Xerox WorkCentre 5019

Рейтинг

Снят с производства

Тип устройства

МФУ

Технология печати

лазерная

Макс. формат

Число страниц в месяц

18000

Цветность печати

черно-белая

Общие характеристики
Размещение	настольный
Область применения	малый офис
Цветность печати
Макс. формат	A3
Тип	лазерный/светодиодный
Технология печати	лазерная
Сканер
Копир
Телефон
Печать фотографий
Факс
Тип устройства	МФУ
Число страниц в месяц	18 000
Принтер
Система непрерывной подачи чернил
Прямая печать
Двусторонняя печать
Пигментные чернила
Печать без полей
Время разогрева	30
Макс, разрешение для ч/б печати
По X	600
По Y	600
Скорость ч/б печати
A3	10
Время выхода первого отпечатка
Ч/б	14
Копир
Время выхода первой копии	7,5
Макс, количество копий за цикл	999
Шаг масштабирования	0,01
Значение масштаба
Минимальное	0,25
Максимальное	4
Макс, разрешение (ч/б)
По X	600
По Y	600
Скорость ч/б копирования
A4	18
Сканер
Тип сканера	планшетный
Оттенки серого	256
Стандарт TWAIN
Стандарт WIA
Слайд-адаптер
Отправка изображения по e-mail
Макс. формат оригинала	A3
Макс, размер сканирования
По Y	432
По X	297
Разрешение сканера
По Х	600
Расходные материалы
Ресурс ч/б картриджа/тонера	9 000
Количество картриджей	1
Печать на:
Этикетках
Глянцевой бумаге
Карточках
Матовой бумаге
Конвертах
CD/DVD
Рулоне
Пленках
Фотобумаге
Плотность бумаги
Максимальная	110
Минимальная	60
Факс
PC Fax
Цветной
Телефон
Спикерфон
Беспроводная трубка
АОН
Caller ID
Стандарт DECT
Проводная трубка
Автоответчик
Языки управления
PostScript 3
PCL 5c
PCL 5e
PCL 6
PPDS
PDF
PostScript
PostScript 2
Лотки
Емкость лотка ручной подачи	100
Подача бумаги
Стандартная	350
Максимальная	850
Вывод бумаги
Максимальный	250
Стандартный	250
Финишер
Электронная сортировка
Брошюровщик
Степлер
Сортер
Сортировка со сдвигом
Интерфейсы
Версия USB	2,0
USB
Wi-Fi
Устройство для чтения карт памяти
Веб-интерфейс
RS-232
Инфракрасный порт
AirPrint
LPT
Bluetooth
Wi-Fi 802.11n
FireWire (IEEE 1394)
Ethernet (RJ-45)
Память/Процессор
Частота процессора	300
Объем памяти	128
Дополнительная информация
Работа от аккумулятора
Мин. системные требования	Intel Pentium II
Поддержка ОС
Windows
DOS
Linux
Mac OS
Потребляемая мощность
В режиме ожидания	5
При работе	525
Уровень шума
В режиме ожидания	28
При работе	58
Габариты
Вес	30
Высота	496
Глубина	595
Ширина	569

Коды ошибок

003-500, 003-795

003-754

003-942

003-951

003-963

003-972

003-973

004-345

005-122

005-123

005-125, 005-145

005-131, 005-132

005-134, 005-139

005-135

005-136

005-147

005-196

005-197

005-198, 005-199

005-210

005-275, 005-280

005-305

005-500

005-907, 005-908, 005-913

005-940

005-948

010-311

010-312

010-320

010-327

010-379

010-392

010-602

016-500

016-501

016-502

016-570

016-571

016-742, 016-744

016-749, 016-799

016-759

016-776

023-600

024-910, 024-911, 024-915

024-950, 024-951, 024-954

024-958, 024-959, 024-960

024-965

041-210, 041-211

042-325, 042-614

045-310

045-313

061-321

061-325

062-277

062-311

062-360

062-371, 062-380

062-386

062-389

062-396

071-105

072-102

072-105

072-210

072-212

072-215

075-135

077-101

077-103

077-104

077-106

077-129

077-212

077-300, 077-301, 077-305

077-900, 077-901, 077-904

091-313

091-401, 091-402

091-406, 091-424

091-430

091-440

091-441

091-914

091-915, 091-916

092-660, 092-668

092-661

092-910

093-312

093-400

093-406

093-912

093-956

093-959

095-910

116-321

116-323

116-334

116-377

116-747

117-326

123-314

Описание

Парткод

006R01573

013R00670

059K79560

Название

XEROX Тонер-картридж черный

XEROX Блок фотобарабана / Копи-картридж

XEROX Вал переноса

Error code:	003-500, 003-795
Description:	N-Up NG Out Of Range/ AMS NG Out Of Range [N-Up NG Out Of Range] During 2-Up or 4-Up, the reduce/enlarge ration was not within the range of 25 to 400%. [AMS NG Out Of Range] During AMS (Auto Magnification Selection), the reduce/enlarge ration was not within the range of 25 to 400%
Remedy:	Press [Stop] on the UI Panel and change the settings.

Error code:	003-754
Description:	IPS Overrun The IPS processing has overtook the Scan processing.
Remedy:	This might be avoided by setting the R/E ratio to 99% or 101%. If this occurs frequently, obtain the document from the User and contact the Support Department for assistance.

Error code:	003-942
Description:	Not-Supported Doc Size During DADF Scan of a Copy, Scan and Fax sending Job, an unsupported document size was detected.
Remedy:	1. Press [Stop] on the UI Panel. 2. Check the setting of the document size group. 3. Check whether the document size is a supported size. 4. If the document size is a supported size, the DADF might have malfunctioned. Refer to following FIP to check the DADF. • 005-196 (Size Mismatch Jam on No Mix-size) • 005-948 (SS-Size Mismatch Jam on No Mix-size)

Error code:	003-951
Description:	1Job Max Page Over During Copy Job, the number of pages that can be scanned has been exceeded.
Causes:	Out of paper in Tray 2. Defect of Tray 2 No Paper Sensor Disconnection of wires from Tray 2 No Paper Sensor J246 to MCU PWB J24 or loose connection Defect of MCU PWB
Remedy:	Press [Stop] on the UI Panel and reduce the number of document pages.

Error code:	003-963
Description:	APS NG Out Of Range During Copy Job, when APS is selected, the image size obtained from document size x reduce/enlarge ratio was detected to be larger than the largest Standard Paper Size.
Remedy:	Press [Stop] on the UI Panel and change the settings.

Error code:	016-500
Display:	Erase Flash Error Error 016-500 Restart Printer
Description:	Controller Download Flash Write Error Unable to write the Download File of Controller Main into the Flash ROM.
Causes:	SMTP server name is not correct. Set SMTP server name correctly or set by IP address.
Remedy:	1. Turn the power OFF and ON. (If the contents of the Flash ROM is corrupted, the machine will boot up in Emergency Boot Download mode after Power ON.) 2. If the problem persists, replace the ESS/MCU PWB (PL 18.3).

Error code:	003-972
Description:	Maximum Stored Page RAP 003-972 When scanning a document, the number of pages that has accumulated in the machine has exceeded the value of ’Maximum Stored Number of Copy Sheets’ set in system data.
Remedy:	1. Advise the customer to set the number of pages of the document to be within the maximum number of pages that can be stored. 2. Obtain the log file using the log tool. Perform 2.6 Log RAP • If there was a reboot after the error had occurred and hence was unable to obtain the log, set NVM (700-530) to “0” to perform log collection and return the NVM (700- 530) to “1” after completing the procedure. 3. Change any possible mechanical settings for corrective actions or detection conditions and repeat the operation. 4. Check the version of Controller ROM. If it is not the latest, download and update to the latest software revision. (Refer to GP 9 Firmware Version Upgrade) 5. Switch the power off then on.Get the procedures for reproducing an error according to the operation that was performed when the error occurred. a. Check the exact occurrence timing during job execution. b. Check the job settings from the Panel. c. Collect other information as much as possible to reproduce the error. 6. Obtain logs immediately after the error has occurred without turning the power off and on. Perform 2.6 Log RAP. 7. The ESS Board rarely fails, contact Technical Support for further instructions.

Error code:	003-973
Description:	Image Rotation RAP 003-973 The document and the image are different in orientation (except when poster is specified). When rotation is not available even though the orientation of the document and the image are different and part of the image will be lost if it is not rotated.
Remedy:	1. Advise the customer to verify the image loss and use a larger paper size if available. Or use reduction to make a smaller document, then retry the job. 2. Obtain the log file using the log tool. Perform 2.6 Log RAP • If there was a reboot after the error had occurred and hence was unable to obtain the log, set NVM (700-530) to “0” to perform log collection and return the NVM (700- 530) to “1” after completing the procedure. 3. Change any possible mechanical settings for corrective actions or detection conditions and repeat the operation. 4. Check the version of Controller ROM. If it is not the latest, download and update to the latest software revision. (Refer to GP 9 Firmware Version Upgrade) 5. Switch the power off then on.Get the procedures for reproducing an error according to the operation that was performed when the error occurred. a. Check the exact occurrence timing during job execution. b. Check the job settings from the Panel. c. Collect other information as much as possible to reproduce the error. 6. Obtain logs immediately after the error has occurred without turning the power off and on. Perform 2.6 Log RAP. 7. The ESS Board rarely fails, contact Technical Support for further instructions.

Error code:	005-122
Description:	DADF Simplex/Side 1 Pre Registration Sensor On Jam RAP • After Pre-Feed started for the first sheet (DADF Feed Motor On (CW)) in Simplex and Duplex, the DADF Pre Registration Sensor did not turn ON within the specified time. • After Pre-Feed started for the second sheet onwards (DADF Feed Motor On (CW)) in Duplex, the DADF Pre Registration Sensor did not turn ON within the specified time.
Remedy:	Open the Top Cover and remove the Invert Chute. Enter the Diag Mode, turn ON Component Control [005-206]. Block the DADF Pre Registration Sensor using a sheet of paper, etc. Does the display change to High? Y↓N→Disconnect the DADF Pre Registration Sensor connector P/J774. Does the display change to High? Y↓N→Check the wire between the DADF Pre Registration Sensor P/J774-2 and the DADF PWB P/J757-11 for a short circuit. If no problems are found, replace the DADF PWB (PL 51.2). Is the voltage between P/J774-1 (+) and P/J774-3 (-) +5VDC? Y↓N→Check the wires between the DADF PWB P/J757-12 and the DADF Pre Registration Sensor P/J774-1, as well as between the DADF PWB P/J757-10 and the DADF Pre Registration Sensor P/J774-3 for open circuits and poor contacts. Replace the DADF Pre Registration Sensor (PL 51.17). Press the Stop button. Turn ON Component Control [005-010] (DADF Feed Motor). Does the DADF Feed Motor operate? Y↓N→Is the voltage between the DADF Feed Motor P/J776-5/2 (+) and the GND (-) +24VDC? Y↓N→Is the voltage between the DADF PWB P/J754-B1/B2 (+) and the GND (-) +24VDC? Y↓N→Is the voltage between the DADF PWB P/J753-2 (+) and the GND (-) +24VDC? Y↓N→Refer to BSD 5.1 - Document Setting and check the +24VDC circuit to the DADF PWB P/J753-2. Replace the DADF PWB (PL 51.2). Check the wires between the DADF PWB P/J754-B1 and the DADF Feed Motor P/ J776-5, as well as between the DADF PWB P/J754-B2 and the DADF Feed Motor P/J776-2 for an open circuit and poor contact. Turn OFF the power and disconnect P/J754 from the DADF PWB. Measure the wire wound resistance of the Motor. • Between P/J754 pin-B1 and P/J754 pin-B5/B6 • Between P/J754 pin-B2 and P/J754 pin-B3/B4 Is the resistance approximately. 1Ohm for each? Y↓N→Replace the DADF Feed Motor (PL 51.5). Replace the DADF PWB (PL 51.2). Check the following: • The document path for foreign substances. • Overly strong Retard pressure. • The DADF Pre Registration Sensor Actuator for disengagement, drag and damage.

Error code:	005-123
Description:	DADF Simplex/Side 1 Registration Sensor On Jam RAP After Pre Registration operation started (DADF Feed Motor On (CCW)), the DADF Registration Sensor did not turn ON within the specified time.
Remedy:	Open the Top Cover and remove the Invert Chute. Enter the Diag Mode, turn ON Component Control [005-110]. Turn ON the DADF Registration Sensor using a sheet of paper, etc. Does the display change to "H" (opposite to the voltage level)? Y↓N→Remove the DADF Rear Cover. Is the voltage between the DADF PWB P/J757-14 (+) and the GND (-) +5VDC? Y↓N→Replace the DADF PWB (PL 51.2). The voltage between the DADF Registration Sensor P/J775-2 (+) and the GND (-) +5VDC? Y↓N→Check the connection between the DADF Registration Sensor P/J775-2 and the DADF PWB P/J757-14 for an open circuit and poor contact. The voltage between the DADF Registration Sensor P/J775-1 (+) and P/J775-3 (-) +5VDC? Y↓N→Check the wires between the DADF PWB P/J757-15 and the DADF Registration Sensor P/J775-1, as well as between the DADF PWB P/J757-13 and the DADF Registration Sensor P/J775-3 for open circuits and poor contacts. Replace the DADF Registration Sensor (PL 51.17). Press the Stop button. Turn ON Component Control [005-008] (DADF Feed Motor). Does the DADF Feed Motor operate? Y↓N→The voltage between the DADF Feed Motor P/J776-5/2 (+) and the GND (-) +24VDC? Y↓N→The voltage between the DADF PWB P/J754-B1/B2 (+) and the GND (-) +24VDC? Y↓N→The voltage between the DADF PWB P/J753-2 (+) and the GND (-) +24VDC? Y↓N→Refer to BSD 5.1 - Document Setting and check the +24VDC circuit to the DADF PWB P/J753-2. Replace the DADF PWB (PL 51.2). Check the wires between the DADF PWB P/J754-B1 and the DADF Feed Motor P/ J776-5, as well as between the DADF PWB P/J754-B2 and the DADF Feed Motor P/J776-2 for an open circuit and poor contact. Turn OFF the power and disconnect P/J754 from the DADF PWB. Measure the wire wound resistance of the Motor. • Between P/J754 pin-B1 and P/J754 pin-B5/B6 • Between P/J754 pin-B2 and P/J754 pin-B3/B4 The resistance approximately 1Ohm for each? Y↓N→Replace the DADF Feed Motor (PL 51.5). Replace the DADF PWB (PL 51.2). Check the following: • The document path for foreign substances. • The Transportation Roll for contamination, wear or revolution failure.