Samsung CLP-770ND
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
120000
Скорость печати
A4
32
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Сканер |
|
Телефон |
|
Печать фотографий |
|
Копир |
|
Факс |
|
Число страниц в месяц |
120 000 |
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Цветность печати |
цветная |
Тип устройства |
Принтер |
Размещение |
настольный |
Макс. формат |
A4 |
Область применения |
большой офис |
Принтер |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
|
Количество цветов |
4 |
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
Скорость ч/б печати |
|
| A4 | 32 |
Макс, разрешение для цветной печати |
|
| По X | 9 600 |
Время выхода первого отпечатка |
|
| Ч/б | 10 |
Сканер |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Отправка изображения по e-mail |
|
Скорость сканирования |
|
| Цветн, | 11 |
Расходные материалы |
|
Ресурс цветного картриджа/тонера |
7 000 |
Ресурс ч/б картриджа/тонера |
7 000 |
Количество картриджей |
4 |
Печать на: |
|
| Карточках |
|
| Этикетках |
|
| Рулоне |
|
| Глянцевой бумаге |
|
| Матовой бумаге |
|
| Пленках |
|
| Конвертах |
|
| CD/DVD |
|
| Фотобумаге |
|
Плотность бумаги |
|
| Максимальная | 221 |
| Минимальная | 60 |
Факс |
|
Цветной |
|
Телефон |
|
Беспроводная трубка |
|
АОН |
|
Caller ID |
|
Автоответчик |
|
Спикерфон |
|
Стандарт DECT |
|
Проводная трубка |
|
Языки управления |
|
| PCL 5c |
|
| PCL 6 |
|
| PostScript 3 |
|
|
|
|
| PostScript |
|
| PostScript 2 |
|
| PCL 5e |
|
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Стандартная | 600 |
| Максимальная | 1 600 |
Вывод бумаги |
|
| Стандартный | 250 |
Финишер |
|
Брошюровщик |
|
Сортер |
|
Степлер |
|
Интерфейсы |
|
Ethernet (RJ-45) |
|
USB |
|
Инфракрасный порт |
|
Устройство для чтения карт памяти |
|
Веб-интерфейс |
|
RS-232 |
|
LPT |
|
Bluetooth |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
Версия USB |
2,0 |
Память/Процессор |
|
Объем памяти |
256 |
Макс, объем памяти |
768 |
Частота процессора |
720 |
Дополнительная информация |
|
Экран |
|
Мин. системные требования |
|
Поддержка ОС |
|
| Mac OS |
|
| Windows |
|
| Linux |
|
| DOS |
|
Потребляемая мощность |
|
| При работе | 750 |
| В режиме ожидания | 35 |
Уровень шума |
|
| При работе | 53 |
| В режиме ожидания | 35 |
Габариты |
|
Ширина |
481 |
Вес |
28,6 |
Высота |
446 |
Глубина |
464 |
Модули
CASSETTE-SCF
COVERS and LABELS
FRAME BOTTOM MAIN
FUSER BLDC MAIN
COVER
Feed Drive
MAIN
Front Cover
FRAME RIGHT ASSY
FRAME
TOP COVER
PANEL
CASSETTE ASSEMBLY
Fuser
CASSETTE
SCF
FRAME LEFT ASSY
Детали MAIN
| Деталь: | ELA HOU-CASSETTE |
| Парткод: | JC96-04954B |
| Деталь: | MEA-HOLDER PAD |
| Парткод: | JC97-03133A |
| Деталь: | FRAME-M_CASSETTE |
| Парткод: | JC61-01220A |
| Деталь: | GUIDE-M-PAPER SIZE |
| Парткод: | JC61-01227A |
| Деталь: | BRACKET-P-EXTENTION |
| Парткод: | JC61-01223A |
| Деталь: | GUIDE-M_EXTENSION CST |
| Парткод: | JC61-01224A |
| Деталь: | KNOB-M_REAR |
| Парткод: | JC64-00190B |
| Деталь: | Spring Etc-Guide Paper |
| Парткод: | JC61-00414A |
| Деталь: | GUIDE-M-LOCK A |
| Парткод: | JC61-00267B |
| Деталь: | GUIDE-M_REAR |
| Парткод: | JC61-01226B |
| Деталь: | Guide-P-Rear Paper CST |
| Парткод: | JC61-00751A |
| Деталь: | PMO-Locker Plate |
| Парткод: | JC72-41210A |
| Деталь: | SPRING ETC-LOCKER_PLATE |
| Парткод: | JG61-70531A |
| Деталь: | PLATE-P-KNOCK UP |
| Парткод: | JC61-01245A |
| Деталь: | Spring Etc-Plate K/Up |
| Парткод: | JC61-00455A |
| Деталь: | RPR-Pad Cassette |
| Парткод: | JC73-00141A |
| Цена: | 80 ₽ |
| Деталь: | Spring Etc-Exit Roll FD |
| Парткод: | JC61-70911A |
| Деталь: | Holder-M-Pad_Housing |
| Парткод: | JC61-01228A |
| Деталь: | GROUND-CASSETTE |
| Парткод: | JC63-01206A |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | GUIDE-SIDE_L |
| Парткод: | JC61-02438A |
| Деталь: | SPRING ETC-EXIT ROLLER FD |
| Парткод: | JC61-70911A |
| Деталь: | GUIDE-P-SIDE_R |
| Парткод: | JC61-01244A |
| Деталь: | Guide-M_Side Lock |
| Парткод: | JC61-01225B |
| Деталь: | LEVER-INDICAT OR_SCF |
| Парткод: | JC66-01409A |
| Деталь: | LABEL(R)-CASSETTE |
| Парткод: | JC68-01552A |
| Деталь: | SHUTTER-PATH |
| Парткод: | JC64-00268A |
| Деталь: | Guide-Paper |
| Парткод: | JC61-01724A |
| Деталь: | COVER_HANDLE |
| Парткод: | JC63-01306B |
| Деталь: | SCREW-TAPPING |
| Парткод: | 6002-000440 |
| Деталь: | SPRING ETC-CLAW |
| Парткод: | JC61-00064A |
| Цена: | 280 ₽ |
| Деталь: | Подставка |
| Парткод: | ML-DSK20S |
| Деталь: | ELA UNIT-FRAME_BOTTOM |
| Парткод: | JC96-05413A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | FRAME-BOTTOM |
| Парткод: | JC61-01871A |
| Деталь: | GUIDE-PICKUP |
| Парткод: | JC61-01878A |
| Деталь: | Holder-REGI |
| Парткод: | JC61-02783A |
| Деталь: | HOLDER-REGI_CLEANING |
| Парткод: | JC61-02851A |
| Деталь: | SPONGE-REGI CLEANING |
| Парткод: | JC72-01545A |
| Деталь: | ELA Unit-Pick Up |
| Парткод: | JC96-05421A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | Ring-CS |
| Парткод: | 6044-000001 |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Spring-TS |
| Парткод: | 6107-001164 |
| Цена: | 1 100 ₽ |
| Деталь: | Spring-TS |
| Парткод: | 6107-001170 |
| Деталь: | Spring-ES |
| Парткод: | 6107-001545 |
| Деталь: | HARNESS-REGI SENSOR |
| Парткод: | JC39-01023A |
| Деталь: | BUSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | BUSH-6_D(L) |
| Парткод: | JC61-00884A |
| Деталь: | BRACKET-REGI_R |
| Парткод: | JC61-03489A |
| Деталь: | BRACKET-REGI-L |
| Парткод: | JC61-02782A |
| Деталь: | FRAME-PICKUP |
| Парткод: | JC61-02799A |
| Деталь: | SHEET-FRAME_PICKUP_L |
| Парткод: | JC63-02179A |
| Деталь: | SHEET-FRAME_PICKUP_R |
| Парткод: | JC63-02180A |
| Деталь: | CAM-M-PICKJJP |
| Парткод: | JC66-00377A |
| Цена: | 500 ₽ |
| Деталь: | CAM-SHAFT_PICK UP |
| Парткод: | JC66-01402A |
| Деталь: | ACTUATOR-PAPER EMPTY |
| Парткод: | JC66-01820A |
| Деталь: | Actuator-Feed |
| Парткод: | JC66-02052A |
| Деталь: | ACTUATOR-REGI |
| Парткод: | JC66-02053A |
| Деталь: | SHAFT-REGI |
| Парткод: | JC66-02087A |
| Деталь: | ROLLER-REGI |
| Парткод: | JC66-02088A |
| Деталь: | Shaft-Pick Up |
| Парткод: | JC66-02089A |
| Деталь: | PMO-BUSHING_P/U,MP |
| Парткод: | JC72-41364A |
| Деталь: | ASF-PICK UP |
| Парткод: | JC90-00932A |
| Цена: | 250 ₽ |
| Деталь: | HOLDER-FEED |
| Парткод: | JC61-03490A |
| Деталь: | Roller-Feed |
| Парткод: | JC66-02417A |
| Деталь: | BUSH-DEV DR |
| Парткод: | JC61-00772A |
| Деталь: | Washer-Plain |
| Парткод: | 6031-000019 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000282 |
| Деталь: | BUSH-4D_FE |
| Парткод: | JC61-01686A |
| Деталь: | GEAR-FEED ROLLER |
| Парткод: | JC66-02420A |
| Деталь: | GEAR-RDCN FEED D |
| Парткод: | JC66-02418A |
| Деталь: | ELA UNIT-FUSER BLDC |
| Парткод: | JC96-05427A |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001003 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00117A |
| Деталь: | CLUTCH-BK DEVE |
| Парткод: | JC47-00006D |
| Деталь: | BUSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | GUIDE-FUSER R |
| Парткод: | JC61-01851A |
| Деталь: | BRACKET-FUSER DRIVE L |
| Парткод: | JC61-01859A |
| Деталь: | BRACKET-FUSER R BLDC |
| Парткод: | JC61-01860B |
| Деталь: | BRACKET-FUSER MOTOR |
| Парткод: | JC61-02550A |
| Деталь: | LATCH-M-HUB CLUTCH |
| Парткод: | JC66-01070A |
| Деталь: | GEAR-FUSER RDCN OUT V |
| Парткод: | JC66-01155A |
| Деталь: | SHAFT-CLUTCH FU |
| Парткод: | JC66-01341A |
| Деталь: | GEAR-DRV FU |
| Парткод: | JC66-01362A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01366A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01368A |
| Деталь: | GEAR-IDLE EXIT |
| Парткод: | JC66-01371A |
| Деталь: | GEAR-RDCN EXIT |
| Парткод: | JC66-01381A |
| Деталь: | GEAR-RDCN FU |
| Парткод: | JC66-01386A |
| Деталь: | GEAR-RDCN FU |
| Парткод: | JC66-01387A |
| Деталь: | GEAR-RDCN FU |
| Парткод: | JC66-01388A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01393A |
| Деталь: | GEAR-RDCN FUCZ |
| Парткод: | JC66-02434A |
| Деталь: | MPR-RING CHARGE |
| Парткод: | JG74-10541A |
| Деталь: | MEA UNIT-COVER |
| Парткод: | JC97-03520A |
| Деталь: | ELA-COVER TOP |
| Парткод: | JC96-05439A |
| Деталь: | MEA-Cover Front |
| Парткод: | JC97-03514A |
| Деталь: | MEA-COVER RIGHT |
| Парткод: | JC97-03539A |
| Деталь: | COVER-LEFT |
| Парткод: | JC63-02087A |
| Деталь: | MEA-BRACKET REAR |
| Парткод: | JC97-03052A |
| Деталь: | BRACKET-REAR |
| Парткод: | JC61-02211A |
| Деталь: | COVER-REAR HDD |
| Парткод: | JC63-01314A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | ELA UNIT-FEED DRIVE |
| Парткод: | JC96-05436A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000301 |
| Деталь: | PMO-IMPELLER_DRV |
| Парткод: | JC72-00825A |
| Деталь: | MOTOR STEP |
| Парткод: | JC31-00076A |
| Деталь: | BRACKET-FEED MOTOR |
| Парткод: | JC61-02776A |
| Деталь: | GEAR-IDLE FEED A |
| Парткод: | JC66-02043A |
| Деталь: | GEAR-IDLE FEED B |
| Парткод: | JC66-02044A |
| Деталь: | GEAR-IDLE FEED C |
| Парткод: | JC66-02045A |
| Деталь: | BRACKET-FEED GEAR |
| Парткод: | JC61-02785A |
| Деталь: | GEAR-RDCN FEED A |
| Парткод: | JC66-02040A |
| Деталь: | GEAR-RDCN FEED B |
| Парткод: | JC66-02041A |
| Деталь: | GEAR-RDCN FEED C |
| Парткод: | JC66-02042A |
| Деталь: | 32/32ppm A4 Color Laser Printer |
| Парткод: | CLP-770ND |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | MEA COVER-NOISE |
| Парткод: | JC97-03537A |
| Деталь: | ELA UNIT-MAIN_SODIMM |
| Парткод: | JC96-05220A |
| Деталь: | ELA Unit-Main |
| Парткод: | JC96-05220B |
| Деталь: | ELA UNIT-MAIN_SODIMM |
| Парткод: | JC96-05220C |
| Деталь: | BOARD |
| Парткод: | JC96-05220D |
| Деталь: | FDB-MUTI_TRIAC V1 |
| Парткод: | JC44-00170A |
| Деталь: | FDB-MULTI_TRIAC V2C |
| Парткод: | JC44-00171A |
| Деталь: | SMPS-V1 |
| Парткод: | JC44-00093B |
| Деталь: | SMPS-V2C |
| Парткод: | JC44-00100B |
| Деталь: | SUPPORT-PCB |
| Парткод: | JC61-02543A |
| Деталь: | RUBBER-SUPPORT |
| Парткод: | JC73-00280A |
| Деталь: | GUIDE-HARNESS |
| Парткод: | JC61-01854A |
| Деталь: | GUIDE-_M_BUSH HARNESS S |
| Парткод: | JC61-01012A |
| Деталь: | FAN-DC |
| Парткод: | JC31-00088A |
| Деталь: | Frame-Duct |
| Парткод: | JC61-01910A |
| Деталь: | HARNESS-AC INLET |
| Парткод: | JC39-01025A |
| Деталь: | BRACKET-DUMMY_POWER |
| Парткод: | JC61-01867A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000301 |
| Деталь: | BRACKET-MAIN |
| Парткод: | JC61-01866C |
| Деталь: | ELA Unit-Lsu |
| Парткод: | JC96-04500B |
| Цена: | 12 100 ₽ |
| Деталь: | HVPS |
| Парткод: | JC44-00169A |
| Деталь: | LINK-HINGE |
| Парткод: | JC66-01422A |
| Деталь: | FRAME-DAMPER_R |
| Парткод: | JC61-01911B |
| Деталь: | BRACKET-HINGE_R |
| Парткод: | JC61-01897A |
| Деталь: | DAMPER-HINGE |
| Парткод: | JC66-01425A |
| Деталь: | FRAME-DAMPER_L |
| Парткод: | JC61-01912B |
| Деталь: | BRACKET-HINGE_L |
| Парткод: | JC61-01897A |
| Деталь: | ELA UNIT-FUSER |
| Парткод: | JC96-05454A |
| Деталь: | ELA UNIT-FUSER |
| Парткод: | JC96-05455A |
| Цена: | 11 700 ₽ |
| Деталь: | MEA UNIT-COVER |
| Парткод: | JC97-03520A |
| Деталь: | ELA Unit-Cassette |
| Парткод: | JC96-05346A |
| Цена: | 5 300 ₽ |
| Деталь: | ELA-UNIT_SCF |
| Парткод: | JC96-05347A |
| Деталь: | CARTRIDGE-TONER K |
| Парткод: | JC96-05435A |
| Деталь: | CARTRIDGE-TONER C |
| Парткод: | JC96-05434A |
| Деталь: | CARTRIDGE-TONER M |
| Парткод: | JC96-05433A |
| Деталь: | CARTRIDGE-TONER Y |
| Парткод: | JC96-05432A |
| Деталь: | ELA UNIT-PTB DUPLEX |
| Парткод: | JC96-05387A |
| Деталь: | HVPS (AC board) |
| Парткод: | JC44-00177A |
| Деталь: | FAN |
| Парткод: | JC31-00072A |
| Деталь: | INSULATION-AC |
| Парткод: | JC62-00618A |
| Деталь: | PBA-Main |
| Парткод: | JC92-02075A |
| Деталь: | PBA-Main |
| Парткод: | JC92-02075B |
| Деталь: | PBA-Main |
| Парткод: | JC92-02075C |
| Деталь: | PBA-Main |
| Парткод: | JC92-02075D |
| Деталь: | PBA MAIN-DIMM |
| Парткод: | JC92-01824B |
| Деталь: | MEA-Cover Front |
| Парткод: | JC97-03514A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | Spring-ES |
| Парткод: | 6107-001138 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001218 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001345 |
| Деталь: | Spring ETC-Guide Deve |
| Парткод: | JC61-00038A |
| Деталь: | BRACKET-P-COVER LOCK |
| Парткод: | JC61-01050A |
| Деталь: | HOLDER-KNOB HANDLE |
| Парткод: | JC61-01841A |
| Деталь: | HOLDER-LOCKER FRONT L |
| Парткод: | JC61-01842A |
| Деталь: | HOLDER-LOCKER FRONT R |
| Парткод: | JC61-01843A |
| Деталь: | HOLDER-LINK FRONT |
| Парткод: | JC61-01846B |
| Деталь: | SUPPORT-PTB L |
| Парткод: | JC61-01848B |
| Деталь: | SUPPORT-PTB R |
| Парткод: | JC61-01849B |
| Деталь: | COVER-FRONT PATH |
| Парткод: | JC63-01290B |
| Деталь: | Cover-Front |
| Парткод: | JC63-02086A |
| Деталь: | KNOB-HANDLE |
| Парткод: | JC64-00299B |
| Деталь: | LOCKER-FRONT L |
| Парткод: | JC64-00305A |
| Деталь: | LOCKER-FRONT R |
| Парткод: | JC64-00306A |
| Деталь: | SHAFT-HINGE LINK |
| Парткод: | JC66-00835A |
| Деталь: | ROLLER-M_IDLE SCF |
| Парткод: | JC66-01022A |
| Цена: | 260 ₽ |
| Деталь: | LEVER-COUPLING L |
| Парткод: | JC66-01352A |
| Деталь: | LEVER-COUPLING R |
| Парткод: | JC66-01353A |
| Деталь: | LEVER-PTB |
| Парткод: | JC66-01354A |
| Деталь: | LINK-SUPPORT |
| Парткод: | JC66-01358A |
| Деталь: | LEVER-PTB TOP |
| Парткод: | JC66-01421A |
| Деталь: | Shaft-DUP_Roller |
| Парткод: | JC66-01846A |
| Цена: | 1 200 ₽ |
| Деталь: | LABEL-INSTALL |
| Парткод: | JC68-01905A |
| Деталь: | MEA-TRAY MP |
| Парткод: | JC97-03515A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000264 |
| Деталь: | GUIDE-M_SIDE MP R |
| Парткод: | JC61-01042B |
| Деталь: | GUIDE-M_SIDE MP L |
| Парткод: | JC61-01043B |
| Деталь: | TRAY-ASF_INPUT |
| Парткод: | JC63-01293B |
| Деталь: | COVER-MPTRAY |
| Парткод: | JC63-02088A |
| Деталь: | BADGE-COLOR MIDDLE |
| Парткод: | JC64-00428A |
| Деталь: | LINK-TRAY_MP_L |
| Парткод: | JC66-01349A |
| Деталь: | LINK-TRAY_MP_R |
| Парткод: | JC66-01350A |
| Деталь: | LABEL(R)-HEIGHT MP |
| Парткод: | JC68-01528A |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | ELA UNIT-FRAME_RIGHT |
| Парткод: | JC96-05438A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000301 |
| Деталь: | SCREW-MACHINE |
| Парткод: | 6006-001193 |
| Деталь: | SCREW-SPECIAL |
| Парткод: | 6009-001396 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001317 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001318 |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-000132 |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-001093 |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00117A |
| Деталь: | HARNESS-PTB DRAW_FR |
| Парткод: | JC39-00663A |
| Деталь: | GUIDE-_M_BUSH HARNESS S |
| Парткод: | JC61-01012A |
| Деталь: | BRACKET-GEAR DEVE |
| Парткод: | JC61-01837A |
| Деталь: | BRACKET-DRAWER_PTB |
| Парткод: | JC61-01898A |
| Деталь: | GUIDE-RAIL_R |
| Парткод: | JC61-01907B |
| Деталь: | FRAME-RIGHT |
| Парткод: | JC61-01925B |
| Деталь: | BRACKET-DEVE_DR B |
| Парткод: | JC61-02160B |
| Деталь: | BRACKET-MAIN COVER |
| Парткод: | JC61-02775A |
| Деталь: | BRACKET-BLDC MOTOR |
| Парткод: | JC61-02777A |
| Деталь: | HOLDER-PTB GEAR |
| Парткод: | JC61-02778A |
| Деталь: | COVER-PTB GEAR |
| Парткод: | JC63-02079A |
| Деталь: | SHAFT-PTB GEAR |
| Парткод: | JC66-02105A |
| Деталь: | CAM-PTB COUPLING |
| Парткод: | JC66-01343A |
| Деталь: | CAM-OPC COUPLING |
| Парткод: | JC66-01344A |
| Деталь: | GEAR-COUPLING DRV PTB |
| Парткод: | JC66-01361A |
| Деталь: | GEAR-DRV DEVE CZ |
| Парткод: | JC66-02443A |
| Деталь: | GEAR-DRV2 DEVE |
| Парткод: | JC66-01365A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01367A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01369A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01370A |
| Деталь: | GEAR- IDLE PTB A |
| Парткод: | JC66-01377A |
| Деталь: | GEAR-IDLE PTB B |
| Парткод: | JC66-01378A |
| Деталь: | GEAR-RDCN DEVE |
| Парткод: | JC66-01380A |
| Деталь: | GEAR-RDCN OPC |
| Парткод: | JC66-01389A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01394A |
| Деталь: | GEAR-RDCN PTB A |
| Парткод: | JC66-02047A |
| Деталь: | GEAR-RDCN OPC A |
| Парткод: | JC66-02048A |
| Деталь: | GEAR-IDLE PTB C |
| Парткод: | JC66-02049A |
| Деталь: | CAP-OPC GEAR |
| Парткод: | JC67-00341A |
| Деталь: | PBA SUB-TEMP |
| Парткод: | JC92-02107A |
| Деталь: | ELA UNIT-SUPPORT_CSTR |
| Парткод: | JC96-05424A |
| Деталь: | MEA UNIT-COUPLING OPC |
| Парткод: | JC97-02853A |
| Деталь: | MEA UNIT-GEAR OPC |
| Парткод: | JC97-02960A |
| Деталь: | SCREW-HEX |
| Парткод: | 6009-001492 |
| Деталь: | DUCT-FAN |
| Парткод: | JC67-00419A |
| Деталь: | Stopper-M-Fan80 |
| Парткод: | JC61-00667A |
| Деталь: | FAN |
| Парткод: | JC31-00115A |
| Деталь: | ELA UNIT-MAIN_FRAME |
| Парткод: | JC96-05411A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | SCREW-MACHINE |
| Парткод: | 6006-001193 |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | SENSOR-HUMIDITY |
| Парткод: | JC32-00005A |
| Деталь: | SOLENOID-PICKJJP |
| Парткод: | JC33-00022A |
| Цена: | 600 ₽ |
| Деталь: | HARNESS-BLDC_CLU_FAN |
| Парткод: | JC39-00938A |
| Деталь: | HARNESS-FEED STEP MOTOR |
| Парткод: | JC39-01022A |
| Деталь: | HARNESS-OPC BLDC |
| Парткод: | JC39-01026A |
| Деталь: | HARNESS-DEVE BLDC PICKUP SOL |
| Парткод: | JC39-01028A |
| Деталь: | CLUTCH-FEED |
| Парткод: | JC47-00023A |
| Цена: | 1 100 ₽ |
| Деталь: | BJSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | BRACKET-LOCKERjPTBjL |
| Парткод: | JC61-01855A |
| Деталь: | BRACKET-LOCKERjPTBjR |
| Парткод: | JC61-01869A |
| Деталь: | SPRING ETC-LOCKjPTBjR |
| Парткод: | JC61-01879A |
| Деталь: | GJIDE-HARNESSjCABLE |
| Парткод: | JC61-01890A |
| Деталь: | SPRING ETC-LOCKjPTBjL |
| Парткод: | JC61-01899A |
| Деталь: | FRAME-LSJ |
| Парткод: | JC61-01927A |
| Деталь: | BRACKET-OPE SIDE |
| Парткод: | JC61-02656A |
| Деталь: | PLATE-GNDjPICKJP |
| Парткод: | JC61-02834A |
| Деталь: | SHEET-LSJ |
| Парткод: | JC63-02115A |
| Деталь: | LOCKER-PTBjR |
| Парткод: | JC64-00303A |
| Деталь: | LOCKER-PTBjL |
| Парткод: | JC64-00304A |
| Деталь: | GEAR-RDCN FEED E |
| Парткод: | JC66-02419A |
| Деталь: | CAP-PICK UP GEAR |
| Парткод: | JC67-00340A |
| Деталь: | BAR-PJCROSS BOTTOM |
| Парткод: | JC71-00042A |
| Деталь: | SPONGE-SEALINGjLSU |
| Парткод: | JC72-01539A |
| Деталь: | SPONGE-BARjCROSS |
| Парткод: | JC72-01553A |
| Деталь: | ELA UNIT-OPEjLEFT |
| Парткод: | JC96-04481A |
| Деталь: | ELA UNIT-DUCTjFUSER |
| Парткод: | JC96-04487A |
| Деталь: | ELA UNIT-FRAMEjTOP |
| Парткод: | JC96-05412A |
| Деталь: | ELA UNIT-FRAMEjBOTTOM |
| Парткод: | JC96-05413A |
| Деталь: | ELA UNIT-FRAMEjLEFT |
| Парткод: | JC96-05415A |
| Деталь: | ELA UNIT-DEVEjCRUM |
| Парткод: | JC96-05420A |
| Деталь: | ELA UNIT-FUSER BLDC |
| Парткод: | JC96-05427A |
| Деталь: | ELA UNIT-FEED DRIVE |
| Парткод: | JC96-05436A |
| Деталь: | ELA UNIT-FRAMEjRIGHT |
| Парткод: | JC96-05438A |
| Деталь: | MEA UNIT-COVERjOPEN |
| Парткод: | JC97-02883A |
| Деталь: | MEA-GEAR PICK UP |
| Парткод: | JC97-02895A |
| Деталь: | ELA-COVER TOP |
| Парткод: | JC96-05439A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | GUIDE-STACKER COVER |
| Парткод: | JC61-01460E |
| Деталь: | Cover-Top |
| Парткод: | JC63-02091A |
| Деталь: | ACTUATOR-OUTFULL |
| Парткод: | JC66-02064A |
| Деталь: | ELA-OPE |
| Парткод: | JC96-05425A |
| Деталь: | MEA-COVER EXIT |
| Парткод: | JC97-03513A |
| Деталь: | KEY-POWER |
| Парткод: | JB64-00114B |
| Деталь: | LCD |
| Парткод: | JC07-00012A |
| Деталь: | HARNESS-PANEL |
| Парткод: | JC39-01021A |
| Деталь: | HOLDER-LCD |
| Парткод: | JC61-02792A |
| Деталь: | HOLDER-LED |
| Парткод: | JC61-02793A |
| Деталь: | BRACKET-LCD |
| Парткод: | JC61-02794A |
| Деталь: | Cover-OPE |
| Парткод: | JC63-02089A |
| Деталь: | KEY-OK |
| Парткод: | JC64-00389A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000282 |
| Деталь: | GROUND-EXIT |
| Парткод: | JC63-01277A |
| Деталь: | COVER-FUSER EXIT |
| Парткод: | JC63-01299A |
| Деталь: | COVER-EXIT |
| Парткод: | JC63-02085A |
| Деталь: | ACTUATOR-STACKER_SUB |
| Парткод: | JC66-02063A |
| Деталь: | ACTUATOR-STACKER |
| Парткод: | JC66-02065A |
| Деталь: | BRUSH-ANTISTATIC |
| Парткод: | JC67-00295A |
| Деталь: | SPONGE-COVER_EXIT |
| Парткод: | JC72-01503A |
| Деталь: | KEY-STOP |
| Парткод: | JC64-00393A |
| Деталь: | KEY-MENU |
| Парткод: | JC64-00442A |
| Деталь: | KEY-POWER_B |
| Парткод: | JC64-00443A |
| Деталь: | KEY-CIRCLE |
| Парткод: | JC64-00445A |
| Деталь: | SPONGE-LCD |
| Парткод: | JC72-01529A |
| Деталь: | PBA-OPE |
| Парткод: | JC92-02078A |
| Деталь: | SPONGE-NOISE A |
| Парткод: | JC72-01541A |
| Деталь: | Адаптер беспроводной сетевой печати |
| Парткод: | ML-NWA30L |
| Деталь: | Датчик наличия бумаги |
| Парткод: | 0604-001415 |
| Цена: | 240 ₽ |
| Деталь: | Дополнительный лоток подачи бумаги |
| Парткод: | CLP-S770A |
| Деталь: | Резиновый элемент на ролик захвата бумаги из основного лотка |
| Парткод: | JC73-00223A |
| Цена: | 350 ₽ |
| Деталь: | Резиновый элемент на ролик захвата бумаги |
| Парткод: | JC73-00340A |
| Цена: | 230 ₽ |
| Деталь: | Ролик отделения бумаги из кассеты, в сборе |
| Парткод: | JC90-01063A |
| Цена: | 550 ₽ |
| Деталь: | Резиновый элемент на ролик захвата бумаги из кассеты |
| Парткод: | JC66-01168A |
| Деталь: | Ролик захвата бумаги из из кассеты |
| Парткод: | JC61-01601B |
| Цена: | 290 ₽ |
| Деталь: | Пластиковое основание ролика захвата бумаги |
| Парткод: | JC61-04100A |
| Цена: | 270 ₽ |
| Деталь: | Ролик захвата бумаги из кассеты, в сборе |
| Парткод: | JC93-00310A |
| Цена: | 180 ₽ |
| Деталь: | ELA UNIT-FUSER |
| Парткод: | JC96-05454A |
| Деталь: | ELA UNIT-FUSER |
| Парткод: | JC96-05455A |
| Цена: | 11 700 ₽ |
| Деталь: | DRAWER_CONNECTOR |
| Парткод: | P400238449 |
| Деталь: | THERMISTOR-NTC ASSY |
| Парткод: | 1404-001486 |
| Деталь: | THERMOSTAT |
| Парткод: | 4712-001046 |
| Деталь: | LAMP-HALOGEN |
| Парткод: | 4713-001221 |
| Деталь: | LAMP-HALOGEN |
| Парткод: | 4713-001222 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000267 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000282 |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Ring-E |
| Парткод: | 6044-000231 |
| Деталь: | Spring-ES |
| Парткод: | 6107-001323 |
| Деталь: | Spring-ES |
| Парткод: | 6107-001324 |
| Деталь: | Bearing-Ball |
| Парткод: | 6601-001341 |
| Деталь: | Bearing-Ball |
| Парткод: | 6601-001478 |
| Деталь: | Bearing-Ball |
| Парткод: | 6601-001479 |
| Цена: | 1 400 ₽ |
| Деталь: | BUSH-6_D |
| Парткод: | JC61-00423A |
| Деталь: | SPRING ETC-DEVE REAR |
| Парткод: | JC61-00550A |
| Деталь: | BUSH-6_D(L) |
| Парткод: | JC61-00884A |
| Деталь: | BRACKET-FUSER |
| Парткод: | JC61-01915A |
| Деталь: | BRACKET-PR_L |
| Парткод: | JC61-01916A |
| Деталь: | BRACKET-PR_R |
| Парткод: | JC61-01917A |
| Деталь: | BRACKET-HR |
| Парткод: | JC61-01918A |
| Деталь: | BRACKET-FU_DRIVE |
| Парткод: | JC61-01919A |
| Деталь: | HOLDER-LAMP |
| Парткод: | JC61-01920A |
| Деталь: | SUPPORT-BRACKET |
| Парткод: | JC61-01921A |
| Деталь: | BUSH-HR |
| Парткод: | JC61-01928A |
| Деталь: | HOLDER-CONNECTOR |
| Парткод: | JC61-01929A |
| Деталь: | HOLDER-HARNESS |
| Парткод: | JC61-01930A |
| Деталь: | HOLDER-BRACKET |
| Парткод: | JC61-01931A |
| Деталь: | Guide-INPUT |
| Парткод: | JC61-01933A |
| Деталь: | GUIDE-OUTPUT |
| Парткод: | JC61-01934A |
| Деталь: | GUIDE-DUPLEX |
| Парткод: | JC61-01935A |
| Деталь: | GUIDE-ACTUATOR |
| Парткод: | JC61-01938A |
| Деталь: | HOLDER-THERMISTOR |
| Парткод: | JC61-02657A |
| Деталь: | HOLDER-EXIT |
| Парткод: | JC61-02853A |
| Деталь: | Spring ETC-Actuator |
| Парткод: | JC61-70903A |
| Деталь: | Spring Etc-Exit Roll FD |
| Парткод: | JC61-70911A |
| Деталь: | GROUND-LOWER |
| Парткод: | JC63-01307A |
| Деталь: | GROUND-PR |
| Парткод: | JC63-01308A |
| Деталь: | GROUND-UPPER |
| Парткод: | JC63-01309A |
| Деталь: | GROUND-EXIT |
| Парткод: | JC63-01310A |
| Деталь: | COVER-FUSER_UPPER |
| Парткод: | JC63-01311A |
| Деталь: | COVER-FUSER_LOWER |
| Парткод: | JC63-01312A |
| Деталь: | GROUND-PR_SUB |
| Парткод: | JC63-01335A |
| Деталь: | LOCKER-FUSER_R |
| Парткод: | JC64-00309A |
| Деталь: | LOCKER-FUSER_L |
| Парткод: | JC64-00310A |
| Деталь: | HANDLE-FUSER_R |
| Парткод: | JC64-00311A |
| Деталь: | HANDLE-FUSER_L |
| Парткод: | JC64-00312A |
| Деталь: | ROLLER-EXIT IDLE |
| Парткод: | JC66-00608A |
| Деталь: | GEAR-_M_EXIT |
| Парткод: | JC66-00782A |
| Деталь: | ACTUATOR-FUSER |
| Парткод: | JC66-01404A |
| Деталь: | GEAR-FUSER |
| Парткод: | JC66-01405A |
| Деталь: | GEAR-IDLE Z15 |
| Парткод: | JC66-01406A |
| Деталь: | GEAR-IDLE Z39 |
| Парткод: | JC66-01407A |
| Деталь: | ROLLER-FUSER |
| Парткод: | JC66-01410C |
| Деталь: | ROLLER-HEAT |
| Парткод: | JC66-01411A |
| Деталь: | Roller-Pressure |
| Парткод: | JC66-01412B |
| Деталь: | DRUM-FUSER_BELT |
| Парткод: | JC66-01413C |
| Деталь: | LEVER-JAM R |
| Парткод: | JC66-01416A |
| Деталь: | LEVER-JAM_L |
| Парткод: | JC66-01417A |
| Деталь: | ROLLER-EXIT |
| Парткод: | JC66-02111A |
| Деталь: | ROLLER-FD F |
| Парткод: | JC66-02112A |
| Деталь: | ELA-UNIT_CASSETTE |
| Парткод: | JC96-05346A |
| Цена: | 5 300 ₽ |
| Деталь: | FRAME-CASSETTE |
| Парткод: | JC61-02768A |
| Деталь: | MEA-COVER_CASSETTE |
| Парткод: | JC97-03465A |
| Деталь: | GUIDE-PAPER_MPF |
| Парткод: | JC61-01865A |
| Деталь: | ROLLER-IDLE FEED |
| Парткод: | JC66-00764A |
| Деталь: | ELA Unit-Roller P/Up MP |
| Парткод: | JC96-02686B |
| Деталь: | SHAFT-MP_PICK_UP |
| Парткод: | JC66-01348A |
| Деталь: | MEA-HOLDER PAD_MP |
| Парткод: | JC97-02892A |
| Цена: | 500 ₽ |
| Деталь: | MEA-KNOCKJJP PLATE_MP |
| Парткод: | JC97-02891A |
| Деталь: | ACTUATOR-FEED_EMPTY |
| Парткод: | JC66-01403A |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-02239A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | PMO-Bearing Shaft |
| Парткод: | JC72-41191B |
| Цена: | 430 ₽ |
| Деталь: | HARNESS-MP DRAWER_MP |
| Парткод: | JC39-00659A |
| Деталь: | COVER-DRAW_CONNECTOR |
| Парткод: | JC63-01286A |
| Деталь: | INDICATOR-EMPTY |
| Парткод: | JC64-00441A |
| Деталь: | SOLENOID-PICKJJP |
| Парткод: | JC33-00022A |
| Цена: | 600 ₽ |
| Деталь: | MEA-GEAR PICKJP_MP |
| Парткод: | JC97-02893A |
| Деталь: | MEA-GEARjBASE |
| Парткод: | JC97-03466A |
| Деталь: | COVER-GEARjBOX |
| Парткод: | JC63-02075A |
| Деталь: | PLATE-GND-BRKT-GEAR |
| Парткод: | JC61-01923A |
| Деталь: | PMO-LOCKER CST |
| Парткод: | JC72-00983A |
| Деталь: | Roller-Feed |
| Парткод: | JC66-01347A |
| Деталь: | SHEET-MPF |
| Парткод: | JC63-01291A |
| Деталь: | BJSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | HOLDER- M CLUTCH GEAR |
| Парткод: | JC61-01127A |
| Деталь: | GEAR-M-REGI |
| Парткод: | JC66-00774A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001249 |
| Деталь: | HOLDER-jMjGEAR REGI |
| Парткод: | JC61-01128A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | HOLDER-M-PADjHOUSING |
| Парткод: | JC61-01228A |
| Деталь: | MEA-HOLDERjPAD |
| Парткод: | JC97-03467A |
| Деталь: | MEA-GUIDEjREAR |
| Парткод: | JC97-03468A |
| Деталь: | mea-extention |
| Парткод: | JC97-03471A |
| Деталь: | MEA-KNOCK UP |
| Парткод: | JC97-03473A |
| Деталь: | Spring Etc-Plate K/Up |
| Парткод: | JC61-00455A |
| Деталь: | MEA-GUIDEjSIDEjR |
| Парткод: | JC97-03472A |
| Деталь: | GUIDE-SIDEjL |
| Парткод: | JC61-02765A |
| Деталь: | MEA-GUIDE PAPER DUP |
| Парткод: | JC97-02890A |
| Деталь: | GUIDE-M-PAPER SIZE |
| Парткод: | JC61-01227A |
| Деталь: | LINK-DOWNjL |
| Парткод: | JC66-01981A |
| Деталь: | link-down r |
| Парткод: | JC66-01841A |
| Деталь: | SPRING ETC-KNOCK UP MP |
| Парткод: | JC61-70913A |
| Деталь: | GROUND-REGIjBRKT |
| Парткод: | JC63-01282A |
| Деталь: | PMO-Locker Plate |
| Парткод: | JC72-41210A |
| Деталь: | Spring Etc-Locker,Plate |
| Парткод: | JG61-70531A |
| Деталь: | SCREW-TAPPING |
| Парткод: | 6002-000440 |
| Деталь: | GUIDE-PAPERjPATH |
| Парткод: | JC61-02774A |
| Деталь: | GUIDE-PATH |
| Парткод: | JC61-02771A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001003 |
| Деталь: | GUIDE-PAPER L |
| Парткод: | JC61-02830A |
| Деталь: | SPRING ETC-ROLLER |
| Парткод: | JC61-01274A |
| Деталь: | ELA-UNIT_SCF |
| Парткод: | JC96-05347A |
| Деталь: | ELA Unit-Idle_SCF |
| Парткод: | JC96-04019A |
| Деталь: | MEA Unit-P/Up_Housing |
| Парткод: | JC97-02233A |
| Цена: | 460 ₽ |
| Деталь: | MEA Unit-Gear_Pick_Up |
| Парткод: | JC97-03228A |
| Деталь: | As-Unit_Feed1 |
| Парткод: | JC81-03458A |
| Цена: | 460 ₽ |
| Деталь: | ELA Hou-Cst Sensor Hawk16 |
| Парткод: | JC96-02127B |
| Деталь: | MEA Unit-Terminal:TR |
| Парткод: | JC97-01401A |
| Деталь: | ELA-SCF BLDC |
| Парткод: | JC96-05106A |
| Деталь: | ELA HOU-CASSETTE |
| Парткод: | JC96-04954B |
| Деталь: | MEA-GEAR ONEWAY |
| Парткод: | JC97-03270A |
| Деталь: | Shaft-Pick Up_SCF |
| Парткод: | JC66-01277A |
| Деталь: | Ring-CS |
| Парткод: | 6044-000001 |
| Деталь: | HOLDER-PICK_UP_SCF |
| Парткод: | JC61-01743A |
| Деталь: | Spring-TS |
| Парткод: | 6107-001170 |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Shaft-Feed_SCF |
| Парткод: | JC66-01990A |
| Деталь: | GROUND-P_MOTOR_SCF |
| Парткод: | JC63-01137A |
| Деталь: | Sheet-Guide_Path |
| Парткод: | JC63-01163A |
| Деталь: | HOLDER-P-REGI |
| Парткод: | JC61-01579A |
| Деталь: | Bearing-Pick Up |
| Парткод: | JC66-10202A |
| Деталь: | PBA-SUB-SCF |
| Парткод: | JC92-02094A |
| Деталь: | GROUND-P_FRONT_BOTTOM |
| Парткод: | JC63-01136A |
| Деталь: | Foot-ML80 |
| Парткод: | JC61-40001A |
| Деталь: | GROUND-PBA-MAIN |
| Парткод: | JC63-02072A |
| Деталь: | PLATE-GND_FRAME_TOP |
| Парткод: | JC61-01904A |
| Деталь: | PLATE-GND_FRAME_SCF |
| Парткод: | JC61-01903A |
| Деталь: | GROUND-P_SHAFT |
| Парткод: | JC63-01141A |
| Деталь: | PMO-Remove_Lock_CST |
| Парткод: | JC72-01355A |
| Деталь: | GROUND-PBA-BOTTOM |
| Парткод: | JC63-02073A |
| Деталь: | Bar-P_Cross Bottom |
| Парткод: | JC71-00042A |
| Деталь: | COVER-DUMMY_SCF |
| Парткод: | JC63-00686A |
| Деталь: | PMO-ACTUATOR EMPTY SCF |
| Парткод: | JC72-00992A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | COVER-FRONT_SCF |
| Парткод: | JC63-02076A |
| Деталь: | COVER-LEFT-SCF |
| Парткод: | JC63-02078A |
| Деталь: | SOLENOID-PICK UP |
| Парткод: | JC33-00034A |
| Деталь: | COVER_RIGHT_SCF |
| Парткод: | JC63-02077A |
| Деталь: | FRAME-SCF |
| Парткод: | JC61-01902A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | ACTUATOR FEED |
| Парткод: | JC66-01275A |
| Деталь: | Holder-Connector_SCF |
| Парткод: | JC61-01742A |
| Деталь: | RUBBER-NOISE |
| Парткод: | JC73-00278A |
| Деталь: | CIVER-NOISE |
| Парткод: | JC63-02159A |
| Деталь: | SPONGE-COVER_CS |
| Парткод: | JC72-01512A |
| Деталь: | HARNESS-SCF |
| Парткод: | JC39-00973A |
| Деталь: | ELA UNIT-FRAME_LEFT |
| Парткод: | JC96-05415A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | GUIDE-_M_BUSH HARNESS S |
| Парткод: | JC61-01012A |
| Деталь: | SPRING ETC-PTB_C |
| Парткод: | JC61-01883A |
| Деталь: | SPRING ETC-PTB_B |
| Парткод: | JC61-01884A |
| Деталь: | SPRING ETC-DEVE |
| Парткод: | JC61-01885A |
| Деталь: | GUIDE-RAIL-L |
| Парткод: | JC61-01908A |
| Деталь: | FRAME-LEFT |
| Парткод: | JC61-01926A |
| Деталь: | LABEL-BLANK |
| Парткод: | JC68-01503B |
| Деталь: | LABEL(R)-C |
| Парткод: | JC68-01504A |
| Деталь: | LABEL(R)-M |
| Парткод: | JC68-01505A |
| Деталь: | LABEL(R)-Y |
| Парткод: | JC68-01506A |
| Деталь: | ELA UNIT-SUPPORT_CST_L |
| Парткод: | JC96-05422A |
| Деталь: | ELA UNIT-PTB_TERMINAL |
| Парткод: | JC96-05423A |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-000132 |
Коды ошибок
01
02
02-000
02-001
02-002
03
03-006
03-007
03-008
03-015
04
04-001, 04-004
04-002
04-007, 04-010
05
06
07
08
09
10
10-004
10-012
10-013
10-014
10-015
10-016
10-017
10-018,10-019
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Описание
| Error code: | 01 |
| Display: | ERROR CONDITION INVALID HEAD |
| Description: | The ERROR light flashes. |
| Causes: | The printhead was replaced with one that is not a genuine Zebra™ printhead. |
| Remedy: | Install a genuine Zebra printhead. |
| Error code: | 02 |
| Display: | ERROR CONDITION RIBBON OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Remedy: | Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. |
| Error code: | 02-000 |
| Display: | System error: #02-000. Please turn off then on |
| Description: | 1. At warm up, the temperature is less than reference temperature for 20 sec. 2. Abnormal ADC has occurred. 3. ZeroCross Signal detect error has occurred. |
| Causes: | Fuser Unit is not installed and AC is not supplied to the Heat Lamp. |
| Remedy: | 1. In case of meaning 1, replace the Fuser unit. 2. In case of meaning 3, replace the Engine contol board or Fuser control board or SMPS. |
| Error code: | 02-001 |
| Display: | Fuser error: #02-001. Please turn off then on |
| Description: | 1. At warm up, the temperature keep up the lower temperature for regular time. 2. In case that the temperature has not reached warm up temperature after warm-up time. 3. At ready, Less than target temperature and for more than 10 sec. 4. At printing, Less than printing Ref. temp and for more than 10 sec. |
| Remedy: | 1. Check the Thermostat. If it is defective, replace it. 2. Check the Lamp. If it is defective , replace it. 3. Check the fuser connector. Reconnect it. 4. In case of printer input voltage lower than standard voltage. 5. Check the Thermistor. 6. If the Heat On signal is not occurred from Power supply, replace it. |
| Error code: | 02-002 |
| Display: | Fuser error: #02-002. Please turn off then on |
| Description: | 1. At warm up, the temperature keep up the lower temperature for regular time. 2. At warm up, after temperature checking time, more than regular temperature and for more 10 sec. 3. At standby or sleep, more than Top temp and for a few minutes. 4. At power save mode, the temperature keep up the constant for regular time. |
| Causes: | The machine can not control fuser temperature. |
| Remedy: | Replace Fuser or Fuser control board or Engine controller. |
| Error code: | 03 |
| Display: | WARNING RIBBON IN |
| Description: | The ERROR light flashes. |
| Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
| Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
| Error code: | 03-006 |
| Display: | Motor does not operate: #03-006. Please turn off then on |
| Description: | After Black OPC BLDC motor is operated, the ready signal is not occurred within 1 sec. |
| Remedy: | Take out the toner cartridge and shake it horizontally. And re-install it. |
| Error code: | 03-007 |
| Display: | Motor does not operate: #03-007. Please turn off then on |
| Description: | After Color OPC BLDC motor is operated, the ready signal is not occurred within 1 sec. |
| Remedy: | Check the ITB waste toner is eliminated properly. If the ITB waste toner overflows, the motor error will be occurred because of increasing the torque. Replace the developing unit. |
| Error code: | 03-008 |
| Display: | Motor does not operate: #03-008. Please turn off then on |
| Description: | After Color Dev BLDC motor is operated, the ready signal is not occurred within 1 sec. |
| Remedy: | Take out and Shake the developing unit horizontally. And reinstall it. If the problem persists, Replace the developing unit. |
| Error code: | 03-015 |
| Display: | Motor error Error: #03-015 Turn off then on |
| Description: | Fan does not operate. |
| Causes: | Fan is defective. |
| Remedy: | 1. Check the CN17 connector (FAN) on Main PBA. 2. If the FAN is defective, replace it. 3. If the problem persists, replace the Main PBA. |
| Error code: | 04 |
| Display: | ERROR CONDITION PAPER OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
| Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
| Error code: | 04-001, 04-004 |
| Display: | S: LSU error T: Error: #04-001,4,7,10 Turn off then on |
| Description: | After LD on, the Laser beam detect signal is not occurred or irregular. |
| Remedy: | 1. Replace the Main board. 2. If the problem persists after replacing the Main board, replace the LSU unit. |
| Error code: | 04-002 |
| Display: | Error #04-002 Turn off then on |
| Description: | LSU error has occurred |
| Remedy: | 1. Enter the EDC mode. 2. Execute the LSU test. 3. If the LSU does not operate, replace it. |
| Error code: | 04-007, 04-010 |
| Display: | S: LSU error T: Error: #04-001,4,7,10 Turn off then on |
| Description: | After LD on, the Laser beam detect signal is not occurred or irregular. |
| Remedy: | 1. Replace the Main board. 2. If the problem persists after replacing the Main board, replace the LSU unit. |
| Error code: | 05 |
| Display: | ERROR CONDITION HEAD OPEN |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is not fully closed. The head open sensor is not working properly. |
| Remedy: | Replace the sensor. |
| Error code: | 06 |
| Display: | THERMISTOR FAULT |
| Description: | The ERROR light flashes. |
| Causes: | The printhead has a faulty thermistor. |
| Remedy: | Replace the printhead. |
| Error code: | 07 |
| Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
| Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
| Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 08 |
| Display: | WARNING HEAD COLD |
| Description: | The printer prints while the ERROR light flashes. |
| Causes: | The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 09 |
| Display: | WARNING HEAD TOO HOT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is over temperature. |
| Remedy: | Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature. |
| Error code: | 10 |
| Display: | DEFRAGMENTING |
| Description: | The printer stops. |
| Causes: | The printer is defragmenting memory. |
| Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
| Error code: | 10-004 |
| Display: | System error: #10-004. Please turn off then on |
| Description: | UI error |
| Remedy: | 1. check the UI connector. 2. If the problem persists, replace the OPE board. 3. If ther problem persists, replace the maina board. |
| Error code: | 10-012 |
| Display: | Sensor failure: #10-012. Call for service |
| Description: | Sensor error. |
| Remedy: | Check the external temperature sensor and main board. If it is defective, replace it. |
| Error code: | 10-013 |
| Display: | S: Sensor Failure T: Outer temperature sensor Failure #10-013 Turn off then on |
| Description: | There are some effective Outer Temperature sensor value range(Min-Max) on product. - Outer Temp.Short error occurs when Outer Temperature sensor value is under the minimum. - Outer Temp.Open error occurs when Outer Temperature sensor value is over the maximum. |
| Remedy: | 1. Check the CN19 connector on Main-PBA. |
| Error code: | 10-014 |
| Display: | S: Sensor Failure T: Outer temperature sensor Failure #10-014 Turn off then on |
| Description: | There are some effective Outer Temperature sensor value range(Min-Max) on product. - Outer Temp.Short error occurs when Outer Temperature sensor value is under the minimum. - Outer Temp.Open error occurs when Outer Temperature sensor value is over the maximum |
| Remedy: | 1. Check the CN19 connector on Main-PBA. |
| Error code: | 10-015 |
| Display: | S: Sensor Failure T: Humidity sensor has problem #10-015 Turn off then on |
| Description: | There are some effective humidity range(Min-Max) on product. - Humidity Out error occurs when Humidity value is under the minimum. - Humidity Open error occurs when Humidity value is over the maximum. |
| Remedy: | 1. Check the CN19 connector on Main-PBA. |
| Error code: | 10-016 |
| Display: | S: Sensor Failure T: Humidity sensor has problem #10-016 Turn off then on |
| Description: | There are some effective humidity range(Min-Max) on product. - Humidity Out error occurs when Humidity value is under the minimum. - Humidity Open error occurs when Humidity value is over the maximum. |
| Remedy: | 1. Check the CN19 connector on Main-PBA. |
| Error code: | 10-017 |
| Display: | S: Sensor Failure T: Inner temperature sensor Failure #10-017 Turn off then on |
| Description: | inner temperature circuit is open. please reboot the machine. |
| Remedy: | 1. Check the CN19 connector on Main-PBA. |
| Error code: | 10-018,10-019 |
| Display: | S: Sensor Failure T: Inner temperature sensor Failure #-019 Turn off then on |
| Description: | inner temperature circuit is short. please reboot the machine. |
| Remedy: | 1. Check the CN19 connector on Main-PBA. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 12 |
| Description: | General print quality issues |
| Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
| Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
| Error code: | 13 |
| Description: | Long tracks of missing print on several labels |
| Causes: | Print element damaged. |
| Remedy: | Replace the printhead. |
| Error code: | 14 |
| Description: | Wrinkled ribbon |
| Causes: | Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned. |
| Remedy: | See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance. |
| Error code: | 15 |
| Description: | Printing too light or too dark over the entire label |
| Causes: | The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure. |
| Remedy: | Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70. |
| Error code: | 16 |
| Description: | Smudge marks on labels |
| Causes: | The media or ribbon is not designed for high-speed operation. |
| Remedy: | Replace supplies with those recommended for high-speed operation. |
| Error code: | 17 |
| Description: | Misregistration/skips labels |
| Causes: | The printer is not calibrated. Improper label format. |
| Remedy: | Recalibrate the printer. Use correct label format. |
| Error code: | 18 |
| Description: | Misregistration and misprint of one to three labels |
| Causes: | The platen roller is dirty. Media does not meet specifications. |
| Remedy: | See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications. |
| Error code: | 19 |
| Description: | Vertical drift in top-of-form position |
| Causes: | The printer is out of calibration. Vertical drift occurs during normal printer operation. Note • A vertical drift of ± 4 to 6 dot rows (approximately 0.5 mm) is within normal tolerances. The platen roller is dirty. |
| Remedy: | Recalibrate the printer. Calibrate the printer. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. |
| Error code: | 20 |
| Description: | Vertical image or label drift |
| Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
| Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
| Error code: | 21 |
| Description: | The bar code printed on a label does not scan. |
| Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
| Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
| Error code: | 22 |
| Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
| Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
| Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
| Error code: | 23 |
| Description: | Auto Calibrate failed. |
| Causes: | Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly. |
| Remedy: | Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. |
| Error code: | 24 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light does not flash. |
| Causes: | The communication parameters are incorrect. |
| Remedy: | Check the printer driver or software communications settings (if applicable). If you are using serial communication, check the serial port setting in the control panel menu. See Set Serial Communications on page 91. If you are using serial communication, make sure you are using a null modem cable or a null modem adapter. Using the control panel controls, check the protocol setting. It should be set to NONE. See Set Protocol on page 93. If a driver is used, check the driver communication settings for your connection. |
| Error code: | 25 |
| Description: | A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label. |
| Causes: | The serial communication settings are incorrect. |
| Remedy: | Ensure that the flow control settings match. Check the communication cable length. See Table 5 on page 48 for requirements. Check the printer driver or software communications settings (if applicable). |
| Error code: | 26 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light flashes but no printing occurs. |
| Causes: | The prefix and delimiter characters set in the printer do not match the ones in the label format. Incorrect data is being sent to the printer. |
| Remedy: | Verify the prefix and delimiter characters. See Set Format Prefix Character on page 94 and Set Delimiter Character on page 95 for the requirements. Check the communication settings on the computer. Ensure that they match the printer settings. If the problem continues, check the label format. |
| Error code: | 27 |
| Description: | Broken or melted ribbon |
| Causes: | Darkness setting too high. |
| Remedy: | 1. Reduce the darkness setting. 2. Clean the printhead thoroughly. |
| Error code: | 28 |
| Description: | The printer does not detect when the ribbon runs out. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Causes: | The ribbon-out threshold is set too high to detect the ribbon. On a sensor profile, the ribbon-out threshold (circled in Figure 15) appears above the black bars that indicate the ribbon. This happens if you calibrate the printer without ribbon and later insert ribbon without recalibrating the printer or loading printer defaults. |
| Remedy: | 1. Print a sensor profile (see Print Sensor Profile on page 89), and note the location of the ribbon-out threshold (circled in Figure 15). 2. Calibrate the printer, this time using ribbon, or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. Important • Loading defaults resets all printer parameters back to factory defaults. 3. Print another sensor profile, and compare it to the first one. 4. If the ribbon-out threshold is still too high, you may manually change the value. |
| Error code: | 29 |
| Description: | The ribbon light is on even though ribbon is loaded correctly. |
| Causes: | The printer was not calibrated for the label and ribbon being used. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. |
| Error code: | 30 |
| Description: | The LCD displays a language that I cannot read |
| Causes: | The language parameter was changed through the control panel or a firmware command. |
| Remedy: | 1. Press SETUP/EXIT to enter configuration mode. 2. Press MINUS (-). The printer displays the LANGUAGE parameter in the current language. Even if you cannot recognize the characters displayed, you can still scroll to another language. 3. Press SELECT to select the parameter. 4. Press PLUS (+) or MINUS (-) to scroll through the choices until you find a language that you can read. 5. Press SETUP/EXIT. The LCD displays SAVE CHANGES in the original language. 6. Press SETUP/EXIT again to exit configuration mode and save the changes (if the language does not change, you may need to scroll to a different save option by pressing PLUS (+) or MINUS (-) in the previous step). 7. Repeat this process, if necessary, until you reach the desired language. |
| Error code: | 31 |
| Description: | The LCD is missing characters or parts of characters |
| Causes: | The LCD may need replacing. |
| Remedy: | Run the Power-On Self Test on page 117 and check that the LCD display shows all characters. If not, replace the LCD. |
| Error code: | 32 |
| Description: | Changes in parameter settings did not take effect |
| Causes: | Parameters are set incorrectly. A command turned off the ability to change the parameter. A command changed the parameter back to the previous setting. If the problem continues, there may be a problem with the main logic board. |
| Remedy: | 1. Set parameters and save permanently. 2. Turn the printer off (O) and then on (I). Refer to the ZPL Programming Guide. Refer to the ZPL Programming Guide. Replace the main logic board. |
| Error code: | 33 |
| Description: | The printer fails to calibrate or detect the top of the label. |
| Causes: | The printer was not calibrated for the label being used. The printer is configured for continuous media. The driver or software configuration is not set correctly. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. Driver or software settings produce commands that can overwrite the printer configuration. Check the driver or software media-related setting. |
| Error code: | 34 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer was not calibrated for the media being used. The printer is configured for continuous media. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. |
| Error code: | 35 |
| Description: | All lights are on, but nothing displays on the LCD, and the printer locks up. |
| Causes: | Internal electronic or firmware failure. |
| Remedy: | Turn the printer power off (O) and then on (I). If the printer locks up again, replace the main logic board. |
| Error code: | 36 |
| Description: | The printer locks up while running the Power-On Self Test. |
| Causes: | Main logic board failure. |
| Remedy: | Replace the main logic board. |
| Error code: | 37 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer is configured for continuous media. The printer was not calibrated for the media being used. |
| Remedy: | Set the media type to noncontinuous media. See Set Media Type on page 56. Perform the calibration procedure in Calibrate Media and Ribbon Sensors on page 67. |
| Error code: | 38 |
| Description: | All lights are on, but nothing displays on the LCD, and the printer locks up. |
| Causes: | Internal electronic or firmware failure. |
| Remedy: | Turn the printer power Off (O) and then On (I). If the printer locks up again, replace the main logic board. |
| Error code: | 39 |
| Description: | The printer locks up while running the Power-On Self Test. |
| Causes: | Main logic board failure. |
| Remedy: | Replace the main logic board. |
| Error code: | 40 |
| Display: | Scanner locked |
| Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
| Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
| Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
