Samsung SCX-5015
Рейтинг
Модули
Platen Assy
Drive Assy
CASSETTE ASSY
FuserAssy
FEEDER ASSY
ADF Assy or Platen Cover Assy
Pick-up Assy
Exit Assy
Side Cover Assy
MP Assy
Main Frame Assy
Base Frame
MAIN
Детали Base Frame
| Деталь: | ELA HOU-PLATEN ASSY |
| Парткод: | JC96-02754A |
| Деталь: | ELA HOU-PLATEN ASSY |
| Парткод: | TBD |
| Деталь: | MEA UNIT-SCAN UPPER ASSY |
| Парткод: | TBD |
| Деталь: | ELA HOU-SCAN LOWER |
| Парткод: | JC96-02706A |
| Деталь: | ELA HOU-OPE CVER ASSY |
| Парткод: | JC96-02172B |
| Деталь: | ELA HOU-OPE CVER ASSY |
| Парткод: | JC96-02632B |
| Деталь: | ELA HOU-CCD MODULE |
| Парткод: | JC96-02759A |
| Деталь: | A/S MATERAL-DUMMY UPPER ASSY |
| Парткод: | JC81-00426A |
| Деталь: | LABEL(R)-REGISTRATION EDGE (R) |
| Парткод: | JC72-00809A |
| Деталь: | PMO-COVER SCAN UPPER |
| Парткод: | JC72-00758A |
| Деталь: | IPR-HOLDER GLASS |
| Парткод: | JB70-00148A |
| Деталь: | MEA UNIT-GLASS PLATEN ASSY |
| Парткод: | JC97-01580A |
| Деталь: | Belt-Timing Gear |
| Парткод: | 6602-001090 |
| Деталь: | SPRING ETC-BELT |
| Парткод: | JB61-00059A |
| Деталь: | CBF Harness-Ope |
| Парткод: | JC39-00167A |
| Деталь: | CBF HARNESS-MAIN-ENGINE |
| Парткод: | JC39-00030A |
| Деталь: | CBF HARNESS-DRIVER GND |
| Парткод: | JB39-00065A |
| Деталь: | PBA SUB-D_SUB |
| Парткод: | JC92-01381A |
| Деталь: | ELA HOU-SCAN MOTOR |
| Парткод: | JC81-01694A |
| Деталь: | COVER-M-CCD CABLE |
| Парткод: | JC63-00158A |
| Деталь: | COVER-SCAN LOWER(UMAX) |
| Парткод: | JC63-00157A |
| Деталь: | PMO-OPE COVER |
| Парткод: | JC72-00756A |
| Деталь: | RMP-RUBBER FUNCTION |
| Парткод: | JC73-00092A |
| Деталь: | RMO-RUBBER TEL |
| Парткод: | JC73-00043A |
| Деталь: | PMO-KEY TEL |
| Парткод: | JC72-00452B |
| Деталь: | RMO-RUBBER SCROLL |
| Парткод: | JC73-00044A |
| Деталь: | PMO-KEY FUNCTION(A) |
| Парткод: | JC72-00754B |
| Деталь: | PMO-KEY FUNCTION(C) |
| Парткод: | JC63-00079A |
| Деталь: | PMO-KEY SCROLL |
| Парткод: | JC72-00453C |
| Деталь: | PMO-KEY FUNCTION(B) |
| Парткод: | JC72-00455B |
| Деталь: | PBA-OPE(FRO) |
| Парткод: | JC81-00433A |
| Деталь: | IPR-CHANNEL BASE FRAME |
| Парткод: | JC70-00239A |
| Деталь: | HOLDER-M-CCD(UMAX) |
| Парткод: | JC61-00703A |
| Деталь: | PMO-COVER DUMMY LOWER(C) |
| Парткод: | JC72-00794A |
| Деталь: | ICT-INSERT SHAFT |
| Парткод: | JB70-00154A |
| Деталь: | PMO-PULLEY |
| Парткод: | JB72-00763A |
| Деталь: | PMO-HOLDER BELT |
| Парткод: | JB72-00764A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | SHAFT-CCD(UMAX) |
| Парткод: | JC66-00532A |
| Деталь: | PMO-LEVER SENSOR |
| Парткод: | JC72-00755A |
| Деталь: | IPR-BRK SCAN BD |
| Парткод: | JC70-00228A |
| Деталь: | SPRING ETC-EXIT |
| Парткод: | JB61-70939A |
| Деталь: | CBF SIGNAL-CCD FFC |
| Парткод: | JC39-00236A |
| Деталь: | CBF HARNESS-SCAN MOTOR |
| Парткод: | JB39-00077A |
| Деталь: | PMO-KEY REPORT |
| Парткод: | JC72-00457B |
| Деталь: | PMO-KEY STOP |
| Парткод: | JC72-00451B |
| Деталь: | PMO-KEY START |
| Парткод: | JC72-00450B |
| Деталь: | MCT-GLASS ADF |
| Парткод: | JC74-00019A |
| Деталь: | LABEL(L)-REGISTRATION EDGE (L) |
| Парткод: | JB68-00469A |
| Деталь: | PMO-DUMMY UPPER |
| Парткод: | JC72-00759A |
| Деталь: | SHEET-DUMMY UPPER |
| Парткод: | JC63-00074A |
| Деталь: | LABEL(P)-SHEET SHADING |
| Парткод: | JB68-00419A |
| Деталь: | MCT-GLASS SCANNER(LEGAL) |
| Парткод: | JC74-00018A |
| Деталь: | MOTOR STEP-SCAN |
| Парткод: | JB31-00011A |
| Цена: | 1 300 ₽ |
| Деталь: | BRACKET-MOTOR PLATEN |
| Парткод: | JC61-00702A |
| Деталь: | GEAR-TIMING |
| Парткод: | JC66-00531A |
| Деталь: | GEAR-REDUCTION73/37 |
| Парткод: | JC66-00530A |
| Деталь: | ELA HOU-DRIVE ASSY |
| Парткод: | JC96-02741A |
| Деталь: | IPR-BRKT MOTOR |
| Парткод: | JC70-00257A |
| Деталь: | MOTOR-STEP |
| Парткод: | JC31-00020B |
| Деталь: | CBF-HARNESS-MOTOR |
| Парткод: | JC39-00165A |
| Деталь: | Ring-E |
| Парткод: | 6044-000159 |
| Деталь: | Solenoid-Duplex |
| Парткод: | JC33-00008A |
| Деталь: | SPRING SOLENOID DP |
| Парткод: | JC61-70915A |
| Деталь: | IPR-LINK SOLENOID |
| Парткод: | JC70-00258A |
| Деталь: | GEAR-EXIT/U,ID |
| Парткод: | JC66-40211B |
| Деталь: | GEAR-SWING DRV |
| Парткод: | JC66-00349A |
| Деталь: | GEAR-35/19 |
| Парткод: | JC66-00350A |
| Деталь: | GEAR-71/23 |
| Парткод: | JC66-00345A |
| Деталь: | GEAR-DEVE DRV |
| Парткод: | JC66-00338A |
| Деталь: | PMO-DEV/COUPLING |
| Парткод: | JC72-00743A |
| Деталь: | GEAR-RDCN,OPC |
| Парткод: | JC66-00351A |
| Деталь: | GEAR-86/23 |
| Парткод: | JC66-00337A |
| Деталь: | GEAR-RDCN FEED OUTER |
| Парткод: | JC66-00343A |
| Деталь: | GEAR-HUB CLUTCH |
| Парткод: | JC66-00340A |
| Цена: | 220 ₽ |
| Деталь: | GEAR-RDCN FEED INNER |
| Парткод: | JC66-00342A |
| Деталь: | GEAR-FEED DRV |
| Парткод: | JC66-00348A |
| Деталь: | GEAR-OPC DRV |
| Парткод: | JC66-00347A |
| Деталь: | GEAR-GEAR FUSER DRV OUTER |
| Парткод: | JC66-00334A |
| Деталь: | GEAR-FUSER DRV INNER |
| Парткод: | JC66-00333A |
| Деталь: | Ring-E |
| Парткод: | 6044-000231 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | MEC-CASSETTE ASSY(LETTER) |
| Парткод: | JC97-01733A |
| Деталь: | MEC-CASSETTE ASSY(A4) |
| Парткод: | JC97-01734A |
| Деталь: | IPR-FINGE |
| Парткод: | JC70-00451A |
| Деталь: | IPR-GUIDE PLT PAPER |
| Парткод: | JC70-10923A |
| Деталь: | IPR-PLATE K/UP |
| Парткод: | JC70-00221A |
| Деталь: | IPR-SPR PLT G/SIDE |
| Парткод: | JC70-00451A |
| Деталь: | PMO-COVER CASSETTE |
| Парткод: | JC72-00713A |
| Деталь: | PMO-FRAME CASSETTE |
| Парткод: | JC72-00716A |
| Деталь: | PMO-GUIDE FRONT CST |
| Парткод: | JC72-00798A |
| Деталь: | PMO-GUIDE REAR |
| Парткод: | JC72-00717A |
| Деталь: | PMO-GUIDE/SIDE CST |
| Парткод: | JC72-40967D |
| Деталь: | PMO-Locker Plate |
| Парткод: | JC72-41210A |
| Деталь: | PRP-PAD CAST |
| Парткод: | JC73-10910A |
| Деталь: | SPRING-LOCKER PLATE |
| Парткод: | JG61-70531A |
| Деталь: | SPRING-PLATE K/UP |
| Парткод: | JC61-00455A |
| Деталь: | LABEL(R)-INSTRUCTION CST |
| Парткод: | JC68-00692A |
| Деталь: | LABEL(R)-HEIGHT CST |
| Парткод: | JC68-00709A |
| Деталь: | SHEET-CASSETTE |
| Парткод: | JC63-00216A |
| Деталь: | ELA HOU-FUSER(110V)ASSY |
| Парткод: | JC96-02739A |
| Деталь: | ELA HOU-FUSER(220V)ASSY |
| Парткод: | JC96-02740A |
| Деталь: | PMO-UPPER FUSER |
| Парткод: | JC72-00812A |
| Деталь: | RMO-ROLLER HEAT |
| Парткод: | JC73-00093A |
| Деталь: | PMO-BEARING H/R-F |
| Парткод: | JC72-00814A |
| Цена: | 290 ₽ |
| Деталь: | BEARING-H/R L |
| Парткод: | JC66-10902A |
| Цена: | 330 ₽ |
| Деталь: | GEAR-FUSER |
| Парткод: | JC66-40913B |
| Деталь: | MEA UNIT-CLAW ASSY |
| Парткод: | JC97-01577A |
| Деталь: | PEX-ROLLER EXIT F-UP |
| Парткод: | JC72-20901A |
| Деталь: | IPR-PIN ROLLER EXIT |
| Парткод: | JC70-00064A |
| Деталь: | NPR-ELECTRODE GEAR |
| Парткод: | JC71-00029A |
| Деталь: | NPR-ELECTRODE M |
| Парткод: | JC71-00030A |
| Деталь: | NPR-ELECTRODE F |
| Парткод: | JC71-00028A |
| Деталь: | THERMOSTAT |
| Парткод: | 4712-000001 |
| Деталь: | THERMISTOR-FUSER |
| Парткод: | JC14-00001A |
| Деталь: | LAMP-HALOGEN (110V) |
| Парткод: | 4713-001170 |
| Деталь: | LAMP-HALOGEN(220V) |
| Парткод: | 4713-001171 |
| Деталь: | PMO-LOWER FUSER |
| Парткод: | JC72-00820A |
| Деталь: | BEARING-PRESSURE/R |
| Парткод: | JC66-10901A |
| Цена: | 140 ₽ |
| Деталь: | RMO-ROLLER PRESSURE |
| Парткод: | JC73-00094A |
| Деталь: | PMO-LEVER JAM R |
| Парткод: | JC72-00819A |
| Деталь: | PMO-LEVER JAM F |
| Парткод: | JC72-00818A |
| Деталь: | PMO-GUIDE INPUT |
| Парткод: | JC72-00817A |
| Деталь: | IPR-GROUND FU |
| Парткод: | JC70-00259A |
| Деталь: | PMO-ACTUATOR EXIT |
| Парткод: | JC72-00810A |
| Деталь: | ACTUATOR ASSY |
| Парткод: | JC97-01611A |
| Деталь: | PMO-ARM ACTUATOR |
| Парткод: | JC72-00811A |
| Деталь: | SPRING-PR(7300) |
| Парткод: | JC61-00056A |
| Деталь: | LABEL(R)-HV FUSER |
| Парткод: | JC68-00407A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000119 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | SPRING-SAPERATION |
| Парткод: | JC61-70909A |
| Деталь: | PMO-GUIDE CLAW |
| Парткод: | JC72-00376A |
| Деталь: | MEC-FEED ASSY |
| Парткод: | JC75-00143A |
| Деталь: | PMO-FRAME FEED |
| Парткод: | JC72-00821A |
| Деталь: | Gear-Feed |
| Парткод: | JC66-00332A |
| Деталь: | GEAR-MP/DUP DRV |
| Парткод: | JC66-00346A |
| Деталь: | ICT-SHAFT FEED |
| Парткод: | JC70-00267A |
| Деталь: | PMO-BUSHING_P/U,MP |
| Парткод: | JC72-41364A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Ring-CS |
| Парткод: | 6044-000001 |
| Деталь: | PMO-BRKT FEED |
| Парткод: | JC72-00720A |
| Деталь: | PMO-ROLLER FEED |
| Парткод: | JC72-00727A |
| Деталь: | PMO-HOLDER PINCH C |
| Парткод: | JC72-00723A |
| Деталь: | PMO-HOLDER PINCH SUB |
| Парткод: | JC72-00725A |
| Деталь: | PMO-ROLLER FEED L |
| Парткод: | JC72-40261A |
| Деталь: | SPRING-FEED CAST |
| Парткод: | JC61-00480A |
| Деталь: | PMO-HOLDER PINCH M |
| Парткод: | JC72-00724A |
| Деталь: | PMO-SUB HOLDER FEED |
| Парткод: | JC72-40266A |
| Деталь: | SPRING-FEED MP |
| Парткод: | JC61-00481A |
| Деталь: | Washer-Plain |
| Парткод: | 6031-000021 |
| Деталь: | PMO-ROLLER FEED S |
| Парткод: | JC72-40262A |
| Деталь: | IPR-SHAFT FEED IDLER |
| Парткод: | JC70-10230A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | ELA HOU-ADF ASSY |
| Парткод: | JC96-02750A |
| Деталь: | MEA UNIT-PLATEN COVER ASSY(C) |
| Парткод: | JC97-01680B |
| Деталь: | MEC UNIT-PLATEN COVER ASSY |
| Парткод: | JC96-02722A |
| Деталь: | PMO-COVER PLATEN(C) |
| Парткод: | JC72-00873A |
| Деталь: | MEA UNIT-ADF UPPER ASSY |
| Парткод: | JC97-01581A |
| Деталь: | PMO-COVER DUMMY PLAEN |
| Парткод: | JC72-00874B |
| Деталь: | MEA UNIT-ADF LOWER ASSY |
| Парткод: | JC81-00434A |
| Деталь: | PPR-SPONG SHEET |
| Парткод: | JC72-00751A |
| Деталь: | MEA UNIT-ADF MOTOR ASSY |
| Парткод: | JC81-00435A |
| Деталь: | MEA UNIT-HINES ASSY(C) |
| Парткод: | JC97-01681A |
| Деталь: | MEC UNIT-PICK UP ASSY |
| Парткод: | JC97-01582A |
| Деталь: | CBF HARNESS-D-SUB |
| Парткод: | JC39-00190A |
| Деталь: | PMO-COVER OPEN |
| Парткод: | JC72-00737A |
| Деталь: | PMO-COVER SIDE L |
| Парткод: | JC72-00739A |
| Деталь: | PMO-COVER SIDE R |
| Парткод: | JC72-00740A |
| Деталь: | PMO-GUIDE PAPER |
| Парткод: | JC72-00843A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | PMO-TX STACKER |
| Парткод: | JC72-00745A |
| Деталь: | IPR-WASHER SPRING CY |
| Парткод: | JF70-10616A |
| Деталь: | PMO-DOC GUIDE L |
| Парткод: | JC72-00839B |
| Деталь: | PMO-DOC GUIDE R |
| Парткод: | JC72-00838B |
| Деталь: | GEAR PINION |
| Парткод: | JF72-41354A |
| Деталь: | MEA UNIT-HINGE |
| Парткод: | JC97-01731A |
| Деталь: | ROLLER EXIT |
| Парткод: | JC73-00091A |
| Деталь: | IPR-SHAFT EXIT |
| Парткод: | JC72-00242A |
| Деталь: | NPR-SPRING PINCH DRIVE |
| Парткод: | JB71-00038A |
| Деталь: | COVER ADF UPPER |
| Парткод: | JC72-00736A |
| Деталь: | ADF RUBBER |
| Парткод: | JC73-00052A |
| Деталь: | HOLDER ADF |
| Парткод: | JB72-00825A |
| Деталь: | SPONG ADF |
| Парткод: | JB73-00913A |
| Деталь: | SPRIG ADF |
| Парткод: | JB61-00009A |
| Деталь: | SPRING TORSION DOC |
| Парткод: | JB61-00076A |
| Деталь: | E-ring |
| Парткод: | 6044-000159 |
| Деталь: | GEAR-ADF 38 |
| Парткод: | JB66-00103A |
| Цена: | 260 ₽ |
| Деталь: | PMO-BUSH |
| Парткод: | JB72-00819A |
| Деталь: | MEC-ROLLER DRIVE |
| Парткод: | JC75-00149A |
| Деталь: | COVER ADF LOWER |
| Парткод: | JC72-00735A |
| Деталь: | PMO-ACTUATOR SENSOR DOC. |
| Парткод: | JC72-00837A |
| Деталь: | PMO-ACTUATOR SENSOR REGI |
| Парткод: | JB72-00747A |
| Деталь: | MEC-ROLLER EXIT |
| Парткод: | JC75-00150A |
| Деталь: | GEAR CLUTCH 29 |
| Парткод: | JB66-00101A |
| Деталь: | BRKT ADF MOTOR |
| Парткод: | JC70-00224A |
| Деталь: | PMO-WHITE CLUTCH SUB 29 |
| Парткод: | JB72-00844A |
| Деталь: | GEAR-CLUTCH IDLE 39 |
| Парткод: | JC66-00322A |
| Деталь: | GEAR DOUBLE 33/20 |
| Парткод: | JG61-40038A |
| Деталь: | GEAR-DOUBLE 17/35 |
| Парткод: | JG66-40039A |
| Деталь: | GEAR IDLE 25 |
| Парткод: | JG66-40036A |
| Деталь: | MOTOR ADF |
| Парткод: | JC31-00017A |
| Деталь: | PMO-COVER PLATEN |
| Парткод: | JC72-00738A |
| Деталь: | PPR-SHEET PLATEN |
| Парткод: | JC72-00750A |
| Деталь: | IPR-SPRING PINCH |
| Парткод: | JC70-00260A |
| Деталь: | IPR-SHAFT PINCH |
| Парткод: | JC70-00265A |
| Деталь: | PMO-ROLL PINCH |
| Парткод: | JG72-40663A |
| Деталь: | BUSHING HOLDER |
| Парткод: | JG72-40732A |
| Деталь: | SPRING CLUTCH |
| Парткод: | JC61-00062A |
| Деталь: | GEAR-EXITE 23 |
| Парткод: | JC66-00323A |
| Деталь: | SPRING WHITE BAR |
| Парткод: | TBD |
| Деталь: | BRKT WHITE BAR |
| Парткод: | JC70-00225A |
| Деталь: | PPR-WHITE BAR SHEET |
| Парткод: | JC72-00752A |
| Деталь: | PMO-ACTUATOR SENSOR REGI |
| Парткод: | JC72-00747A |
| Деталь: | PBA SUB-ADF |
| Парткод: | JC81-00437A |
| Деталь: | PBA SUB-ADF POS SEN |
| Парткод: | JC92-01365A |
| Деталь: | PBA SUB-ADF DET SEN |
| Парткод: | JC92-01366A |
| Деталь: | CBF HARNESS-ADF ROLLER GND |
| Парткод: | TBD |
| Деталь: | CBF HARNESS-DRIVER GND |
| Парткод: | JB39-00065A |
| Деталь: | PMO-ACTUATOR SENSOR SCAN |
| Парткод: | JC72-00746A |
| Деталь: | GEAR-JAM REMOVE |
| Парткод: | JC66-00329A |
| Деталь: | GEAR REDUCTION45/19 |
| Парткод: | JC66-00324A |
| Деталь: | ELA HOU-PICKUP ASSY |
| Парткод: | JC96-02715A |
| Деталь: | IPR-GND FEED |
| Парткод: | JC70-00238A |
| Деталь: | IPR-GND INPUT |
| Парткод: | JC70-00235A |
| Деталь: | IPR-GUIDE INPUT |
| Парткод: | JC70-00222A |
| Деталь: | PMO-Actuator Empty |
| Парткод: | JC72-00719A |
| Деталь: | PBA SUB-TONER_TX |
| Парткод: | JC92-01359A |
| Деталь: | PBA SUB-PTL |
| Парткод: | JC92-01361A |
| Деталь: | PMO-FEED SENSOR |
| Парткод: | JC72-00721A |
| Деталь: | PMO-GUIDE PAPER |
| Парткод: | JC72-00722A |
| Деталь: | PMO-HOLDER SENSOR FEED |
| Парткод: | JC72-00726A |
| Деталь: | PMO-LENS TONER SENSOR |
| Парткод: | JC72-00803A |
| Деталь: | PMO-PTL PATH |
| Парткод: | JC72-00822A |
| Деталь: | PBA SUB-FEED+PEMP SEN. |
| Парткод: | JC92-01363A |
| Деталь: | MEC-EXIT ASSY |
| Парткод: | JC75-00145A |
| Деталь: | PMO-GUIDE-EXIT UPPER |
| Парткод: | JC72-00708A |
| Деталь: | PMO-GUIDE-EXIT LOWER |
| Парткод: | JC72-00710A |
| Деталь: | PMO-GUIDE-JAM REMOVE |
| Парткод: | JC72-00712A |
| Деталь: | MEC-ROLLER EXIT DRV |
| Парткод: | JC75-00127A |
| Деталь: | PMO-ROLLER DECURL |
| Парткод: | JC72-00833A |
| Деталь: | PMO-PULLEY DUPLEX |
| Парткод: | JC72-40980A |
| Деталь: | Belt-Timing Gear |
| Парткод: | 6602-001084 |
| Деталь: | GEAR-DUPLEX |
| Парткод: | JC66-40912A |
| Деталь: | PMO-BEARING LARGE DP |
| Парткод: | JC72-40978A |
| Деталь: | IPR-GROUND-EXIT |
| Парткод: | JC70-00252A |
| Деталь: | ICT-SHAFT-EXIT LOWER ID |
| Парткод: | JC70-00274A |
| Деталь: | PMO-ROLLER_EXIT |
| Парткод: | JC72-40361A |
| Деталь: | SPRING-EXIT ROLL FD |
| Парткод: | JC61-70911A |
| Деталь: | PMO-Holder Exit Roll |
| Парткод: | JC72-41006A |
| Деталь: | PMO-Roller FD F |
| Парткод: | JC72-41007A |
| Деталь: | PMO-Roller FD R |
| Парткод: | JC72-41008A |
| Деталь: | SPRING-EXIT LOWER IDLE |
| Парткод: | JC61-00484A |
| Деталь: | MEC- BRUSH ANTISTATIC |
| Парткод: | JC75-00095A |
| Деталь: | PBA SUB-BIN-FULL SENSOR |
| Парткод: | TBD |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | ELA HOU-SIDE COVER ASSY |
| Парткод: | JC96-02183B |
| Деталь: | MEA UNIT-DUPLEX ASSY |
| Парткод: | JC97-01578A |
| Деталь: | IPR-PLATE SAW |
| Парткод: | JC70-10232A |
| Деталь: | PMO-FEED FRAME |
| Парткод: | JC72-00731A |
| Деталь: | PMO-HOLDER SAW |
| Парткод: | JC72-41213A |
| Деталь: | IPR-BRACKET GUIDE A |
| Парткод: | JC70-00229A |
| Деталь: | PMO-LOCKER SIDE R |
| Парткод: | JC72-00763A |
| Деталь: | PMO-LOCKER OPEN |
| Парткод: | TBD |
| Деталь: | SPRING-LOCKER TORSION |
| Парткод: | JC61-00479A |
| Деталь: | SPRING-FEED |
| Парткод: | JC61-00478A |
| Деталь: | MEC UNIT-TRAY ASSY |
| Парткод: | JC97-01577A |
| Деталь: | CBF HARNESS-OPE GND |
| Парткод: | JC39-00036A |
| Деталь: | PMO-TIE STOPPER |
| Парткод: | JC72-00766A |
| Деталь: | IPR-BRKT GROUND B |
| Парткод: | JC70-00230A |
| Деталь: | IPR-BRKT GROUND TR |
| Парткод: | JC70-00231A |
| Деталь: | IPR-BRKT GROUND A |
| Парткод: | JC70-00232A |
| Деталь: | IPR-BRACKET GUIDE B |
| Парткод: | JC70-00234A |
| Деталь: | PMO-Bushing Feed |
| Парткод: | JC72-00730A |
| Деталь: | PMO-GUIDE DP SIDE |
| Парткод: | JC72-00806A |
| Деталь: | Ring-CS |
| Парткод: | 6044-000001 |
| Деталь: | SPRING-FUSER EXIT |
| Парткод: | JC61-70976A |
| Деталь: | GEAR-DUP IDLER 17 |
| Парткод: | JC66-00341A |
| Деталь: | GEAR-MP/DUP DRV |
| Парткод: | JC66-00346A |
| Деталь: | IPR-BRKT G DUP |
| Парткод: | JC70-00233A |
| Деталь: | PMO-GP LOWER DP |
| Парткод: | JC72-00732A |
| Деталь: | PMO-SHAFT DUP DRIVER |
| Парткод: | JC72-00764A |
| Деталь: | PMO-ROLLER_EXIT |
| Парткод: | JC72-40361A |
| Деталь: | RPR-RUBBER EXIT |
| Парткод: | JC73-10203A |
| Деталь: | PMO-BUSHING TX(B4) |
| Парткод: | JG72-40744A |
| Деталь: | PMO-TRAY CASE, MP |
| Парткод: | JC72-00776A |
| Деталь: | PMO-SIDE EXIT, MP |
| Парткод: | JC72-00778A |
| Деталь: | PMO-SIDE GUIDE, MP |
| Парткод: | TBD |
| Деталь: | PMO-TRAY COVER, MP |
| Парткод: | JC72-00777A |
| Деталь: | IPR-GUIDE LATCH, MP |
| Парткод: | JB70-10906A |
| Деталь: | PMO-TRAY LINK,MP |
| Парткод: | JC72-00857A |
| Деталь: | LABEL(R)-HEIGHT,MP |
| Парткод: | JC68-00697A |
| Деталь: | ELA HOU-MP ASSY |
| Парткод: | JC96-02182A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000119 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000266 |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Solenoid-MP |
| Парткод: | JC33-00006A |
| Деталь: | SPRING--CAM MP |
| Парткод: | JC61-00003A |
| Деталь: | SPRING-PICK UP MP |
| Парткод: | JC61-00041A |
| Деталь: | SPRING-KNOCKUP,MP |
| Парткод: | JC61-00483A |
| Деталь: | IPR-BRACKET SOLENOIDE |
| Парткод: | JC70-00237A |
| Деталь: | PMO-HOLDER CAM MPF |
| Парткод: | JC72-00055A |
| Деталь: | PMO-GEAR P/U MPF |
| Парткод: | JC72-00056A |
| Деталь: | PMO-ROLLER CAM.MP |
| Парткод: | JC72-00761A |
| Деталь: | PMO-ACTUAT OR,MP |
| Парткод: | JC72-00767A |
| Деталь: | PMO-ADJUSTER,MP |
| Парткод: | JC72-00768A |
| Деталь: | PMO-CAM PICK UP,MP |
| Парткод: | JC72-00769A |
| Деталь: | PMO-FRAME,MP |
| Парткод: | JC72-00770A |
| Деталь: | PMO-HOLDER PAD,MP |
| Парткод: | JC72-00771A |
| Деталь: | PMO-HOLDER SENSOR,MP |
| Парткод: | JC72-00772A |
| Деталь: | PMO-HOUSING PICK UP,MP |
| Парткод: | JC72-00773A |
| Деталь: | PMO-PLATE KNOCK UP,MP |
| Парткод: | JC72-00775A |
| Деталь: | PMO-IDLE PICK UP,MP |
| Парткод: | JC72-41027A |
| Деталь: | RPR-RUBBER PICK UP,MP |
| Парткод: | JC73-00089A |
| Деталь: | RPR-RCT-PAD-PICKURMP |
| Парткод: | JC73-00090A |
| Деталь: | RPR-PAD KNOCK UP,MP |
| Парткод: | JC73-10906A |
| Деталь: | PBA Sub-Mp Sen |
| Парткод: | JC92-01362A |
| Деталь: | PMO-BUSHING PICKUP,MP |
| Парткод: | JC72-41364A |
| Деталь: | A/S MATERAL-PICKUP,MP |
| Парткод: | JC81-00427A |
| Деталь: | ELA HOU-FRAME MAIN ASSY |
| Парткод: | JC96-02184A |
| Деталь: | PMO-HOUSING TERMINAL |
| Парткод: | JC72-00802A |
| Деталь: | IPR-TERMINAL BLADE |
| Парткод: | JC70-00269A |
| Деталь: | IPR-TERMINAL SUPPLY |
| Парткод: | JC70-00270A |
| Деталь: | IPR-TERMINAL TR |
| Парткод: | JC70-00271A |
| Деталь: | IPR-TERMINAL GND |
| Парткод: | JC70-00272A |
| Деталь: | IPR-TERMINAL DEVE KEY |
| Парткод: | JC70-00273A |
| Деталь: | CBF-HARNESS-DEV-ID |
| Парткод: | JC39-00166A |
| Деталь: | CBF-HARNESS-BLADE+SUPPLY+DEV |
| Парткод: | JC39-00170A |
| Деталь: | CBF-HARNESS-MAIN-THV WIRE |
| Парткод: | JC39-00168A |
| Деталь: | SCREW-TAPTITE,M3*8 BLACK,BINDER |
| Парткод: | 6003-000119 |
| Деталь: | CBF-HARNESS-MAIN-MHV WIRE |
| Парткод: | JC39-00169A |
| Деталь: | PMO-FRAME MAIN |
| Парткод: | JC72-00800A |
| Деталь: | PMO-LENS TONER SENSOR |
| Парткод: | JC72-00803A |
| Деталь: | IPR-GND EXIT |
| Парткод: | JC70-00214A |
| Деталь: | IPR-GND OPC |
| Парткод: | JC70-00216A |
| Деталь: | IPR-GND OPC BASE |
| Парткод: | JC70-00217A |
| Деталь: | IPR-GND FUSER |
| Парткод: | JC70-00215A |
| Деталь: | IPR-GUARD C/O S/W |
| Парткод: | JC70-00218A |
| Деталь: | IPR-GND TERMINAL |
| Парткод: | JC70-00219A |
| Деталь: | CBF HARNESS-AC WIRE |
| Парткод: | JC39-00171A |
| Деталь: | CBF-HARNESS |
| Парткод: | JC81-00438A |
| Деталь: | CBF-HARNESS MOTOR |
| Парткод: | JB39-00017A |
| Деталь: | PBA Sub-Exit Sensor |
| Парткод: | JC92-01364A |
| Деталь: | PBA SUB-TONER_RX |
| Парткод: | JC92-01360A |
| Деталь: | GEAR-EXIT/U,ID |
| Парткод: | JC66-40211B |
| Деталь: | GEAR-EXIT,IDLE(Z17) |
| Парткод: | JC66-40964A |
| Цена: | 500 ₽ |
| Деталь: | CBF-HARNESS THERMISTOR_JOINT |
| Парткод: | JC39-00164A |
| Деталь: | PMO-HOUSING TERMINAL |
| Парткод: | JC72-41010A |
| Деталь: | IPR-TERMINAL FU |
| Парткод: | JC70-10961A |
| Деталь: | PMO-CAP CONNECTOR L |
| Парткод: | JC72-00463A |
| Деталь: | PMO-CAP CONNECTOR U |
| Парткод: | JC72-00465A |
| Деталь: | ELA HOU-MOTOR GND |
| Парткод: | JC96-01579A |
| Деталь: | SPRING-CLUTCH |
| Парткод: | JB61-70922A |
| Деталь: | Ring-CS |
| Парткод: | 6044-000001 |
| Деталь: | ELA HOU-BASE FRAME |
| Парткод: | JC96-02818A |
| Деталь: | ELA HOU-BASE FRAME |
| Парткод: | JC96-02818B |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-001256 |
| Деталь: | SPRING ETC-TORSION |
| Парткод: | JC61-00486A |
| Деталь: | Foot-ML80 |
| Парткод: | JC61-40001A |
| Деталь: | CAM-CATCH |
| Парткод: | JC66-00050A |
| Деталь: | IPR-CHANNEL BASE FRAME |
| Парткод: | JC70-00239A |
| Деталь: | IPR-GROUND PLATE A(OPC) |
| Парткод: | JC70-00240A |
| Деталь: | IPR-GROUND PLATE B(BASE) |
| Парткод: | JC70-00241A |
| Деталь: | PMO-BASE FRAME |
| Парткод: | JC72-00779A |
| Деталь: | PMO-BRACKET PUSH DEVE |
| Парткод: | JC72-00780A |
| Деталь: | PMO-BRACKET SIDE OPEN |
| Парткод: | JC72-00781A |
| Деталь: | PMO-COVER FRONT DUMMY |
| Парткод: | JC72-00785A |
| Деталь: | ELA M/M-AUD SPEAKER |
| Парткод: | JC96-01607A |
| Деталь: | SPRING ETC-DEVE REAR |
| Парткод: | JC61-00550A |
| Деталь: | CBF HARNESS-OPC GND |
| Парткод: | JC39-00179A |
| Деталь: | FAN-DC(LSU) |
| Парткод: | JC31-00026A |
| Деталь: | SPRING ETC-DEVE FRONT |
| Парткод: | JC61-00551A |
| Деталь: | SHEET-BASE FRAME |
| Парткод: | JC63-00242A |
| Деталь: | SCREW-TAPPING |
| Парткод: | 6002-000209 |
| Деталь: | SCANNER ASSY |
| Парткод: | JC96-02723A |
| Деталь: | SCANNER ASSY |
| Парткод: | JC96-02745A |
| Деталь: | SCANNER ASSY |
| Парткод: | JC96-02787A |
| Деталь: | MEA UNIT-COVER PA EXIT ASSY |
| Парткод: | JC97-01556B |
| Деталь: | MEC-CASSETTE ASSY(LETTER) |
| Парткод: | JC97-01733A |
| Деталь: | MEC-CASSETTE ASSY(A4) |
| Парткод: | JC97-01734A |
| Деталь: | MEA UNIT-COVER FRONT ASSY |
| Парткод: | JC97-01735A |
| Деталь: | UNIT-LSU |
| Парткод: | JC59-00014B |
| Деталь: | SMPS-SMPS(V1)+HVPS |
| Парткод: | JC44-00031A |
| Деталь: | SMPS-SMPS(V2)+HVPS |
| Парткод: | JC44-00035A |
| Деталь: | ELA-OPC UNIT SET |
| Парткод: | JC96-02238A |
| Деталь: | ELA-TONER UNIT SET |
| Парткод: | JC96-02286A |
| Деталь: | ELA-TONER UNIT SET |
| Парткод: | JC96-02239A |
| Деталь: | ELA HOU-PICKUP ASSY |
| Парткод: | JC96-02715A |
| Деталь: | ELA HOU-SIDE COVER ASSY |
| Парткод: | JC96-02183B |
| Деталь: | ELA HOU-MP ASSY |
| Парткод: | JC96-02182A |
| Деталь: | ELA HOU-BASE FRAME ASSY |
| Парткод: | JC96-02714A |
| Деталь: | ELA HOU-BASE FRAME ASSY |
| Парткод: | JC96-02714B |
| Деталь: | MEC-FEED ASSY |
| Парткод: | JC75-00143A |
| Деталь: | ELA HOU-FUSER(110V)ASSY |
| Парткод: | JC96-02814A |
| Деталь: | ELA HOU-FUSER(220V)ASSY |
| Парткод: | JC96-02815A |
| Деталь: | ELA HOU-FRAME MAIN ASSY |
| Парткод: | JC96-02184A |
| Деталь: | MEC-EXIT ASSY |
| Парткод: | JC75-00145A |
| Деталь: | ELA HOU-DRIVE ASSY |
| Парткод: | JC96-02741A |
| Деталь: | MEA UNIT-COVER REAR ASSY |
| Парткод: | JC97-01557A |
| Деталь: | PBA MAIN-MAIN |
| Парткод: | JC92-01479A |
| Деталь: | PBA MAIN-MAIN |
| Парткод: | JC92-01480A |
| Деталь: | PMO-CONNECT PAPER MFP |
| Парткод: | JC63-00215A |
| Деталь: | PMO-CONNECT PAPER MFP |
| Парткод: | JC63-00215B |
| Деталь: | ELA HOU-DUCT FAN |
| Парткод: | JC96-02311A |
| Деталь: | SHEET-OVERLAY(ENGLISH) |
| Парткод: | JC63-00218A |
| Деталь: | SHEET-OVERLAY(ENGLISH) |
| Парткод: | JC63-00212A |
| Деталь: | SHEET-OVERLAY(SPANISH) |
| Парткод: | JC63-00218B |
| Деталь: | SHEET-OVERLAY(SPANISH) |
| Парткод: | JC63-00212B |
| Деталь: | CBF POWER STITCH GRAY |
| Парткод: | JC39-00055B |
| Деталь: | SOLENOID-PICK UP |
| Парткод: | JC33-00007A |
| Деталь: | PMO-COVER EXIT REAR |
| Парткод: | JC72-00790A |
| Деталь: | MEA UNIT GUIDE CST PA ASSY |
| Парткод: | JC97-01575A |
| Деталь: | PBA LIU |
| Парткод: | JC92-01355A |
| Деталь: | PBA LIU |
| Парткод: | JC92-01355B |
| Деталь: | PBA LIU |
| Парткод: | JC92-01355C |
| Деталь: | PMO-DUMMY BASE FRAME |
| Парткод: | JC72-00789A |
| Деталь: | IPR-SHIELD MAIN LOWER |
| Парткод: | JC63-00188A |
| Деталь: | PMO-COVER FEED AY |
| Парткод: | JC72-00801A |
| Деталь: | PMO-COVER BRKT MOTER |
| Парткод: | JC72-00834A |
| Деталь: | PMO-GUIDE PAPER OUT |
| Парткод: | JC72-00835A |
| Деталь: | PMO-DUCT FAN |
| Парткод: | JC72-00807A |
| Деталь: | CBF HARNESS-LSU |
| Парткод: | JC39-00163A |
| Деталь: | CBF HARNESS-POWER+HVPS |
| Парткод: | JC39-00162A |
| Деталь: | CBF HARNESS-LIU |
| Парткод: | JB39-00104A |
| Деталь: | CBF Harness-Liu Gnd |
| Парткод: | JB39-00103A |
| Деталь: | CBF HARNESS-INLET(XEROX) |
| Парткод: | JC39-00172A |
| Деталь: | IPR-SHIELD SMPS UPPER |
| Парткод: | JC70-00248A |
| Деталь: | PMO-BUSHING P/U.MP |
| Парткод: | JC72-41360A |
| Деталь: | MEA UNIT-PICKUP ROLLER |
| Парткод: | JC97-01730A |
| Деталь: | SUPPORTER(T20N) |
| Парткод: | 6103-001048 |
| Деталь: | PMO-WINDOW SENSOR DEVE |
| Парткод: | JC72-00792A |
| Деталь: | PMO-CAM JAM REMOVE |
| Парткод: | JC72-00799A |
| Деталь: | PMO-LOCKER DEVE |
| Парткод: | JC72-00805A |
| Деталь: | PMO-LEVER JAM REMOVE |
| Парткод: | JC72-00804A |
| Деталь: | IPR-SHIELD SMPS LOWER |
| Парткод: | JC70-00247A |
| Деталь: | GEAR-PICK-UP |
| Парткод: | JC66-00335A |
| Деталь: | PMO-Bearing Shaft |
| Парткод: | JC72-41191A |
| Деталь: | GEAR-TRANSFER |
| Парткод: | JC66-40947A |
| Деталь: | MEC-ROLLER TRANSFER |
| Парткод: | JC75-00148A |
| Деталь: | MEA UNIT-HOLDER GEAR ASSY |
| Парткод: | JC97-01573A |
| Деталь: | MEA UNIT-HOLDER GND ASSY |
| Парткод: | JC97-01574A |
| Деталь: | ELA HOU-ADF ASSY |
| Парткод: | JC96-02742A |
| Деталь: | MEA UNIT-PLATEN COVER ASSY |
| Парткод: | JC96-02750A |
| Деталь: | ELA HOU-PLATEN ASSY |
| Парткод: | JC96-02754A |
| Деталь: | ELA HOU-PLATEN ASSY |
| Парткод: | TBD |
| Деталь: | PMO-TRAY EXTENTION MP NE |
| Парткод: | JC72-00354B |
| Деталь: | PMO-COVER PAPER EXIT |
| Парткод: | JC72-00786B |
| Деталь: | COVER-M-FRONT |
| Парткод: | JC63-00193A |
| Деталь: | MPR-NAME/PLATE XRX |
| Парткод: | TBD |
| Деталь: | PLATE-BADGE(XRX) |
| Парткод: | JC61-00777A |
| Деталь: | LAMP-HALOGEN (110V) |
| Парткод: | 4713-001170 |
| Деталь: | LAMP-HALOGEN(220V) |
| Парткод: | 4713-001171 |
| Деталь: | THERMOSTAT |
| Парткод: | 4712-000001 |
| Деталь: | GEAR-FUSER |
| Парткод: | JC66-40913B |
| Деталь: | ACTUATOR ASSY |
| Парткод: | JC97-01611A |
| Деталь: | THERMISTOR-FUSER |
| Парткод: | JC14-00001A |
| Деталь: | PMO-COVER SIMM,XRX |
| Парткод: | JC72-41224B |
| Деталь: | PMO-COVER REAR |
| Парткод: | JC72-00788A |
| Деталь: | FAN-DC |
| Парткод: | JC31-00012A |
| Деталь: | PMO-SHEET GUIDE PAPER |
| Парткод: | JC72-00836A |
| Деталь: | PMO-GUIDE CASSETTE RAIL |
| Парткод: | JC72-00791A |
| Деталь: | RUBBER-ROLLER PICKUP |
| Парткод: | JC73-00145A |
| Деталь: | Ring-E |
| Парткод: | 6044-000231 |
| Деталь: | SHAFT-PICK_UP SUB |
| Парткод: | JC66-00596A |
| Деталь: | SHAFT-PICK_UP MAIN |
| Парткод: | JC66-00595A |
| Деталь: | HOUSING-PICK_UP |
| Парткод: | JC61-00711A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | SPRING ETC-PLATE TR |
| Парткод: | JC61-70203A |
| Деталь: | SPRING ETC-TR_L |
| Парткод: | JC61-70961A |
| Деталь: | PMO-BUSH |
| Парткод: | JC72-40228A |
| Деталь: | PMO-HOLDER GND TR |
| Парткод: | JC72-00883A |
| Деталь: | SPRING ETC-TR_R |
| Парткод: | JC61-70906A |
| Деталь: | PMO-HOLDER GEAR TR |
| Парткод: | JC72-00884A |
Коды ошибок
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Описание
| Error code: | 01 |
| Display: | ERROR CONDITION INVALID HEAD |
| Description: | The ERROR light flashes. |
| Causes: | The printhead was replaced with one that is not a genuine Zebra™ printhead. |
| Remedy: | Install a genuine Zebra printhead. |
| Error code: | 02 |
| Display: | ERROR CONDITION RIBBON OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Remedy: | Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. |
| Error code: | 03 |
| Display: | WARNING RIBBON IN |
| Description: | The ERROR light flashes. |
| Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
| Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
| Error code: | 04 |
| Display: | ERROR CONDITION PAPER OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
| Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
| Error code: | 05 |
| Display: | ERROR CONDITION HEAD OPEN |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is not fully closed. The head open sensor is not working properly. |
| Remedy: | Replace the sensor. |
| Error code: | 06 |
| Display: | THERMISTOR FAULT |
| Description: | The ERROR light flashes. |
| Causes: | The printhead has a faulty thermistor. |
| Remedy: | Replace the printhead. |
| Error code: | 07 |
| Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
| Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
| Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 08 |
| Display: | WARNING HEAD COLD |
| Description: | The printer prints while the ERROR light flashes. |
| Causes: | The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 09 |
| Display: | WARNING HEAD TOO HOT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is over temperature. |
| Remedy: | Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature. |
| Error code: | 10 |
| Display: | DEFRAGMENTING |
| Description: | The printer stops. |
| Causes: | The printer is defragmenting memory. |
| Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 12 |
| Description: | General print quality issues |
| Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
| Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
| Error code: | 13 |
| Description: | Long tracks of missing print on several labels |
| Causes: | Print element damaged. |
| Remedy: | Replace the printhead. |
| Error code: | 14 |
| Description: | Wrinkled ribbon |
| Causes: | Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned. |
| Remedy: | See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance. |
| Error code: | 15 |
| Description: | Printing too light or too dark over the entire label |
| Causes: | The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure. |
| Remedy: | Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70. |
| Error code: | 16 |
| Description: | Smudge marks on labels |
| Causes: | The media or ribbon is not designed for high-speed operation. |
| Remedy: | Replace supplies with those recommended for high-speed operation. |
| Error code: | 17 |
| Description: | Misregistration/skips labels |
| Causes: | The printer is not calibrated. Improper label format. |
| Remedy: | Recalibrate the printer. Use correct label format. |
| Error code: | 18 |
| Description: | Misregistration and misprint of one to three labels |
| Causes: | The platen roller is dirty. Media does not meet specifications. |
| Remedy: | See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications. |
| Error code: | 19 |
| Description: | Vertical drift in top-of-form position |
| Causes: | The printer is out of calibration. Vertical drift occurs during normal printer operation. Note • A vertical drift of ± 4 to 6 dot rows (approximately 0.5 mm) is within normal tolerances. The platen roller is dirty. |
| Remedy: | Recalibrate the printer. Calibrate the printer. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. |
| Error code: | 20 |
| Description: | Vertical image or label drift |
| Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
| Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
| Error code: | 21 |
| Description: | The bar code printed on a label does not scan. |
| Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
| Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
| Error code: | 22 |
| Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
| Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
| Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
| Error code: | 23 |
| Description: | Auto Calibrate failed. |
| Causes: | Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly. |
| Remedy: | Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. |
| Error code: | 24 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light does not flash. |
| Causes: | The communication parameters are incorrect. |
| Remedy: | Check the printer driver or software communications settings (if applicable). If you are using serial communication, check the serial port setting in the control panel menu. See Set Serial Communications on page 91. If you are using serial communication, make sure you are using a null modem cable or a null modem adapter. Using the control panel controls, check the protocol setting. It should be set to NONE. See Set Protocol on page 93. If a driver is used, check the driver communication settings for your connection. |
| Error code: | 25 |
| Description: | A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label. |
| Causes: | The serial communication settings are incorrect. |
| Remedy: | Ensure that the flow control settings match. Check the communication cable length. See Table 5 on page 48 for requirements. Check the printer driver or software communications settings (if applicable). |
| Error code: | 26 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light flashes but no printing occurs. |
| Causes: | The prefix and delimiter characters set in the printer do not match the ones in the label format. Incorrect data is being sent to the printer. |
| Remedy: | Verify the prefix and delimiter characters. See Set Format Prefix Character on page 94 and Set Delimiter Character on page 95 for the requirements. Check the communication settings on the computer. Ensure that they match the printer settings. If the problem continues, check the label format. |
| Error code: | 27 |
| Description: | Broken or melted ribbon |
| Causes: | Darkness setting too high. |
| Remedy: | 1. Reduce the darkness setting. 2. Clean the printhead thoroughly. |
