Samsung CLP-600N
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Скорость печати
A4
20
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Тип устройства |
Принтер |
Цветность печати |
цветная |
Размещение |
настольный |
Макс. формат |
A4 |
Телефон |
|
Печать фотографий |
|
Копир |
|
Сканер |
|
Факс |
|
Принтер |
|
Двусторонняя печать |
|
Прямая печать |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 600 |
| По X | 2 400 |
Скорость ч/б печати |
|
| A4 | 20 |
Время выхода первого отпечатка |
|
| Цветн, | 20 |
Расходные материалы |
|
Ресурс цветного картриджа/тонера |
4 000 |
Ресурс ч/б картриджа/тонера |
4 000 |
Количество картриджей |
4 |
Печать на: |
|
| Конвертах |
|
| Карточках |
|
| Этикетках |
|
| Матовой бумаге |
|
| Глянцевой бумаге |
|
| Пленках |
|
| CD/DVD |
|
| Рулоне |
|
| Фотобумаге |
|
Плотность бумаги |
|
| Максимальная | 163 |
| Минимальная | 60 |
Телефон |
|
Автоответчик |
|
Стандарт DECT |
|
Спикерфон |
|
Caller ID |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Языки управления |
|
| PCL 5e |
|
| PPDS |
|
| PostScript |
|
| PostScript 2 |
|
|
|
|
| PostScript 3 |
|
| PCL 5c |
|
| PCL 6 |
|
Лотки |
|
Подача бумаги |
|
| Максимальная | 850 |
| Стандартная | 350 |
Вывод бумаги |
|
| Стандартный | 250 |
Финишер |
|
Степлер |
|
Сортер |
|
Электронная сортировка |
|
Брошюровщик |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
Версия USB |
2,0 |
Устройство для чтения карт памяти |
|
LPT |
|
Веб-интерфейс |
|
FireWire (IEEE 1394) |
|
RS-232 |
|
Инфракрасный порт |
|
Wi-Fi |
|
Bluetooth |
|
USB |
|
Ethernet (RJ-45) |
|
Память/Процессор |
|
Объем памяти |
32 |
Макс, объем памяти |
32 |
Процессор |
MIPS |
Частота процессора |
250 |
Дополнительная информация |
|
Мин. системные требования |
|
Поддержка ОС |
|
| Windows |
|
| Linux |
|
| Mac OS |
|
| DOS |
|
Уровень шума |
|
| При работе | 50 |
| В режиме ожидания | 30 |
Габариты |
|
Высота |
445 |
Ширина |
465 |
Глубина |
465 |
Вес |
29 |
Модули
TOP COVER
Guide Paper
Pick Up
MAIN
Main Drive
MAIN FRAME
Right Cover
Cassette Unit
Fuser
Front Cover
Base Frame
MPF
Детали Front Cover
| Деталь: | COVER- M TOP |
| Парткод: | JC63-00574A |
| Деталь: | COVER-_M_STACKER |
| Парткод: | JC63-00588A |
| Деталь: | COVER- M VENT |
| Парткод: | JC63-00590A |
| Деталь: | COVER-_M_EXIT |
| Парткод: | JC63-00578A |
| Деталь: | COVER- M AIR DUCT |
| Парткод: | JC63-00579A |
| Деталь: | COVER-_M_ACTUATOR SENSOR |
| Парткод: | JC63-00580A |
| Деталь: | LEVER- M ACTUATOR SENSOR |
| Парткод: | JC66-00798A |
| Деталь: | SPRING ETC-TR L HAWK |
| Парткод: | JC61-00047A |
| Деталь: | MEA UNIT-GUIDE PAPER |
| Парткод: | JC97-02404A |
| Деталь: | GUIDE- M SCT PAPER UPPER |
| Парткод: | JC61-01013A |
| Деталь: | ROLLER-SHAFT FEED |
| Парткод: | JC66-00903A |
| Деталь: | PMO-BUSHING P/U,MP |
| Парткод: | JC72-41364A |
| Деталь: | PLATE-P-GND FEED ROLLER |
| Парткод: | JC61-01021A |
| Деталь: | GEAR- M FEED |
| Парткод: | JC66-00773A |
| Деталь: | GUIDE-_M_SCT PAPER LOWER |
| Парткод: | JC61-01149A |
| Деталь: | COVER-M-REGI FRAME |
| Парткод: | JC63-00573A |
| Деталь: | FRAME-P-REGI |
| Парткод: | JC61-01023A |
| Деталь: | SPRING ETC-BUSH REGI |
| Парткод: | JC61-01272A |
| Деталь: | Bush-M-Roller Regi U |
| Парткод: | JC61-00669A |
| Деталь: | PMO-Actuator Regishutter |
| Парткод: | JC72-00998A |
| Деталь: | Shaft-Regi Upper |
| Парткод: | JC66-00446A |
| Деталь: | CAP-M_BUSHING ACTUATOR |
| Парткод: | JC67-00047A |
| Деталь: | ROLLER-M REGI IDLE S25 |
| Парткод: | JC66-00648A |
| Деталь: | Roller-M_Regi Idle L25 |
| Парткод: | JC66-00647A |
| Деталь: | Spring-TS |
| Парткод: | 6107-001158 |
| Деталь: | HOLDER-M-SENSOR |
| Парткод: | JC61-01040A |
| Деталь: | HOLDER-M-SENSOR |
| Парткод: | JC61-01094A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | ROLLER-REGI LOWER |
| Парткод: | JC66-00765A |
| Деталь: | BUSH-_M_ROLLER REGI L |
| Парткод: | JC61-01146A |
| Деталь: | HOLDER- M GEAR REGI |
| Парткод: | JC61-01128A |
| Деталь: | GEAR-M-REGI |
| Парткод: | JC66-00774A |
| Деталь: | FRAME-M-PICK UP |
| Парткод: | JC61-01039A |
| Деталь: | PBA SUB-FCF_EMP_SENSOR |
| Парткод: | JC92-01661A |
| Деталь: | PLATE-P-GROUND REGI |
| Парткод: | JC61-01049A |
| Деталь: | PMO-Actuator Empty |
| Парткод: | JC72-00719A |
| Деталь: | SPRING ETC-EXTENSION |
| Парткод: | JC61-70950A |
| Деталь: | HOUSING-M-PICK UP |
| Парткод: | JC61-01038A |
| Деталь: | Rubber-Pick Up MP |
| Парткод: | JC73-00224A |
| Цена: | 410 ₽ |
| Деталь: | Shaft-Pick Up |
| Парткод: | JC66-00758A |
| Деталь: | GEAR-M-PICK UP |
| Парткод: | JC66-00761A |
| Деталь: | GUIDE-P-GEAR BRACKET |
| Парткод: | JC61-01029A |
| Деталь: | GEAR-M-MAIN |
| Парткод: | JC66-00759A |
| Деталь: | GEAR-M-PICK UP IDLE |
| Парткод: | JC66-00763A |
| Деталь: | GEAR-M-PICK UP IDLE 2 |
| Парткод: | JC66-00762A |
| Деталь: | GEAR-M-MP IDLE |
| Парткод: | JC66-00760A |
| Деталь: | Solenoid-Main |
| Парткод: | JC33-00012B |
| Деталь: | MEA UNIT-FRAME BASE |
| Парткод: | JC97-02187A |
| Деталь: | MEA UNIT-FRAME MAIN |
| Парткод: | JC97-02151A |
| Деталь: | COVER-_M_GEAR |
| Парткод: | JC63-00585A |
| Деталь: | FRAME-P-FRONT |
| Парткод: | JC61-01002A |
| Деталь: | GUIDE-_M_BUSH HARNESS S |
| Парткод: | JC61-01012A |
| Деталь: | FRAME-P-BOTTOM |
| Парткод: | JC61-01004A |
| Деталь: | BRACKET-P-MPF |
| Парткод: | JC61-01046A |
| Деталь: | BRACKET-P-SHIELD SMPS |
| Парткод: | JC61-00998A |
| Деталь: | HOUSING-_M_MIDDLE PART |
| Парткод: | JC61-01018A |
| Деталь: | CBF HARNESS-MAIN SMPS |
| Парткод: | JC39-00418A |
| Деталь: | HVPS-DAVINCI |
| Парткод: | JC44-00098A |
| Цена: | 10 100 ₽ |
| Деталь: | UNIT-LSU DAVINCI |
| Парткод: | JC59-00022A |
| Цена: | 15 700 ₽ |
| Деталь: | ELA UNIT-DUCT LEFT |
| Парткод: | JC96-03437A |
| Деталь: | FRAME-P-REAR |
| Парткод: | JC61-01003A |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-001093 |
| Деталь: | PBA SUB-DRIVER |
| Парткод: | JC92-01659A |
| Деталь: | CBF HARNESS-DRIVER |
| Парткод: | JC39-00426A |
| Деталь: | BRACKET-P-CONT LOWER |
| Парткод: | JC61-00991A |
| Деталь: | PBA MAIN-DAVINCI |
| Парткод: | JC92-01655A |
| Деталь: | ELA HOU-NPC3 HIGH |
| Парткод: | JC96-03588A |
| Деталь: | MEA UNIT-BRKT CONN |
| Парткод: | JC97-02400A |
| Деталь: | ELA UNIT-DRIVE MAIN |
| Парткод: | JC96-03369A |
| Деталь: | ELA UNIT-DEVE BK SET |
| Парткод: | JC96-03441A |
| Деталь: | ELA UNIT-DEVE C_SET |
| Парткод: | JC96-03443A |
| Деталь: | ELA UNIT-DEVE M SET |
| Парткод: | JC96-03445A |
| Деталь: | ELA UNIT-DEVE Y_SET |
| Парткод: | JC96-03447A |
| Деталь: | ELA UNIT-PTB SET |
| Парткод: | JC96-03449A |
| Деталь: | ELA HOU-COVER F LCD |
| Парткод: | JC96-03490A |
| Деталь: | MEA HOU-COVER LEFT |
| Парткод: | JC97-02190B |
| Деталь: | MEA HOU-COVER TOP |
| Парткод: | JC97-02194A |
| Деталь: | MEA HOU-COVER REAR |
| Парткод: | JC97-02242A |
| Деталь: | MEA HOU-COVER RIGHT |
| Парткод: | JC97-02191A |
| Деталь: | MEA UNIT-CASSETTE |
| Парткод: | JC97-02192A |
| Цена: | 2 400 ₽ |
| Деталь: | PIN-SPRING |
| Парткод: | 6043-001097 |
| Деталь: | GEAR-FUSER DRIVE 2 Z30 |
| Парткод: | JC66-00472A |
| Деталь: | Ring-E |
| Парткод: | 6044-000231 |
| Деталь: | ELA UNIT-DUCT SMPS |
| Парткод: | JC96-03933A |
| Деталь: | DUCT- M FUSER LOWER |
| Парткод: | JC67-00072A |
| Деталь: | DUCT-_M_FUSER UPPER |
| Парткод: | JC67-00073A |
| Деталь: | FAN-DC INVERTER |
| Парткод: | JC31-00012C |
| Деталь: | SPONGE-DUCT |
| Парткод: | JC72-01368A |
| Деталь: | BRACKET-_M_NPC |
| Парткод: | JC61-00809A |
| Деталь: | IPR-SHIELD SIMM |
| Парткод: | JC70-10234A |
| Деталь: | BRACKET-P-CONT UPPER |
| Парткод: | JC61-00992A |
| Деталь: | COVER-M-LEFT |
| Парткод: | JC63-00576B |
| Деталь: | HANDLE- M COVER LEFT |
| Парткод: | JC64-00176A |
| Деталь: | COVER-_M_REAR |
| Парткод: | JC63-00575A |
| Деталь: | COVER-M MAIN REAR DUMMY |
| Парткод: | JC63-00192B |
| Деталь: | DUCT-FAN SMPS |
| Парткод: | JC67-00161A |
| Деталь: | BRACKET-P-MAIN FRONT |
| Парткод: | JC61-00996A |
| Деталь: | GEAR- M IDLE Z41 |
| Парткод: | JC66-00749A |
| Деталь: | GEAR-_M_IDLE_Z43 |
| Парткод: | JC66-00750A |
| Деталь: | LINK-P-ITB |
| Парткод: | JC66-00755A |
| Деталь: | GEAR-_M_IDLE_Z79 |
| Парткод: | JC66-00753A |
| Деталь: | GEAR- M RDCN FU Z52/Z22 |
| Парткод: | JC66-00751A |
| Деталь: | GEAR-DEVE IDLE_Z41 |
| Парткод: | JC66-00466A |
| Деталь: | GEAR-IDLE Z51 |
| Парткод: | JC66-00473A |
| Деталь: | GEAR-DEVE RDCN |
| Парткод: | JC66-00468A |
| Деталь: | SHAFT-FUSER DRIVE |
| Парткод: | JC66-00831A |
| Деталь: | Washer-Plain |
| Парткод: | 6031-000022 |
| Деталь: | Washer-Plain |
| Парткод: | 6031-000023 |
| Деталь: | Washer-Plain |
| Парткод: | 6031-001051 |
| Деталь: | Washer-Plain |
| Парткод: | 6031-001490 |
| Деталь: | Washer-Plain |
| Парткод: | 6031-001534 |
| Деталь: | Washer-Plain |
| Парткод: | 6031-001002 |
| Деталь: | SHAFT-DEVE K CLUTCH |
| Парткод: | JC66-01197A |
| Деталь: | MEP-CLUTCH SPRING |
| Парткод: | JC47-00006C |
| Деталь: | SHAFT-DEVE DRV KMCY |
| Парткод: | JC66-00834A |
| Деталь: | SHAFT-FEED DRIVE |
| Парткод: | JC66-00833A |
| Деталь: | GEAR- M RDCN FEED1 Z69 |
| Парткод: | JC66-00754A |
| Деталь: | BRACKET-P-MAIN REAR |
| Парткод: | JC61-00997A |
| Деталь: | MOTOR DC-DEVE DRIVE |
| Парткод: | JC31-00041A |
| Цена: | 4 200 ₽ |
| Деталь: | PIN-PARALLEL(KEY) |
| Парткод: | 6043-001115 |
| Деталь: | MOTOR STEP-FU, DRIVE |
| Парткод: | JC31-00037C |
| Деталь: | GEAR-FEED DRIVE_Z37 |
| Парткод: | JC66-00470A |
| Деталь: | GEAR- M OPC DRV2 Z21 |
| Парткод: | JC66-00746A |
| Деталь: | GEAR-M_DEVE DRV2_Z21 |
| Парткод: | JC66-00746B |
| Деталь: | Spring-ES |
| Парткод: | 6107-001214 |
| Деталь: | Spring-ES |
| Парткод: | 6107-001269 |
| Деталь: | ICT-PIN ADF |
| Парткод: | JB70-00168A |
| Деталь: | Washer-Plain |
| Парткод: | 6031-001255 |
| Деталь: | BUSH-8/5 |
| Парткод: | JC61-00426A |
| Деталь: | Screw-Taptite |
| Парткод: | 6002-000308 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000261 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000264 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000282 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000301 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-001086 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-001256 |
| Деталь: | BUSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | LABEL(P)-BAR CODE |
| Парткод: | JF68-10532B |
| Деталь: | FRAME-_M_MAIN |
| Парткод: | JC61-01001A |
| Деталь: | COVER- M EXIT GUIDE |
| Парткод: | JC63-00577A |
| Деталь: | ELA UNIT-HOLDER AC |
| Парткод: | JC96-03772A |
| Деталь: | CBF HARNESS-EXIT |
| Парткод: | JC39-00424A |
| Деталь: | GUIDE-_M_RAIL FRONT |
| Парткод: | JC61-01007A |
| Деталь: | GUIDE- M RAIL REAR |
| Парткод: | JC61-01006A |
| Деталь: | PBA SUB-TEMP |
| Парткод: | JC92-01789A |
| Деталь: | ELA UNIT-BRKT DRAW |
| Парткод: | JC96-03771A |
| Деталь: | LABEL(R)-BK |
| Парткод: | JC68-01503A |
| Деталь: | LABEL(R)-C |
| Парткод: | JC68-01504A |
| Деталь: | LABEL(R)-M |
| Парткод: | JC68-01505A |
| Деталь: | LABEL(R)-Y |
| Парткод: | JC68-01506A |
| Деталь: | LINK-_M_REAR 1 |
| Парткод: | JC66-00776A |
| Деталь: | ELA UNIT-DEVE CRUM |
| Парткод: | JC96-03366A |
| Деталь: | MEA UNIT-PTB TERMINAL |
| Парткод: | JC97-02402A |
| Деталь: | SPRING ETC-OPC F |
| Парткод: | JC61-01264A |
| Деталь: | MEA UNIT-DEV TERMINAL |
| Парткод: | JC97-02403A |
| Деталь: | HOLDER- M PTB LOCKER |
| Парткод: | JC61-01019A |
| Деталь: | SPRING ETC-PTB F |
| Парткод: | JC61-01265A |
| Деталь: | SPRING ETC-PTB R |
| Парткод: | JC61-01266A |
| Деталь: | ELECTRODE-HV D |
| Парткод: | JC70-00506A |
| Деталь: | CBF HARNESS-GND ZENER |
| Парткод: | JC39-00509A |
| Деталь: | ELA UNIT-DUCT REAR |
| Парткод: | JC96-04239A |
| Деталь: | HOUSING- M SENSOR EXIT |
| Парткод: | JC61-01077A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001154 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001264 |
| Деталь: | CBF HARNESS-MP_1 |
| Парткод: | JC39-00428A |
| Деталь: | PLATE-P-GROUND FUSER |
| Парткод: | JC61-01020A |
| Деталь: | CBF HARNESS-100M_GND |
| Парткод: | JC39-00302A |
| Деталь: | SPRING ETC-OPC R |
| Парткод: | JC61-01267A |
| Деталь: | PLATE-P-GROUND OPC |
| Парткод: | JC61-01014A |
| Деталь: | PLATE-P-GROUND DRIVE |
| Парткод: | JC61-01015A |
| Деталь: | PBA SUB-DEVE_CRUM_IF |
| Парткод: | JC92-01671A |
| Деталь: | COVER- M DEVE CRUM BD |
| Парткод: | JC63-00571A |
| Деталь: | GUIDE- M PTB TERMINAL |
| Парткод: | JC61-01011A |
| Деталь: | ELECTRODE-HV F |
| Парткод: | JC70-00508A |
| Деталь: | GUIDE- M TERMINAL CH |
| Парткод: | JC61-01010A |
| Деталь: | MEA Unit-Terminal:TR |
| Парткод: | JC97-01401A |
| Деталь: | ELECTRODE-HV E |
| Парткод: | JC70-00513A |
| Деталь: | GUIDE-_M_TERMINAL UPPER |
| Парткод: | JC61-01008A |
| Деталь: | ELECTRODE-HV C |
| Парткод: | JC70-00505A |
| Деталь: | ELECTRODE-HV B |
| Парткод: | JC70-00504A |
| Деталь: | ELECTRODE-HV A |
| Парткод: | JC70-00503A |
| Деталь: | GUIDE-_M_TERMINAL LOWER |
| Парткод: | JC61-01009A |
| Деталь: | HOLDER- M SWITCH |
| Парткод: | JC61-01061A |
| Деталь: | PLATE-S/W DUPLEX |
| Парткод: | JC61-00707A |
| Деталь: | CBF HARNESS-SWITCH |
| Парткод: | JC39-00454A |
| Деталь: | DUCT-_M_FUSER FAN |
| Парткод: | JC67-00074A |
| Деталь: | COVER- M RIGHT |
| Парткод: | JC63-00589A |
| Деталь: | MEA UNIT-COVER MPF |
| Парткод: | JC97-02405A |
| Деталь: | HANDLE- M COVER R |
| Парткод: | JC64-00179A |
| Деталь: | BRACKET-P-COVER LOCK |
| Парткод: | JC61-01050A |
| Деталь: | Spring-TS |
| Парткод: | 6107-001206 |
| Деталь: | HOLDER-_M_UPPER R |
| Парткод: | JC61-01057A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001194 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001247 |
| Деталь: | GUIDE- M SUPPORTER UPPER |
| Парткод: | JC61-01053A |
| Деталь: | PMO-COVER DUP LOCKER R |
| Парткод: | JC72-01082A |
| Деталь: | LOCKER- M PTB REAR |
| Парткод: | JC64-00178A |
| Деталь: | HOLDER-_M_UPPER F |
| Парткод: | JC61-01058A |
| Деталь: | PMO-COVER DUP LOCKER F |
| Парткод: | JC72-01081A |
| Деталь: | LOCKER-_M_PTB FRONT |
| Парткод: | JC64-00177A |
| Деталь: | BRACKET-P-PTB LOCK |
| Парткод: | JC61-01051A |
| Деталь: | HOLDER-_M_LOWER R |
| Парткод: | JC61-01055A |
| Деталь: | GUIDE- M SUPPORTER LOWER |
| Парткод: | JC61-01052A |
| Деталь: | HOLDER-_M_LINK |
| Парткод: | JC61-01125A |
| Деталь: | LINK- M REAR 2 |
| Парткод: | JC66-00777A |
| Деталь: | SHAFT-HINGE LINK |
| Парткод: | JC66-00835A |
| Деталь: | HOLDER- M LOWER F |
| Парткод: | JC61-01056A |
| Деталь: | LINK-_M_FRONT |
| Парткод: | JC66-00778A |
| Деталь: | COVER- M MP |
| Парткод: | JC63-00584A |
| Деталь: | COVER-_M_INNER MP |
| Парткод: | JC63-00586A |
| Деталь: | GUIDE- M SIDE MP L |
| Парткод: | JC61-01043A |
| Деталь: | GUIDE-_M_SIDE MP R |
| Парткод: | JC61-01042A |
| Деталь: | PMO-TRAY EXIT MP |
| Парткод: | JC72-00778B |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | TRAY- M LINK MP L |
| Парткод: | JC63-00587A |
| Деталь: | LABEL(R)-HEIGHT MP |
| Парткод: | JC68-01528A |
| Деталь: | FRAME-M-CASSETTE |
| Парткод: | JC61-01022A |
| Деталь: | COVER-M-CASSETTE |
| Парткод: | JC63-00572A |
| Деталь: | Spring Etc-Locker,Plate |
| Парткод: | JG61-70531A |
| Деталь: | PMO-Locker Plate |
| Парткод: | JC72-01073A |
| Деталь: | GUIDE-M-FRONT CASSETTE |
| Парткод: | JC61-01024A |
| Деталь: | STOPPER-M-GUIDE SIDE |
| Парткод: | JC61-01037A |
| Деталь: | GUIDE-M-REAR |
| Парткод: | JC61-01026A |
| Деталь: | LABEL(R)-CASSETTE |
| Парткод: | JC68-01527A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001200 |
| Деталь: | PLATE-P-KNOCK UP |
| Парткод: | JC61-01030A |
| Деталь: | PLATE-KNOCK UP PAD |
| Парткод: | JC61-01129A |
| Деталь: | GUIDE-P-SIDE LEFT |
| Парткод: | JC61-01027A |
| Деталь: | BUSH-M-FINGER,F |
| Парткод: | JC61-00653A |
| Деталь: | COVER- M GUIDE SIDE L |
| Парткод: | JC63-00609A |
| Деталь: | GUIDE-M-SIDE LOCK |
| Парткод: | JC61-01025A |
| Деталь: | PLATE-P-FINGER LEFT |
| Парткод: | JC61-01031A |
| Деталь: | GUIDE-P-SIDE RIGHT |
| Парткод: | JC61-01028A |
| Деталь: | PLATE-P-FINGER RIGHT |
| Парткод: | JC61-01032A |
| Деталь: | COVER-_M_EXIT ROLLER |
| Парткод: | JC63-00594A |
| Деталь: | MEC-Brush Antistatic |
| Парткод: | JC75-00095A |
| Деталь: | GROUND-P-COVER EXIT |
| Парткод: | JC63-00837A |
| Деталь: | GUIDE- M DUPLEX |
| Парткод: | JC61-01064A |
| Деталь: | Spring ETC-Actuator |
| Парткод: | JC61-01271A |
| Деталь: | LEVER- M ACTUATOR EXIT |
| Парткод: | JC66-00784A |
| Деталь: | ROLLER-EXIT |
| Парткод: | JC66-00783A |
| Деталь: | BUSH-6_D |
| Парткод: | JC61-00423A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | GEAR-_M_EXIT |
| Парткод: | JC66-00782A |
| Деталь: | HOLDER-EXIT(MC) |
| Парткод: | JC61-00547A |
| Деталь: | PMO-Roller FD F |
| Парткод: | JC72-41007A |
| Деталь: | Spring Etc-Exit Roll FD |
| Парткод: | JC61-70911A |
| Деталь: | GUIDE-_M_OUTPUT |
| Парткод: | JC61-01065A |
| Деталь: | ROLLER-EXIT IDLE |
| Парткод: | JC66-00608A |
| Деталь: | PEX-ROLLER EXIT F_UP |
| Парткод: | JC72-20901A |
| Деталь: | FRAME- M UPPER FUSER |
| Парткод: | JC61-01062A |
| Деталь: | THERMOSTAT |
| Парткод: | 4712-001027 |
| Деталь: | ELECTRODE-P-TERMINAL L |
| Парткод: | JC70-00488A |
| Деталь: | ELECTRODE-P-TERMINAL R |
| Парткод: | JC70-00489A |
| Деталь: | CBF HARNESS-FUSER1 |
| Парткод: | JC39-00506A |
| Деталь: | CBF HARNESS-FUSER2 |
| Парткод: | JC39-00444A |
| Деталь: | PBA SUB-NEW FUSER |
| Парткод: | JC92-01752A |
| Деталь: | GEAR-_M_EXIT IDLE |
| Парткод: | JC66-00781A |
| Деталь: | BRACKET-P-IDLE GEAR |
| Парткод: | JC61-01070A |
| Деталь: | GROUND-P-FUSER B |
| Парткод: | JC63-00647A |
| Деталь: | GROUND-P-FUSER BALL |
| Парткод: | JC63-00648A |
| Деталь: | COVER-M-CARBON BRUSH |
| Парткод: | JC63-00643A |
| Деталь: | BRUSH-CARBON |
| Парткод: | JC67-00104A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001172 |
| Деталь: | THERMISTOR-NTC ASSY |
| Парткод: | 1404-001359 |
| Деталь: | ROLLER-HEAT |
| Парткод: | JC66-00799A |
| Деталь: | Bearing-Ball |
| Парткод: | 6601-001340 |
| Деталь: | BUSH-_M_BALL BEARING |
| Парткод: | JC61-01144A |
| Деталь: | GEAR- M CAP |
| Парткод: | JC66-00780A |
| Деталь: | Roller-Pressure |
| Парткод: | JC66-00800A |
| Деталь: | CAP- M END |
| Парткод: | JC67-00071A |
| Деталь: | HOLDER-M-SPRING PR |
| Парткод: | JC61-01176A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001248 |
| Деталь: | Bearing-Ball |
| Парткод: | 6601-001341 |
| Деталь: | HOLDER- M FUSER GEAR |
| Парткод: | JC61-01126A |
| Деталь: | LABEL(P)-CAUTION HOT |
| Парткод: | JC68-01581A |
| Деталь: | COVER- M SIDE L |
| Парткод: | JC63-00592A |
| Деталь: | COVER-_M_SIDE R |
| Парткод: | JC63-00593A |
| Деталь: | FRAME- M LOWER FUSER |
| Парткод: | JC61-01063A |
| Деталь: | GUIDE-_M_INPUT |
| Парткод: | JC61-01066A |
| Деталь: | BRACKET-P-GUIDE FRAME |
| Парткод: | JC61-01069A |
| Деталь: | COVER-M-FRAME FUSER |
| Парткод: | JC63-00644A |
| Деталь: | HANDLE-M-FIX FUSER |
| Парткод: | JC64-00186A |
| Деталь: | COVER- M DECO |
| Парткод: | JC63-00581A |
| Деталь: | COVER-_M_FRONT |
| Парткод: | JC63-00582A |
| Деталь: | COVER- M OP FRAME LCD |
| Парткод: | JC63-00613A |
| Деталь: | SHEET-COVER OP LCD |
| Парткод: | JC63-00642A |
| Деталь: | PMO-OPE KEY 2 |
| Парткод: | JC72-01199B |
| Деталь: | PMO-OPE KEY 2 CAP |
| Парткод: | JC72-01200A |
| Деталь: | PMO-M OPE KEY 1 |
| Парткод: | JC72-01197C |
| Деталь: | PMO-M OPE KEY 1 CAP |
| Парткод: | JC72-01198C |
| Деталь: | PBA SUB-LCD_PANEL |
| Парткод: | JC92-01675A |
| Деталь: | FRAME- M BASE BOTTOM |
| Парткод: | JC61-01005A |
| Деталь: | IPR-CHANNEL FRAME BASE |
| Парткод: | JC70-00390A |
| Деталь: | COVER-M-BASE BAR |
| Парткод: | JC63-00207A |
| Деталь: | IPR-BRKT BASE BAR |
| Парткод: | JC70-00379A |
| Деталь: | MEA UNIT-PICK UP |
| Парткод: | JC97-02149A |
| Деталь: | Housing-M-Pick Up MP |
| Парткод: | JC61-00685A |
| Деталь: | CAM-CATCH |
| Парткод: | JC66-00050A |
| Деталь: | ELA UNIT-MPF |
| Парткод: | JC96-03332A |
| Деталь: | GUIDE- M PAPER MP |
| Парткод: | JC61-01147A |
| Деталь: | Foot-ML80 |
| Парткод: | JC61-40001A |
| Деталь: | COVER-SCREW LOCKING MP |
| Парткод: | JC63-00175A |
| Деталь: | PLATE-P-GROUND SCF MAIN |
| Парткод: | JC61-01016A |
| Деталь: | CBF HARNESS-THER |
| Парткод: | JC39-00433A |
| Деталь: | PBA SUB-TEMP SENSOR |
| Парткод: | JC92-01660A |
| Деталь: | BRACKET-P-POWER |
| Парткод: | JC61-00999A |
| Деталь: | CBF HARNESS-AC INLET |
| Парткод: | JC39-00452A |
| Деталь: | FRAME- M BASE MP |
| Парткод: | JC61-01041A |
| Деталь: | ROLLER-IDLE FEED |
| Парткод: | JC66-00764A |
| Деталь: | SPRING ETC-ROLLER |
| Парткод: | JC61-01274A |
| Деталь: | SPRING ETC-PAD |
| Парткод: | JC61-00387A |
| Деталь: | HOLDER- M PAD |
| Парткод: | JC61-01044A |
| Деталь: | RPR-Friction Pad MP |
| Парткод: | JC73-00132A |
| Цена: | 1 200 ₽ |
| Деталь: | LEVER- M ACTUATOR EMPTY |
| Парткод: | JC66-00775A |
| Деталь: | PMO-HOLDER SENSOR,MP |
| Парткод: | JC72-00772A |
| Деталь: | PBA SUB-MP EMP SENSOR |
| Парткод: | JC92-01662A |
| Деталь: | CBF HARNESS-MP_EMP2 |
| Парткод: | JC39-00431A |
| Деталь: | PLATE-P-GROUND BRACKET |
| Парткод: | JC61-01060A |
| Деталь: | PMO-Bushing Feed |
| Парткод: | JC72-00382B |
| Цена: | 260 ₽ |
| Деталь: | ROLLER-FEED MPF |
| Парткод: | JC66-00836A |
| Деталь: | PMO-Bearing Shaft |
| Парткод: | JC72-41191B |
| Цена: | 430 ₽ |
| Деталь: | BUSH- M ROLLER FEED |
| Парткод: | JC61-01145A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001249 |
| Деталь: | BRACKET-P-GEAR TRAY |
| Парткод: | JC61-01047A |
| Деталь: | GEAR-_M_IDLE PICKUP |
| Парткод: | JC66-00771A |
| Деталь: | GEAR- M MP FEED |
| Парткод: | JC66-00769A |
| Деталь: | HOLDER-_M_CLUTCH GEAR |
| Парткод: | JC61-01127A |
| Деталь: | GEAR- M IDLE FEED |
| Парткод: | JC66-00770A |
| Деталь: | GEAR-_M_DRIVE IDLE |
| Парткод: | JC66-00767A |
| Деталь: | Solenoid-MP |
| Парткод: | JC33-00017A |
| Деталь: | CAM-_M_PICK UP MP |
| Парткод: | JC66-00772A |
| Деталь: | HOLDER-M-BUSHING TX |
| Парткод: | JC61-00671A |
| Деталь: | PMO-Idle Pick Up MP |
| Парткод: | JC72-01003A |
| Деталь: | SHAFT-M-PICK UP MP |
| Парткод: | JC66-00453A |
| Деталь: | GEAR- M MP PICK UP |
| Парткод: | JC66-00768A |
| Деталь: | Spring ETC--Cam MP |
| Парткод: | JC61-00003A |
| Деталь: | GEAR- M HOLDER CAM |
| Парткод: | JC66-00766A |
| Деталь: | Bearing-Pick Up |
| Парткод: | JC66-10202A |
| Деталь: | BRACKET-P-HODLER PICKUP |
| Парткод: | JC61-01045A |
| Деталь: | PLATE-_M_KNOCK UP |
| Парткод: | JC61-01048A |
| Деталь: | RPR-Pad Cassette |
| Парткод: | JC73-00141A |
| Цена: | 80 ₽ |
| Деталь: | SPRING ETC-KNOCK UP MP |
| Парткод: | JC61-70913A |
| Деталь: | PMO-IDLE KNOCK UP MP |
| Парткод: | JC72-01004A |
Коды ошибок
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Описание
| Error code: | 01 |
| Display: | ERROR CONDITION INVALID HEAD |
| Description: | The ERROR light flashes. |
| Causes: | The printhead was replaced with one that is not a genuine Zebra™ printhead. |
| Remedy: | Install a genuine Zebra printhead. |
| Error code: | 02 |
| Display: | ERROR CONDITION RIBBON OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Remedy: | Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. |
| Error code: | 03 |
| Display: | WARNING RIBBON IN |
| Description: | The ERROR light flashes. |
| Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
| Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
| Error code: | 04 |
| Display: | ERROR CONDITION PAPER OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
| Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
| Error code: | 05 |
| Display: | ERROR CONDITION HEAD OPEN |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is not fully closed. The head open sensor is not working properly. |
| Remedy: | Replace the sensor. |
| Error code: | 06 |
| Display: | THERMISTOR FAULT |
| Description: | The ERROR light flashes. |
| Causes: | The printhead has a faulty thermistor. |
| Remedy: | Replace the printhead. |
| Error code: | 07 |
| Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
| Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
| Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 08 |
| Display: | WARNING HEAD COLD |
| Description: | The printer prints while the ERROR light flashes. |
| Causes: | The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 09 |
| Display: | WARNING HEAD TOO HOT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is over temperature. |
| Remedy: | Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature. |
| Error code: | 10 |
| Display: | DEFRAGMENTING |
| Description: | The printer stops. |
| Causes: | The printer is defragmenting memory. |
| Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 12 |
| Description: | General print quality issues |
| Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
| Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
| Error code: | 13 |
| Description: | Long tracks of missing print on several labels |
| Causes: | Print element damaged. |
| Remedy: | Replace the printhead. |
| Error code: | 14 |
| Description: | Wrinkled ribbon |
| Causes: | Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned. |
| Remedy: | See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance. |
| Error code: | 15 |
| Description: | Printing too light or too dark over the entire label |
| Causes: | The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure. |
| Remedy: | Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70. |
| Error code: | 16 |
| Description: | Smudge marks on labels |
| Causes: | The media or ribbon is not designed for high-speed operation. |
| Remedy: | Replace supplies with those recommended for high-speed operation. |
| Error code: | 17 |
| Description: | Misregistration/skips labels |
| Causes: | The printer is not calibrated. Improper label format. |
| Remedy: | Recalibrate the printer. Use correct label format. |
| Error code: | 18 |
| Description: | Misregistration and misprint of one to three labels |
| Causes: | The platen roller is dirty. Media does not meet specifications. |
| Remedy: | See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications. |
| Error code: | 19 |
| Description: | Vertical drift in top-of-form position |
| Causes: | The printer is out of calibration. Vertical drift occurs during normal printer operation. Note • A vertical drift of ± 4 to 6 dot rows (approximately 0.5 mm) is within normal tolerances. The platen roller is dirty. |
| Remedy: | Recalibrate the printer. Calibrate the printer. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. |
| Error code: | 20 |
| Description: | Vertical image or label drift |
| Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
| Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
| Error code: | 21 |
| Description: | The bar code printed on a label does not scan. |
| Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
| Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
| Error code: | 22 |
| Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
| Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
| Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
| Error code: | 23 |
| Description: | Auto Calibrate failed. |
| Causes: | Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly. |
| Remedy: | Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. |
| Error code: | 24 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light does not flash. |
| Causes: | The communication parameters are incorrect. |
| Remedy: | Check the printer driver or software communications settings (if applicable). If you are using serial communication, check the serial port setting in the control panel menu. See Set Serial Communications on page 91. If you are using serial communication, make sure you are using a null modem cable or a null modem adapter. Using the control panel controls, check the protocol setting. It should be set to NONE. See Set Protocol on page 93. If a driver is used, check the driver communication settings for your connection. |
| Error code: | 25 |
| Description: | A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label. |
| Causes: | The serial communication settings are incorrect. |
| Remedy: | Ensure that the flow control settings match. Check the communication cable length. See Table 5 on page 48 for requirements. Check the printer driver or software communications settings (if applicable). |
| Error code: | 26 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light flashes but no printing occurs. |
| Causes: | The prefix and delimiter characters set in the printer do not match the ones in the label format. Incorrect data is being sent to the printer. |
| Remedy: | Verify the prefix and delimiter characters. See Set Format Prefix Character on page 94 and Set Delimiter Character on page 95 for the requirements. Check the communication settings on the computer. Ensure that they match the printer settings. If the problem continues, check the label format. |
| Error code: | 27 |
| Description: | Broken or melted ribbon |
| Causes: | Darkness setting too high. |
| Remedy: | 1. Reduce the darkness setting. 2. Clean the printhead thoroughly. |
| Error code: | 28 |
| Description: | The printer does not detect when the ribbon runs out. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Causes: | The ribbon-out threshold is set too high to detect the ribbon. On a sensor profile, the ribbon-out threshold (circled in Figure 15) appears above the black bars that indicate the ribbon. This happens if you calibrate the printer without ribbon and later insert ribbon without recalibrating the printer or loading printer defaults. |
| Remedy: | 1. Print a sensor profile (see Print Sensor Profile on page 89), and note the location of the ribbon-out threshold (circled in Figure 15). 2. Calibrate the printer, this time using ribbon, or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. Important • Loading defaults resets all printer parameters back to factory defaults. 3. Print another sensor profile, and compare it to the first one. 4. If the ribbon-out threshold is still too high, you may manually change the value. |
| Error code: | 29 |
| Description: | The ribbon light is on even though ribbon is loaded correctly. |
| Causes: | The printer was not calibrated for the label and ribbon being used. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. |
| Error code: | 30 |
| Description: | The LCD displays a language that I cannot read |
| Causes: | The language parameter was changed through the control panel or a firmware command. |
| Remedy: | 1. Press SETUP/EXIT to enter configuration mode. 2. Press MINUS (-). The printer displays the LANGUAGE parameter in the current language. Even if you cannot recognize the characters displayed, you can still scroll to another language. 3. Press SELECT to select the parameter. 4. Press PLUS (+) or MINUS (-) to scroll through the choices until you find a language that you can read. 5. Press SETUP/EXIT. The LCD displays SAVE CHANGES in the original language. 6. Press SETUP/EXIT again to exit configuration mode and save the changes (if the language does not change, you may need to scroll to a different save option by pressing PLUS (+) or MINUS (-) in the previous step). 7. Repeat this process, if necessary, until you reach the desired language. |
| Error code: | 31 |
| Description: | The LCD is missing characters or parts of characters |
| Causes: | The LCD may need replacing. |
| Remedy: | Run the Power-On Self Test on page 117 and check that the LCD display shows all characters. If not, replace the LCD. |
| Error code: | 32 |
| Description: | Changes in parameter settings did not take effect |
| Causes: | Parameters are set incorrectly. A command turned off the ability to change the parameter. A command changed the parameter back to the previous setting. If the problem continues, there may be a problem with the main logic board. |
| Remedy: | 1. Set parameters and save permanently. 2. Turn the printer off (O) and then on (I). Refer to the ZPL Programming Guide. Refer to the ZPL Programming Guide. Replace the main logic board. |
| Error code: | 33 |
| Description: | The printer fails to calibrate or detect the top of the label. |
| Causes: | The printer was not calibrated for the label being used. The printer is configured for continuous media. The driver or software configuration is not set correctly. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. Driver or software settings produce commands that can overwrite the printer configuration. Check the driver or software media-related setting. |
