Xerox Phaser 4600DT

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

275000

Скорость печати A4

Цветность печати

черно-белая

Общие характеристики
Число страниц в месяц	275 000
Печать фотографий
Телефон
Сканер
Копир
Факс
Размещение	настольный
Область применения	большой офис
Цветность печати
Тип устройства	Принтер
Макс. формат	A4
Тип	лазерный/светодиодный
Технология печати	лазерная
Принтер
Двусторонняя печать
Прямая печать
Время разогрева	54
Пигментные чернила
Печать без полей
Система непрерывной подачи чернил
Макс, разрешение для ч/б печати
По Y	1 200
По X	1 200
Скорость ч/б печати
A4	52
Время выхода первого отпечатка
Ч/б	7,8
Сканер
Стандарт TWAIN
Отправка изображения по e-mail
Стандарт WIA
Расходные материалы
Ресурс фотобарабана	80 000
Ресурс ч/б картриджа/тонера	13 000
Количество картриджей	1
Печать на:
Матовой бумаге
Глянцевой бумаге
Пленках
Этикетках
Карточках
Конвертах
CD/DVD
Рулоне
Фотобумаге
Плотность бумаги
Максимальная	220
Минимальная	60
Факс
PC Fax
Цветной
Телефон
Спикерфон
Автоответчик
Caller ID
АОН
Беспроводная трубка
Проводная трубка
Стандарт DECT
Шрифты и языки управления
Языки управления
PPDS
PostScript 2
PCL 5c
PCL 6
PostScript 3
PostScript
PDF
PCL 5e
Количество установленных шрифтов
PostScript	136
PCL	93
Лотки
Емкость лотка ручной подачи	100
Подача бумаги
Стандартная	1 200
Максимальная	3 750
Вывод бумаги
Максимальный	500
Стандартный	500
Финишер
Сортировка со сдвигом
Брошюровщик
Степлер
Сортер
Электронная сортировка
Интерфейсы
USB
Ethernet (RJ-45)
Bluetooth
Устройство для чтения карт памяти
Веб-интерфейс
RS-232
Инфракрасный порт
FireWire (IEEE 1394)
Wi-Fi
Wi-Fi 802.11n
AirPrint
LPT
Версия USB	2,0
Память/Процессор
Объем памяти	256
Частота процессора	700
Макс, объем памяти	768
Дополнительная информация
Экран
Работа от аккумулятора
Поддержка ОС
Mac OS
Windows
Linux
DOS
Потребляемая мощность
При работе	900
В режиме ожидания	93
Уровень шума
В режиме ожидания	39
При работе	54
Габариты
Ширина	476
Вес	46
Высота	566
Глубина	541

Коды ошибок

01-100-00

01-102-00

01-500-00

01-700-00

01-900-00

03-100-00, 03-110-00

03-115-00

03-120-00, 03-940-00

03-130-00, 03-950-00

03-140-00, 03-960-00

03-150-00, 03-965-00

03-160-00, 03-990-00

03-305-00

03-315-00, 03-325-00

03-335-00

03-410-00

03-420-00

03-430-00

03-440-00

03-450-00

03-470-00

03-480-00

03-600-00

03-800-00

03-970-00

04-100-00

04-110-00

04-200-00

04-300-00

04-400-00

04-500-00

04-730-00

04-810-00

04-930-00

06-100-00, 06-200-00

07-110-00

07-120-00

07-130-00

07-210-00

07-220-00

07-230-00, 07-231-00

07-310-00

07-320-00

07-330-00, 07-331-00

07-410-00

07-420-00

07-430-00, 07-431-00

07-500-00

07-510-00, 07-700-00

07-520-00

07-530-00

07-531-00, 07-630-00

07-710-00

07-720-00

07-730-00, 07-731-00

08-100-00

08-110-00

08-200-00

08-300-00

08-400-00

08-450-00

08-500-00

08-600-00

08-610-00

08-650-00

08-800-00

08-850-00

09-003-00

09-100-00

09-200-00, 09-220-00

09-210-00, 09-270-00

09-230-00, 09-250-00

09-240-00

09-271-00

09-290-00

09-300-00

09-400-00

09-500-00

09-508-00

09-589-00

09-590-00

09-591-00

09-600-00

09-700-00

09-800-00, 09-810-00

09-900-00, 09-910-00

09-920-00

10-100-00, 10-200-00, 10-300-00

10-308-00

10-500-00, 10-510-00

10-700-00, 10-710-00

12-100-00, 12-487-00

12-200-00

12-300-00, 12-488-00, 12-489-00

12-500-00

12-605-00

12-610-00, 12-855-00

12-715-00, 12-716-00

12-725-00, 12-726-00

12-735-00, 12-736-00

12-750-00, 12-755-00

12-760-00, 12-770-00

12-870-00

12-906-00, 12-907-00

12-910-00, 12-920-00, 12-930-00, 12-940-00

12-911-00, 12-921-00, 12-931-00, 12-941-00

12-912-00, 12-922-00, 12-932-00, 12-942-00

12-913-00, 12-923-00, 12-933-00, 12-943-00

12-915-00

12-925-00, 12-935-00

12-945-00, 12-955-00

15-110-00

15-120-00

15-300-00

15-310-00, 15-600-00

15-320-00, 15-330-00

15-700-00

17-100-00

17-110-00

17-120-00

17-200-00

17-700-00, 17-710-00

17-800-00, 17-810-00

17-900-00

17-910-00

Описание

Парткод

Название

XEROX Ролик захвата из кассеты

XEROX Ролик переноса

XEROX Емкость для отработанного тонера

XEROX Тонер-картридж черный (13000 стр.)

XEROX Тонер-картридж черный (30000 стр.)

XEROX Копи-картридж / фотобарабан

XEROX Комплект обслуживания 220V

XEROX Печка в сборе 220V

Error code:	01-100-00
Description:	Top Door Open.
Causes:	The Top Door is not latched.
Remedy:	• Close the Top Door. • Check for obstructions blocking the latch. Cycle system power. The error message is displayed. Y↓ N→Complete. Reseat the Toner Cartridge and close the Top Door. The error message is displayed. Y↓ N→Complete. Check the Top Door interlock actuators. The interlock actuators are undamaged. Y↓ N→Replace the Top Door. Select dC330 code 01-100. The switch is operational (open/closed). Y↓ N→Replace the Top Door Interlock Switch. Remove the Left Cover and check P/J45 and CN9 on the MCU Board. The connections are secure. Y↓ N→Secure the connections. Replace these components in order until the error is corrected. 1. Top Door Interlock Switch, PL 28.15 Item 2 2. MCU Board, PL 3.10 Item 3

Error code:	01-102-00
Description:	Rear Door Open.
Causes:	The Rear Door is not latched.
Remedy:	• Close the Rear Door. • Check for obstructions or bent pins in P/J61. Cycle system power. The error message is displayed. Y↓ N→Complete. Close the Rear Door. The error message is displayed. Y↓ N→Complete. Check the Rear Door connection P/J63. The connector is undamaged. Y↓ N→Repair or replace the Rear Door. Select dC330 code 01-300. The connection is operational (open/closed). Y↓ N→Repair or replace the Rear Door. Remove the Right Cover and check CN4 on the Joint Board. The connection is secure. Y↓ N→Secure the connections. Replace these components in order until the error is corrected. 1. Rear Door, PL 28.25 Item 1 2. Joint Board, PL 9.15 Item 7 3. Exit Assembly, PL 10.30 Item 25

Error code:	01-500-00
Description:	Finisher Door Open.
Causes:	The Finisher Rear Door is not latched.
Remedy:	• Close the Finisher Rear Door. • Check for obstructions blocking the sensor. Cycle system power. The error message is displayed. Y↓ N→Complete. Check the Rear Door sensor actuator. The actuator is undamaged. Y↓ N→Repair or replace the Finisher Rear Door. Select dC330 code 12-895. The sensor is operational (high/low). Y↓ N→Remove the Finisher Top Cover and check the Finisher Rear Door Open Sensor (PL 12.35 Item 14). The sensor connection is secure. Y↓ N→Secure the Finisher Rear Door Open Sensor connection. Check the Finisher option harness in the Finisher right cover. The harness is undamaged. Y↓ N→Repair or replace the Finisher option harness. Replace the Finisher Rear Door Open Sensor. Replace these components in order until the error is corrected. 1. Finisher Rear Door Open Sensor, PL 12.35 Item 14 2. Finisher Control Board, PL 12.15 Item 2 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3

Error code:	01-700-00
Description:	Stapler Door Open.
Causes:	The Staple Cartridge Door is not latched securely.
Remedy:	• Close and latch the Staple Cartridge Door. • Check for obstructions blocking the interlock switch. Y↓ N→Complete. Check the Staple Cartridge Door interlock actuator. The actuator is undamaged. Y↓ N→Repair or replace the Finisher right cover. Select dC330 code 12-870. The switch is operational (high/low). Y↓ N→Replace the Staple Cartridge Door Interlock Switch. Remove the Finisher Right Cover and check the Staple Cartridge Door Interlock Switch (PL 12.45 Item 4). The switch connections are secure. Y↓ N→Secure the Staple Cartridge Door Interlock Switch connections. Check the Finisher option harness in the Finisher right cover. The harness is undamaged. Y↓ N→Repair or replace the Finisher option harness. Replace these components in order until the error is corrected. 1. Staple Cartridge Door Interlock Switch (PL 12.45 Item 4) 2. Finisher Control Board, PL 12.15 Item 2 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3

Error code:	01-900-00
Description:	Mailbox Rear Door
Causes:	Open. The Mailbox Rear Door is not latched securely.
Remedy:	• Close the Mailbox Rear Door. • Check for obstructions blocking the interlock switch. Cycle system power. The error message is displayed. Y↓ N→Complete. Check the Mailbox Rear Door interlock actuator. The actuator is undamaged. Y↓ N→Repair or replace the Mailbox rear door. Select dC330 code 12-915. The switch is operational (high/low). Y↓ N→Replace the Mailbox Rear Door Interlock Switch. Remove the Mailbox top cover and check the Rear Door Interlock Switch (PL 11.30 Item 4). The switch connections are secure. Y↓ N→Secure the Mailbox Rear Door Interlock Switch connections. Check the Mailbox option harness in the Mailbox right cover. The harness is undamaged. Y↓ N→Repair or replace the Mailbox option harness, PL 11.15 Item 4. Replace these components in order until the error is corrected. 1. Mailbox Rear Door Interlock Switch, PL 11.30 Item 4 2. Mailbox Control Board, PL 11.15 Item 1 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3

Error code:	04-100-00
Description:	Tray 2 Lift Error
Causes:	Tray 2 Level Sensor did not change state within 13 seconds of Lift Motor activation.
Remedy:	• Remove and replace Tray 2. • Check for obstructions blocking bottom plate movement. Check Tray bottom plate linkage and sector gear condition. Use an alternate Tray, if available, to test lift operation.The Tray is undamaged. Y↓ N→Replace the Tray. Check Tray 2 pick assembly (PL 8.15) motion. Pick assembly motion is good. Y↓ N→Repair improper pick assembly motion. Check the Lift Gear, PL 4.10. The gear is undamaged and properly installed. Y↓ N→Replace the Lift Gear. Test Lift Motor operation. The Lift Motor rotates. Y↓ N→Remove the Right Cover , reseat CN11 on the MCU Board, then retest. The Lift Motor rotates. Y↓ N→Remove the MCU Board and reseat P/J49 on the Lift Motor, then retest. The Lift Motor rotates. Y↓ N→Replace the Lift Motor, then retest. The Lift Motor rotates. Y↓ N→Replace the MCU Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Tray 2. Tray 2 Level Sensor, PL 8.50 Item 25 3. MCU Board

Error code:	06-100-00, 06-200-00
Description:	LSU Error
Causes:	06-100-00 The Laser Unit has failed. The Laser Unit did not reach ready within a defined time. 06-200-00 LSU Hsync Error. The Laser Unit has failed.
Remedy:	• Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 06-100 to test the Laser Unit. The Laser Unit is operational (on/off). Y↓ N→Replace the Laser Unit , then retest. The Laser Unit is operational. Y↓ N→Replace the IP Board . Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions.

Error code:	07-130-00
Description:	Jam 0 in Tray 2
Causes:	Media present at the Take Away Sensor.
Remedy:	1. Check media condition. 2. Check for obstructions in the media path. Check the Nudger, Feed, and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Check Tray 2 pick assembly (PL 8.15) motion. Pick assembly motion is good. Y↓ N→Repair improper pick assembly motion. Select dC330 code 08-820 to test the Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 04-580 to test the Feed Drive Assembly. The Feed Drive Assembly rotates (on/off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.