - 8mm |
| Парткод: | 53 041 639 |
| Деталь: | Spacer - Spring |
| Парткод: | AA13 2063 |
| Деталь: | Spring:Roller: Exposure |
| Парткод: | AA06 6361 |
| Деталь: | Original Transport Roller - Rear |
| Парткод: | AF02 0534 |
| Деталь: | Exposure Arm Sleeve |
| Парткод: | AA13 2210 |
| Деталь: | Gear - 28Z |
| Парткод: | A174 4598 |
| Деталь: | Gear Pulley - 38Z/48T |
| Парткод: | AB01 7526 |
| Деталь: | Photointerruptor:Lg248nl1 |
| Парткод: | GW02 0020 |
| Деталь: | Bracket:Set Sensor |
| Парткод: | B188 6108 |
| Деталь: | Stepper Motor:DC24V 14.4W |
| Парткод: | B188 6125 |
| Деталь: | Cushion - Stepper Motor |
| Парткод: | A1341724 |
| Деталь: | Spacer:Stepper Motor |
| Парткод: | B188 6122 |
| Деталь: | Bracket:Stepper Motor |
| Парткод: | B188 6123 |
| Деталь: | Timing Pulley - 15 |
| Парткод: | AB03 0675 |
| Деталь: | Tightener |
| Парткод: | B188 6126 |
| Деталь: | Stud - M4 |
| Парткод: | 59 183 120 |
| Деталь: | Spring:Tightener |
| Парткод: | AA06 6363 |
| Деталь: | Belt Tightener |
| Парткод: | AB03 0098 |
| Деталь: | Timing Belt - B100S2M434 |
| Парткод: | AA04 3557 |
| Деталь: | Seal:Toner Cartridge:Front |
| Парткод: | B125 3220 |
| Деталь: | Development Unit |
| Парткод: | B188 3055 |
| Деталь: | Shaft Holder - Pick-up Roller |
| Парткод: | 54 466 214 |
| Деталь: | Drum Stay:Toner Hopper |
| Парткод: | B188 3145 |
| Деталь: | Spring Clutch:Toner Hopper |
| Парткод: | AX20 0272 |
| Деталь: | Harness:DC:Development Unit |
| Парткод: | B188 5885 |
| Деталь: | Drum Stay:Spring |
| Парткод: | B010 3211 |
| Деталь: | Spring:Joint |
| Парткод: | B010 3212 |
| Деталь: | Joint:Toner Hopper:Unit |
| Парткод: | B010 3206 |
| Деталь: | Gear - 28Z |
| Парткод: | B0103121 |
| Деталь: | Spacer - 1x8x12 |
| Парткод: | AA13 2025 |
| Деталь: | Left Positioning Bracket |
| Парткод: | B188 3141 |
| Деталь: | Right Positioning Bracket |
| Парткод: | B188 3136 |
| Деталь: | Gear - 19Z |
| Парткод: | B010 3124 |
| Деталь: | Bushing - 8x12x10mm |
| Парткод: | AA08 2021 |
| Деталь: | Gear - 23Z |
| Парткод: | B010 3111 |
| Деталь: | Gear - 32Z |
| Парткод: | B010 3126 |
| Деталь: | Gear - 25Z/30Z |
| Парткод: | AB01 7539 |
| Деталь: | Gear - 21Z |
| Парткод: | B010 3116 |
| Деталь: | Bushing:DIA6 |
| Парткод: | AA08 0336 |
| Деталь: | Development Sleeve Gear |
| Парткод: | A1741163 |
| Деталь: | Bearing Case:DIA26 |
| Парткод: | AA08 4057 |
| Деталь: | Pin:Guide Plate:Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Dust Filter - Development |
| Парткод: | AA01 2095 |
| Деталь: | Entrance Seal |
| Парткод: | B010 3150 |
| Деталь: | Electrode Plate:Development |
| Парткод: | B188 3081 |
| Деталь: | Development Knob |
| Парткод: | B010 3069 |
| Деталь: | Seal - 12x837 |
| Парткод: | AA150109 |
| Деталь: | Toner Hopper Shield |
| Парткод: | AA153448 |
| Деталь: | Toner Hopper Upper Shield |
| Парткод: | AA153449 |
| Деталь: | Casing:Toner Hopper |
| Парткод: | B188 3089 |
| Деталь: | Stay:Stripper Pawls:Pressure Roller |
| Парткод: | B188 4093 |
| Деталь: | Ground Wire:Led Head:Front |
| Парткод: | B188 5596 |
| Деталь: | Fusing Entrance Guide Plate |
| Парткод: | B188 4141 |
| Деталь: | Entrance Guide Plate Holder |
| Парткод: | A163 4122 |
| Деталь: | Holder Cam |
| Парткод: | A163 4124 |
| Деталь: | Lever:Pressure:Middle |
| Парткод: | B188 4132 |
| Деталь: | Screw: M4:DIA6x1.7:Black |
| Парткод: | AA14 3543 |
| Деталь: | Lever: Pressure |
| Парткод: | B188 4131 |
| Деталь: | Ball Bearing - 20x42x12 |
| Парткод: | 52 194 624 |
| Деталь: | PRESSURE ROLLER |
| Парткод: | AE02 0096 |
| Деталь: | C - Ring - 19m |
| Парткод: | A163 4109 |
| Деталь: | Pressure Roller Shaft |
| Парткод: | B010 4081 |
| Деталь: | Pressure Roller Holder |
| Парткод: | B010 4085 |
| Деталь: | BUSHING |
| Парткод: | AA08 2062 |
| Деталь: | Bracket:Anchor:Pressure |
| Парткод: | B188 4136 |
| Деталь: | Spring:Fusing:Cleaning Blade |
| Парткод: | AA06 0966 |
| Деталь: | BUSHING - 6MM |
| Парткод: | 50 530 447 |
| Деталь: | PRESSURE SHAFT |
| Парткод: | B010 4139 |
| Деталь: | Bracket:Motor:Left:Unit |
| Парткод: | B188 4129 |
| Деталь: | Gear - 48Z |
| Парткод: | AB01 0346 |
| Деталь: | Gear - 40Z |
| Парткод: | AB01 0352 |
| Деталь: | Stepper Motor:DC24V 4.8W |
| Парткод: | B188 4137 |
| Деталь: | Bracket:Thermistor |
| Парткод: | B188 4119 |
| Деталь: | Thermistor Pressure Roller |
| Парткод: | AW10 0058 |
| Деталь: | Bracket:Photointerruptor:Left |
| Парткод: | B188 4145 |
| Деталь: | LED Sensor Type S |
| Парткод: | 52 055 250 |
| Деталь: | Stripper Spring |
| Парткод: | AA06 6285 |
| Деталь: | Pressure Roller Stripper |
| Парткод: | AE04 4031 |
| Деталь: | Decal - Paper Tray Display |
| Парткод: | B010 2845 |
| Деталь: | Cover:Front |
| Парткод: | B188 2930 |
| Деталь: | Lever Knob |
| Парткод: | A353 2243 |
| Деталь: | Holder:Roll Paper |
| Парткод: | B188 2704 |
| Деталь: | Decal:Roll Paper:Caution Chart:NA |
| Парткод: | B188 2823 |
| Деталь: | Exit Guide Roller |
| Парткод: | B010 2717 |
| Деталь: | Decal:Operate:Roll Paper:1 |
| Парткод: | B188 2835 |
| Деталь: | Decal:Operate:Roll Paper:2 |
| Парткод: | B188 2841 |
| Деталь: | Stay:Guide Plate:Exit |
| Парткод: | B188 2716 |
| Деталь: | BUSHING - 6MM |
| Парткод: | AA08 0203 |
| Деталь: | EXIT ROLLER |
| Парткод: | AF02 2034 |
| Деталь: | EXIT ROLLER SPRING |
| Парткод: | AA06 3122 |
| Деталь: | Spring:Pressure:Brush Roller |
| Парткод: | AA06 0974 |
| Деталь: | Guide Plate:Exit:Outer:Peen |
| Парткод: | B188 2710 |
| Деталь: | Cover:Cutter Unit:Left |
| Парткод: | B188 2773 |
| Деталь: | TENSION SPRING |
| Парткод: | 54 031 030 |
| Деталь: | Lever:Lock:Left |
| Парткод: | B188 2896 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3718 |
| Деталь: | Heater: 120 V: 13W |
| Парткод: | AX40 0188 |
| Деталь: | Heater:230V:13W |
| Парткод: | AX40 0189 |
| Деталь: | LEVER SHAFT |
| Парткод: | B010 2902 |
| Деталь: | Grip Lever |
| Парткод: | B010 2900 |
| Деталь: | Lever:Lock:Right |
| Парткод: | B188 2898 |
| Деталь: | Keytop |
| Парткод: | B010 2978 |
| Деталь: | Decal:Operate:Holder:EXP |
| Парткод: | B188 2824 |
| Деталь: | Decal:Dehumidifier: Switch |
| Парткод: | B188 2846 |
| Деталь: | LEFT INNER COVER |
| Парткод: | B010 2930 |
| Деталь: | Decal - Paper Hodler Operate |
| Парткод: | B010 2842 |
| Деталь: | RIGHT INNER COVER |
| Парткод: | B010 2932 |
| Деталь: | Harness Clamp - FCW-52 |
| Парткод: | B010 2947 |
| Деталь: | Bracket:Micro Switch |
| Парткод: | B188 2705 |
| Деталь: | Right Sheet - Side Plate |
| Парткод: | B010 2827 |
Коды ошибок
SC143
SC191
SC300
SC303
SC305
SC345
SC347
SC350
SC351
SC352
SC353
SC354
SC401
SC411
SC440
SC503
SC504
SC506
SC507
SC531
SC532
SC533
SC534
SC535
SC541
SC542
SC543
SC544
SC545
SC546
SC547
SC549
SC591
SC592
SC593
SC594
SC595
SC596
SC630
SC632
SC633
SC634
SC635
SC670
SC672
SC818
SC819
SC820
SC821
SC822
SC823
SC824
SC826
SC827
SC828
SC829
SC838
SC850
SC851
SC853
SC854
SC855
SC856
SC857
SC860
SC861
SC863
SC864
SC865
SC866
SC867
SC868
SC870
SC873
SC874
SC875
SC880
SC900
SC901
SC910 … SC914
SC919
SC920
SC921
SC925
SC954
SC955
SC964
SC965
SC967
SC990
SC991
SC992
SC997
SC998
Описание
| Error code: | SC143 |
| Description: | SBU Auto Adjust Error At power on the automatic white level adjustment failed. |
| Causes: | • Clean the white plate • Clean the optics and lenses • Check the connectors between the SBU and IPU. • Replace the SBU • Replace the IPU • Replace the VBCU • Replace the exposure lamp |
| Error code: | SC191 |
| Description: | Original exit roller thermistor error The original exit roller thermistor reading was abnormal. |
| Causes: | • Thermistor connection loose, broken, defective • Thermistor short • Harness between thermistor and IOB loose, broken, defective • IOB defective • BCU defective |
| Error code: | SC300 |
| Description: | AC charge output error 1: K An interrupt checks the status of the power pack every 2 ms. This SC is issued if the BICU detects a short in the AC charge for black, magenta, cyan, or yellow (V = 0, for example) for 500 ms (250 times). |
| Causes: | • Disconnected or defective high voltage harness • Defective high voltage power supply • Defective EGB |
| Remedy: | • High voltage power supply • BICU defective • OPC unit defective 1. Disconnect the high voltage cable from Terminal C of the multiple highvoltage supply board. 2. Attach a voltmeter to the terminal. 3. If there is no output from the terminal, replace the high voltage power supply. -or- If there is output from the terminal, test the resistance between the high voltage cable and the ground. If resistance is nearly "0", check the highvoltage harness for defects and replace it if necessary. 4. Test the conductivity between the OPC unit and the ground. If there is no conductivity between the OPC unit and ground, replace the OPC unit. 5. If there is no charge PWM signal, replace the harness and/or BICU. |
| Error code: | SC303 |
| Description: | AC charge output error 4: Y An interrupt checks the status of the power pack every 2 ms. This SC is issued if the BICU detects a short in the AC charge for black, magenta, cyan, or yellow (V = 0, for example) for 500 ms (250 times). |
| Causes: | • Disconnect the high voltage cable from Terminal C of the power pack. • Attach a voltmeter to the terminal. • If there is no output from the terminal, replace the power pack. -or- • If there is output from the terminal, test the resistance between the high voltage cable and the ground. • If resistance is nearly "0", check the high-voltage harness for defects and replace it if necessary. • Test the conductivity between the PCU and the ground. If there is no conductivity between the PCU and ground, replace the PCU. • If there is no charge PWM signal, replace the harness and/or BCU. |
| Remedy: | • High voltage power supply • BICU defective • OPC unit defective 1. Disconnect the high voltage cable from Terminal C of the multiple highvoltage supply board. 2. Attach a voltmeter to the terminal. 3. If there is no output from the terminal, replace the high voltage power supply. -or- If there is output from the terminal, test the resistance between the high voltage cable and the ground. If resistance is nearly "0", check the highvoltage harness for defects and replace it if necessary. 4. Test the conductivity between the OPC unit and the ground. If there is no conductivity between the OPC unit and ground, replace the OPC unit. 5. If there is no charge PWM signal, replace the harness and/or BICU. |
| Error code: | SC305 |
| Description: | Charge corona wire cleaner error The wire cleaning pad did not return to its home position within 5 sec. after wire cleaning. |
| Causes: | • Wire cleaner motor harness loose, broken, defective • Wire cleaner motor defective • Charge corona wire defective |
| Remedy: | • This SC is not issued if SP2804 is set to zero (no cleaning). • If immediate repair is not possible, set SP2804 to zero to switch off the charge corona cleaner function. |
| Error code: | SC345 |
| Description: | Toner Supply Pump Motor Error (K, M, C, Y) |
| Causes: | The toner supply pump motor failed to start within the prescribed time or failed during normal operation. |
| Remedy: | • Motor harness disconnected or broken • Toner pump unit harness disconnected or broken • Toner pump unit panel mount connector broken • Check each toner supply unit (K, M, C, Y) for any obstructions that could be blocking operation of a pump or sub hopper • Toner supply pump motor defective |
| Error code: | SC347 |
| Description: | Development drive motor lock error Development drive motor stopped (the lock signal remained HIGH longer than 5 sec. when the development was operating). |
| Causes: | • Motor or drive mechanism blocked • Motor harness loose, broken, defective • Motor defective |
| Error code: | SC350 |
| Description: | Developer Fill Error: K The PCU failed to fill with developer from the developer bottle when SP3814-1 was executed. |
| Causes: | • Developer bottle not set correctly • Developer in the bottle is clogged and not flowing Note: For detailed information about how to handle problems developer filling, see "Handling Problems with Developer Filling" under "PCU" in Section 3. |
| Remedy: | 1. Check if the connectors on the TD sensor interface board 1 (copier) and the main control board (CN353) are properly connected. 2. Make sure 5V and 12V are provided to the TD sensor interface board 1 from the main control board (CN353). 3. Check if the harnesses are damaged. 4. Make sure TD sensor interface boards 1 and 2 are properly installed. 5. Replace TD sensor interface board s1, 2, main control board, and/or the I/O control board. |
| Error code: | SC351 |
| Description: | Developer Fill Error: M The PCU failed to fill with developer from the developer bottle when SP3814-1 was executed. |
| Causes: | • Developer bottle not set correctly • Developer in the bottle is clogged and not flowing Note: For detailed information about how to handle problems developer filling, see "Handling Problems with Developer Filling" under "PCU" in Section 3. |
| Remedy: | 1. Make sure the connectors on the TD sensor interface board 2 (revolver) and the TD sensor and slip ring are properly connected. 2. Check if the harnesses is damaged. 3. Replace the TD sensor. 4. Replace the TD sensor interface board 2. 5. Replace the TD sensor interface board 1. 6. Replace the main control board. |
| Error code: | SC352 |
| Description: | Developer Fill Error: C The PCU failed to fill with developer from the developer bottle when SP3814-1 was executed. |
| Causes: | • Developer bottle not set correctly • Developer in the bottle is clogged and not flowing Note: For detailed information about how to handle problems developer filling, see "Handling Problems with Developer Filling" under "PCU" in Section 3. |
| Error code: | SC353 |
| Description: | Developer Fill Error: Y The PCU failed to fill with developer from the developer bottle when SP3814-1 was executed. |
| Causes: | • Developer bottle not set correctly • Developer in the bottle is clogged and not flowing Note: For detailed information about how to handle problems developer filling, see "Handling Problems with Developer Filling" under "PCU" in Section 3. |
| Error code: | SC354 |
| Description: | Bk-TD sensor gain adjustment error - Definition - [B] When adjusting TD sensor gain during the toner density initial setting, Vcnt (output voltage) does not reach a value between 7 and 11 V. |
| Causes: | • Main control board defective |
| Error code: | SC401 |
| Description: | ID sensor error 2: Vsg When the ID sensor was calibrated, Vsg (reflectivity of the bare drum surface) was detected less than 2.5V after two attempts. -or- After calibration, Vsg was detected as 5.0V at PWM adjustment and PWM=0. |
| Causes: | • Dirty ID sensor • ID sensor harness connection loose, broken, defective • TD power pack defective • IOB defective |
| Error code: | SC411 |
| Description: | ID sensor error 3: Development γ M Development gamma for black, magenta, cyan, or yellow is not within range (0.3 to 6.0). Process control halts when this SC is issued. |
| Causes: | • Toner density abnormal. Refer to the image troubleshooting section in Section 4 of the Venus-C1 B132 Service Manual (Self-Check Error Codes 55 to 59, 61). • LD sensor harness loose, broken, defective • Potential sensor defective • LD unit not firing • ITB separation for CMY abnormal • Transfer power pack defective) |
| Remedy: | • Toner density not normal: Refer to the procedure for process control self-check error codes 55 to 59 to 59, and 61 (section 4.2.4) • Potential sensor defective • Laser diode not firing • ITB separation for CMY abnormal • Transfer power pack defective • ID sensor defective |
| Error code: | SC440 |
| Description: | Image transfer power pack error 1: K An interrupt checks the status of the power pack every 2 ms. This SCis issued if the BICU detects a short in the power pack for K, M, C, or Y 250 times within 500 ms. |
| Causes: | • Transfer belt damaged, insulation damaged • Insulation on high voltage cable damaged • Another hot point inside the machine has damaged insulation • Insulation around high-voltage power supply damaged |
| Remedy: | • Transfer belt damaged, insulation damaged • Insulation on high voltage cable damaged • Another hot point inside the machine has damaged insulation • Insulation around high-voltage power supply damaged • IOB damaged |
| Error code: | SC503 |
| Description: | Tray 1 feed error • The lift sensor is not activated within 10 seconds after the tray lift motor starts lifting the bottom plate. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec. |
| Causes: | • Tray lift motor defective or disconnected • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle |
| Remedy: | • Tray lift motor defective or disconnected • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle |
| Error code: | SC504 |
| Description: | Tray 2 feed error • The lift sensor is not activated within 10 seconds after the tray lift motor starts lifting the bottom plate. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec. |
| Causes: | • Tray lift motor defective or disconnected • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle |
| Remedy: | • Tray lift motor defective or disconnected • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle |
| Error code: | SC506 |
| Description: | Tandem tray back fence motor error. The back fence should be closed but the fence was not detected in the closed position within 500 ms. -or- The back fence should be open but the fence was not detected in the open within 500 ms. |
| Causes: | The tray lift motor, pick-up solenoid, lift sensor, or lower limit sensor did not operate correctly. |
| Remedy: | • Paper loaded incorrectly • Back fence motor harness disconnected, loose, defective • Back fence motor defective • Paper blocking sensors • Paper stuck between tray and motor • Back fence close, back fence open sensor harnesses disconnected, loose, or defective. • Back fence close, back fence open sensor defective • Paper or other obstacle is interfering with movement of the fence |
| Error code: | SC507 |
| Description: | Tandem Tray Rear Fence Motor Error (1st Tray) |
| Causes: | One of the following occurred: • The return sensor does not switch on within 10 sec. after the rear fence motor switches on. • The HP sensor does not switch on 10 sec. after the rear fence motor switches on. • The HP sensor and return sensor switch on at the same time. |
| Remedy: | • Rear fence motor harness disconnected or broken • Paper or other obstacle interfering with operation of the sensors • Paper or other obstacle trapped between tray and motor • Motor mechanical overload due to obstruction • Return sensor or HP sensor harness disconnected or broken • Return sensor or HP sensor dirty • Rear fence motor defective • Return sensor or HP sensor defective |
| Error code: | SC531 |
| Description: | Fan error 2: fusing cooling fan motor. The lock signal remained HIGH for 5 sec. while the fan at the front of the fusing unit near the heat dissipation fins was operating. |
| Causes: | • Disconnected or defective motor harness. • Defective LSU fan motor |
| Remedy: | • Motor overload due to obstacle interfering with operation of the fan • Fan harness loose, disconnected, defective • Fan defective |
| Error code: | SC532 |
| Description: | Fan error 3: PCB box fan. The lock signal remained HIGH for 5 sec. while the fan that cools the printed circuit boards was operating. |
| Causes: | • Disconnected or defective motor harness. • Defective air intake fan motor |
| Remedy: | • Motor overload due to obstacle interfering with operation of the fan • Fan harness loose, disconnected, defective • Fan defective |
| Error code: | SC533 |
| Description: | Fan error 4: fusing exhaust fan. The lock signal remained HIGH for 5 sec. while the fan that draws air out of the fusing unit was operating. |
| Causes: | • Disconnected or defective motor harness. • Defective PSU fan motor |
| Remedy: | • Motor overload due to obstacle interfering with operation of the fan • Fan harness loose, disconnected, defective • Fan defective |
| Error code: | SC534 |
| Description: | Fan error 5: duplex exhaust fan. The lock signal remained HIGH for 5 sec. while the fan that draws air out of the duplex unit was operating. |
| Causes: | • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged |
| Remedy: | • Motor overload due to obstacle interfering with operation of the fan • Fan harness loose, disconnected, defective • Fan defective |
| Error code: | SC535 |
| Description: | Temperature/Humidity control abnormal. The output of the temperature/humidity sensor reaches the upper or lower limit, even after the Peltier unit has been ON for 3 hours. |
| Causes: | This is the small fan to the left or the large pressure roller fan on the front of the left drawer. |
| Remedy: | • Peltier Cooling Fan Motor is defective. |
| Error code: | SC541 |
| Description: | Heating roller thermistor 1 error 1: Poor connection. The temperature measured by the heating roller thermistor does not reach 130°C after 10 tries and 65 sec. have elapsed. |
| Causes: | • Disconnected thermistor • Defective harness connection |
| Remedy: | • Heating roller thermistor harness connection loose, disconnected, defective • Defective heating roller thermistor |
| Error code: | SC542 |
| Description: | Heating roller thermistor 1 error 2: No warmup. After the main switch is turned ON or the cover is closed, the heating roller temperature does not reach the ready temperature within 2 sec. after the heater switches ON. -or- If the roller was below 45°C, the heating roller did not reach the ready temperature 2 sec. after reaching 45°C. Note: Thermistor 2 stops monitoring the temperature once Thermistor 1 detects ready temperature. |
| Causes: | • Defective thermistor • Incorrect power supply input at the main power socket • Defective fusing lamp |
| Remedy: | • Thermistor is bent, installed incorrectly • Defective heating roller thermistor • Heating roller fusing lamp broken Do SP5810 to cancel the SC fusing code. |
| Error code: | SC543 |
| Description: | Heating roller thermistor 1 error 3: Software - High temperature. The thermistor detected a temperature over 230°C. |
| Causes: | • Defective I/O control (EGB) • Defective EGB |
| Remedy: | • TRIAC short • IOB defective • BICU defective • Fusing temperature out of control Do SP5810 to cancel the SC fusing code. |
| Error code: | SC544 |
| Description: | Heating roller thermistor 1 error 4: Hardware - High temperature. The thermistor detected a temperature over 260°C. |
| Causes: | The machine detected the CPU port LOW twice at 100 ms intervals and issued this SC. This check is always done to check for overheating, even if SC543 does not detect the problem. |
| Remedy: | • TRIAC short • IOB defective • BICU defective • Fusing temperature control is erratic Do SP5810 to cancel the SC fusing code. |
| Error code: | SC545 |
| Description: | Heating roller thermistor 1 error 5: Lamp remains ON. After hot roller reaches warmup temperature, the fusing lamps remained ON at full capacity for 25 sec. after reaching the warmup temperature while the hot roller was not rotating. |
| Causes: | • Deformed thermistor • Thermistor not in the correct position • Defective fusing lamp |
| Remedy: | • Thermistor damaged, or out of position • Fusing lamp disconnected, broken |
| Error code: | SC546 |
| Description: | Heating roller thermistor 2 error 1: Thermistor disconnected. The temperature measured by the heating roller thermistor does not reach 0°C after 45 sec. and remains over this temperature for 10 readings. |
| Causes: | Unstable connector contact of fusing thermistor |
| Remedy: | • Loose connection of the heating roller thermistor • Defective heating roller thermistor |
| Error code: | SC547 |
| Description: | Zero cross error. When the main switch is turned ON, the machine checks how many zero-cross signals are generated within 500 ms. This SC code is issued if the number of zerocross signals detected is either more than 66 or less than 45 for 10 readings. Note: Zero cross signals, generated from an ac power supply, are used to generate a trigger pulses to control the applied power accurately. |
| Causes: | Defective fusing lamp relay |
| Remedy: | • Electrical noise on the power supply line • Fusing relay damaged: replace the PSU. Normally, this SC is cancelled if you do SP5810 to cancel the SC fusing code. |
| Error code: | SC549 |
| Description: | Heating roller thermistor 2 error 3: Software - High Temperature. The thermistor detected a temperature over 250°C. |
| Causes: | • Do SP5810 to cancel the SC fusing code. • TRIAC short, AC drive board defective • VBCU defective |
| Remedy: | • TRIAC short • IOB defective • BICU defective • Fusing temperature control is erratic. Do SP5810 to cancel the SC fusing code. |
| Error code: | SC591 |
| Description: | Double-Feed Sensor Error |
| Causes: | The strength of the double-feed sensor LED light could not be calibrated within the prescribed range after three attempts. |
| Remedy: | • Sensor harness disconnected or broken • Physical obstruction (paper scrap) between the sensor pair (emitter/receiver) • One or both of the sensors are dirty (paper dust) |
| Error code: | SC592 |
| Description: | Cutter 1 home position error 2: Upper Tray The left home position switch remained on 300 ms after the cutter motor switched on. |
| Causes: | • Cutter motor 1 harness loose, broken, defective • Cutter motor overload due to physical obstruction • Cutter motor 1 defective |
| Error code: | SC593 |
| Description: | Decurler Unit Over Limit Error |
| Causes: | The over-limit sensor went on because the decurler unit has moved farther than the allowed distance (±13.85 mm). |
| Remedy: | • Adjust the distance • Cycle the machine off/on |
| Error code: | SC594 |
| Description: | Decurler Unit HP Error |
| Causes: | The decurler unit was not detected at its home position within 6 sec. |
| Remedy: | • HP sensor disconnected or broken • Sensor defective |
| Error code: | SC595 |
| Description: | TDCU Hardware Error |
| Causes: | A command was received from the TDCU due to a stepper motor error, FPGA configuration error, or FPGA power source error. |
| Remedy: | • TDCU harness disconnected or broken • TDCU board defective • Stepper motor(s) defective Note: The stepper motors directly controlled by the TDCU include: fusing motor, drum cleaning motor, development motor, drum motor, PTR motor, transfer timing motor. |
| Error code: | SC596 |
| Description: | Cutter 2 home position error 3: Upper Tray The home position switch remained off for 1 sec. after cutter motor 1 switched on. |
| Causes: | • Cutter motor 1 harness loose, broken, defective • Cutter motor 1 overload due to physical obstruction • Cutter motor 1 defective |
| Error code: | SC630 |
| Description: | RSS communication error. An error was detected in communication via RSS between the machine and the RSS center. Error occurred on a public line at the RSS terminal. |
| Remedy: | • No action required |
| Error code: | SC632 |
| Description: | Key/card counter device error 1. After 1 data frame is sent to the device, an ACK signal is not received within 100 ms, and is not received after 3 retries. |
| Causes: | • The serial line from the device to the copier is unstable, disconnected, or defective. |
| Remedy: | • The serial line from the device to the copier is unstable, disconnected, or defective. |
| Error code: | SC633 |
| Description: | Key/card counter device error 2. During communication with the device, the BICU received a break (Low) signal. |
| Causes: | • The serial line from the device to the copier is unstable, disconnected, or defective. |
| Remedy: | • The serial line from the device to the copier is unstable, disconnected, or defective. |
| Error code: | SC634 |
| Description: | Key/card counter device error 3. After installation of the device, a message alerts user to a backup RAM error. |
| Causes: | •X Counter device control board defective •X Backup battery of counter device defective |
| Remedy: | • Device control board defective • Device control board backup battery defective |
| Error code: | SC635 |
| Description: | Key/card counter device error 4. After installation of the device a message alerts user to a battery voltage abnormal error. |
| Causes: | • Device control board defective • Device control board backup battery defective |
| Remedy: | • Device control board defective • Device control board backup battery defective |
| Error code: | SC670 |
| Description: | Engine startup error. • Engine does not respond within 30 s after power ON. • Engine down detected suddenly during power ON and warmup. |
| Causes: | The engine failed to communicate with the firmware. Firmware update failure. |
| Remedy: | • BICU installation incorrect • BICU defective • Sudden communication reset occurred between the BICU and the controller. |
| Error code: | SC672 |
| Description: | GW controller startup error. • After power ON, the line between the GW controller and the operation panel did not open for normal operation. • After normal startup, communication with the GW controller stopped. |
| Causes: | • Controller stalled • Board installed incorrectly • Controller board defective • Operation panel connector loose, broken, or defective • Controller late |
| Remedy: | • GW Controller stalled • GW Controller installed incorrectly • GW Controller board defective • Operation panel harness disconnected or defective |
| Error code: | SC818 |
| Description: | Watchdog error. While the system program is running, a bus hold or interrupt program goes into an endless loop, preventing any other programs from executing. |
| Causes: | • System program defective; switch off/on, or change the controller firmware if the problem cannot be solved • Controller board defective • Replace the peripheral device |
| Remedy: | • System program defective; switch OFF/ON, or change the controller firmware if the problem cannot be solved • Controller board defective • Controller option malfunction |
| Error code: | SC819 |
| Description: | Fatal kernel error. Due to a control error, a RAM overflow occurred during system processing. One of the following messages was dis |
| Causes: | • Controller board defective |
| Remedy: | • System program defective • Controller board defective • Optional board defective • Replace controller firmware 0x696e init died 0x766d vm_pageout: Virtual Memory is full 4361 Cache Error NOTE: For more details about this SC code error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel. |
| Error code: | SC820 |
| Description: | Controller Error |
| Causes: | Unexpected error. |
| Remedy: | Cycle the machine off/on. |
| Error code: | SC821 |
| Description: | Self-diagnostic error 1: ASIC The ASIC provides the central point for the control of bus arbitration for CPU access, for option bus and SDRAM access, for SDRAM refresh, and for management of the internal bus gate. |
| Causes: | • ASIC (controller board defective) |
| Error code: | SC822 |
| Description: | Self-diagnostic error 2: HDD |
| Error code: | SC823 |
| Description: | USB/ Network Device Error An interface error in the USB connection or NIB connection occurs. |
| Causes: | • Controller board detective |
| Remedy: | 1. Replace the controller board. |
| Error code: | SC824 |
| Description: | Self-diagnostic error 4: NVRAM NVRAM device does not exist, NVRAM device is damaged, NVRAM socket damaged |
| Causes: | • Controller board detective |
| Remedy: | • NVRAM defective • Controller board defective • NVRAM backup battery exhausted • NVRAM socket damaged |
| Error code: | SC826 |
| Description: | Self-diagnostic Error: NVRAM (RTC Option) If this NVRAM is installed, the difference between the 1 second measurement of RTC and 1 second CPU timer exceeds the allowable limit. |
| Causes: | • RTC device error |
| Error code: | SC827 |
| Description: | On-Board Memory Check Error An on-board memory check error at power-on occurs. |
| Causes: | • Controller board detective |
| Remedy: | 1. Replace the controller board. |
| Error code: | SC828 |
| Description: | Self-diagnostic error 7: ROM • Measuring the CRC for the boot monitor and operating system program results in an error. • A check of the CRC value for ROMFS of the entire ROM area results in an error. |
| Causes: | A firmware type error or checksum error occurred. |
| Remedy: | • Software defective • Controller board defective • ROM defective NOTE: For more details about this SC 833, SC834 error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel. The additional error codes (0F30, 0F31, etc. are listed in the SMC report. |
| Error code: | SC829 |
| Description: | Self-diagnostic error 5: Optional RAM Verify error for optional RAM. |
| Causes: | • Make sure that the resident RAM is installed in the correct slot. • Make sure the optional RAM is installed in the correct slot (Slot 0) |
| Remedy: | 1. Turn the main switch off and on. 2. Replace the RAM DIMM. 3. Replace the controller board. |
| Error code: | SC838 |
| Description: | Self-diagnostic error: Clock generator CTL [2701] A verify error occurred when setting data was read from the clock generator via the I2C bus |
| Causes: | •X Defective clock generator •X Defective I2C bus •X Defective I2C port on the CPU |
| Remedy: | •X Replace the controller board. |
| Error code: | SC850 |
| Description: | Net I/F error. • Duplicate IP addresses. • Illegal IP address. • Driver unstable and cannot be used on the network. |
| Causes: | • IP address setting incorrect • Ethernet board defective • Controller board defective |
| Remedy: | • IP address setting incorrect • Ethernet board defective • Controller board defective |
| Error code: | SC851 |
| Description: | IEEE 1394 I/F error. Driver setting incorrect and cannot be used by the 1394 I/F. |
| Causes: | Driver setting incorrect and cannot be used by the 1394 I/F. |
| Remedy: | • NIB (PHY), LINK module defective; change the Interface Board • Controller board defective |
| Error code: | SC853 |
| Description: | Wireless LAN Error 1. During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth). |
| Causes: | During machine start-up, the machine can access the board that holds the wireless LAN (Bluetooth), but not access the wireless LAN card. |
| Remedy: | • Wireless LAN card missing (was removed) |
| Error code: | SC854 |
| Description: | Wireless LAN Error 2. During machine operation, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth). |
| Causes: | The board that holds the wireless LAN card (Bluetooth) could be accessed, but the wireless LAN card could not be accessed while the machine was operating. |
| Remedy: | • Wireless LAN card missing (was removed) |
| Error code: | SC855 |
| Description: | Wireless LAN error 3. An error was detected on the wireless LAN card (802.11b or Bluetooth). |
| Causes: | An error was detected for the wireless LAN card (802.11b or Bluetooth). |
| Remedy: | • Wireless LAN card defective • Wireless LAN card connection incorrect |
| Error code: | SC856 |
| Description: | Wireless LAN error 4. An error was detected on the wireless LAN card (802.11b or Bluetooth). |
| Causes: | An error was detected for the wireless LAN board (Bluetooth). |
| Remedy: | • Wireless LAN card defective • PCI connector (to the mother board) loose |
| Error code: | SC857 |
| Description: | USB I/F Error. The USB driver is not stable and caused an error. |
| Causes: | The USB driver is unstable and generated an error. |
| Remedy: | • Bad USB card connection • Replace the controller board |
| Error code: | SC860 |
| Description: | HDD startup error at main power ON. • HDD is connected but a driver error is detected. • The driver does not respond with the status of the HDD within 30 s. |
| Causes: | HDD is connected but a driver error is detected, or the driver did not respond with the status of the HDD within 30 s. |
| Remedy: | • HDD is not formatted • Label name input during formatting is corrupted; format the hard disk again • HDD is defective |
| Error code: | SC861 |
| Description: | HDD re-try failure. At power ON with the HDD detected, power supply to the HDD is interrupted, after the HDD is awakened from the sleep mode, the HDD is not ready within 30 s. |
| Causes: | At power on with the HDD detected, power supply to the HDD is interrupted, after the HDD is awakened from the sleep mode, the HDD is not ready within 30 s. |
| Remedy: | • Harness between HDD and board disconnected, defective • HDD power connector disconnected • HDD defective • Controller board defective |
| Error code: | SC863 |
| Description: | HDD data read failure. The data written to the HDD cannot be read normally, due to bad sectors generated during operation. |
| Causes: | The data written to the HDD cannot be read normally, due to bad sectors generated during operation. |
| Remedy: | • HDD defective Note: If the bad sectors are generated at the image partition, the bad sector information is written to NVRAM, and the next time the HDD is accessed, these bad sectors will not be accessed for read/write operation. |
| Error code: | SC864 |
| Description: | HDD data CRC error. During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD. |
| Causes: | During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD. |
| Remedy: | • HDD defective |
| Error code: | SC865 |
| Description: | HDD access error. HDD responded to an error during operation for a condition other than those for SC863, 864. |
| Causes: | HDD responded to an error during operation for a condition other than those for SC863, 864. |
| Remedy: | • HDD defective. |
| Error code: | SC866 |
| Description: | SD card error 1: Confirmation. The machine detects an electronic license error in the application on the SD card in the controller slot immediately after the machine is turned ON. The program on the SD card contains electronic confirmation license data. If the program does not contain this license data, or if the result of the check shows that the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed. |
| Causes: | The machine detected an electronic license error in the application on the SD card in the controller slot immediately after the machine was turned on. Note: • The program on the SD card contains electronic confirmation license data. • If the program does not contain this license data, or if the result of the check shows that the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed. |
| Remedy: | • Program missing from the SD card • Download the correct program for the machine to the SD card |
| Error code: | SC867 |
| Description: | SD card error 2: SD card removed. The SD card in the boot slot when the machine was turned on was removed while the machine was ON. |
| Causes: | An application SD card has been removed from the slot (mount point of /mnt/sd*). |
| Remedy: | • Insert the SD card, then turn the machine OFF and ON. |
| Error code: | SC868 |
| Description: | SD card error 3: SD card access. An error occurred while an SD card was used. |
| Causes: | • SD card defective • SD controller defective |
| Remedy: | • SD card not inserted correctly • SD card defective • Controller board defective Note: If you want to try to reformat the SD card, use SD Formatter Ver 1.1. |
| Error code: | SC870 |
| Description: | Address book data error. Address book data on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network. The address book data cannot be read from the HDD or SD card where it is stored, or the data read from the media is defective. |
| Causes: | • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (NVRAM was replaced individually without formatting the Address Book) • Address Book storage device (SD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
| Remedy: | • Software defective. Turn the machine OFF/ON. If this is not the solution for the problem, then replace the controller firmware. • HDD defective. More Details • Do SP5846 050 (UCS (User info control service) Settings – Initialize all Directory Info.) to reset all address book data. • Reset the user information with SP5832 006 (HDD Formatting– User Information). • Replace the HDDs. • Boot the machine from the SD card. |
| Error code: | SC873 |
| Description: | HDD mail send data error. An error was detected on the HDD immediately after the machine was turned ON, or power was turned OFF while the machine used the HDD. |
| Causes: | An error was detected on the HDD immediately after the machine was turned on, or power was turned of while the machine was using the HDD. |
| Remedy: | • Do SP5832-007 (Format HDD – Mail TX Data) to initialize the HDD. • Replace the HDD |
| Error code: | SC874 |
| Description: | Delete All error 1: HDD. A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit (B735) running from an SD card. |
| Causes: | • Error detected in HDD data delete program • Error detected in NVRAM data delete program • The "Delete All" option was not set |
| Remedy: | • Turn the main switch OFF/ON and try the operation again. • Install the Data Overwrite Security Unit again. For more, see section “1. Installation”. • HDD defective |
| Error code: | SC875 |
| Description: | Delete All error 2: Data area. An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card. |
| Causes: | • HDD logical formatting failed. • The modules failed to erase data. |
| Remedy: | • Turn the main switch OFF/ON and try the operation again. |
| Error code: | SC880 |
| Description: | File Format Converter (MLB) error. A request to get access to the MLB was not answered within the specified time. |
| Causes: | • MLB defective, replace the MLB |
| Remedy: | • MLB defective, replace the MLB |
| Error code: | SC900 |
| Description: | Electrical total counter error. The total counter contains something that is not a number. |
| Causes: | The total counter contains data that is not a number. |
| Remedy: | • NVRAM incorrect type • NVRAM defective • NVRAM data scrambled • Unexpected error from external source |
| Error code: | SC901 |
| Description: | Mechanical Counter 1 error Mechanical Counter 1 was not set correctly at power on, or the operator disconnected the counter while machine was operating. |
| Causes: | • Mechanical Counter 1 connection loose or defective • Mechanical Counter 1 defective |
| Error code: | SC910 … SC914 |
| Description: | External controller error |
| Error code: | SC919 |
| Description: | External controller (E-7000) down. An internal application error was detected and operation cannot continue. |
| Causes: | While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected. |
| Remedy: | • Software defective; turn the machine OFF/ON, or change the controller firmware • Insufficient memory |
| Error code: | SC920 |
| Description: | Printer error 1. An internal application error was detected and operation cannot continue. |
| Causes: | • The software’s bug • Unexpected hardware configuration such as insufficient memory |
| Remedy: | • Software defective; turn the machine OFF/ON, or change the controller firmware • Insufficient memory |
| Error code: | SC921 |
| Description: | Printer error 2. When the application started, the necessary font was not on the SD card. |
| Causes: | When the printer application started, the specified font could not be found on the SD card. |
| Remedy: | • Font not on the SC card |
| Error code: | SC925 |
| Description: | Net File function error. The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue. The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Web services, and other network functions cannot be used. HDD status codes are displayed below: |
| Causes: | The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue. The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Web services, and other network functions cannot be used. HDD status codes are displayed below the SC code: |
| Remedy: | Procedure 1 If the machine shows SC codes for HDD errors (SC860 ~ SC865) with SC 925, do the recovery procedures for SC860 ~ SC865. Procedure 2 If the machine does not show one of the five HDD errors (SC860 ~ SC865), turn the machine power OFF and ON. If this is not the solution for the problem, then initialize the NetFile partition on the HDD with SP5832-011 (HDD Formatting). NetFiles: Jobs printed from the document server using a PC and DeskTopBinder • Before you initialize the NetFile partition on the HDD, tell the customer that: • Received faxes on the delivery server will be erased • All captured documents will be erased • DeskTopBinder job history will be erased • Documents on the document server, and scanned documents, will not be erased. • The first time that the network gets access to the machine, the management information must be configured again (this will use a lot of time). Before you initialize the Netfile partition with SP5832-011, do these steps: 1. Go into the User Tools mode and do “Delivery Settings” to print all received fax documents that are scheduled for delivery. Then erase them. 2. In the User Tools mode, do Document Management> Batch Delete Transfer Documents. 3. Do SP5832-011, then turn the machine power OFF and ON. Procedure 3 If “Procedure 2” is not the solution for the problem, do SP5832-001 (HDD Formatting – All), then turn the machine power OFF and ON. SP5832-001 erases all document and address book data on the hard disks. Ask the customer before you do this SP code. Procedure 4 If “Procedure 3” is not the solution for the problem, replace the HDD. |
| Error code: | SC954 |
| Description: | Printer Image Setting Error The IPU did not issue the signal required to start image processing for the printing mode within 60 s after the paper stops for registration. |
| Causes: | • Software defective • Replace the software (all firmware modules). • IPU defective |
| Error code: | SC955 |
| Description: | Memory Setting Error The settings that are required for image processing using the memory are not sent from the IPU. |
| Causes: | • Software bug • Hard disk unit defective • Controller defective • MCU defective • IPU defective |
| Error code: | SC964 |
| Description: | Scanner Start Error During scanned image processing, another command to start scanning was received. |
| Causes: | • Software bug |
| Error code: | SC965 |
| Description: | Print start signal error 1 The printer received another print start signal after print job has already started. |
| Causes: | • Main machine firmware defective • Replace all firmware modules on the main machine |
| Error code: | SC967 |
| Description: | Print start signal error 2 The printer received another print start signal after print job has already started. |
| Causes: | • Main machine firmware defective • Replace all firmware modules on the main machine • IOB defective |
| Error code: | SC990 |
| Description: | Software error 2 The software performs an unexpected function and the program cannot continue. |
| Causes: | An unexpected operation was encountered by the software. |
| Remedy: | • Software defective, re-boot 1) Execute SP7403 or print an SMC Report (SP5990) to read the history of the 10 most recent logged errors. 2) If you press the zero key on the operation panel with the SP selection menu displayed, you will see detailed information about the recently logged SC990 or SC991, including the software file name, line number, and so on. 1) is the recommended method, because another SC could write over the information for the previous SC. |
| Error code: | SC991 |
| Description: | Software error 3 The software performs an unexpected function and the program cannot continue. However, unlike SC990, recovery processing allows the program to continue. |
| Causes: | The software peformed an unexpected function and the program cannot continue. Recovery processing allows the program to continue. |
| Remedy: | • Software defective, re-boot 1) Execute SP7403 or print an SMC Report (SP5990) to read the history of the 10 most recent logged errors. 2) If you press the zero key on the operation panel with the SP selection menu displayed, you will see detailed information about the recently logged SC990 or SC991, including the software file name, line number, and so on. 1) is the recommended method, because another SC could write over the information for the previous SC. |
| Error code: | SC992 |
| Description: | Software error 4: Undefined An error not controlled by the system occurred (the error does not come under any other SC code). |
| Causes: | An error not controlled by the system occurred (the error does not come under any other SC code). |
| Remedy: | • Software defective • Turn the machine power OFF and ON. The machine cannot be used until this error is cleared. |
| Error code: | SC997 |
| Description: | Cannot select application function An application does not start after the user pushed the correct key on the operation panel. |
| Causes: | An application did not start after pressing the appropriate key on the operation panel. |
| Remedy: | • Software bug • A RAM or DIMM option necessary for the application is not installed or not installed correctly. |
| Error code: | SC998 |
| Description: | Application cannot start Register processing does not operate for an application within 60 s after the machine power is turned ON. No applications not start correctly, and all end abnormally. |
| Causes: | Register processing did not execute for an application within 60 sec. after the machine was switched on. No applications start correctly, and all end abnormally. |
| Remedy: | • Software bug • A RAM or DIMM option necessary for the application is not installed or not installed correctly. |
